Electronic & Electrical Services

ER-QA-01C: 1. Bias Repeatability: 40μg; 2. Scale Factor Repeatability: 40ppm; 3. Low Cost & high Performance. ER-QA-01C Low Cost Quartz Accelerometer ER-QA-01C Low Cost Quartz Accelerometer can be widely used in inertial navigation system which has wide application in aerospace vehicles, inertial navigation system and control system of ships. Composition and characteristics: Quartz flexible pendulum accelerometer is composed of a meter head and a matching circuit. The head part of the watch is composed of inertia mass pendulum (with torque coil), torque tester, position detector, quartz pendulum plate, etc. Quartz flexible pendulum accelerometer is characterized by small size, high precision, fast start, impact resistance, and can meet the requirements of a variety of carriers and inertial systems. Applications Navigation system of tank Military vehicle

Minimum Order: 1 bags

Description The ADAU1701 is a complete single-chip audio system with a 28-/56-bit audio DSP, ADCs, DACs, and microcontroller-like control interfaces. Signal processing includes equalization, crossover, bass enhancement, multiband dynamics processing, delay compensation, speaker compensation, and stereo image widening. This processing can be used to compensate for real-world limitations of speakers, amplifiers, and listening environments, providing dramatic improvements in perceived audio quality. Its signal processing is comparable to that found in high end studio equipment. Most processing is done in full 56- bit, double precision mode, resulting in very good low level signal performance. The ADAU1701 is a fully programmable DSP. The easy to use SigmaStudio™ software allows the user to graphically configure a custom signal processing flow using blocks such as biquad filters, dynamics processors, level controls, and GPIO interface controls. ADAU1701 programs can be loaded on power-up either from a serial EEPROM through its own self-boot mechanism or from an external microcontroller. On power-down, the current state of the parameters can be written back to the EEPROM from the ADAU1701 to be recalled the next time the program is run. Two Σ-Δ ADCs and four Σ-Δ DACs provide a 98.5 dB analog input to analog output dynamic. Each ADC has a THD + N of −83 dB, and each DAC has a THD + N of −90 dB. Digital input and output ports allow a glueless connection to additional ADCs and DACs. The ADAU1701 communicates through an I 2 C® bus or a 4-wire SPI port

Shanghai Longyue Instrument Equipment Co., Ltd. is located in Songjiang District, Shanghai. It is a high-tech and high-efficiency entity integrating product development, production, sales and service. The company specializes in the production of "Longyue" brand: anaerobic culture system, carbon dioxide cell incubator, constant temperature shaker, artificial climate chamber, constant temperature and humidity chamber, drug stability test chamber, high and low temperature alternating box and other laboratory equipment. In the past 2 years, more than 10 national patents (1 invention patent) have been obtained. The anaerobic culture system based on carbon dioxide concentration control and humidity control won the 2016 Shanghai Innovation and Entrepreneurship Award, which is the domestic leading product; the newly designed N series The shape and performance of artificial climate chamber and carbon dioxide cell incubator can replace imported products.

Product Description TL494CDR TL494CD TL494ID TL494C TL494 AZ494 KIA494 SOP-16 In Stock Switching Controllers TL494IDRE4 TL494IDG4 TL494IDRG4 TL494 Pulse-Width-Modulation Control Circuits Applications • Desktop PCs • Microwave Ovens • Power Supplies: AC/DC,Isolated,With PFC,> 90 W • Server PSUs • Solar Micro-Inverters • Washing Machines: Low-Endand High-End • E-Bikes • Power Supplies: AC/DC,Isolated,No PFC,< 90 W • Power:Telecom/Server AC/DC Supplies:Dual Controller: Analog • Smoke Detectors • Solar Power Inverters Data sheet: Product Category Switching Controllers Series TL494ID Topology Boost, Buck, Flyback, Forward, Push-Pull Package / Case SOP-16 Mounting Style SMD/SMT Height 1.58 mm Length 9.9 mm Type Voltage Mode PWM Controllers Fall Time 40 ns Rise Time 100 ns TL494C Power Regulator IC TL494CDR SOP 16 TL494ID AZ494 Switching Controllers 0 TL494C Power Regulator IC TL494CDR SOP 16 TL494ID AZ494 Switching Controllers 1

Nema23 2Phase Stepper Motors 2 phase stepper two phase stepper motor supply stepper motor manufacturer Mini stepper motor, Small size, High torque, Low noise, Step Angle: 1.8°, NEMA11, 57x57mm Features: STEP ANGLE:  1.8° FLANGE SIZE:  57mm HOLDING TORQUE: 0.35-2.6Nm High Torque Low Heat High Stability Most popular models are available: nema 23 3nm, nema 23 112mm, nema 23 76mm, nema 23 stepper motor 425oz, nema 23 3a, nema 23 4a, nema 23 4.2 a, etc.  Nema23 motors are high-performance, low-cost stepper motors made by ICAN using high-quality core materials. It has the advantages of high torque, low heat generation, and good running stability.   Torque is the rotational equivalent of linear force, forms part of the basic specification of a motor. The torque of the motor refers to the torque output by the motor from the crankshaft end. It reflects the load capacity of the motor within a certain range. High torque is mainly attributed to many factors including rare earth magnets, optimized rotors, Stators with maximum winding fill, and laminations, all of which are combined together to realize maximum torque. Increase the output torque of the stepper motor, which means that the efficiency of the motor is higher, and is available without increasing the drive voltage or current. Improved manufacturing process enables all components of the stepper motor to achieve better matching and a more stable internal structure. Effectively reduce the vibration and noise of the motor during operation. With the advanced current control technology of IRELIA MR series drives, which makes ICAN stepper motor stand out by providing lower noise and smoother operation

2Phase Stepper Motors 2 Phase Stepper Driver supplier 2 phase hybrid stepper motor ICAN Tech offers complete stepper products including 2phase stepper motors, 3phase stepper motors, geared stepper motors and liner stepper motors. Our stepper products are well known for their high performance, reliability, and cost saving. Features: Adapt to various digital or economical two-phase stepper motor drivers. Low-temperature rise and stable operation. Economical. The complete product line has a rich variety. High torque and low noise. Stepper series motors are high-performance, low-cost stepper motors made by ICAN using high-quality core materials. It has the advantages of high torque, low heat generation, and good running stability.  Our company has strict quality control to ensure high-quality batch consistency of motors. This series of stepping motors are stable and reliable, with superior performance parameters. Features Sewing machine stepper motor Economical two-phase stepper motor products Adapt to various digital or economical two-phase stepper motor drivers High torque and low noise Small temperature rise, stable operation Customization is available Application ICAN stepper motor is widely used in engraving machines, 3D printers, CNC machine tools, medical equipment, electronic processing equipment, automated production lines, and other automated equipment. High quality two phase stepper motor supply! High holding torque stepper motor is one of our main product, our stepper products are well known for their high performance, reliability, and cost saving. Located in Dongguan city (“the world factory”), as a stepper motor manufacturer, stepper motor manufacturers, planetary gear reducer manufacturer, bldc motor manufacturer, we demonstrate our professionalism in OEM/ODM production in the past 9 years. If you are interested in stepping motor, please click here to visit our website. https://ican-motor.com/home/hy , brid-stepper-motors/two-phase-stepper-motor/

3Phase Stepper Motors 3 Phase Stepper Motors Driver hybrid stepper motors for sale Features: Powerful. 3phase motor offers a high power density. Silent. Economical. Easy to control. High torque and low noise. Compared with the two phase stepper motor, three phase stepper motor is more precision, reliability, and smoothly. Choose us, you can be get most careful and thoughtful service! Located in Dongguan city (“the world factory”), as a stepper motor manufacturer, stepper motor manufacturers, planetary gear reducer manufacturer, bldc motor manufacturer, we demonstrate our professionalism in OEM/ODM production in the past 9 years. If you are interested in stepping motor, please click here to visit our website. https://ican-motor.com/home/hy , brid-stepper-motors/3phase-stepper-motors/

nema 23 closed loop nema 23 closed loop stepper nema 23 motor driver nema 23 stepper motor driver Industry-leading algorithm The SS57 closed-loop stepper motor driver uses a high-characteristic photoelectric encoder to feedback the position to the Cotex-M4 ARM core processor. The position is adjusted in real-time every 50us, and it can respond quickly to position commands. The position response speed is better than that of various types that have appeared on the the market for many years. It can make the equipment have higher processing accuracy, higher-finish, and more perfect product details. Automatic current adjustment The SS57 closed-loop stepper motor driver can automatically adjust the step length and automatically adjust the current according to the load. Under low load conditions, the current is automatically adjusted to the lowest level, thereby reducing motor noise and heat. When the the load is suddenly increased, the current is fast and real-time Adjust to the optimal value to maintain high- precision position control and high-speed operation without losing a step. The motor stops stably without any shaking The SS57 closed-loop stepper motor driver continuously feedbacks through the encoder to detect the difference between the reference position and the actual position. When the closed-loop stepper motor reaches the target position, it stops stably without any vibration and becomes the series of SS hybrid servo motors (closed-loop step Into the motor) is one of the biggest advantages different from the traditional servo motor. No need for parameter tuning design The closed-loop stepper motor driver is simple to use and doesn’t require parameter settings. The traditional servo position PID algorithm needs to adjust the control parameters according to the load to produce the best control effect. The tuning process is complicated. The SS42 closed-loop stepper motor driver realizes the fast positioning of the closed-loop stepper motor through precise step adjustment technology, almost no need Tuning the control parameters of the position loop avoid the trouble of parameter setting adjustments during customer use. The closed-loop stepper motor driver is simple to use and doesn’t require parameter settings. nema 23 encoder is one of our main product, our company is a leader in the industry and we will not disappoint you. Located in Dongguan city (“the world factory”), as a stepper motor manufacturer, stepper motor manufacturers, planetary gear reducer manufacturer, bldc motor manufacturer, we demonstrate our professionalism in OEM/ODM production in the past 9 years. https://ican-motor.com/product/close , d-loop-stepper-motor-nema23

Nema17 2Phase Stepper Motors nema 17 motor nema 17 stepper motor with encoder 2 Phase Stepper Motors supplier NEMA 17 1.8 degree, High torque, Low noise, Step Angle: 1.8°, NEMA17, 42x42mm Features: STEP ANGLE:  1.8° FLANGE SIZE:  42mm HOLDING TORQUE: 0.19-0.75Nm High Torque Low Heat High Stability Share this entry NEMA 17 hybrid stepper motor series motors are high-performance, low-cost stepper motors made by ICAN using high-quality core materials. It has the advantages of high torque, low heat generation, and good running stability.  Our company has strict quality control to ensure high-quality batch consistency of motors. This series of stepping motors are stable and reliable, with superior performance parameters. Torque is the rotational equivalent of linear force, forms part of the basic specification of a motor. The torque of the motor refers to the torque output by the motor from the crankshaft end. It reflects the load capacity of the motor within a certain range. High torque is mainly attributed to many factors including rare earth magnets, optimized rotors, Stators with maximum winding fill, and laminations, all of which are combined together to realize maximum torque. Increase the output torque of the stepper motor, which means that the efficiency of the motor is higher, and is available without increasing the drive voltage or current. Improved manufacturing process enables all components of the stepper motor to achieve better matching and a more stable internal structure. Effectively reduce the vibration and noise of the motor during operation. With the advanced current control technology of IRELIA MR series drives, which makes ICAN stepper motor stand out by providing lower noise and smoother operation The high-strength die-casting end cover design and the low-loss stator lamination design make the stepper motor better thermal conductivity. The optimized stator slot full rate makes the stepper motor generate lower heat and faster heat conduction, thereby greatly reducing the temperature rise of the motor. ICAN Technology Co., Ltd is a high-tech enterprise, which is committed to developing, designing, and manufacturing stepper motor, BLDC motor, motor driver, closed-loop system, and gearbox. Since founded in 2009, we have serves in many applications, such as CNC routers, laser cutters/engravers/markers, 3D printers, electronics equipment, medical equipment, packaging equipment, AVG, textile machines, robotics, and pick-and-place devices. Till now, there are many clients of ours in the world, such as the U.S.A, Italy, Korea, Spain, France, Japan, etc. Our website: ican-motor.com

Nema34 2Phase Stepper Motors stepper motors for sale Nema34 stepper motor supplier High torque, Low noise, Step Angle: 1.8°, NEMA34, 85x85mm Features: Nema 34 stepper motor cnc kit STEP ANGLE:  1.8° FLANGE SIZE:  85mm HOLDING TORQUE: 3.4-12Nm, nema 34 12 nm Low Heat High Stability Share this entry Ican-Nema23 stepper motor Description Stepper series motors are high-performance, low-cost stepper motors made by ICAN using high-quality core materials. It has the advantages of high torque, low heat generation, and good running stability.  Our company has strict quality control to ensure high-quality batch consistency of motors. This series of stepping motors are stable and reliable, with superior performance parameters. Torque is the rotational equivalent of linear force, forms part of the basic specification of a motor. The torque of the motor refers to the torque output by the motor from the crankshaft end. It reflects the load capacity of the motor within a certain range. High torque is mainly attributed to many factors including rare earth magnets, optimized rotors, Stators with maximum winding fill, and laminations, all of which are combined together to realize maximum torque. Increase the output torque of the stepper motor, which means that the efficiency of the motor is higher, and is available without increasing the drive voltage or current. Improved manufacturing process enables all components of the stepper motor to achieve better matching and a more stable internal structure. Effectively reduce the vibration and noise of the motor during operation. With the advanced current control technology of IRELIA MR series drives, which makes ICAN stepper motor stand out by providing lower noise and smoother operation The high-strength die-casting end cover design and the low-loss stator lamination design make the stepper motor better thermal conductivity. The optimized stator slot full rate makes the stepper motor generate lower heat and faster heat conduction, thereby greatly reducing the temperature rise of the motor. ICAN Technology Co., Ltd is a high-tech enterprise, which is committed to developing, designing, and manufacturing stepper motor, BLDC motor, motor driver, closed-loop system, and gearbox. Since founded in 2009, we have serves in many applications, such as CNC routers, laser cutters/engravers/markers, 3D printers, electronics equipment, medical equipment, packaging equipment, AVG, textile machines, robotics, and pick-and-place devices. Till now, there are many clients of ours in the world, such as the U.S.A, Italy, Korea, Spain, France, Japan, etc. https://ican-motor.com/product/2phase- , stepper-motors-nema34/

Stepper With Spur Gearbox geared BLDC motor Geared stepper motor for sale This type of geared stepper motor has been optimized and is made of high- quality 0.35MM silicon steel sheet and rare earth magnetic steel. The air gap is small and the torque is large. It has the advantages of high anti-resonance characteristics and low heat generation. Features: High torque and low noise. Low-temperature rise and stable operation. Economical. Low speed with low vibration Customization is available Gearbox is a mechanical unit or component consisting of a series of integrated gears within a housing. In the most basic sense, a gearbox functions like any system of gears, it alters torque and speed between a driving device like a motor and a load. Spur gearboxes, smooth and quiet operation, wide range of gear ratios, long life, and maximum efficiency. The role of spur gearbox Stepper motors are known for their accurate positioning capabilities and high torque delivery at low speeds, but they require careful sizing to ensure the motor matches the load and application parameters, to minimize the possibility of lost steps or motor stalling. Adding a gearbox to a stepper motor system can improve the motor’s performance by decreasing the load-to-motor inertia ratio, increasing torque to the load, and reducing motor oscillations. Ican-Geared Stepper Motors Feature High torque and low noise. Low-temperature rise and stable operation. Economical. Low speed with low vibration Self-detection, over-current, over-voltage, under-voltage protection Customization is available Application ICAN geared stepper motor is widely used in cars, robots, packaging industry, automated production lines, and other automated equipment. Located in Dongguan city (“the world factory”), as a stepper motor manufacturer, stepper motor manufacturers, planetary gear reducer manufacturer, bldc motor manufacturer, we demonstrate our professionalism in OEM/ODM production in the past 9 years. If you are interested in stepping motor, please click here to visit our website. https://ican-motor.com/product , /stepper-with-spur-gearbox/

Planetary gear stepper motor geared bldc motor supply geared brushless dc motor planetary gear reducer manufacturer This type of planetary gear stepper motor has been optimized and is made of high-quality 0.35MM silicon steel sheet and rare earth magnetic steel. The air gap is small and the torque is large. It has the advantages of high anti- resonance characteristics and low heat generation. Feature High torque and low noise. Low-temperature rise and stable operation. Economical. Low speed with low vibration Self-detection, over-current, over-voltage, under-voltage protection Customization is available Application Ican-Geared Stepper Motors is widely used in cars, robots, packaging industry, automated production lines, and other automated equipment. ICAN Technology Co., Ltd is a high-tech enterprise, which is committed to developing, designing, and manufacturing stepper motor, BLDC motor, motor driver, closed-loop system, and gearbox. Since founded in 2009, we have serves in many applications, such as CNC routers, laser cutters/engravers/markers, 3D printers, electronics equipment, medical equipment, packaging equipment, AVG, textile machines, robotics, and pick-and-place devices. Till now, there are many clients of ours in the world, such as the U.S.A, Italy, Korea, Spain, France, Japan, etc. Our website: ican-motor.com

External Linear Stepper Motor stepper driver supplier Nema17 Closed Loop stepper motor The external linear actuators incorporate a rotary lead screw and an external translating nut Nema 17 lead screw stepper motor is a stepper motor with lead screw, it can be used in high-precision requirements Customization is available to base on the following parameters: Lead screw sizes, such as length, diameter, lead, and pitch Nuts material, such as POM, copper Motor leads, such as lengths, cables, and various connectors Encoders, brakes Waterproof, dustproof, and rustproof treatment ICAN Technology Co., Ltd is a high-tech enterprise, which is committed to developing, designing, and manufacturing stepper motor, BLDC motor, motor driver, closed-loop system, and gearbox. Since founded in 2009, we have serves in many applications, such as CNC routers, laser cutters/engravers/markers, 3D printers, electronics equipment, medical equipment, packaging equipment, AVG, textile machines, robotics, and pick-and-place devices. Till now, there are many clients of ours in the world, such as the U.S.A, Italy, Korea, Spain, France, Japan, etc. If you have any interest, contact us freely! Our website: ican-motor.com