Electric Power Tools

Power Wire Wound Chip Resistors Operating Temperature Range:-55~ +200 °C; Resistance:0.1Ω~680Ω Tolerance: ±1%,±5% Wattage:2W~3W Structure: Terminal: Terminal is to be firmly connected with resistors element, both electrically and mechanically, and allow easy soldering. Coating: Flameproof UL94V0 molded package, resistant to heat, humidity & insulation. Marking: Marking is made on the surface with Rated Wattage, Nominal Resistance and Tolerance. Operating Temperature Range: -55℃～200℃ Rated Load: When the resistors are applied rated voltage for 30 minutes continuously, it shows no evidence of arc, flame...etc. Removing the voltage and place the resistors to the normal condition for 30 minutes, the resistance value change rate between pre-and-post test shall be within ±1%. Let us go visit.

Minimum Order: 1 bags

RSSF Anti-Pulse Non-Inductive Resistors(Small Tyep） Operating Temperature Range:-55~ +155 °C; Resistance:0.22Ω~200KΩ Tolera , nce: ±2 ±5% Wattage:1/4W~3W This standard specification is for use in consumer electronics, computers, telecommunications, control instruments...etc. STRUCTURE: Ceramic Rod: It is made of Forsterite imported from Japan. Terminal: Terminal is to be firmly connected with resistors element, both electrically and mechanically, and allow easy soldering. Coating: Coating is done by light gray flameproof paint for NRSN type and dark gray flameproof for NRSS (resistant to 800℃) which is solid enough to be free from looseness, crack and easy breakage. It is also resistant to cleaning and industrial solvents, and the paint shall be limited within 2mm of lead wires from resistor body. Marking: Marking is made on resistors surface, by five color coding; 1st, 2nd, 3rd: nominal resistance, 4th: tolerance, 5th: white for Non-Inductive resistors. https://www.aillen.com/Film/

Minimum Order: 1 bags

Standard atmospheric conditions Unless otherwise specified, the standard range of atmospheric conditions for making measurementsand tests is as follows: Ambient temperature : 15°c to 35°C Relative humidity : 45% to 85% Air pressure : 86kPa to 106kPa If there is any doubt about the results, measurement shall be made within the followingconditions:Ambient temperature : 20°C to 2°C Relative humidity : 60% to 70% Air pressure : 86kPa to 106kPa Operating temperature range The ambient temperature range at which the capacitor can be operated continuously at ratedvoltageis (6.3~63WV) -55C to 105C When using Aluminum Electrolytic Capacitors,please pay attention to the points listed below. If the following types of electrical loads are applied to Aluminum Electrolytic Capacitors,rapiddeterioration of electrical property occurs:  1. Reverse voltage  2. Overvoltage exceeding rated working voltage 3. Current exceeding rated ripple current  4. Severe charging/discharging At such times,severe heat is generated,gas is emitted,then electrolyte leaks fromthe sealedarea,andpressure relief vent operates due to increase of internal pressure.In the worst case,explosionor ignitonmay occur,and along with destruction of the capacitor combustibles. More information please click here.

Minimum Order: 1 bags

High density and high efficiency, ceramic condensers are used. Wihich provides product with high electrical precision,stability and reiliability. For general digital circuit.;power supply bypass capacitors.;consumer electronics; telecommunication. Which can reduce voltage concentrations by distributing voltage gradients throughout the entire capacitor. This special design also affords increased capacitance values in a given case size and voltage rating. Capacitors with X7R dielectrics are not intended for AC line filtering applications. Capacitors may require protective surface coating to prevent external arcing. Size:0201~1812 Capacitance:0.5pF , ~1.0uF Voltage: 1000~4000V https://www.aillen.com/mlcc/high-vol , tage.html

Minimum Order: 1 bags

200x120x75mm enclosure case electronics project boxes electrical enclosure manufacturer ABS enclosure Waterproof box IP65 Description for waterproof junction box: Easy and safe to use Branch line runs parallel to the main cable High moisture resistance and excellent mechanical protection Full range of sizes available Materials: ABS Customized designs are accepted Product Description of 200x120x75mm enclosure case electronics project boxes electrical enclosure manufacturer Model Number 200B-1 External size 200x120x75mm Material ABS, 100% raw material Protection Level IP65 colour Grey, can be customzied component enclosure, gasket, screws MOQ 10pcs OEM/ODM cut holes, print logo, develop new enclosure as per your design Lead time 3-15days for different order Delivery terms FEDEX/TNT/UPS/DHL/China air post/ Sea,etc. Payment terms T/T,Paypal,Western Union

The model Q50A current probe is designed for fast and easy measure the current in industrial and power environment. It has wide range of current measurement from 1mA to 1000A, High precision 0.1%, easy operation for measurement instruments. FEATURES Holding wire diameter: φ50mm; Frequency 40Hz-20kHz Bandwidth; Conforms to EN 61010, 600V CAT III; Low phase shift for power measurement; IIndustrial design & beautiful appearance; Improved ergonomic design & easy operation; High precision 0.1% for current measurement; Basic parameters : Ratio:1000: 1 or 2000:1 (customized) Accuracy class:0.1%, 0.2%, 0.5% Primary current:0 - 1000A AC Secondary current:0-1A AC, 0 - 5A AC (customized) Max. Cont. Input current:1200A Frequency range:40Hz-20KHz Weight (g):550 info@gfuve.com 86-15910663251 htt , ps://www.gfuvegroup.com/ac-current-clamp/1000a-1a- , wide-range-measuring-ac- current-probe.html

Minimum Order: 1 bags

The S50 Series AC current clamp on CT along with the high content permalloy core makes them well suited for power quality applications.The S50 clamp on ct is a general purpose 1200A AC current clamp designed for use with DMMs & BNC, power loggers and energy meter calibration instruments that have a current input. FEATURES UL, CE CNAS mark; High content permalloy core; Holding wire diameter: φ52mm; Conforms to EN 61010, 600V CAT III; Low phase shift for power measurement; Industrial design & beautiful appearance; Improved ergonomic design & easy operation; Basic parameters : Ratio:1000: 1 , 2000:1, 1000:5 (customized) Accuracy class:0.1%, 0.2%, 0.5% Primary current: 0 - 500A AC and 0-1000A AC Secondary current: 0-1A or 0-5A AC Secondary voltage:0 - 0.5V AC and 0 - 1V AC; Load capacity:≤20Ω, standard 4Ω Over voltage category:CAT III 600V info@gfuve.com 86-15910663251 https: , //www.gfuvegroup.com/ac-current-clamp/1200a-2mhz-b , andwidth-oscilloscope- ac-current-clamp-on-ct.h , tml

Minimum Order: 1 bags

I. Introduction Tubing swage is a tool to shape the changed diameter of to guarantee that the downhole device can pass smoothly or to get through the flavedo-type blocks at the end of tubing. II. General Technical Parameters OD Fishing neck Connection t PN 1.25＂-1.5＂ 1.187＂ 15/16-10UN W21-03.**.00 1.5＂-2＂ 1.375＂ 15/16-10UN W21-03.**.00 2＂-2.5＂ 1.375＂ 15/16-10UN W21-03.**.00 2.5＂-3＂ 1.75＂ 1-1/16-10UN W21-03.**.00 3＂-4＂ 1.75＂ 1-1/16-10UN W21-03.**.00 4＂-5＂ 2.313＂ 1-9/16-10UN W21-03.**.00 Note:more customized parts are available upon request. III. Structural features: The top of the tubing swage has external threads (or quick male joint) and fishing neck; the inner diameter of waist is about equal to that of the deformed oil pipe, so there are air holes or drain holes in the middle, and the pipe tapers off from the middle to both ends; the bottom also can be processed with threads to connect with tools. The whole body of tubing swage is made of alloy steel, and the hardness of the part for shaping reaches 43～45HRC through quenching and tempering. Welcome to contact us at any time.

Jessica (manager) - Online Time 8:30AM-18:00PM 1)Email : sales3@amikon.cn  2)Wechat : hu18030235311 3)Skype : jessica01235483 4)Mobile : 86-18030235311 Now introduce the details of the product Triconex (USA) Good price within limited time Main product : PLC/DCS/TSI/ESD Module Quality supplier _ Amikon Amikon product is 100% original product made by the manufacturer.we distribute PLC, DCS, Fanuc, ABB and much more, we have over 20000 automation parts available. If you want to know more details, please call Jessica ( +86 18106909650 ) or E-mail Jessica ( sales3@amikon.cn ). Amikon provide the following services 1)Availability: In Stock or Ask us! 2)Guaranty: Original Factory Seal 3)Condition: Brand New and 100% Full New 4)Shipment: TNT/DHL/FEDEX/EMS/UPS... 5) , Guaranty: 1-Year Warranty 6)All the goods will be tested before shipment 7)Packing in professional anti-static bag [ Email : sales3@amikon.cn ] [ Skype : jessica01235483 Mobile : 86-18030235311 ] We have a professional team Sales department  24/7 hours service. Deal your request for any PLC, DCS products promptly, patiently and professionally. Engineering department  Ensure that there are no quality problems in the products. All products will be examed before shipment. Financial department Check payment and refund in time.  After-sales service department Full-time after-sales service team, under the sales department, the user can put the timely response to service requests. More advantageous models HONEYWELL 8C-PAINA1 51454470-175 HONEYWELL 8C-PCNT02 51454363-275 HONEYWELL 51304386-150 UCN Pulse Input IOP CC HONEYWELL 8C-TCNTA1 51307125-175 Series 8 Controller Honeywell 900C52-0244-00 Controller HONEYWELL 05704-A-0145 4 Channel Control Card HONEYWELL CC-PCNT01 51405046-175 HONEYWELL CC-PAOX01 51405039-275 Honeywell TC809B1008 JSM-TC809B1008C Monitor Module HONEYWELL CC-PAIX01 51405038-275 Analog Output Module Honeywell 51204160-125 MU-TDIY22 Digital Input Module Honeywell 51204162-125 MU-TD0Y22 Digital Output Module Honeywell 80363975-100 HW Digital Output Module HONEYWELL 8C-PDIL51 51454359-175 Your inquiry is welcome and we will serve you with all sincerity !! Jessica (Sales Manager) - Online Time 8:30AM-18:00PM Email : sales3@amikon.cn Mobile : 86-18030235311

Minimum Order: 1 bags

[IC]：AX5243 [Frequency]：400~525MHz < , br>[Power]：17dBm [Distance]：2000m [Size]：14*20mm [Weight]：1.35÷0.1g [Introduction]：E31-400M17S is a micro-size long range RF transceiving module with 400MHz central frequency;Based on AXSEM's AX5243 RF chip―a narrow-band multi-channel single-chip, the module has multiple modulation methods such as FSK / MSK / 4-FSK / GFSK. https://www.cdebyte.com/products/E31- , 400M17S

Minimum Order: 12 metric tons

Human-machine interface in English and Chinese versions, with optional operating languages. Portable operating keyboard, mobile phone, app, computer up-loading software, etc., with a variety of operating methods. Real-time monitoring of drive-related operating data to provide an effective basis for judgement. Integration of functions such as over-voltage, over-current, over- frequency, input/output phase loss, motor leakage, motor overload inverse time protection and wave-by-wave current limiting fast protection. Technical Parameters of 3 phase variable frequency drive Specification of 3 phase 380V(T4)/0.75kW~400kW Low Voltage Drive VDF Device Application Industries and Fields HIVERT Standard medium voltage VFD series is widely used in various fields in national economy, exported to Europe, Middle East, Southeast Asia etc.. Perfect solutions for soft start, speed adjusting, energy saving and intelligent control of medium voltage AC motors (including synchronous and asynchronous motors) could be supplied to customers. Typical application industries are: Now the 3 phase vfd price is not high, if you want to buy high quality 3 phase variable speed controller , please contact us. As a frequency inverter distributor, we will do our best to meet all customers’ needs.

Minimum Order: 1 bags

single phase to 3 phase drive

Minimum Order: 1 bags

Simple installation: without changing the original frequency electrical box, only the frequency converter needs to be added and the resistance box can complete the transformation work. Good anti-vibration performance: for the mechanical characteristics of the lift in operation, the whole machine is tested for anti-vibration by the vibration test bench at the factory. No need to set parameters: correctly connected to the motor line and control line, the machine can be turned on and work normally. Good comfort: no overshoot and weightlessness at start-up, smooth stopping, precise leveling and no bottoming out. Specification of 380V/0.4-800kW Construction All-in-one Machine VFD Application Industries and Fields HIVERT Standard medium voltage VFD series is widely used in various fields in national economy, exported to Europe, Middle East, Southeast Asia etc.. Perfect solutions for soft start, speed adjusting, energy saving and intelligent control of medium voltage AC motors (including synchronous and asynchronous motors) could be supplied to customers. Typical application industries are: If you want to know the vfd single line diagram, please visit our website. As one of variable frequency drive suppliers, we will offer types of variable frequency converter for sale, if you have needs, please leave us a message.

Minimum Order: 1 bags

Hiconics's CM Low Voltage Drive could realize the improvement of productivity and energy efficiency of your processes, reduce the maintenance costs. Our Low Voltage Drive are widely used in a variety of areas, such as mixers, conveyors, compressors, fans, pumps, centrifuges, as well as process control in industries including material handling, chemical, rubber and plastics, textile, and printing. The drives are easy to select, install, configure, and use, saving considerable time. Our drives are available directly from stock or can be built to order to meet more complex requirements. Our life cycle services will ensure your processes run exactly as you expect. Specification of 3 Phase 220v to 380v vfd VFD Application Industries and Fields HIVERT Standard medium voltage vfd electrical series is widely used in various fields in national economy, exported to Europe, Middle East, Southeast Asia etc.. Perfect solutions for soft start, speed adjusting, energy saving and intelligent control of medium voltage AC motors (including synchronous and asynchronous motors) could be supplied to customers. Typical application industries are: If you want to know more about 0.75 kw vfd and 1.5 kw spindle 110v, please contact us. Now the 1 kw vfd price and 1.5 kw vfd price are affordable, anything you need, please leave us a message. As a reliable variable frequency drive supplier, we have types of related products for sale, if you have needs, please contact us.

Minimum Order: 1 bags