Consumer Electronics

JC ear speaker receiver FPC flex cable with JCID receiver test board for iPhone X-13 Pro Max, solving the problems of no auto photosensitive and no true tone caused by damaged or missing original FPC flex. JCID X-13PM receiver detection adaptor works with JCID V1SE/V1S Pro programmer and JC earpiece distance photosensitive sensor cable fixes iPhone Face ID true tone problem. Option: 1. JC receiver FPC board for iPhone 8-13 Pro Max(works with JCID V1SE/V1S Pro only). 2. JC receiver FPC sensor flex cable for iPhone X/XS/XS MAX/XR/11/11PRO/11 Pro Max/12 Pro/12 Pro Max/12 mini/SE2/13/13 mini/13 Pro/13 Pro Max. Functions: 1. The receiver FPC controls True Tone and also acts in the Face ID process. 2. The receiver is often broken by a screen change and until now has not been replaceable. 3. The add-on board when connected to the V1SE/V1S PRO will enable the programming of a new receiver and fix missing True Tone and Face ID not available. (If your Face-ID error is move a little higher this is a different fault and different repair procedure). Feature: 1. Support to repair iPhone X-13 Pro Max face ID truetone problem caused by receiver FPC Failure, and not require original receiver FPC. 2. Receiver FPC detecting adaptor is for working on JC V1SE and V1S Pro, which support repair 8-13 Pro Max full series face lD true tone problem caused by receiver FPC failure, no require original receiver FPC. 3. JC ear speaker receiver FPC flex cable with JCID receiver test board for iPhone X-13 Pro Max, solving the problems of no auto photosensitive and no true tone caused by damaged or missing original FPC flex. 4. JCID X-13PM receiver detection adaptor works with JCID V1SE/V1S Pro programmer and JC earpiece distance photosensitive sensor cable fixes iPhone Face ID true tone problem.

Minimum Order: 1 bags

Qianli Universal Dot Matrix Repair Fixture for iphone X XS XSMAX 11 12Pro Max Face ID Repair Qianli Face ID Dot Projector Repair Holder. Product Features : Made of high quality durable material. Special dot projector fixture. Universal perfectly assemble flex of dot projector. Unique flex cables groove design. Anti-scalding. Unique light design, helps to position DOE Dot Projector / Ttrue tone laser reballing stencils. Used to easily repair the Face ID of iPhone. Specially designed for iPhone X / XS / XS Max / XR / 11 / 11 Pro / 11 Pro Max / 12 Mini / 12 / 12 Pro / 12 Pro Max.

Minimum Order: 1 bags

i2C i6S intelligent programmer for iPhone screen true tone/Face ID/battery/earpiece receiver flex cable/headphone lightning cable/vibrator/fingerprint repair, one-click jailbreak IOS device. Multi- functional i2C i6S programmer for iPhone 6-14 Pro Max repair. i2C i6s added dot matrix activation board for fixing iPhone Face ID issues without soldering. But i2C i6S new dot matrix activation board needs to be used with a 5V 2.4A charger and data cable, which is not included in the I6S package. You need to get them yourself. i2C i6S programmer read and write iPhone 12/12 Pro/12 Pro Max/12 mini/13/13mini original screen true tone data to fix iPhone 12/13 series screen true tone function. Note: If you want to use the battery, you can only use the original iPhone 7 battery. Function: 1. For iPhone 8-13 Pro Max Original screen True Tone repair. 2. For iPhone 8-13 Pro Max logical/base-band chip reads and writes. 3. For iPhone 6-14 Pro Max/iPad battery data read and write and repair. 4. For iPhone X-12 Pro Max handset row detection and repair. 5. For iPhone 6-12 Pro Max Query Bluetooth /WiFi code after jailbreak. 6. For iPhone 6-13 Pro Max One click query mobile phone crash analysis. 7. For iPhone 8-13 Pro Max Free computer without original screen repair True Tone. 8. For iPhone 7-13 Pro Max Touch/light sensitive/ vibration repair. 9. For iPhone X-14 Pro Max dot matrix data reading and burning. 10. One-click jailbreak on some IOS devices. 11. One-click detection of headset data cable. 12. More APP functions and small boards will be added indefinitely. I2C FA02 Face Integrated Chip Dot Matrix IC For iPhone X-12 Pro Max(5pcs/set). i2c dot matrix flex cable for iPhone X-12 Pro Max(10pcs/set). i2c battery flex cable for iPhone 11-13 Pro Max(6pcs/set) Features: 1. Support iPhone 7-12ProMax Screen True Tone repair: Exclusive support for 12 series original screen True Tone repair. 2. Support No original screen repair original color: Connect the phone to the device and trust the authorization The device automatically reads the phone's cover code, Click to restore the original color. 3.Support iPhone 5SE-13ProMax Battery repair: battery health modification, cycle clearing, battery data reading, modification, and burning. 4.Support iPhone X-12ProMax Face ID repair: Support dot matrix data detection, reading, burning: (1) Connected to the mobile phone can support face module data query, Cloud backup dot matrix data,never lost. (2) Buckle the lattice module It can detect,read and burn lattice data. (3) Button dot matrix module+ connect mobile phone Module data query,cloud backup dot matrix data,burning operation. 5.iOS Device one-click Jailbreak.Support free computer one key jailbreak, query Bluetooth /WiFi code, handset row detection. Support model:A8- A11/iOS12.0-14.8 6. Connect WiFi to upgrade the latest firmware. Enter the Settings, support language switch, WiFi/Bluetooth Settings, Sound Settings, software upgrades, view about the machine. Quad-core 64-bit high-performance processor, Strong scalability and faster response. Free WiFi connection upgrade the device software version. Built-in Bluetooth 4.2 channel and WiFi Speed 150Mbps integrated module. Description: Item Name: i6 intelligent programmer Model: i6S Product size: 130*76*22mm Packing size: 170*115*48mm Net weight: 94g Packed weight: 220g Material: (ABS+PC) Color: Deep Grey Main control chip: RK3308B Memory: 256M DDR3 Processor: Quad-core 64-bit ARM Cortex-A35, 1.3ghz Memory 1: 1GB eMMC NandFlash: 256MB Memory 2: SPL Flash 256MB Reserve Micro SD (TF) card slots WiFi/Bluetooth: WiFi speed 150Mbps, Bluetooth 4.2

Minimum Order: 1 bags

MECHANIC Dot Matrix repair tools set for iPhone X XS MAX 11 PRO MAX Face ID not working repair, suit for dot matrix for face ID soldering repair, solving broken dot projector of iPhone phones, no-record face, the perfect repair tools set for iPhone XS Face ID repair special soldering paste Mechanic Dot Matrix Repair Tools Set For iPhone X XS XS MAX 11 PRO MAX 11 PRO 11 Face ID Repair Product Features : Pen-type pressing, sensitive contact switch, small and flexible, comfortable to hold. Universal high temperature resistant synthetic stone microscope base, pressured of sinking clips design, Precise positioning with clamping. Special soldering paste, A touch instant soldering, plump solder point, no reside, fast curing. Fast curing glue, help repair Dot projector for Face ID efficiently It is specially used for the soldering and reflow of the Dot projector for Face ID, effectively preventing the oxidation process and improving the mainboard's welding quality of the Dot projector for Face ID Grinding pen, suitable for repairing IC chips, grinding, cutting motherboard, bracket, removing screws, etc. without damaging the surface of components. Application: Suit for dot projector for phone face ID soldering. Solving broken dot projector, no-record face, perfect repair Face ID. Compatible models : iPhone X / XS / XS MAX / 11 / 11 PRO /11 PRO MAX Package includes : 1pcs x Magnetic Fixture FID 1pcs x Face ID stencil iTin 48 1pcs x IC Polish Tool IRX 1pcs x 3ML Dot Projector Special Soldering Paste DT1 1pcs x 10ML Dot Projector Special Glue OK7 1pcs x 10cc Dot Projector Special Flux DW136

Minimum Order: 1 bags

New JC V1SE Dot projector board supports iPhone X-14 Pro Max. New JCID V1SE Dot matrix board for iPhone X-14 PRO MAX Face ID repair. JC V1SE Dot projector detection board for repairing iPhone Face ID move higher or lower problem. JC V1S Dot projector Face ID repair board is used for detecting the iPhone dot projector flex cable, read and write the data for new dot matrix flex cable. Option: 1. JC Face ID dot projector board for iPhone X-14 Pro MAX(New version), works with new JCID non-removal FPC Face ID repair flex cable(without soldering). 2. JC Face ID dot projector board for iPhone X-13 Pro MAX(New version), works with new JCID Face ID repair flex cable(old version). Features: 1. JC V1SE Dot Projector Detection Board for iPhone X/XS/XS MAX/XR/11/11 PRO/ 11 PRO MAX/12/12 PRO/12 PRO MAX/12 MINI/13/13 Pro/13 Pro Max/13 mini/14/14 Plus/14 Pro/14 Pro Max Face ID repair. 2. Replace the original dot matrix cable with new JC dot matrix cable. 3. Install and handle well the new replacement dot matrix cable. 4. Replace the dot matrix cable. 5. No disassembly of the original chip, encrypted data permanent storage, recover any time need. 7. Connecting to phone for breakdown code analysis. Read screen code to realize truetone repair without original screen. [ Optional boards for V1S ] : Battery detection board : Automatically read battery information, distinguish original or non-original, support to edit battery information Fingerprint board : Automatically read the phone's fingerprint serial number, support writing the fingerprint serial number into JC home button Dot projector detection board ( to launch soon ): Dot projector data read and write Features: Support to detect whether the face matrix is normal, fusing, NTC disconnection, IC disconnection, short circuit, etc. Dismantling, compatible with all brands dot projector chips / cables. Unique design, read phone directly without dismantling, compatible with all brands dot projector chips/cables. Supported Models: iPhone X-14 Pro Max / iPad A12X. Support dot projector data read and write. Collocating with JC dot projector flex cables to perfectly repair face ID "Move higher, move lower" problem for full series models. Perfect coordination of the 3 buttons to fulfill easy detection, read and write. PC free to work separately for read and write, also support data backup to PC by work on JC repair assistant. For V1S regular users, just connect to PC and update the software on JC Repair Assistant, then could obtain the dot projector repair function.

Minimum Order: 1 bags

JCID Face integrated chip universal dot projector IC for iPhone X-12 Pro Max iPad Pro 3/4 Face ID repair. New JCID integrated chip dot matrix IC with pin and tin balls, no need to convert FPC capacitor and MOS tube, simple operation. JC dot matrix lattice chip Face ID repair integrated IC for iPhone X/XS/XS MAX/XR/11/11Pro/11 Pro Max/12/12 mini/12 Pro/12 Pro Max, iPad Pro 3/4. JCID Romeo2 Self-Designed Face ID Chip-2ndGen Support For iPhone X-12PM/iPad Pro3/4/5 series,Smaller, thinner and more stable,No need for a shim, New upgrade with chip,install with ease,Romeo2 Face ID Chip-2ndGen 0.05mm lower than the magnet ring,enough space for chip locating,install easily! Features: 1. 1:1 solder pad, no need to convert FPC. 2. No need to short circuit the MOS tube manually. 3. No need to install capacitors. 4. No need to grind, traceless repair. 5. Original planting balls, installed directly. 6. 1 pin clear mark, Easy to identify. 7. Simple operation, one step in place. 8. One dot projector chip for the iPhone X-12 Pro Max, iPad Pro 3/4/5.

Minimum Order: 1 bags

Upgrade i2C V8i 3rd Generation Face ID repair programmer with Dot Matrix flex cable for iPhone X -12 Pro Max/iPad34 Face ID repair. iPhone Face ID Read Write programmer with Dot flex cable. i2C Face ID Dot Matrix Cable Dot Projector Flex Cable For iPhone X XS XR XSMAX 11Pro Max 12 Pro Max Face ID repair, solve iPhone Face ID moving higher lower problem. Note: i2C V8i 3rd Generation Dot Matrix Flex Cable is only used with i2C Face ID V8i programmer. i2C V8i 3rd Generation Dot Matrix Cable For iPhone Face ID Fix iPhone X/XR/XS/XSMAX/11/12promax Dot Matrix Face ID Repair Flex Cable. [ Optional Flex Cable ] : Option 1: Flex cable for iPhone X Option 2: Flex cable for iPhone XR Option 3: Flex cable for iPhone XS Option 4: Flex cable for iPhone XS Max Option 5: Flex cable for iPhone 11 Option 6: Flex cable for iPhone 11 Pro Option 7: Flex cable for iPhone 11 Pro Max Option 8: Flex cable for iPhone 12/12 Pro Option 9: Flex cable for iPhone 12 Pro Max Option 10: Flex cable for iPhone 12 mini Option 11: Flex cable for iPad Pro 3/4 Option 12: i2C IFace V8i programmer Iface V8i Programmer Fix iphone Face ID Not working on X-12 pro max, Face ID Repair Tool - Iface Pro V8i Programmer, don't need disassemble & Reballing the encrypted chip, just replace the dot matrix cable, repair iPhone Face ID issues no working. Iface V8i Programmer for iphone Dot Matrix Read Write Repair Tool Support Read & Write: Must Need Dot Matrix V8i Programmer Flex Cable 1: Offline Data reading 2: Burn Free 3: Chinese / English 4: Perfect repair 5: No Risk free chip repair 6: Low power & No leakage 7: adapter IOS14.* Option 1: Iface Pro V8i Programmer for ipnone Dot Matrix Face ID Repair Option 2: Different model iphone Dot Matrix Flex for Face ID- V8i Programmer, Support from iphone X to 12 pro max Face ID Maintenance Combo Support Fuse detecton, data reading, chip buring, offline read-write, free forever. Notice: 1: After order, contact us for confirmation; 2: The 3rd Generation flex cable can only be used with the IFace V8i programmer; The previous i2C Face ID dot matrix cable can also be used with the IFace V8i programmer 3: The flex cable can not be used separately; 4: If there is no programmer, the flex cable can not be used.

Minimum Order: 1 bags

i2C MC12 SK-BOX Dot Matrix Disassembly-free programmer with non-removal no- soldering Face ID repair flex cable for iPhone X-14 Pro Max. New i2C Face ID repair soldering-free flex cable for iPhone X-12 Pro Max. Features: 1. New i2C dot matrix repair cable repair iPhone X-12 Pro Max Face ID without soldering. 2. i2C MC12 Dot matrix activator programmer for reading, writing and activating iPhone X-12 Pro Max dot matrix cable without disassembling, it doesn't support luminescence detection. 3. i2c MC12 dot matrix free splitactivating device with one-button activation, network update, low-voltage reading, data read and write, online operation functions, ect. 4. After activating the original iPhone dot matrix flex cable by I2C MC12 box, you can use i2C I6/I6S/Face-14/V8i programmer to detect read and write data. Option: 1. i2C MC12 SK-BOX programmer. 2. i2C dot matrix Face ID no soldering repair flex cable for iPhone XR/X/XS/XS MAX/11/11 PRO/11 PRO MAX/12/12 PRO/12 MINI/12 Pro Max.

Minimum Order: 1 bags

New JCID Non-removal Face ID Repair FPC flex cable Fixes iPhone X-12 PRO MAX Face ID issues without soldering. JCID solder-free dot matrix flex cable used with JCID V1SE/V1S Pro for iPhone Face ID repair. JCID iPhone X-14 Pro Max Dot Matrix Face ID activation read write board. Note(important): 1. New JCID Face ID non-removal FPC flex cable needs to use the new JCID iPhone X-14 Pro Max dot matrix face ID activation read write board. 2. New JCID iPhone X-14 Pro Max Dot Matrix board only supports JC V1SE/JCID V1S Pro programmer. Features: 1. Repair iPhone X-12 Pro Max Face ID without soldering and alignment. 2. For iPhone X-12 Pro MAX Face ID repair, no dismantling of optical components, no alignment, no welding. 3. New JCID dot projector Face ID repair flex cables for iPhone X/XS/XS MAX/XR/11/11 Pro/11 Pro Max/12/12 Pro/12 mini/12 Pro Max. 4. JCID newly Face ID repair FPC flex cables can be used with JCID V1SE/V1S PRO. 5. JCID new iPhone X-14 Pro Max Dot Matrix Face ID activation read write board. Instructions: 1. Read the original iPhone Face ID data with JCID V1S/V1SE/V1S Pro and write it into the non-removal Face ID repair flex cable. 2. Activate the original Face ID module with V1SE/V1S PRO. 3. Connect the non-removal Face ID repair flex cable and install.

Minimum Order: 1 bags

QIANLI MEGA-IDEA Clone DZ03 Face ID Dot Matrix Programmer No dismantling repair instrument for iPhone X to 14 Pro Max face ID repair. Features: Clone-DZ03 programmer, repair face ID as easily as repair accessories, even a piece of cake for new beginners. Simple, as long as you know how to disassemble your phone. No difficulty, beginners can also repair FACE ID. Easy, repair the Id FACE as easily as changing accessories. Support a variety of flex cables with unlimited expansion. Support iPhone X/11/12 series flex cables, and other models will keep updating. Package includes: 1 x DZ03 Standard set: Host+Dot Matrix Module+battery Test Module 1 x Clone-DZ03 Host:Host+Dot Matrix Module 1 x Dot Matrix Flex Cable(Optional) Programmer QIANLI MEGA-IDEA Clone DZ03 Dot Matrix Repair Instrument Note: The flat cable supports IP X series, 11 series, 12 series, and other models are continuously updated. The flat cable is generally MEGA-IDEA, QIANLI device, QIANLI device (iCopy, Apollo, iD Face, etc.) Usage: 1. Download MEGA-IDEA computer software. 2. Plug the MEGA-IDEA Clone-DZ03 programming host into the dot-matrix activation board, connect the computer software "Megalda Assistant", and connect the matching power adapter to the DC interface on the activation board. 3. Connect the mobile phone to the computer, button the dot matrix module on the activation board and click to activate (at the same time, the dot matrix data will be backed up through the unique code of the mobile phone). 4. Remove the dot matrix module, buckle the corresponding type of flat cable, and write it into the bottom layer of flat cable data. 5. The flat cable is connected with the dot matrix module, and then connected to the programmer for testing. The data display is normal, and the face is successfully repaired after being loaded into the mobile phone.

Minimum Order: 1 bags

AY A108 Programmer BOX For iPhone 8-14 Pro Max Battery/Screen true tone/Face ID Repair. A108 programmer repair iPhone X-12 Pro Max Face ID without soldering. A108 BOX Restore programmer allows you to read and write information about Apple iPhone's battery, Face ID, and other data. The battery detection board and the dot projector detection board are compatible with our phone repair programmer. Note: A108 Programmer for iPhone X-12 Pro Max Face ID reapir without soldering flex cables, just replace the dot matrix flex cable directly. A108 BOX Multifunctional Restore Programmer For iPhone Compatible With Battery Repair/Face ID Fix Dot Projector Detection. Features: 1.Support battery data read and write, and Face ID fix. 2.The device function can be expanded via the online free firmware. 3.Repair the underlying data, accessories information won't be distorted. 4.Data cloud backup to prevent data loss. 5.Easy to use, multi-language support. Package Included: 1* A108 BOX Programmer 1* Manual 1* Battery Detection Module (Optional) 1* Dot Projector Detection Module (Optional) 6* Battery Tag-on Flex Cable (Optional) 7* Dot Projector Flex Cable (Optional) A108 5 in 1 package includes: 1X A108 Box Programmer 1X Handbook 1X Battery Detection Module 1X spot projector detection module 1X 7-11 series trueton screen repair module 1X Trueton 12-13 Series Screen Repair Module A108 full set included: 1X A108 Box Programmer 1X Manual 1X Battery detection module 1X spot projector detection module 1X 7-11 series trueton screen repair module 1X Trueton 12-13 Series Screen Repair Module 1X Battery Label Flex Cable 1X Dot Projector Flex Cable

Minimum Order: 1 bags

TBK-D201 Multifunctional Constant Temperature Soldering Iron Welder Station With smoke absorber fume extractor for mobile phone welding repair. Soldering iron with smoke purifier exhaust fan 2 in 1 machine for electronic mobile phone PCB chip welding repair. Features: 1. Activated carbon filtration, intelligent work dormant, work lighting. 2. Universal smoking pipe rotates 360 degrees at will. 3. Temperature control range: 0-450 celsius degree. 4. Microcomputer display， data is more intuitive. 5. Equipped with T12 lead-free soldering iron head, lead-free heating core, fast temperature rise, easy tinning and long service life. 6. Equipped with activated carbon smoke filter, work without pollution, protect health. 7. Heat insulating silica gel, which is anti scalding and anti slip. 8. With three hole lighting for clearer viewing. MACHINE Name: smoking thermostatic soldering iron Model: D201 Voltage: AC110-240V Power: 150W Temperature control range: 0-450℃ Control mode: knob adjustment Product size: 15*24*8.5cm Net weight: 1.4kg Product packaging: 32*37"13cm Gross weight: 3kg SOLDERLNG BIT Name: T12 soldering iron head Power: 72W Standard welding nozzle: I nozzle Heating core soldering iron head: Integrated Handle cable material: silicone Handlewirelength: 1.2cm

Minimum Order: 1 bags

What Are The Characteristics Of CNC Machine? Process concentration, automation, high flexibility, and strong capabilities are the characteristics of CNC machining. The process rules of prototype cnc machining and traditional machine tool machining are generally consistent, but there have also been significant changes. So what are the characteristics of shenzhen cnc machining? 1. Process concentration CNC machine tools generally have tool holders and tool magazines that can automatically change tools. The tool changing process is automatically controlled by the program, so the process is relatively concentrated. Process concentration brings huge economic benefits: 1. Reduce the floor space of the machine tool and save the workshop. 2. Reduce or no intermediate links (such as intermediate testing of semi- finished products, temporary storage and handling, etc.), which saves time and manpower. 2. Automation During CNC machining, there is no need to manually control the tool, and the degree of automation is high. The benefits are obvious. 1. The requirements for operators are reduced: a senior worker of an ordinary machine tool can not be trained in a short time, while a CNC worker who does not need programming has a very short training time (for example, a CNC lathe worker needs a week, and he can also write simple processing program). Moreover, the parts processed by CNC workers on CNC machine tools have higher precision and save time than those processed by ordinary workers on traditional machine tools. 2. Reduce the labor intensity of workers: CNC workers are excluded from the processing process most of the time during the processing process, which is very labor-saving. 3. Stable product quality: The processing automation of CNC machine tools eliminates human errors such as fatigue, carelessness, and estimation of workers on ordinary machine tools, and improves product consistency. 4. High processing efficiency: The automatic tool change of CNC machine tools makes the processing process compact and improves labor productivity. 3. High flexibility Traditional general-purpose machine tools have good flexibility, but low efficiency; and traditional special machines, although high in efficiency, have poor adaptability to parts, high rigidity and poor flexibility, making it difficult to adapt to the fierce competition in the market economy. Products are frequently modified. As long as the program is changed, new parts can be processed on the CNC machine tool materials, and the operation can be automated, with good flexibility and high efficiency, so the CNC machine tool can well adapt to market competition. 4. Strong ability Machine tools can accurately machine various contours, and some contours cannot be machined on ordinary machine tools. CNC machine tools are especially suitable for the following occasions: 1. Parts that are not allowed to be scrapped. 2. Development of new products. 3. Processing of urgently needed parts. Compared with traditional machine tool processing, CNC machining parts has changed a lot, and the efficiency has also been greatly improved, which is also the advantage brought by the continuous development of science and technology. If you want to know more details of features of cnc machine, please contact us.

Minimum Order: 1 bags

Physical vapour deposition, just PVD coating, as we usually call it, refers to vacuum ion plating and vacuum sputter plating; Generally speaking, ncvm coating refers to vacuum evaporation coating. The basic principle of PVD surface treatment is to vaporize the coating material under vacuum, and then deposit it evenly on the surface of the target part through electrons. The advantages of PVD are: good adhesion of coating (good mechanical properties), strong winding ability (adjustable target position and electroplating path), good coating quality (dense, uniform, high strength and long service life), simplified cleaning process (with cleaning function), and a wide range of plating materials (metal and non-metal can be plated). PVD Coating System custom pvd coatingpvd coating systempvd coating technology Does PVD Coating Wear Off? The wear resistance of PVD coating system is different with different electroplating materials. For example, the CRN coating on the surface of bearings and cutting tools has strong wear resistance and is not easy to wear off. Is PVD Better Than Stainless Steel? PVD Physical Vapour Deposition is a surface treatment process. PVD surface treatment aims to improve or improve the performance and appearance of metal surfaces, and cannot be compared with the performance of cheap CNC material. Types Of PVD Coating There are different types of PVD coatings that can be offered depending on the application requirements. Titanium Nitride (TiN), Chromium Nitride (CrN), Titanium Aluminum Nitride (TiAlN), Titanium Boron Nitride (TiBN) are some examples of PVD coatings. PVD Coating Advantages Physical vapour deposition coatings offer the following benefits: PVD surface treatment has high hardness (2400-4000 HV) (~ 80-90 HRc). PVD physical vapour deposition is high abrasion resistance. PVD metal coating is low friction coefficient (high surface lubricity) Reduced tool heating due to low thermal conductivity of PVD physical vapor deposition. Physical vapor deposition coating is well resistance to chemical environments PVD metal finish can increase surface quality of the machined parts Preventing the processed parts from adhering to the tool-mold surface No change in dimensions due to PVD coating thickness at micron level Decrease in tool cost per piece due to increased tool physical life Decreasing in workbench downtime periods since tool change frequency are decreased PVD surface treatment can obtain homogeneous coating thickness in each area PVD Coating Technology PVD coatings can be applied on components using different PVD technologies such as arc evaporation, magnetron sputtering to name a few. HEF specializes in plasma enhanced magnetron sputtering, CAM (coating assisted by microwaves) and modified arc evaporation coating technologies. PVD coating technology is the most important one of the methods in which hard ceramic coatings can be successfully applied on mold and tool surfaces. This PVD technology is based on the principle of ionic accumulation of materials under vacuum by being evaporated and/or sputtered on the surface, to which the coating is to be applied. PVD Coating Applications PVD coating can be found in a broad range of products. For example, PVD surface treatment is frequently used in architecture. There is a wide range of PVD coating applications, which is why it is commonly used in high-tech industries. Some of the industries and applications in which we have applied PVD physical vapor deposition coating include coating on composites for aerospace, titanium on medical implants and surgical tools, gold thin film to replace plating for electronics, non-metal, chemical resistant oxides for semiconductor parts and hard ceramic coatings for industrial tools.

Minimum Order: 1 bags