Consumer Electronics

Features With standard 2U design, it can be installed on the racks of the cabinet, which enables unify management and maintenance. With a modular power supply design, we can replace the damaged power supply separately due to the redundant power supply without affecting the system. All stand-alone media converters or media converter PCB can work alone without affecting each other’s performance. All stand-alone media converters or media converter PCB are hot-pluggable. Individual LED indicator for each power module, stand-alone media converter and media converter PCB. Introduction: The HS fiber media converter chassis is with standard size of 19 inch. In order to fulfill the diversified market needs, HS group developed media converter chassis with multiple designs from color to different slots combination. The 2 most commonly used types are 14 slots and 16 slots. 14 slot type is for the stand-alone media converters and 16 slot type is for media converter PCB cards. Both are designed with dual power supply. We also developed diversified color designs to help promote your brand among similar products.   The HS fiber media converter chassis is highly integrated photoelectric converter center that centralizes up to 16 photoelectric converter cards in a single rack for unified power supply. It not only reduces the cable, simplifies the structure, but also facilitates management and maintenance. Rack support for hot-swap optional single or dual power supply. With dual power supplies, in order to reduce the load on each power supply, both power supplies will be supplied at the same time to extend the life of power supplies. In case one of the power supply fails, the other power supply can be supplied independently so that the converter will still work normally. When the power supplies need to be maintananced, there is no need to pull out the fiber optic converter or remove the rack from the cabinet. We can just simply pull the faulty power supply from the back of the rack for repair or replacement, which makes the maintenance extremely convenient and fast. In this way, it can provide high reliability, high capacity, high integration, economical. All of those significant features lead to stable operation, solid power supply capacity, easy operation, easy maintainance and practical fiber optic network center solution for fiber-optic Ethernet network system.  Specifications: Product Model Product Description HS-4F2E-A/B20 10/100BASE-TX to 100BASE-FX SC Fiber Switch SMF,20KM HS-4F62E-S20 10/100BASE-TX to 100BASE-FX SC Fiber Switch DF,20KM Ordering Information: Product Model Product Description HS-2U-14slot 14slot, 2U 19”, Dual power supply HS-2U-16slot 16slot, 2U 19”, Dual power supply Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which is an original manufacturer of networking and fiber products. We provide fiber optic media converter chassis, fiber converter chassis, poe extension, Ethernet Switch, POE Switch, Ethernet Extender and etc. Want to know more? Please contact us.

Minimum Order: 500

Features Support the switch between 10/100Base-TX and 1000Base-SX/LX 2*1.25Gbps full-duplex fiber ports and 4*100M Ethernet ports with auto- negotiation function Support 100M speed rate,MDI/MDIX and half/full-duplex with auto-negotiation function Each port has the complete LED Indicator light Support single mode single fiber,single mode dual fiber,multi-mode dual fiber and SFP slot Support IEEE802.1d Spanning Tree Support high performance QoS function on each port Support broadcast storm control Support 48-56V voltage input Support 8K MAC table Support IEEE802.3x flow control and back pressure control Require no configuration and will instantly operate as soon as you power it up Small volume,light weight Low power consumption chip with heat sink built in to ensure longtime efficient operation Support POE power up to 30W for each port,support IEEE802.3af,IEEE802.3at The HS 2G4FEP is 1000M POE switch with 1 1000M fiber port and 4 10/100Mbps RJ45 POE ports. We also offer all ports gigabit for higher speed demand networks. It’s suitable for the network which requires cascading switches as well as power supply for 1-4 ending devices. POE switches offers power supply through Ethernet cables on the basis of normal non-POE functions. There are 2 kinds of POE switches, standard POE and non- standard POE. Non-standard POE switches get outdated with the development of technology. There is big risk of burning as it gives power as soon as ending equipment is connected to it. For standard POE, there is automatic detection before the power supply. It will detect if the ending equipment can bear the power supply or not; it can also detect if power supply is really needed. In this way, there will not risk of buring from compulsive powering. Most of the current IP cemeras support to be powered with POE switches. So there is no need to arrange extra wiring as normal non-POE switches and it’s more reliable for the IP cameras as there is smart detection before power supply. Without the extra labor work and cost on the cabling, POE switches also help to save lots of money and time. If any changes need to be made for the locations of the IP cameras, it’s also easier for maintance and upgrade as there is no need to worry about the power socket. As a 48V standard POE switch, HS 2G4FEP is a device which can help you to improve your current network greatly. If you need to transmit network over long distance and there is need for power supply on 1-4 ending devices, it would be the perfect solution for you. 2 fiber and 4/8 POE port models are best selling models for small size LAN networks. Welcome to test! The HS-2G4FEP is a POE switch designed for network monitoring. It has four 10/100Mbps Ethernet ports and two 1.25Gbps fiber ports. It is designed with imported Marvell chip to achieve lower power consumption and high stability. It extends the transmission distance of a network from 100m to120km via copper cables. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance. Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which is an original manufacturer of networking and fiber products. We provide poe switch 1000 mbps, switch 1000mbps, 6 port poe switch, gigabit media converter, POE Switch, Ethernet Extender and etc. Want to know more? Please contact us.

Minimum Order: 500

Features 5*1000M Ethernet ports with auto-negotiation function Support 1000M speed rate, MDI/MDIX and half/full-duplex with auto-negotiation function Each port has the complete LED Indicator light Support single mode single fiber, single mode dual fiber, multi-mode dual fiber and SFP slot Support IEEE802.1d Spanning Tree Each port supports wire-speed switching, 64~1518 frame length can reach the wire speed Support 9216bytes Jumbo packet Internal 4K MAC Address Entities Support high performance QoS function on each port Support multicast to avoid network congestion Support 5-16V voltage input Support 4KV port lightning protection VLAN DIP effectively solve the network congestion and lagging caused by broadcast storm. Require no configuration and will instantly operate as soon as you power it up Use low-power consumption chips, only 2.0W in full load conditions The HS 5GE is a 10/100/1000Mbps Ethernet Switch hub for FTTD desktop installation. HS 5GE is with 5 10/100/1000Mbps RJ45 ports; as a switching hub, it shares 1 Ethernet cable with other 4 terminal devices such as computer, router or switch, etc.. As the main connecting devices in a LAN network, Etherent switches are one of the mostly applied network devices. If there are over loaded users, busy APPs and all kinds of servers in your LAN networks, and the network infustructure is never adjusted with the increase of above changes then the performance of the network transmission would be severely affected. The best solution would be the apply of a gigabit desktop Ethernet switch. The function of switches is totally different under different network environments. It’s also different story between adding new switches under current network environment and replacing current switches with more ports. The point of using switches is to reduce and detect the data flows in the network, if one specific switch has to forward all the packets received under poor deployment, then the other switches will not be able to display their best performance and the transmission speed will also be affected. Except the position of switches, it will also lead to problems if we deploy switches at the locations with small data load and few packets. Under such circumstances, a switch hub would be a perfect solution. When the current network is not very crowded, a switch HUB would be perfect to solve the current network issues. HS 5GE is with super small size and nicely designed blue metal case. It can fit in any spaces as it’s super compact. Without extra wiring, it can help to improve your cabinet and desk back to be neat and tidy enough. And as a gigabit switch HUB, it maintains the fast Gigabit transmission speed without any compromise. If you need a small switch HUB and need to connect with less than 5 devices, it would be the perfect choice for you. The HS-5GE series unmanaged switches are full gigabit switches which are specially designed for high forwarding network environment such as school, family, SMEs and mini monitoring. It has 5 10/100/1000Mbps adaptive Ethernet ports. All ports support wire-speed forwarding and the data rate is up to 1000Mbps. There is lightning protection to ensure smooth and stable operation. Auto MDI/MDIX is also available. No configuration is required, it will instantly operate as soon as you power it up. Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which is an original manufacturer of networking and fiber products. We provide poe extender repeater, poe ethernet repeater, ethernet switch 1000 mbps, fast fiber converter, POE Switch, Ethernet Extender and etc. Want to know more? Please contact us.

Minimum Order: 500

Features POE Extender-The Smart Solution for Covering Distances As we all know, Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When a longer transmission distance is needed, we normally use fiber cables to extend the transmission distance. However, sometimes we do not have the budget or space for fiber wiring. To overcome the Ethernet cable distance limit, we can simply apply with a POE extender. It can help extend a certain distance with CAT-5e or CAT-6 cables. After using POE extenders, the connection distance in total for the Ethernet cables can be as long as 400 meters. Besides, it's very easy to use and also with competitive prices. For applications not suitable or affordable on fiber solutions, it can help solve the problem easily and effectively. POE Extender has the following main features: 1.Extends a POE connection beyond the limit of 100 meters 2. It's IEEE802.3af and 802.3at compliance 3.Super easy for installation; without any additional power supply 4.With wide compatibility to most POE products in the market. 5.Mainly for indoor use. How are the HS POE Ethernet Extender Deployed? Switch > PoE transmitting device > PoE receiving device > IP powered device Detailed steps are as follow: 1. Connect the switch and POE transmitting device through fiber cables 2. Connect the "To RX" port on the POE extender to the "To TX" port in the PoE receiving device through RJ45 cable 3. Connect the "To IP device" port on the POE extenders to the ending IP device that needs to be powered. Why HS Power Over Ethernet Extender? HS PoE Extender delivers 100 Mbps, full-duplex data rate. Our POE Extender can be installed easily into an existing installation as it's compatible with both POE and non-POE switches in the market. It’s designed to extend POE over the standard of 100 meters. For many building applications that require more than 100 meters Ethernet distance, HS POE extender can play a very important role to extend the limited distance. HS POE extender is an easy and cheap solution for many application scenarios as to power IP cameras, access card readers by providing power plus data to up to 4 IP devices under 1 Ethernet cable. Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which is an original manufacturer of networking and fiber products. We provide poe extender repeater, poe ethernet repeater, poe extension, Ethernet Switch, POE Switch, Ethernet Extender and etc. Want to know more? Please contact us.

Minimum Order: 500

ntroduction Our products are tracking device based on the GSM / GPRS / (WCDMA) network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking. They can track and monitor remote target by SMS or internet. This 3G model is designed for vehicles. And it reports high risk status according to door lock, engine and shock, after you received the message, you can cut the fuel and electriciry off through SMS or Internet. With 303G you can operate ARM/DISARM through a remote controller. Product advantages -External Antenna -Change Password -Authorized number -Locating -Auto track continuously -Automatic update positions of vehicle turns -GPS drift suppression -street address by SMS -Location based service (LBS) -Data Load -Data logging -Forward the telecom operator's message -Fuel sensor -Alarm Function   Low battery alarm   GPS blind Spot alert   SOS -Geo-fence   Multi-area management   Movement alarm   Over speed alarm -Check the Vehicle State -Reset Hardware -Remote controller -Arm   ACC alarm   door alarm   shock alarm -Sleep Mode   Sleep Mode   No sleep mode -Check IMEI -Set up Terminal (local) Time -TCP / UDP Switch -Configure parameters by USB -GPRS setting   Setting up APN   GPRS User ID and password Setup   IP and port setup -Modes Switch between "SMS" and "GPRS"

Minimum Order: 100

Electronic communication devices encompass an impressive array of goods that make our daily life easier and more convenient. Many of these products need to be with great performance, good durability, lightweight. As a extruded aluminum heatsink manufacturer, LC Rapid provides rapid prototyping and rapid tooling services to leading electronic communication companies. We produce components, extruded heat sink profilesfrom an array of materials for all phases of the product life cycle which ensure clients are competitive in such rapidly changing market. We have injection molding sensors, cnc heatsink, t slot l bracket and round heat sink extrusion products, etc.. for sale. We mainly specialize in low volume manufacturing. What Materials are Suitable in Electronic Communication Industry? ABS ABS is widely used in electronic components mostly for it’s reliability, low cost, and good performance. It has been seen in components such as electronic enclosures and wearable devices. Aluminum Aluminum is often used for its excellent malleability((the ability to be shaped and processed), high strength, and low weight. Aluminum goes into components such as enclosures, chassis, brackets by using sheet metal fabrication. Elastomer Elastomer’s main benefit is that is has good impact resistance and flexibility, making it perfect for applications like buttons and handles. Polycarbonate Polycarbonate is one of the most popular thermoplastics because of its extremely good impact resistance, great toughness, dimensional stability and transparency. You will find PC for optically clear products. Precision Electronic Communication Applications Electronic Cabinets and Enclosures Fixtures Sensors Heat Sinks Handles Buttons Switches Connect , ors Brackets Chassis Transformers and Audio Equipment. Rack Mount Assemblies Fan Housings Capabilities for the Electronic Communication Industry CNC Machining Injection Molding 3D Printing Sheet Metal Fabrication Vacuum Casting Aluminum Extrusion Carbon Fibre Pressure Die Casting Post Processing Used in Electronic Communication Industry Anodizing Hard Anodizing Passivation Electroplating Powd , er Coating Painting Pad Printing Vapor Polishing Insert Installation Heat Treatment

HDMI Splitter 2 in 1 out or 1 in 2 out 1.No additional power required; 2.3840*2160@60HZ；support HDCP2.2; 3.Source 1 and source 2 free switching output, one monitor input; 4.One source output,monitor 1 and monitor 2 free switching input; 5.One button control and switch, avoiding pull out and plug frequently. 6.Audio and video transfer simultaneous. 7.LED indicator, help to figure out the connector’s working status; 8.Power /Switch button; Application: Set top box, computer, laptop, network video box etc. Devices with HDMI. Dimension: 63.5mm x 53mm x 14.5mm

Minimum Order: 500

DisplayPort Male to HDMI Female Converters 4K Aluminum APPEARANCE: black wire, aluminum space grey case and gold plated DisplayPort connector Length: 0.23m DISPLAY RESOLUTION: 4K and 1080P optional. COMPACT DESIGN - The compact-designed portable DisplayPort to HDMI adapter connects a computer, desktop, laptop, or other devices with DisplayPort port to a monitor, projector, HDTV, or other devices with HDMI port; Tuck this lightweight gadget into your bag or pocket to do a business presentation with your laptop and projector, or extend your desktop screen to a monitor or TV; A HDMI cable is required. SUPERIOR STABILITY - Built-in advanced IC chip converts DisplayPort signal to HDMI signal; It is NOT a bi-directional converter and cannot transmit signals from HDMI to DisplayPort. INCREDIBLE PERFORMANCE - The DisplayPort male to HDMI female converter supports resolutions up to 3840*2160@30Hz, 1920x1080@60Hz (1080p Full HD) including 720p, 1600x1200, 1280x1024 for high definition monitors or projectors, supports flawless audio pass-thru for uncompressed digital 7.1, 5.1 or 2 channels; Gold plated DisplayPort connector resists corrosion and abrasion and improve the signal transmission performance; Molded strain relief increases cable durability LATCHES DESIGN: DisplayPort connector with latches provides a secure connection, the latches will improve the connection stability in usage. When plug out, please press the realse button, and easy to pull out.

Minimum Order: 500

BESTTOP air-cooled glass door commercial reach in fridge, clearly displayed, long-term preservation, is the best choice for the preservation of fruits and vegetables in the kitchen. Different sizes and volumes are available. There are models of single glass door commercial refrigerator, double glass door commercial refrigerator and 3 glass door commercial refrigerator. The application of refrigeration in food preservation: perfect temperature consistency with its innovative airflow design that encircles the food and ensures its proper conservation. STANDARD FEATURES: BESTTOP glass door reach in cooler with high functionality for a professional kitchen. Plastic-coated wire grids allow the storage of different packaging types and have a maximum loading capacity of up to 40kg. Self-closing Glass door. With electric heating wire, anti-fog. Firm stainless steel handle for easy door opening. Stable operation at an ambient temperature of 43 degrees Celsius. Climate Class 5. Temperature range of 2˚C to 8˚C on refrigerators and -12˚C to -18˚C on freezers. Precision digital thermostat. OPTIONAL FEATURES: Adjustable legs. Caster Wheels. Additional shelves. Glass Door Reach In Refrigerator Specifications： Model Cooling type Classification Cabinet Dimensions Net Volume   (liters) Refrigerant Temperature（℃） Power(W) CRT24-1G Ventilated Refrigerator 615*760*2005 470 R134a 2~+8 375 CFT24-1G Ventilated Freezer 615*760*2005 470 R404a -18~-12 650 CRT48-2G Ventilated Refrigerator 1230*760*2005 1010 R134a 2~+8 560 CFT48-2G Ventilated Freezer 1230*760*2005 1010 R404a -18~-12 960 CRT72-3G Ventilated Refrigerator 1845*760*2005 1590 R134a 2~+8 825 CFT72-3G Ventilated Freezer 1845*760*2005 1590 R404a -18~-12 1200

Minimum Order: 3000

Color: Black Size: 8.9cmx5.0cmx1.6cm(3.5"x1.97"x0.63") , Weight: 65g Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet. Handheld and Vehicle/Motorcycle purpose.Waterproof Built-in GSM, GPS antenna, compact, elegant appearance. Sleep by shock sensor mode, sleep by time mode, multiple power-saving mode Less gprs traffic mode (Money save model) Movement, Geo-fence, over speed, ACC, shock, EXT.power, lower battery alert Engine stop and resume Fuel level measurement, fuel theft and leak alert ARM & DISARM BY SMS Support GPS and LBS (Location based service) double tracking solutions. Support SMS/GPRS/Internet Network data transmission (GPRS/Internet instructions includes in CD in package) Support configure the settings remotely Set multiple functions of security, tracking, monitoring surveillance, emergency alarms and management in its entirety. Used widely for person, vehicle and other moving objects tracking.

Minimum Order: 1 bags

Color: Black Size: 8.9cmx5.0cmx1.6cm(3.5"x1.97"x0.63") , Weight: 65g Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet. Handheld and Vehicle/Motorcycle purpose.Waterproof Built-in GSM, GPS antenna, compact, elegant appearance. Sleep by shock sensor mode, sleep by time mode, multiple power-saving mode Less gprs traffic mode (Money save model) Movement, Geo-fence, over speed, ACC, shock, EXT.power, lower battery alert Engine stop and resume Fuel level measurement, fuel theft and leak alert ARM & DISARM BY SMS Support GPS and LBS (Location based service) double tracking solutions. Support SMS/GPRS/Internet Network data transmission (GPRS/Internet instructions includes in CD in package) Support configure the settings remotely Set multiple functions of security, tracking, monitoring surveillance, emergency alarms and management in its entirety. Used widely for person, vehicle and other moving objects tracking.

Minimum Order: 1 bags

Color: Black Size: 8.9cmx5.0cmx1.6cm(3.5"x1.97"x0.63") , Weight: 65g Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet. Handheld and Vehicle/Motorcycle purpose.Waterproof Built-in GSM, GPS antenna, compact, elegant appearance. Sleep by shock sensor mode, sleep by time mode, multiple power-saving mode Less gprs traffic mode (Money save model) Movement, Geo-fence, over speed, ACC, shock, EXT.power, lower battery alert Engine stop and resume Fuel level measurement, fuel theft and leak alert ARM & DISARM BY SMS Support GPS and LBS (Location based service) double tracking solutions. Support SMS/GPRS/Internet Network data transmission (GPRS/Internet instructions includes in CD in package) Support configure the settings remotely Set multiple functions of security, tracking, monitoring surveillance, emergency alarms and management in its entirety. Used widely for person, vehicle and other moving objects tracking.

Minimum Order: 1 bags

Color: Black Size: 8.9cmx5.0cmx1.6cm(3.5"x1.97"x0.63") , Weight: 65g Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet. Handheld and Vehicle/Motorcycle purpose.Waterproof Built-in GSM, GPS antenna, compact, elegant appearance. Sleep by shock sensor mode, sleep by time mode, multiple power-saving mode Less gprs traffic mode (Money save model) Movement, Geo-fence, over speed, ACC, shock, EXT.power, lower battery alert Engine stop and resume Fuel level measurement, fuel theft and leak alert ARM & DISARM BY SMS Support GPS and LBS (Location based service) double tracking solutions. Support SMS/GPRS/Internet Network data transmission (GPRS/Internet instructions includes in CD in package) Support configure the settings remotely Set multiple functions of security, tracking, monitoring surveillance, emergency alarms and management in its entirety. Used widely for person, vehicle and other moving objects tracking.

Minimum Order: 1 bags

Color: Black Size: 8.9cmx5.0cmx1.6cm(3.5"x1.97"x0.63") , Weight: 65g Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet. Handheld and Vehicle/Motorcycle purpose.Waterproof Built-in GSM, GPS antenna, compact, elegant appearance. Sleep by shock sensor mode, sleep by time mode, multiple power-saving mode Less gprs traffic mode (Money save model) Movement, Geo-fence, over speed, ACC, shock, EXT.power, lower battery alert Engine stop and resume Fuel level measurement, fuel theft and leak alert ARM & DISARM BY SMS Support GPS and LBS (Location based service) double tracking solutions. Support SMS/GPRS/Internet Network data transmission (GPRS/Internet instructions includes in CD in package) Support configure the settings remotely Set multiple functions of security, tracking, monitoring surveillance, emergency alarms and management in its entirety. Used widely for person, vehicle and other moving objects tracking.

Minimum Order: 1 bags