Consumer Electronics

This tracker is a newly product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. Multiple Tracking Ways: *Track by SMS with latitude and longitude *Real track by SMS on PDA Cell phone with the maps link. *Web based online tracking on PC at our server www.gpstrackerxy.com. *IOS and Android APP Function Description: *Unique mini size (6.0*3.5*1.8cm), waterproof IP67 *Built-in GSM, GPS antenna, Shock sensor. *Power supply: 8V - 40V, can use for vehicle, motorcycle, E-bike, Truck etc. *Google maps GPS car tracking system*Get location in real street/address name, send "address+pas Google maps GPS car tracking system *Remote Engine-stop and Resume(for BC) *Tracking function by timing and frequency *Authorized number added and deleted function *Geo-fence *Door/ACC Alarm *Movement alert *Over speed alarm. *Power supply disconnection alarm. *Low battery alarm function *Check the vehicle status *ACC ALARM, Shock ALARM *Alarm without GSM network service *Less GPRS traffic *Automatic update positions of vehicle turns *GPS blind area alarm *Remote controller function ( for C only) *Sleep mode Optional accessories: *Alarm siren (for C only) Specifications: DIM.6.0*3.5*1.8cm& , lt; , br>Weight:50g Network:GSM/GPRS Band frequency:850/900/1800/1900Mhz GPS sensitivity:-165dBm GPS accuracy:5m Power supply:8V - 40V Back up battery: Chargeable 3.7V 180mAh

Minimum Order: 50

Ct-GM451 U8 is a GPS Mouse receiver build-in well-known Ublox 8 GPS chipset. Ct-GM451 U8 provides customer high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities. Customers benefit from the strength of both companies. Thanks to the low power consumption technology, the Ct-GM451 U8 is ideal for many portable applications such as PDA, Tablet PC, smart phone, automotive etc. Features - 72 channel Ublox M8 positioning engine. - Ultra high sensitivity to -167 dBm. - GPS L1C/A, SBAS L1C/A, QZSS L1C/A and Galileo E1B/support. - Supports GLONASS and is ready for Galileo. - Supports UART, USB and RS232 interface. - Up to 10 Hz update rate. - LED indicate location fix. - Ultra low power consumption.<10mW required for TricklePower™ mode - Ultra miniature 29 x 29 mm dimension - Operating temperature range: -40 to 85°C - RoHS compliant (lead-free) - Water proof (IPX6) - Device Size:42.0 x37.0 x 15.0 mm Applications - Automotive - Personal/Portable Navigation (PDA) - Geographic Surveying - Sports and Recreation - Marine Navigation - Fleet Management

Marine GPS antenna equips innovative, high quality, performance and built- in RF protection circuit to protect the active LNA and high gain as well as value-added design at a wide range of power supply from 3v ~ 6v for any kinds of receivers. Performance Marine GPS antenna has ultimate performance and unique design which meets Marine, Networking and any GPS applications, which requires maximum performance and complete support. Features ● 10W RF protection ● Standard WAAS tune ● Short-circuit protection ● Wide range power input voltage from +3v ~ 6v ● Narrow band width at 10MHz for real GPS L1 signal ● Cable length 3M ● 2 stages active LNA ● Dual Filters BPF(directric)& LPF(lump element) ● Dielectric patch antenna ● Low noise, linear regulator ● High current shut down ● Radio frequency interference immunity (RFI) ● Improve overall GPS system resistance to interference General Architecture Design : 2 Stages active LNA Dual Filters, (BPF(dielectric) & LPF(lump element)) RF protection (10watt), nano-second Spark-Gap Dielectric Patch antenna Low Noise Low drop-out, Linear Regulator Performance Receiving Frequency :L1 Band(1575MHz) Output Impedance:50 ohms Polarization’s:Right Hand Circular (RHC) Bandwidth:＜50 MHz VSWR:1.8 Typical @ 1575MHz Elev. Angle Coverage:5~90 degree Az. Bearing Coverage:360 degree Filtering:Dual(BPF <50 MHz B/W > Over-all Gain:28dB (typical including 4dB cable loss & Filters) Over-all NF:<1.8dB @fo, 2dB max. LNA Characteristic:K=>1 Un-conditionally Stable RF Insertions loss:0.1dB, leakage power 100mW /1 watt input Electrical Power Input:+3Vdc to +6Vdc input, AutoSwitch Power Consumption:25mA Power Input Sensor:Reverse Polarity Short Circuit shutdown Over-Current Sensor:Thermal Over-current shutdown >+150degreeC Physical Dimensions:79d x 58h x 13mm Mount:13mm treaded (1/2inch) Radome Color:White Coax Connector:BNC,SMA,TNC, MCX Coax Cable:RG-58, RG-174, RG-316 Environmental Operating Temperature:-30 to + 85 degree C Storage:-40 to + 90 degree C

Features: - Powered by SiRF starV ultra low power core logic - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - Compact module size for easy integration - Dimension : 42.3 x 40 x 14.1 mm - Fully utilized SiRF starV upgrade features - Interface RS232 or USB ------------------- Connectec’ , s new generation Ct-GM551 of products utilizes SiRF starV and feature Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Advanced low power technology means there is no need to maintain full power to achieve maximum performance nor turning the GNSS receiver completely off to save power. It breaks old GNSS performance vs. power trade-off through the fusion of a new high-performance GNSS engine, advanced power management and a smart sensor interface to achieve high sensitivity hot-start conditions for fast location fixes. Special power modes (Push-to-Fix) ideally suited for camera and asset tracking use cases. Push-to-Fix is an intelligent periodic low power mode that can adaptively change power depending on the environment and motion conditions. Advanced algorithms and a powerful on chip DSP processor maintain high accuracy(QoS) while achieving the lowest power level possible for the given environmental and motion conditions. Data logging can be achieved with a very low energy- per-fix and completely independent of the host processor, which could be power off. Dynamic contextual awareness, temperature monitoring and MEMS sensors work in concert to conserve power and boost performance. This opens up a wide variety of use cases for sports camera, asset tracking and fitness devices. Premium on-chip software provides a new level of continuous location awareness by employing the following advanced technology: * Advanced power management allows GNSS receivers to stay in a hot-start condition nearly continuously while consuming very little power. * Local or server generated ephemeris prediction, from three days to one month in advance to boost sensitivity and performance. Hardware Specification : * Chipset : GSD5e/ROM Base SiRF starV low power single chipset * General - Frequency : GPS L1, 1575.42 MHz GLONASS L1,1602~1615MHz - C/A code :1.023 MHz chip rate - Channels :52 - Sensitivity : GPS -165dB/GLONASS -161dB * Accuracy - Position : < 2.5 meters - Velocity : 0.01 meters/second - Time : 1 uS synchronized to GPS time * Datum - Default WGS-84 - Other : selectable for other Datum * TTFF(@ -130dBm) : - Reacquisition 0 :.1 sec., average - Snap start : 1 sec., average - Hot start : < 2 sec. - Warm start : < 20 sec. - Cold start : < 30 sec. * Dynamic Conditions : - Altitude : 18,000 meters (60,000 feet) max. - Velocity : 515 meters/second (1000 knots) max. - Acceleration : 4g, max. - Jerk : 20 meters/second3, max. * Power - Main power input : 5 VDC input - Power Consumption Average: 60mA (Tracking Mode) - Backup Power (VSTBY) 3.3V DC battery input * Serial - Port Electrical interface Default RS232/UART/USB - Protocol messages NMEA

This antenna system consists of two functional blocks, the LNA portion and the patch antenna. GENERAL ENVIRONMENTAL CONDITIONS Operation Temperature : -30℃ to + 80℃ Storage Temperature : -40℃ to + 100℃ Relative Humidity : 40% to 95% ELECTRICAL SPECIFICATIONS Operation Voltage : Min:2.5V Typ: 3.0V Max:5.5V Current Consumption : Typ: 11mA Max: 15mA @3.0V ANTENNA Frequency Range : 1575.42 ± 1.023 MHz. Bandwidth : 15 MHz min. ( Return loss –10 dB ) GAIN : at Zenith : + 5.0 dBi Typ. at 10° Elevation: -1.0 dBi Typ . Mounted on the 70mm*70mm ground plane. Polaration : RHCP Axialration : 3.0dB Max Mounted on the 70mm*70mm ground plane. LNA Frequency Range : 1575.42 ± 1.023 MHz Gain : 28dB Min. 30dB Typ. ( + 25 ℃± 5℃) Noise Figure : 1.6 dB Max. ( + 25 ℃ ± 5℃) @ 3.0V Output Impedance : 50Ω TOTAL SPECIFICATIONS (Through Antenna, LNA, Cable and Connector) RF Cable : RG174 , ψ2.7 ± 0.2mm , Black Cable Length : 5M ± 5cm RF Connector : SMA 180°(M) Frequency Range : 1575.42 ± 1.023 MHz Gain : at Zenith : Typ 35 dBi – (cable loss) Note:1 mounted on the the 70mm*70m ground plane Output Impedance : 50Ω Output VSWR : 2.0 Max

Features ● High gain and low noise figure ● With high rejection saw filter ● Ultra low power consumption ● Excellent Temperature Stability ● Magnetic Mount Base ● Varied cable length and connectors are available Application ● Car navigation system ● A.V.L tracking system Specification Dimension:L: 46.5mmW:46.5mm H:14mm Waterproof:100% waterproof Plastic color:Black Cable type:RG-174 Cable Length:5 meters Connector Type:SMA Mounting Method:Magnet

The Ct-G153 utilized SiRFstarV ™ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - Quad-GNSS : GPS and GLONASS, Galileo and BDS with future firmware update. Improving availability and accuracy of position solutions in urban canyon environments. - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. Hardware and Software - Based on the high performance features of SiRFstarV™ low power single core logic. - Adaptive micropower controller - Only 50 to 500μA maintains hot start capability (core logic) - < 10mW required for TricklePower™ mode - RoHS compliant (lead-free) - SMT pads allow fully automatic assembly processes equipment and reflow soldering - Advanced navigation features - Smart sensor supported by I²C interface - External interrupt input for context change detection Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware™ technology - Support adaptive“Micro Power Controller”power management mode. - < 10mW TricklePower™, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application - Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different applications - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete positioning process with limited time just like hot start.

The Ct-G340 w/Ct-G530P module is high performance, low power GNSS receiver, based on the SiRFStarVTM single chipset technology while providing fast time-to -first- fix. Its far reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications. Ct-G340 w/Ct-G530P is designed to allow quick and easy integration into GPS-related applications, especially for compact size devices, such as: - Fleet Management / Asset Tracking - AVL and Location-Based Services Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - 52 track verification channels - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - RF Metal Shield for best performance in noisy environments - High sensitivity navigation engine (PVT) tracks as low as - GPS: -165dB, - GLONASS: -161dBm - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Tracks up to 8 CW jammers - Enbedded CGEE/SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high performance features of the SiRFstarV™ low power single core logic. - Adaptive micropower controller - Only 50 to 500μA maintains hot start capability (core logic) - <10mW required for TricklePower™ mode - RoHS compliant (lead-free) - Advanced navigation features - Smart sensor supported by I²C interface - External interrupt input for context change detection - MCX vs. RMCX or RSMA RF Connector select Advantage - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware™ technology - Support adaptive “Micro Power Controller” power management mode. - <10mW TricklePower™, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application - Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different application - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete positioning process with limited time just like hot start.

The Ct-G353 utilized SiRFstarV ™ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo- tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -159 dBm52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV™ low power single core logic. - Adaptive micropower controller - Only 50 to 500μA maintains hot start capability (core logic) - < 10mW required for TricklePower™ mode - RoHS compliant (lead-free) - Advanced navigation features - Smart sensor supported by I²C interface - External interrupt input for context change detection Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -163dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware™ technology - Support adaptive“Micro Power Controller”power management mode. - < 10mW TricklePower™, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application - Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different applications - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete positioning process with limited time just like hot start.

Ct-G530P utilized SiRFstarV ™ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built- in DSP and extremely low power consumption, the family can get fast location fixes for geo- tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV™ low power single core logic. - Adaptive micropower controller - Only 50 to 500μA maintains hot start capability (core logic) - < 10mW required for TricklePower™ mode - RoHS compliant (lead-free) - SMT pads allow fully automatic assembly processes equipment and reflow soldering - Advanced navigation features - Smart sensor supported by I²C interface - External interrupt input for context change detection Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware™ technology - Support adaptive“Micro Power Controller”power management mode. - < 10mW TricklePower™, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different application - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete positioning process with limited time just like hot start.

Ct-G354 of products utilized SiRFstarV ™ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV™ low power single core logic. - Adaptive micropower controller - Only 50 to 500μA maintains hot start capability (core logic) - < 10mW required for TricklePower™ mode - RoHS compliant (lead-free) - Advanced navigation features - Smart sensor supported by I²C interface - External interrupt input for context change detection - MMCX RF Connect Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical ‧signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware™ technology - Support adaptive“Micro Power Controller”power management mode. - < 10mW TricklePower™, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application - Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different applications - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete positioning process with limited time just like hot start.

Key Features •Concurrent processing of 3 GNSS (GLONASS, GPS, GALILEO) •Support SBAS (WAAS, EGNOS, MSAS, GAGAN, SDCM) •44 tracking channels •Standalone and code-differential (RTCM SC104 v2.3) operation modes •1PPS output for precise timing applications •Binary and NMEA data outputs •Positioning update rate up to 10 Hz •Built-in antenna monitor to track open and short antenna connections Product description The GeoS-5M is based on the high performance G5 GNSS engine designed by our company. The GeoS-5M module is capable of tracking and processing with three GNSS (GLONASS, GPS, GALILEO) and SBAS (WAAS, EGNOS, MSAS, GAGAN, SDCM) signals concurrently, which is especially beneficial in difficult environments such as urban canyons or under tree canopy. Extended ephemeris technology allows the user to get position fix quickly after power-up (within 10 s) with acceptable accuracy. The GeoS-5M features auxiliary functionality such as Data logger, Odometer and Geofencing for easy integration to customer applications. The GeoS-5M supports two dynamic modes: standard (default) with acceleration up to 4 g and high dynamic (optional) with acceleration up to 25 g.Communication with the module is accomplished through a dual serial interface (DUART) that supports NMEA 0183 v4.10 and GSN binary data protocol. 1PPS output enables the use of the module in precise timing applications. Modules are offered in 14.3x13.7 mm 24-pad LCC package.

Ct-G551 3.3V utilizes SiRFstarV ™ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family deliver highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built- in DSP and extremely low power consumption, the family can get fast location fixes for geo- tagging images or videos, asset tracking and wearable applications. Premium on-chip software provides a new level of continuous location awareness by employing the following advanced technology : ‧Advanced power management allow the GNSS receiver to stay in a hot-start condition nearly continuously while consuming very little power. ‧Local or server generated ephemeris prediction, from three days to one month in advance boost sensitivity and performance. Hardware and Software - Based on the high performance features of the SiRFstarV™ low power single core logic. - Adaptive micropower controller - Only 50 to 500μA maintains hot start capability (core logic) - <10mW required for TricklePower™ mode - RoHS compliant (lead-free) - SMT pads allow fully automatic assembly processes equipment and reflow soldering - Advanced navigation features - Smart sensor supported by I²C interface - External interrupt input for context change detection - Dimension : 15 x 14 x 2.8mm Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as : - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X ‧It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. ‧Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) ‧Support SiRFaware™ technology ‧Support adaptive “Micro Power Controller” power management mode. ‧<10mW TricklePower™, so user can leave power on all day instead of power off. ‧Suitable for battery drive devices that need lower power consumption application ‧Ideal for high volume mass production(Taping reel package)

Wholesale China Supplier Vehicle Car GPS Tracker GPS-303G, Android Ios APP Truck GPS Tracker 1, Summary This tracker is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker     2, Specifications Content Specification DIM 9.6×5.3×1.6cm Weight 70g Network GSM/GPRS/WCDMA Band 850/900/1800/1900MHz/2100 MHZ GPS sensitivity -159dBm GPS accuracy 5m GPS start time Cold status  45s Warm status  35s  Hot status  1s Car power supply 12 V -24V Back up battery Chargeable 3.7V 350mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing 3, Features and Functions: GSM/GPS LED Indicator Initialization Change Password Authorization Single Locating Auto track continuously Automatic update positions of vehicle turns GPS drift suppression Absolute street address by SMS Location based service (LBS) Data logging Data Load Forward the third parties' message Charges Inquiry Alarm Function Low battery alarm External Power off alarm GPS blind Spot alert SOS Geo-fence Multi-area management Movement alarm Over speed alarm ACC working alarm Alarms under Arm State 1 ACC alarm 2.Shock Sensor alarm Alarm without GSM network service Check the Vehicle State Reset Hardware Sleep Mode 1 Sleep by time 2 Sleep by shock sensor 3 Deep Sleep by shock sensor 4 No sleep mode Scheduled wake-up Check IMEI Set up Terminal (local) Time TCP / UDP Switch Configure parameters by USB GPRS setting Less GPRS traffic Modes Switch between "SMS" and "GPRS" Set up monitor center number Cut off the Oil and Power System Packaging Detail:  GPS unit 12PIN harness Microphone Relay Screwer Manua , l Giftbox Remote controller ( only for model 303G,303I)   Optional MicroSD Alarm siren(big or small both ok) Fuel sensor Product Photos :  gps 303F:  gps 303G  GPS 303H:  303I :  4, FIVE tracking solutions:   1. SMS tracking by calling with latitude and longitude, speed, battery status, Google map link 2. Get absolute street address by SMS 3. Free PC based tracking application (send you in CD package) 4. Optional web server 5. Free mobile tracking app for android/IOS phones Web server online tracking www.gpstrackerxy.com . It is ok to track 10,000pcs units in platform at one time ! 10 years free use on the web based platform and the mobile APP IOS&Android version Check demo on server 1 Account: demo         Password:8888 , For more information contact:  Zoe Zhang      Facebook: https://www.fa , cebook.COM/zhang.zoe.716  APP tracking: 5, FAQ:  Q1.What is the MOQ ? A:1000PCS for our own available designs Q2.Can I mix different designs?  A:No! Q3.Can I get a lower price if I order large quantities? A:Yes, cheaper prices with more bigger size orders. Q4.Can I add or delete items from my order if I change my mind ? A:Yes, but before shipment. Q5.Can I get the pre-production sample ? A: Yes, For OEM order, it is ok to send samples for confirmation before mass prouction. Q6.When you ship my order? A: Normally 3-5days after receiving your payment, but it can be negotiated based on order qty and production schedule. Q7.How about the quality guarantee period? A: One year! Q8. How can you guarantee the production quality ? A:Our production quality follow ISO9001 and We have 17 years experience of QC team. We have strictly quality control system in our production process. We have 4 times inspection for each finished product before package Third part inspection accepxable Q9.What is the packing box? A: Generally, we pack our goods in neutral white boxes and brown cartons. Q10. What is your terms of payment? A: Order less than 1000 units, require full payment in advance, MOQ 1000 units, T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages  before you pay the balance. Q11. What is your terms of delivery? A: EXW, FOB, CFR, CIF, DDU. Q12. What is your sample policy? A: We can supply the sample, but the customers have to pay the sample cost and the courier cost. Q13. Do you test all your goods before delivery? A: Yes, we have 100% test before delivery Q14: How do you make our business long-term and good relationship? A:1. We keep good quality and competitive price to ensure our customers benefit ; 2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.

Minimum Order: 1 bags