Construction & Real Estate

The Multi-story Steel Building consists of beams and columns of welded H- beams, hot-rolled H-beams. In this frame, the beam-column system is subjected to gravity loads such as dead and live loads. Steel frame structures are now mainly used in residential, commercial, and institutional buildings around the world. The advantages of using steel framing in multi-storey building construction are as follows: Steel, with its high strength-to-weight ratio, enables large spans and lightweight structures. Steel frames can come in a variety of structural forms, such as braced and flexural frames tailored to meet specific requirements. Compared to reinforced concrete frames, steel frames are quicker to install and therefore more economical. The elements of the frame are usually prefabricated at the factory and subject to effective quality control, resulting in a better product. Subsequent retrofitting or floor reinforcement of steel frames is relatively easy compared to concrete frames. Steel frame structures are better suited to withstand lateral loads caused by wind or earthquakes. Advantages Large span, large space, light weight, high rigidity, good seismic performance, etc. Recognized quality with low price Better design, quick response, good service Main functions Large span of the building space and install quickly Fast and easy installation greatly shorten the construction time which can reduce the costs Use Our target customer: Builders, schools, troops and the government Multi-story steel structure can be used as the roof of stadiums, theaters, exhibition halls, waiting halls, stadium stands, gas stations, toll stations, awnings, hangars, factory buildings and other buildings. Components Accessories or Parts

Introduction 18. Steel Truss Stadiums Advantages Greater span, Greater space, light weight, high rigidity, good seismic performance, etc. Recognized quality with low price Better design, quick response, good service Main functions Greater span of the building space and install quickly Fast and easy installation greatly shorten the construction time which can reduce the costs Use Our target customer: Builders, schools, troops and the government Herbert Steel Truss can be used as the roof of stadiums, theaters, exhibition halls, waiting halls, stadium stands, gas stations, toll stations, awnings, hangars, factory buildings and other buildings. Components Accessories or Parts Applications Export cases Main markets include Middle East, South America, Southeast Asia, Central Asia, South Asia, Africa and other countries and regions Exhibitions we have participated

The scope of application of the machine It is suitable for the splicing of furniture panels, straight panels, integrated panels, core panels of wooden doors and cabinets, edge sealing of wooden doors, and line splicing of L-shaped door sleeves. High efficiency: High-frequency heating, only heating for glue joints, each board only needs to be heated for 60-120 seconds; Automation: PLC automatic control, touch screen operation interface, simple operation; High flatness: The two-dimensional pressurization rate is 10-15% higher than the traditional splicing machine; Stable quality: High-frequency electric field can detect materials with excessive moisture content and ensure firm splicing; Sterilization: Have insecticidal and sterilization functions; High energy saving: Independent research and development of high frequency generator, high frequency loss can be reduced by 15-20% compared with peers; The advantages of the series of HF wood board joining machine High efficiency, high flatness, stable quality. The high-frequency joining machine has higher flatness, higher yield, and less than 0.25mm sanding than the traditional machines. Because of the high-frequency heating properties, and the process of working, the machine can detect whether the moisture content of processed wood exceeds the standard, and kill the insects in the materials, more effectively ensuring the stability of finished panels after joining. The HF electric field will rapid heating the glues between the workpieces which can improve the efficiency greatly.

Minimum Order: 1 bags

Elevator Lop Panel For passenger Lift With Color Cop Lop Panel Graphic Elevator Tft Disl tft color display lcd and tft 18.5 " TFT and LCD display /Elevator Parts /LCD and TFT display board/ Picture and Vedio display /Dot Matrix Display Panels for Lifts and Elevator / LED Dispaly for elevator / LOP Display/Elevator COP Display/Elevator HOP Display/Elevator Floor Indicator LCD/TFT color display for li Parameter Product name LCD and TFT color board for display Input Voltage DC24V Visble area 306*230mm TFT display board dimension 354*298mm Power parameter DC18~36V Lift Interface bianry ,otis ,kone , Input Signal CAN RS 485 , binary code ,BCD Code Grey Code Picture or Vedio both vedio and pictures Shipping way By air ,by sea Features : 1.LCD and TFT indicator18.5" 2.Display elevator running state such as car moving direction .Showing vedio or pictures 3.The display can be vertical or horizontal 4. Support advertising pictures on its background . 5. Users can change the pictures or vedios as rquires 6. Supports display of time and date . 7.Full and Inspection or Stop function 8. Apply to COP of Elevators 9. Online Technical support 10. Floor number can be changed. 11.Interface are parallel 12. Input Signal can be 7 segment, Binary Code , BCD code ,Grey Code .RS485, CAN systtem 13. Customized solutions. Can Change time , picture , Vedio on line .

The “rock bucket” is used to ROCK HANDLING OPERATIONS, Huitong manufactures rock buckets for excavators starting from the 16-tonne class. We adopt Sweden- made HARDOX steel and advanced CNC Cutting Machine. All wear parts are made of HARDOX. The bucket body are made of 16MN. It's our toughest series of all time. And we made it for the harshest working conditions, such as: hard digging, loading rocks, coal mining. etc. Recommended for shot rock, stratified materials, or highly abrasive applications. Bucket Material Q345B Volume 0.34 CBM Color Yellow or costomer's request N.W. 2.15 kgs Logo Yassian or costomer's request Width 600 mm Suitable machine CAT; Komatsu; JCB; Hyundai; Doosan Packing Plywood pallet MOQ 1 pc Certificate ISO9001: 2015; SGS Delivery time 30-35 days Loading Port Ningbo; Shanghai; Guangzhou; Yiwu... Warranty 24 months Payment Ali Trade Assurance; T/T; L/C

BIC has developed a new type of Melting & Deicing device (MDD). MDD is installed horizontally between 0.5 and 1m below the water surface, using high-performance air-entraining technology to form micro-nano aerated water flow, pushing the bottom water body and surface water body to move forward quickly. Melting & Deicing device from BIC exchanges heat with the stratum water body and disturbs the water body in front of the sluice, so that the water body cannot form an ice core. Even in the severe cold winter, it will not form an ice layer, which effectively solves the frozen problem before the sluice. For the detaield melting and deicing solution, welcome to contact us! The structure of the device mainly includes high performance motor, integral stainless steel submersible anti-ice erosion shell, conveying cylinder, air storage chamber, bleed tube, impeller, water delivery bucket, bracket, cover net and other components. At the same time, MDD is equipped with a propeller blade, which stirs with water while the equipment sucks in the air, so that the water is quickly spread. The high-performance motor quickly mixes the compressed air in the air intake pipe and air storage chamber with the water body. Finally, the high- speed rotating impeller produces strong axial thrust and radial stirring, which crushes the compressed air in the water body to form tiny particles. Nano bubbles are oriented horizontally and pushed out into the water body through the conveying cylinder. The flow of micro-nano bubbles impacts, stirs, and pushes the water flow out to fan-shaped radiation. The accelerated bubbles diffuse and mix into the body water, making the water molecules less likely to condense in cold temperatures.

The Containerized Water Treatment Plant is one of the latest innovations developed by the Beijing IWHR Corporation(BIC). This product is divided into two series for sewage treatment and the water purification purpose. The plant size varies to accommodate differences in water processing volume and container size. Container Water Treatment Process Using braided belt type biological packing to lift removal rate in sewage treatment; Imported polyvinylidene fluoride membrane material, material has better strength as well as the stability. BIC containerized water treatment plant assimilates the system integration of sewage treatment plant and steel structure processing equipment, which owning itself advantages and characteristics: Relying on the container housing appearance, can meet the sea Shipment requirements, the transportation is extremely convenient; Easy installation, users only need to pass in and out water pipes could be directly connected with the equipment normal operation; The operation is simple, the equipment according to edit well in advance conditions, the control of automatic operation, can also according tothe needs of the users, manual control; Flexible operation, the equipment could adapt to the changing capacity of water ; Less investment, low operation cost, small footprint; Using the design principles of intensive, the system Configuration is more reasonable; System maintenance is very convenient and only personnel on a regular basis Patrol, mechanical and electrical equipment preventive maintenance; Process control system is very simple, reduced running the labor intensity of operation, sewage treatment system is safe and reliable. Advanced technology installed in our mobile water treatment plant, strictly tested and manufactured according to environmental and quality policy. One-stop service for setup and commission of water treatment system, which saves clients' labor,time and money. Designed for small and large scale of wastewater treatment and water purification, including industry or remote communities without municipal sewage system.

Simplified Elevated Dam(SED) constructed by BIC is a new type dam which uses manual hydraulic pump or diesel engine to control panels up and down for water retaining and discharging. SED is particularly applicable for no electricity area and sea coast. Don't need power transformers and power cables. Specification of Simplified Elevated Dam Retaining height: 1~4m Width of channel: 3~50m Panel material: Steel, Stainless steel Foundation: Reinforced concrete foundation Lift and Drop Time: 1~10min/span Application of BIC Simplified Elevated Dam Spillway, irrigation channel, landscape No electricity area No power transformer, no power cables Sea coast

Rubber dam is a new type of hydraulic structure compared with steel sluice gate, and made of high-strength fabric adhering with rubber, which forms a rubber bag anchoring on basement floor of dam. Filling water or air into the dam bag, rubber dam is used for water retention. River Course Rubber Dam can be divided into inflatable rubber dam and water filling rubber dam according to the filling and drainage methods. The filling and discharging time of the water filling rubber dam is longer than that of the inflatable rubber dam. In terms of cost, the two dam types are similar. The rubber dam empty water or air from the dam bag, it is used for flood release. The best quality river course rubber dam has gained high reputation for many advantages compared to conventional weirs, such as low cost, simple hydraulic structure, short construction time, perfect seismic performance and effect of stopping leading, and low resistance to water flow in flood season. Applications Rubber Dams have wide prospect in the world since they can be used especially for agriculture irrigation, pisciculture, hydropower generation for power station, flood control and water impound, city landscape environmental improvement and recreation purpose. Rubber Dams are not known to have other than beneficial impact on environment and ecology.

Hydraulic elevator dam, researched and developed by BIC, is an innovative achievement in water conservancy science and technology. It is the optimized combination of hydraulic "three-hinge-point luffing mechanism principe" and traditional sluice. Hydraulic cylinders support at the back of the panel to lift up the gate for blocking water or to drop down the gate in the case of flood discharging. It is applicable to various hydrological and geological conditions; it is widely used in river landscape, storage of irrigation water, expension of reservoir capacity and other water conservancy hydropower, water ecological civilization and urbanization construction projects. This technology has obtained series of patents issued by State Intellectual Property Office of P.R.C and has been listed in 2014 Catalogue of Key Promotion and Guiding for Advanced Water Conservancy Practical Technologies. Product Specifications Gate material: RCC/Steel/Stainless steel Gate type: Arc type/ plate type/shaped type(customized) Gate height (H): 0.5m-6.0m Width of single span:The standard width can be 6m, 7m or 8m; it also can be made to order. Hoisting structures: Plunger type cylinder/double-acting cylinder multi- stage cylinder. Control system: Manual control cabinet, PLC control cabinet, computer local cabinet, computer remote control. Synchronous dam elevating and lowering, automatic alarm function and dam lowering in case of exceeding water level. Design superiority.

Patch Cords GrenTech can provide single-mode and multi-mode patch cords with various connectors and customized length, which have low insertion loss, good reliability and stability. Contact GrenTech for more single mode fiber cable and multimode fiber optic cable info! If you want to know more types of fibe optic cable, please visit our website. GrenTech has a prominent position in the global sfp module industry, and it is the biggest base station RF device supplier of three out of the four big communication equipment manufacturers in the world, namely Ericsson, ZTE and Nokia. We also have types of copper SFP for sale, if you have needs, please contact us.

Minimum Order: 1 bags

Passive Product GrenTech is dedicated to the development of passive optical communication equipment. With years of R&D and production experience, GrenTech can provide high reliability, cost-effective solution to meet customer needs of WDM, patch cords, optical switches, PLC and other products. Contact GrenTech for more passive devices and active devices info! Patch Cords Grentech provides single-mode and multi-mode patch cords including LC, SC, ST, FC and other conventional connectors, as well as customized MPO. Mux/Demux GrenTech Mux/Demux series including CWDM, DWDM, OADM, AWG and other relative products. It has characteristics of low insertion loss, high isolation, stability and reliability to meet the application requirements of various WDM scenarios. PLC Splitter Grentech PLC is an integrated waveguide optical power distribution device based on the quartz substrate. It has the characteristics of small size, wide operating wavelength range and good spectral uniformity. It is mainly used in FTTH, passive optical networks and cable TV networks, etc. Fiber Distribution Box Series GrenTech provides two kinds of indoor and outdoor optical splitting boxes, which can be customized according to customer needs. They are mainly used in FTTH networks, Telecom networks, CATV networks, Data communication networks, LAN, etc. Fiber Components GrenTech active components and passive components in electronics, including a variety of flanges, optical fiber connector, optical attenuator, to meet the connection of optical path and power adjustment. Optical Switch GrenTech has introduced the 1X1, 1X2, 2X2, and other 1XN channels of the mechanical optical switch. It has low insertion loss, small volume and other advantages, to achieve the optical circuit switching function. If you want to know more types of passive components, please contact us.

Minimum Order: 1 bags

We discover the infinity of light. GrenTech's comprehensive fiber optical products portfolio ranges across virtually every communication network, including telecommunications, business, and data centers. Different Types of Optical Fibre Advantages of Optical Transmission Application of Optical Communication The Internet, mobile phones, IP phones and other devices use networks to connect everyone to their region, to the entire country, and even to the global communications network. Signals from computers and mobile phones, for example, are received in the base stations of local carriers and network providers and are then transmitted around the world via optical fibres in undersea cables. Because of its efficiency and high transmission capacity, fiber optic transmission is widely applied for data transmission and is progressively being employed in place of metal cables. Fiber optic cables have now indeed largely replacing copper twisted-pair cable or coaxial cable. Certainly that as the use and demand for high bandwidth and fast speeds grow, fiber optic transmission will provide more options and will be continually developed and extended to meet future needs. Contact Grentech for more fiber transmission and optical fibre cost info! Optical Transmission FAQ Q What is optical transmission? A Video, audio and control signals are generally transmitted through an electric wire made of copper. In contrast, a method for sending these signals as optical signals and converting them back into electric signals on the receiver side is generally called "optical transmission" or "optical communication." The optical signals are transmitted through an optical fiber. Conversion from electricity into the light is called "E/O conversion," and conversion from light back into electricity is called "O/E conversion." Q How does optical communication work? A We rely on them to transmit light signals over long distances. At the transmitting source, the light signals are encoded with data… the same data you see on the screen of a computer. So, the optical fiber transmits “data” by light to a receiving end, where the light signal is decoded as data. As one of fiber optic companies, we have types of related products for sale, and the optical fibre price is affordable, if you have needs, please contact us. If you want to know more details of optical communication application, please visit our website. We also have types of 10G SFP+ optical transceiver for sale, if you have needs, please leave us a message.

Minimum Order: 1 bags

Optical Fiber Switch GrenTech provides a full range of all optical switches with stable and reliable performance. They are mainly used in light path switching, instrumentation, system detection, signal upload and download and so on. If you want to know more types of optical switches, please visit our website. As a fiber optic products supplier, we can offer different kinds of patch cords for sale, anything you need, please leave us a message.

Minimum Order: 1 bags