Construction & Real Estate

Fiberglass self-adhesive joint tape can be widely used in wall constructions to join plaster plates, mend drywall racks. As dry wall tapes, the fabric enable the base plaster join faster, adhesive better without pasting or stapling. This is a small roll fabric cloth with width of 50mm or 100mm suitable for wall repairing. The Coated Fiberglass Mesh with custom width for reinforcing exposed areas of external and internal plasters, mainly wall joints, windows and door corners and the channels for water or gas pipes and electrical wiring. It is strong recommended that a strip of glass fiber mesh is applied over the joint when two materials with different coefficients of expansion meet one other; In this case there is a risk that the plaster coat will crack, mesh fabric can absorb the tension and avoid the plaster coat is cracked. Water Proof Flame Retardant Joint Tapes Adhesive drywall plastering mesh tape made of alkali resistant fiber mesh is strong, fire resistant, corrosion resistant, not easily torn. Common specification: •Mesh: 9×9, 8×8 mesh etc; •Weight/m2: 70g-80g; •Length/roll: 45m, 50m, 90m,153m or 200m; •Width/roll: 50mm or 100mm; •Colors: White, blue, green and other colors; •Special products are available according to requirement of customers.

C-glass yarn plain weaving fiberglass mesh is widely used as base ventilatin fabric used in tunnel and mine, underground or smelting plant after soaked by special technique. Glass fibre mesh fabric for ducting has strong tension, well heat resisting, anticorrosive, resistance to burn, strong adhesive power. Standard Thickness of Glass Fibre Mesh Fabrics of Ducting: 0.28mm. Standard fabric width: 0.915m. Standard weight: 273g/m2. Characteristics: Good heat resistance-Continuous working temperature -70℃~230℃. Excellent climate resistance,long service life. High insulation resistance-Dielectric constant is 3-3.2, breakdown voltage is 20-50KV/MM.

Fiberglass Geogrid Composite Geotextile Fabric Providing Improved Loading Capacity of Road Construction Composite Geogrids are used for stabilize soils where a both reinforcing and separation between a granular base and very fine soil is required. The geocomposite binds closely to the soil being reinforced, separates different soil types and provides an effective filter action. Composite geogrids are made by bonding a nonwoven geotextile to fiberglass geogrid. The polypropylene / polyester geotextile stitch bonding or paste on the fiberglass geogrid. With high tensile strength and excellent anti-tearing and anti-bursting performance, this new compound building materials are widely used in water conservation, road construction,architecture, subway and tunnels construction. Typical Structures of Compound Fiber Glass Materials: For fiberglass geogrid composite geotextile materials, geogrid used has a tensile strength of 20KN to 400KN. Mesh size: 12.7x12.7mm, 25.4x25.4mm, 50x50mm Elongation: <=4% or 3%. Geotextile: Non woven PET or pp geotextile Unit weight: 25g/m2 to 500g/m2.

Fiberglass Mesh Reinforcing and Bonding Cement, Roofing Tiles, Mosaic and Various Building Materials Commonly used for cement reinforcing woven fiberglass fabric is 20 x 10 mesh, while various specifications available. The woven fiber open mesh made of yarns of flexible filaments offers strong bonding. It has tensile strength of 75 lb. per inch. Fiberglass mesh coated is acid and heat resistant, and will not rot or decay. The special coating on the fabric minimizes distortion and is compatible with asphalt cements and coatings, emulsions, solvent-based and hot- melt types. Popular yellow color helps ensure the fabric is completely submerged in roofing cement. Features: Good alkaline-resistance, high strength, excellent alkali and acid resistance, good cohesion, excellent in coating etc. Application: Wall reinforced material (such as fiberglass wall mesh, GRC wall panels, EPS insulation with the wall board, gypsum board, bitumen) Reinforced cement products. Used for Granite, mosaic, marble back mesh etc. Waterproof membrane fabric, asphalt roofing. Fiberglass Reinforcing Mesh for Cement Tiles Reinforcing the backside of custom cement tiles Mesh tape: 36” wide

Fiberglass fabrics are widely used in the construction industry to reinforce the tensile, impact and flexural strengths of plasters, rendering stuccos, etc. They are also used as fiberglass window screening, swimming pool enclosures, sunshade screening and geo engineering materials. Glass fiber textiles for geo works have high intension, high tenacity, high occlusive force with soil or gravel, excellent erosion-resistance, water drainage, light weigt. Fiberglass mesh geo textiles are used to reinforce soft soil roadbed, river side slope of embankment, inhibit ground deformation, prevent crack caused by reflection, increase loading capacity of the pavement. Polyester filament geotextile is made by polyester textile needle consolidation, from 80-800g/m2, it is geosynthetic fabric used in geotechnical and civil engineering. The three-dimensional structure of the fiber has good mechanical properties and a good drainage performance. Synthetic geotextile enjoys good elongation properties, anti-aging chemical stability and high resistance to acid. The geotextile has a wide range of pore sizes and tortuous pore distribution to achieve excellent permeability and filtration performance. Geotextiles of Fiberglass, PP or Polyester Filament Synthetic Fabric is mainly used in following fields: 1, Water conservancy project dams and slope of filtration, channel isolation, impervious; 2, Highways, railways, airport runways based isolation, filtration, drainage, slopes, retaining walls and pavement reinforcement, drainage; 3, Port engineering soft ground, beach causeway, harbor piers and breakwaters reinforcement and drainage system

Fiberglass screen mesh has stable shape, straight surface and a long service life. It is well ventilate, easy washing, resistant to fire and corrosion proof. This fiber glass fabric is mainly used as insect screen or sunshade screen mesh in many countries. It can be made into insect proof ventilate screen for window or door shield, pet screen, fiberglass portiere and other forms for a wide range of applications. Fiberglass Screening Used for Ventilation, Insect Preventing, Installed on Windows and Doors Vinyl-Coated fiberglass screen is a kind of fiberglass mesh fabric made under the process of plastic-coating, plain weaving, and high temperature-fixing. It is supplied in rolls or we can cut it to pieces of certain sizes according to customers request. Specifications: Diameter:0.011i , nch,0.013inch; Standard (Mesh/inch ): 18x16, 18x14,14x14,20x20, 18x18, 16x16; Standard Color: White, Black, Grey,Coffee etc. Standard Width(inch): 24", 30", 34", 36", 42", 48", 60", 72",84",96",108"; Special Size are available according to requirements of customers.

Fiberglass reinforcement mesh can be supplied in rolls or tailored with razor or knife to stripes for reinforcing the wall plastering as well as for mending the possible cracks or hole in the concrete wall surface. Applied to both exterior and interior structural render reinforcement. Why Fiberglass Reinforcing Mesh instead of Metal Wire Mesh Reinforcement? The latex finished fixed warp and weft yarns of Fiberglass Mesh Fabrics have the properties of high strength and high alkali resistance. With high strength, durable service and excellent property against acid and alkali, fiberglass mesh net is the alternative to steel mesh for exterior and interior concrete wall rendering, reinforcing and stucco plastering. Fiber reinforcement mesh enjoys easy operation, material saving, long life, it is the ideal energy-saving insulation materials. Fiberglass mesh or geogrid for concrete rebar or reinforcement to replace steel rebarPlain Woven Style Fiberglass Mesh Netting for Concrete Rendering and Reinforcement Orange Color and Other Colors Fiberglass mesh 48”x150’, alkali resistant, fire retardant, 152 gr/m2, applied in Construction of EIFS System, Mortar Reinforcing and Plastering Wall Reinforcement. Plain woven fiber fabric for external wall and internal wall rendering, particularly around openings or areas of traditional weakness.

Fiberglass drywall plaster mesh is a latex coated fiberglass net fabric, used for drywall work and plastering repair. The fiber plaster stucco mesh has a unique cross-fiberglass construction to provide greater joint strength than conventional fiberglass mesh tapes. Plaster or Stucco Mesh has two forms of supply: Tape rolls or cut pieces. Fiberglass tapes can be used directly as stucco mesh in general wall coating plastering and stucco works. The square hole fiberglass mesh pieces can be bonded to the perforated steel angle bead as mesh wings for plaster trimming works, especially for corner plastering. Plastering drywall tape is widely used in joining plaster plates, mending drywall cracks and piecing together and making up different kinds of plates. It goes on faster, adheres better, and requires no pasting or stapling. It will not tear, shrink, stretch or bubble, while it hides joints, cracks and holes permanently. Jumbo rolls available. Products Fiberglass Woven Mesh Fabric for plaster reinforcement 20 cm x 50 m Tensile Strength: Warp 2000 N per 5 cm Weft 2200 N per 5 cm Mesh size: 6x6 mm Weight 168 g/m² Shipped in 20ft container to the Middle East. Product Size / Rolls per carton 50mm×20m(2"×65") / 72 50mm×45m(2""×150")/ 54 50mm×90m(2""×300") /24 50mm×153m(2""×500") /24 45mm×20m/ 72 45mm×45m /54 45mm×90m /24

EIFS Fiberglass Mesh is made of alkaline resistant fiber yarns and has been tested to DIN EN ISO 13934-1 tensile strength standards. We offer three types of EIFS fibreglass mesh for rendering uses: Heavy Duty Fiberglass Mesh for EIFS: Heavy weight external mesh designed specifically to reinforce areas exposed to increased stress, especially a plinth and other demanding places; Medium Duty EIFS Mesh: Medium weight fiberglass cloth is commonly used for reinforcing and rendering surfaces with a big opening of 10mm x 10mm; Standard mesh for EIFS: Standard weight fiber glass mesh fabric for common stucco skim coating, mosaic tile backing and marble backing. 4x4 160g Fiberglass mesh for EIFS systems Construction material Roll size: 1m width x 50 m length Mesh size: 4mm x 4mm Quality: 160g/m2. Packed in 1x20 full containers. Fiberglass Mesh applied to cement, plaster, walls, buildings and other structures inside and outside surface for base coat plastering and rendering, a new type of building materials for external wall stucco works. The EIFS mesh stripes are made from C-glass impregnated with alkali-resisting dispersion. Available in three widths, two weights and two colors (white and yellow). With a stable structure of the fibers, the fiberglass grid netting has high tensile strength, a uniform mesh opening and a smooth surface and resistance to alkali present in the chemical composition of plasters and paints.

We are reliable and long term supplier of fiberglass mesh for many customers in Turkey, Chile, USA, Spain, Middle East and other countries. Our fiberglass or fibre glass mesh is mainly used for Construction Industry, Tiles Industry and Electrical Industry for reinforcement. We mainly supply fiberglass ( fibre glass) mesh and non impregnated fiberglass mesh with following details. Fiberglass Mesh Woven by Fiberglass Yarn Fiberglass mesh woven by fiberglass yarn and then coated by alkaline resistant latex as per below details. Fibre Glass Mesh Roll 145 GSM Fibre Glass Mesh 45 GSM x 1000 mm width Fibre Glass Mesh 70/80 GSM x 1000 mm width Fibre Glass Mesh 110 GSM x 1000 mm width Fibre Glass Mesh 145 GSM x 1000 mm width Fibre Glass Mesh Roll 145 GSM x 50 mm width Fibre Glass Mesh Roll 145 GSM x 100 mm width Fibre Glass Mesh Roll 145 GSM x 150 mm width Fiberglass Mesh 150 GR. Mesh 4 X 4 Roll size: 1m x 50m Material grade: C Color: Orange Weight: 150 gram / m2 Packing: Opp film per roll, 2 rolls packed in one plastic bag. Fiber Glass Mesh 160 GR. Mesh 4 X 4 Roll size: 1m x 50m Material grade: C Color: Orange Weight: 160 gram / m2 Packing: Opp film per roll, 2 rolls packed in one plastic bag. Fibre Glass Mesh 180 GR Fiberglass mesh 4x4 Weight: 180gr/m2 Color: Orange color Roll size: 1m x 50m or custom Packing: Opp film per roll, 2 rolls packed in one plastic bag. Fiberglass Mesh 90 GR Mesh 4x4 Rolll size: 1mx50m Weight: 90gr/m2 Color: White Packing: Opp film per roll, 2 rolls packed in one plastic bag. Fiberglass Mesh 60 GR Mesh 2x2 Weight: 60gr/m2 Color: White Packing: Opp film per roll, 2 rolls packed in one plastic bag. Fiberglass Mesh 95G/110G Fiberglass mesh roll 50mx1m Weight: 95g/110g Non Impregnated Fiberglass Mesh Non impregnated fiberglass net, used for manufacture of flap butt-end wheels as backing.

Tuff mesh with vinyl powder coating can be used for porch screen, window screen, door screen, pet screen and security netting. Woven by high tensile stainless steel AISI/SUS316 or 304 wire, aluminum wire or galvanized wire, also non metal materials of polyester, pp and fiber glass. Surface finished with powder coating.Durable and strong heavy type Tuff mesh is excellent for use in patio and porch enclosures as well as windows and doors. Powder Coated Polyester / PVC / Fiberglass Mesh Tuff Window Screen for Houses, also Patio and Porch enclosure as well as windows and doors: Heavy duty insect screen againest insect, pet and theft. Perfect flat surface,equal aperture,no faults and high security. Specification: Mesh count 11 x 11,Wire diameter 0.71mm/0.8mm 750mm x 2000mm or 2400mm 900mm x 2000mm or 2400mm 1200mm x 2000mm or 2400mm Vinyl or Epoxy Powder Coated Black Metal Extra Tough Tuff Mesh: Stainless Steel Woven Mesh and Aluminum Woven Wire Mesh for Security: Tuff Metal Screen has been developed to strengthen security doors and windows, used on security doors or sliders that have high traffic areas which may potentially damage the mesh. Metal tuff mesh coated black mesh offers extra toughness and superior strength protection. The Coated Black Stainless Steel Mesh or Aluminum Mesh ensures an unobstructed viewing from inside, when placed on Security Doors or Screens. * Standard Color = Black * Standard Widths = 36", 48", 60", 72",96" and 120" * Standard Roll Length = 100' Mesh Count = 17 x 13 Yarn Diameter = .018 Fabric Thickness = .027 Openess Factor = Approximately 45% UV Blockage = Approximately 55% Breaking Strength (lb) = 140 Warp, 112 Fill

Fiberglass Mesh Grid made of chopped strands is used with the asphalt mat to form a concrete reinforcement system for road pavement. The fiberglass grid has an elastomeric polymer coating which enables it excellent corrosion, alkali and acid resistance property. The thus coated glass fiber pavement mesh gridding panel is tough and suitable for used as reinforcement materials for road surface and bases construction. Alkali Resistant Coated Fiberglass Mesh is a kind of innovated modern Geogrid Textile Fabric for pavement reinforcement. This product is made with coated fiber glass yarn. It has excellent properties like high alkali-resistance; good cohesion, flexibility, tensile strength, etc. Alkali coated fiberglass mesh can be widely used in wall heat reservation system, water-proof and preventing cracks in walls and road constructions. Fiberglass pavement mesh grid is designed in sheet panel structure with high tensile strength in vertical and horizontal directions, low elongation, high elastic modulus, high and low temperature resistant properties. A composite grid grating can be made of fiberglass and resin by the mould technology with heavy bearing capacity. The fiberglass composite grid panel is safe for heavy pavement strengthening.

EN 10305-4 Cold-Drawn Precision Steel Tubes Supplier: Precision Steel Tubes, EN 10305-4, E215, E235, Cold-Drawn, OD 2 Inch, 5-80mm, WT 1-15mm, L≤12000mm. Hydraulic and Pneumatic Caparo Precision Steel Tubes are manufactured according to technical standard of EN 10305-4 E235 E355 +N, with the characteristic of good tolerances and perfect surface quality for both OD and ID, SSID is available according to customers PO and specific requirement. Both OD and ID surface roughness is well controled during cold drawing or cold rolled production, usually the delivery condition would be +C or +N. 1. Seamless Precision Steel Pipe Standard: EN 10305-4 Cold drawn tubes for hydraulic and pneumatic power systems. 2. Seamless Precision Steel PipeSteel Grade: E215, E235, E275, E355, other materials upon agreement with customers. 3. Seamless Precision Steel Pipe Production method: Cold drawing on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance, with certain heat treatment to achieve better mechanical properties for bending and pressure purposes.

Minimum Order: 1 bags

BS EN 598 Ductile Iron Pipe Offer: Ductile Iron Pipe, ISO 4179, BS EN 545:2002, BS EN 598:2007, DN80-1400, Length 5.7m, 6m, Class K7, K8, K9, K10, K12. Joint type: spigot and socket tyton joint. Diameter: DN80-1400 mm. Length: 5.7, 6m. Internal anticorrosive lining. Common on CML (cement mortar lining), or high alumina CML Highly wear resistant. External anticorrosive property. Standards: ISO 4179, BS EN 545:2002, BS EN 598:2007. External anticorrosive coating. Metallic zinc coating 130, 150, 200gsm. Bituminous coating minimum 70um. Working temperature: -25℃ to 180℃. Sealing gasket NBR, SBR, EPDM, or nature rubber ring as per ISO 4633. Fittings: tyton ductile iron fittings. Wall thickness class: K7, K8, K9, K10, K12.

Minimum Order: 1 bags