Construction & Real Estate

SVM Exports Morinda Citrifolia Fruit is used for everything like joint pains, immune problems, pain relief, cellular regeneration and more. Morinda fruit contains a number of enzymes (proteins) and alkaloids that are believed to play a pivotal role in good health. There are researches to conclude that Morinda fruit stimulates the immune system, regulating cell function and cellular regeneration of damaged cells. It is particularly useful in supporting the nervous and structural systems (especially pain in joints) and for skin health. Morinda has gained popularity with anecdotal evidence claiming that it is beneficial in fighting fatigue, depression, and arthritis. Morinda Fruit is most well-known for is the compound alkaloid proxeronine, which is believed to be a precursor to xeronine. Xeronine is an alkaloid, which is believed to activate dormant enzymes and support healthy cell function. This has further lead to the miraculous cures claimed by some people but Morinda Fruit does have benefits that are beyond dispute. Morinda Fruit is an excellent source of beneficial acids, Vitamin C and alkaloids. The fruit is taken for lumbago, asthma and dysentery. The bark of the Morinda produces a reddish purple and brown dye used in making batik. Botanical Name : Morinda citrifolia Common Name : Morinda, Indian Mulberry Part Used : Fruits, Leaves & Roots Habitat : Grows wild and cultivated. SVM EXPORTS Moringa Seed, SVM EXPORTS Moringa Leaf, SVM EXPORTS Moringa Leaf Powder, SVM EXPORTS Moringa Tea Cut Leaf, SVM EXPORTS Moringa Seed Oil, SVM EXPORTS Moringa Oil Cake, SVM EXPORTS Bacopa Monnieri, SVM EXPORTS Centella Asiatica, SVM EXPORTS Hibiscus Rosa Sinensis, SVM EXPORTS Papaya Leaves, SVM EXPORTS Vinca Rosea, SVM EXPORTS Mollugo Cerviana, SVM EXPORTS Cissus Quadrangularis, SVM EXPORTS Azadirachta Indica,

Minimum Order: 25

Product Description: The Brick Plant Machine is an automatic brick making plant designed to produce solid or hollow bricks with a capacity of up to 600,000 bricks per day. While all machine choose should follow the capacity requirements of customers. If one day 100000 bricks is required, then smaller machine, and hoffman kiln or the smaller tunnel kiln is advised. For the kiln, we have Hoffman kiln, drying chamber, masonry tunnel kiln, prefabricated tunnel kiln and rotary kiln for differnet investment condition. Normally, we advise customers to prepare the land at the area of around 30000M2. Of course, the biger land can provide more space for the storage of the finished bricks and raw materails. Auto brick making machines can be divided into the material feeding machine, crushing machine, mixing machine, extruding machine, cutting machine, and stacking machine etc.Kiln can be Hoffman, tunnel kiln, rotary kiln, while we recommand the rotary kiln which is most widly used in China at presnet. Finished bricks can be solid clay bricks, hollow clay bricks, thermal blocks, etc. Halstec, give you the best design for the Brick Plant Machine with a complete brick production solution. It is designed to provide high efficiency, low energy consumption, and cost-effectiveness. With its advanced technology and reliable performance, this automatic brick manufacturing plant can be used for a wide variety of applications.

Transparent and bright, adding a unique decoration to your space. Not only beautiful but also practical. Blue-violet ripple crystal hot melt tile is a kind of decorative building material, mainly made of crystal tiles with wave-like texture, the color is mainly blue-violet, fixed by hot melt technology. It features an obvious wavy texture on the surface and is colorful. It can be used in indoor or outdoor walls, floors and ceilings to create a unique artistic effect, and is a very fashionable building decoration material.

JQHV Filter Co., Ltd. is a modern enterprise that mainly produces and sells excavator filter elements, construction machinery filter elements, excavator universal accessories and so on. The company mainly produces and sells brands such as Hitachi, Komatsu, Hyundai, Carter, , Kobelco, Sumitomo, Kato and other imported and domestic excavators' air filters, oil filters, oil-water separators, air-conditioning filters and various special- shaped filters. Companies adhering to the' integrity, professionalism, win-win' business philosophy, to provide you with excellent prices and high-quality excavator filter elements and accessories, for a long time, our company has been making continuous efforts to create an orderly and fair market atmosphere. In today's fierce competition in the domestic construction machinery market, we should grasp the pulse of the market, seize the opportunity, adhere to the business philosophy that quality is a product that competitors or price-cutters can't destroy, create new service standards in the industry through first-class service and high-quality and high-priced products, and implement them through a strictly prohibited management system. JQHV FILTER welcomes new and old customers at home and abroad to visit and guide, cooperate sincerely and create prosperity together!

UNIAXIAL-GEOGRID PRDOUCTS-TENSILE STRENGTH 100-200 MPA,GOOD QUALITY AND GOOD PRICE. Uniaxial geogrid is a type of geogrid made from a single, linear network of polyester or polymers. It is designed to reinforce soil when stretched lengthwise along the sheet. This geogrid is commonly used in civil engineering applications such as reinforcing roads, walls, and embankments. Uniaxial-geogrid has a high tensile strength and modulus( the ratio of stress to strain in a material under stress). Its tensile strength is 100-200 MPa, providing soil with an interlocking system for force bearing and diffusion. Structure and functions: Uniaxial geogrids are popularly made of high-density polyethylene (HDPE) with oblong hole meshes that are stretched and pressed into thin sheets. When laid in the soil, their interlocking effect creates an efficient stress transfer mechanism, allowing local loads to spread quickly and effectively over a larger area, reducing local damage stress and prolonging the project's service life.

Bi-axial Geogrids can be made from materials including plastic, polyester and fiber-glass by way of weaving, knitting, extruding or other method. Biaxial geogrid features equal strength in both longitudinal and transverse directions, creating an interlocking system that can effectively bear and diffuse forces throughout the soil. Biaxial geogrids are designed to spread loads over a large area, reducing excavation needs and providing an economical design. Their ribs interlock with the surrounding soil particles, increasing bearing capacity and reducing time and cost associated with placement and construction. Biaxial geogrids ribs thickness and unit weight Biaxial geogrids rib thickness (1mm) , 150g/m² Biaxial geogrids rib thickness (1.5mm) , 230g/m² Biaxial geogrids rib thicknesses (2mm) , 300g/m² Biaxial geogrids rib thicknesses (2.5mm), 350g/m² (The above is the estimated value, the tolerance is 1-2g/sqm) Application Biaxial geogrid provides a long-term resistance to deformation and enhances the bearing capacity of road and ground foundations, extending their service life, it is used to: 1, prevent caving in or cracks in the road or ground surfaces and keeps them looking neat and tidy. 2, stop culverts from cracking. 3, improve soil slope stability and prevents soil erosion. 4, reduce the required thickness of bedding layers, saving costs. 5, support slope vegetation mesh mats to green the environment. 6. replace metal mesh for coal mine shafts.

Steel plastic geogrids are composite geogrid materials with a steel wire wrapped within the HDPE (high-density polyethylene) mesh strips. Steel plastic geogrids feature high strength, low elongation, excellent corrosion resistance and anti-aging. Process: The steel-plastic composite geogrid is composed of high-tensile steel wires with polyethylene (PE) or other components, extruded to form high-strength, anti-pull strips with embossed surfaces and coating. Steel Plastic Geogrid Size: 3.95*5 Color: Black Width: 1-6m Length: 50-100m Tensile strength:20kn,30kn,50kn,80kn-200kN/m Material: HDPE,carbon steel wire Application: Expressway, railway, soft soil subgrade, retaining wall

POLYESTER GEOGRID-BIAXIAL POLYESTER(PET) GEO-GRIDS, UNIAXIAL PET GEOGRID, WARP KNITTED PVC COATED PET GEOTEXTILE Polyester geogrid, simplified as PET Geogrid, is manufactured from high molecular polyester multifilament yarns by warp knitting / weaving and coated with PVC. Polyester biaxial geogrid is mainly used for civil engineering such as highway, railway, hill side slope treatment, structural layers for construction and products for water conservancy projects. Using Method: 1. The paving surface for geogrids should be relatively flat. After the paving layer is accepted, longitudinal skewing should be prevented by first drawing a white line or hanging line according to the width of the geogrids in the paving layer, then beginning with paving. U-shaped nails should then be used to fix the end of the grating (4 nails per meter wide, with uniform distance). 2. After fixing the end of the geogrids, a laying machine or manual method should be used to slowly pull the grille forward to lay. Every 10 meters should be manually inspected and straightened once until a full section of the grille is finished before laying the next section; this process should be repeated. 3. Successive paving: Geogrid roll length should be used as a unit for paving section length. After paving a section of geogrids or river bank section, an overall inspection of the quality of paving should be conducted before proceeding to paving the next section. Uniaxial PET Geogrid with HDPE Coating We provide polyester geo-grid as primary reinforcement with HDPE coating for a design life of 120 years at 30°C. Geogrid Uniaxial PET with low density polyethylene sheath and ultimate tensile strength of 200kN/m. It offers ultimate tensile strength for reinforcement in flexible retaining wall etc. Polyester Biaxial Geogrids Polyester biaxial geogrids are characterized by high tensile strength, small fracture elongation, and a low creep coefficient. The temperature resistance range is -70 degrees Celsius to 180 degrees Celsius, and the geogrid is also resistant to UV radiation and microbial corrosion. The width can reach up to 6m, resulting in high tensile strength at low strain capacity. Longitudinal and transverse ribs work together to fully utilize the geogrid's embedded locking effect on the soil body. During production, the polyester geogrid is pressed with a rough pattern to enhance the roughness of the surface and improve the friction coefficient between the geogrid and the synthetic soil body. Polyester geogrids are not eroded by acid, alkali, salt solutions, and oil at room temperature, do not dissolve in water or succumb to microbial attack, and can withstand UV light and oxygen erosion. Furthermore, the junction will not crack or break due to the synergistic force of the longitudinal and transverse ribs. In actual engineering, after compaction of the filler, it meets permanent engineering construction needs.

Fiberglass geogrid is an excellent geosynthetic material for asphalt pavement reinforcement and road base strengthening. This type of goegrid is a semi-rigid mesh product with high tensile strength and low elongation in both warp and weft directions, and it has excellent properties such as high temperature resistance and aging resistance. It is widely used for asphalt pavement, cement pavement and road base reinforcement, railroad road base, dam slope protection, airport runway, sand control, and other engineering projects. This allows it to be used, and rutting, which ultimately solves the issue of asphalt pavement being difficult to strengthen. Fiberglass geogrid to use in paving overlay to strengthen road surfaces, resist cracks Specification: Fiber glass geogrid,100 kN/m,300 C fusion point Fiberglass grogrid is laid over concrete roadway crack, then over lay with 2 to 3 inches of asphalt. Fiberglass geogrid-4x4mm or 5x5mm geogrid fiberglass fabric without adhesive to put into an epoxy matrix. Fiberglass Geogrid Mattress for construction project in a bituminous concrete parking area Customized specifications 1) Fiberglass Geogrid with asphalt coated 40kn x 40kn 2)Fiberglass Biaxial Geogrid of min. 80 KN.m tensile strength, used as a reinforcement layer in asphalt road pavement. 3)Fibra de vidrio Geogrid/tela del geotextil, geogrid fiber glass mat with asphalt. 4)Fiber glass geogrid with tensile strength ≥ 50 kn for use in Panama.

Polypropylene geogrid is a high-strength reinforced geosynthetic material made of polypropylene (PP), extruded, stretched in one or two directions, or ultrasonically welded. It has a tensile strength of up to 50kN/m. It's usually 3m-6m wide and 50m long. Mainly two types according to construction: polypropylene PP biaxial-geogrids, PP uniaxial-geogrid. Polypropylene geogrids have many advantages, including high strength, a stable structure, anti-aging, and corrosion resistance. It is mainly used in highways, railroads, slope protection, large landfills, and other soft soil engineering reinforcement, enhancing the bearing capacity of the soft soil foundation, preventing surface cracking, collapse, and providing easy construction and reduced maintenance costs. It can also be commonly used as double-tensioned plastic mesh mine roof for underground coal mines and polypropylene PP geogrid as fire retardant safety nets for protection. PP geogrid Color:Black or Customer's Request Tensile strength: 15KN-50KN Raw Material: Polypropylene Plastic Mesh Size: 33*33mm 39*39mm 65*65mm Usage: Soil Reinforcement Length:50-100m/roll Width-Unia , xial:1-2.5-3m Width-Biaxial:3-6m PP Biaxial Geogrid: Roll size: 3.95m by 50m or 5.90m by 50m or customized. PP-biaxial warp-knitted geogrid reinforcement for railroad and soft ground Polypropylene (PP) Geogrid specifications for Railways: Material Polypropylene (PP): Ultimate tensile Strength:20Kn/m (min) Material Polypropylene (PP): Ultimate tensile Strength:30Kn/m (min) Square hole pp mesh geogrids 30mm square hole PP Geogrid, mesh thickness app. 3 mm Packaging 4mtr x 200mtr on roll Colour: Black Bi-Axial Geogrid material for our project in Oman. Material: Bi-axial oriented PP geo-grid Tensile Strength: 20 kN/m Mesh size: 40x40 mm Width: 2 m Thickness: 1 mm Multi axial PP Geogrid Rolls Tensile strength: 15-50kN/m Width: 2/3.95/5.9m Length:50/100m Package: Rolls

Free shipping!!! EPA/EURO 5 Chinese mini excavator 2ton 1ton 1.7 ton excavator cabin mini digger Jianggong Mini Excavator · Beautiful appearance,high configuration,superior performance,low fuel consumption,wide operating range. · Multipurpose: losingsoil of vegetable greenhouse,campus greening of municipal departments,digging the hole for tree planting of Fruit-land Nurseries concrete pavement crushing,sand-gravel material mixing, construction work in the narrow place etc... · It can reduce maintenance and operating costs liberate the workforce. Improve the mechanization, Iow investment,high return.

Improved MgO Board 1. Introduction With new materials and technologies, Improved Kam Chung magnesium oxide board has better performance and avoids the defects of traditional MgO board. We use an alkali-resisting glass fiber net to increase product strength, and new technologies to prevent the “crying” phenomenon. In that case, our products can be used in humid area and no need to worry about quality problem. 2. Application Kam Chung Magnesia board is light in weight, resistant to fire, high in strength, good against moisture, thus suitable for a wide range of general building uses, such as ceiling, wall board and flooring for residential complex, hospital, school, workshop, warehouse, stadium or even furniture and billboard. 3. Specifications Size (mm) 2440*1220 Thickness (mm) 3 – 20 Moisture content (%) ≤8 Density (g/cm3) 0.6-1.4 Wet Expansion Rate(%) 0.6 Thermal Conductivity (W/m•K) ≤0.30 Bending Strength(MPa) ≥10 Shock Resistance (Kj/㎡) 2 Dry Shrinkage Rate (%) 0.3 Nail-holding Ability (N/mm) ≥25 Content of Chloridion (%) ≤10 Non- combustibility GB 8624-2006 Class A Impermeability No water drops on the other side 4. Advantages (1). Durable (2). Fire rated (3). Insect-free (4). Waterproof (5). Light weight (6). Energy efficient (7). Impact resistant (8). Easy installation (9). Environment -friendly 5. Installation Processes for Suspended Floor (1).Draw lines on walls and paint anti-rust paint on channels. (2).Make channels on walls and fasten steel channels by following procedures. A. Make a 2cm deep channel at horizontal line of walls and get rid of the putty until you see the steels inside. B. Clean up putty and dust, and weld keels directly to the steels inside walls so as to make the whole floor system strong. C. The width of channels should be same as that of channel steels. Sink the channel steels into the channels and fasten them by screws and then weld them together. The whole system would be integrated with walls by that. D. It is better to apply more screws to fasten channel steels with wall steels. (3). installation of I-beam Because that we use both size 12 I-beams and channel steels, we need to cut both ends of I-beams so as to fix them into channel steels and weld them together. Distance between each I-channel is about 60cm. (4). Weld angle steels and sub channels and paint the whole system with waterproof paint. Distance between sub channels is 60cm. (5). Welding slags must be cleaned up and welding joints be polished before installation of MgO boards. Boards should be vertically parallel to main beam. Any edge of boards must not be suspended and distance between boards can be 3- 5mm. Joint points of boards must be on the center of beams. (6). Length of self-tapping nails can be 55-60mm (subject to thickness of boards and beams). First drill holes and then nail them in. Hole size must be bigger than that of nail head, and nail head must be sunk into a board. Nailing sequence is from center to sides. Distance between board edges and nails close to edges is about 20mm. Distance between nails around board center is about 600mm, and that between nails near board edges is about 300mm. Nailing should be done when the general layout is finished. (7). During installation, operator should leave 3-5mm gap between boards and walls (less distance for wooden floor). Gaps can be covered by silicone sealant or elastic putty.

Minimum Order: 666

We are SINCERELY looking for agents of fiber cement board, calcium silicate board and gypsum board around the world. We will provide you good price and good quality products and together seize the market. Win-win and long-term cooperation is our motto. If you share the same idea; if you are not satisfied with present supplier; if you had a bad cooperation experience; if you are not happy with the present offer, or if you are struggling with local market or competitor, we are the one you should contact with.

Minimum Order: 666

Gypsum board Main Features 1.Environmental friendly, no asbestos 2.Non-combustible 3.Strong nail holding power 4.Heat & sound insulation 5.Smoothness ceiling board 6.Light weight in unit acreage Application: ceiling, wall panel etc Varieties: Normal paper-faced gypsum board Fire-rated gypsum board Moisture-proof gypsum board Size: 1200*2400mm; 1220*2440mm; thickness: 7-15mm Lead time: 7-15 days Characteristics Item Standard Value Test Value Density (kg/m2) - Thickness Regular Fire Resistant Water Resistant <9.5kg/m2 9.5mm 7.5 7.5 9.2 <12kg/m2 12mm 9.5 9.5 11.5 Flexural Strength(N) Parallel >360 9.5mm 560 >500 12mm 700 Cross >140 9.5mm 180 >180 12mm 240 Surface Paper Sticking the Core Material Unexposed Unexposed Stability (min) Fire Resistant >20 / / >20 / Water Absorption (%) Water Resistant 10 9.5mm / / 6.8 12mm / / 4.2 Radioactivity Internal IRa≤1.0 <0.1 External Ir≤1.3 <0.1 Note Executive Standard:GB/T 9775-2008

Minimum Order: 666