Construction Adhesives

Hydroxyethyl Methyl Cellulose CAS:9032-42-2 Hydroxyethyl Methyl Cellulose (MHEC) is also named as Methyl Hydroxyethyl Cellulose (HEMC),used as high efficient water retention agent, stabilizer, adhesives and film-forming agent in kinds of building materials.is widely used in industrial applications ,such as construction, detergent ,paint and coating ,we also can provide HEMC according to customers requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc. Typical properties Appearance White to off-white powder Particle size 98% through 100 mesh Moisture (%) ≤5.0 PH value 5.0-8.0 Specification        , Typical grade Viscosity (NDJ, mPa.s, 2%) Viscosity (Brookfield, mPa.s, 2%) MHEC MH60M 48000-72000 24000-36000 MHEC MH100M 80000-120000 4000-55000 MHEC MH150M 120000-180000 55000-65000 MHEC MH200M 160000-240000 Min70000 MHEC MH60MS 48000-72000 24000-36000 MHEC MH100MS 80000-120000 40000-55000 MHEC MH150MS 120000-180000 55000-65000 MHEC MH200MS 160000-240000 Min70000 Application Applications Property Recommend grade External wall insulation mortar Cement plaster mortar Self-leveling Dry-mix mortar Plasters Thickening Forming and curing Water-binding, adhesion  Delay open-time, good flowing Thickening, Water-binding MHEC MH200M MHEC MH150M MHEC MH100M MHEC MH60M MHEC MH40M Wallpaper adhesives  latex adhesives  Plywood adhesives Thickening and lubricity Thickening and water-binding Thickening and solids holdout MHEC MH100M MHEC MH60M Detergent Thickening MHEC MH150MS Packaging: MHEC/HEMC Product is packed in three layer paper bag with inner polyethylene bag reinforced , net weight is 25kg per bag. Storage: Keep it in cool dry warehouse,away from moisture, sun,fire,rain. KIMA CHEMICAL CO.,LTD www.kimachemical.com

Minimum Order: 1 bags

Hydroxypropyl Methyl Cellulose CAS:9004-65-3 Hydroxypropy , l Methyl Cellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic,detergent,paints,as thickener, emulsifier, film- former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc. Appearance White or off-white powder Methoxy ( % ) 19.0~ 24.0 Hydroxypropoxy ( % ) 4.0 ~ 12.0 pH 5.0~ 7.5 Moisture ( % ) ≤ 5.0 Residue on ignition ( % ) ≤ 5.0 Gelling temperature ( ℃ ) 70~ 90 Particle size min.99% pass through 100 mesh Typical grade Viscosity (NDJ, mPa.s, 2%) Viscosity (Brookfield, mPa.s, 2%) HPMC MP400 320-480 320-480 HPMC MP60M 48000-72000 24000-36000 HPMC MP100M 80000-120000 40000-55000 HPMC MP150M 120000-180000 55000-65000 HPMC MP200M 160000-240000 Min70000 HPMC MP60MS 48000-72000 24000-36000 HPMC MP100MS 80000-120000 40000-55000 HPMC MP150MS 120000-180000 55000-65000 HPMC MP200MS 160000-240000 Min70000   , Typical Applications: Tile Adhesive •Good water retention: prolonged opening time will make tiling more efficient. •Improved adhesion and sliding resistance: especially for heavy tiles. •Better workability: lubricity and plasticity of plaster is ensured, mortar can be applied easier and quicker. Cement Plaster / Dry mix mortar •Easy dry mix formula due to cold water solubility: lump formation can be easily avoided, ideal for heavy tiles. •Good water retention: prevention of fluid loss to the substrates, the appropriate water content is kept in mixture which guarantees longer concreting time. •Increased water demand: increased open time, expanded spry area and more economical formulation. •Easier spreading and improved sagging resistance due to improved consistency. Wall putty •Water retention: maximized water content in slurry. •Anti-sagging: when spreading a thicker coat corrugation can be avoided. •Increased mortar yield: depending on the weight of the dry mixture and appropriate formulation ,HPMC can increase the mortar volume. Exterior Insulation and Finish System ( EIFS ) •Improved adhesion. •Good wetting ability for EPS board and substrate. •Reduced air entrancement and water uptake. Self-leveling •Protection from water exudation and material sedimentation. •No effect on slurry fluidity with low viscosity HPMC, while its water retention characteristics improve the finish performance on the surface. Crack Filler ·Better workability: proper thickness and plasticity. ·Water retention ensures prolonged work time. ·Sag resistance: improved mortar bonding ability. Pharmace , utical excipient and food application： Usage Product grade Dosage Bulk Laxative 75K4000,75K100000 3-30% Creams, Gels 60E4000,65F4000,75F4000 1-5% Ophthalmic Preparation 60E4000 01.-0.5% Eye drops preparations 60E4000, 65F4000, 75K4000 0.1-0.5% Suspending agent 60E4000, 75K4000 1-2% Antacids 60E4000, 75K4000 1-2% Tablets binder 60E5, 60E15 0.5-5% Convention Wet Granulation 60E5, 60E15 2-6% Tablet coatings 60E5, 60E15 0.5-5% Controlled Release Matrix 75K100000,75K15000 20-55% Packaging: HPMC Product is packed in three layer paper bag with inner polyethylene bag reinforced , net weight is 25kg per bag. Storage: Keep it in cool dry warehouse,away from moisture, sun,fire,rain. KIMA CHEMICAL CO.,LTD www.kimachemical.com

Minimum Order: 1 bags

TITANSUHE produces slings and rigging that are to be used with lifting equipment or crane for positioning, lifting, and transferring large loads. These sling lift and rigging can be categorized into three general types according to their construction and materials: chain slings, polyester slings, and wire rope slings. Sling lifting straps are more used for short-length material handling or road rescues. Polyester slings are widely used in applications that need soft touch and protection to the load's surface. Wire rope slings can be engineered with extremely long lengths, suitable for long- distance material and equipment handling such as bridge and building constructions. Lifting Slings Types for Sale Polyester Slings Webbing Slings and round slings are usually used to lift loads that need protection from damage. These polyester webbing slings are specially designed to carry heavy loads and lift them safely. It's very strong yet lightweight, and its flexibility reduces shock when loading. They come out with bright colors and easily to identify their capacity on body. Chain Sling The chain sling is a very sturdy chain hook tool. Rigging lifting straps are available with grade 100 or grade 80 chain that combined with different accessories to form one, two, three or four chain legs. Hooks with different ends and chain lengths are used for various construction or industrial sites. Wire Rope Sling Wire ropes are often made into different forms of slings for the lifting industry due to their high strength, durability and wear resistance. Why Choose Titansuhe be your lifting slings suppliers? Each chain links and chain components are tempered and quenched to get high strength and abrasion resistance for overhead lifting.To make chains fit properly with hooks or hoists also get each link calibrated before delivery. G80 chain can be used in any rigging application that requires a 30-80 grade chain. To identify class 80 slings and lifting chains, all chains are marked with embossed G80 on body. This do good for your checking during usage. The chain components are also completed through a rigorous inspection process and testing procedure to ensure that the end user gets a quality chain sling. Safe Use of Hoists and Slings Determine the load weight and be sure it’s within the rated capacity of the sling. Chose rigging slings that have suitable characteristics for the type of load, hitch and environment. Never use lifting slings exceeding its rated capacity. When using 2 leg or multi-leg slings, the load angle will affect the rated load. See load chart below. Lifting slings with fittings which are used as a choker hitch shall be of sufficient length to assure that the choking action is on the slings and never on a fitting. When using lifting slings in a basket hitch, be attention to balance the load and prevent slipping. Be sure the fittings have proper shape and size of the opening that can seat properly in the hook or other attachments. Keep rigging slings away from the sharp corners, sharp edges that may cut or damage the slings, protrusions or abrasive surfaces. Do not drag slings on the floor or over an abrasive surface. Do not twist or tie slings into knots or join slings by knotting. Do not pull slings from under loads if the load is resting on the sling. Do not drop slings equipped with metal fittings. Do not use slings that have damages or defect unless it is inspected and accepted by qualified person. When use slings in hitched, it should be able to control the load. Always stand clear from between the sling and the load, and from between the sling and the crane hook or hoist hook. Always keep personnel away from the suspended load. Do not allowed personnel ride the sling. Do not shock loading. Do not twist and kink the sling legs. Always center the load in the hook bowl to prevent point loading on the hook. During lifting, with or without the load, personnel shall be alert for possible snagging. When using slings a basket hitch, always contain and support the load from the sides above the gravity center. Always pay attention to the angle of the legs and select slings with enough length to provide adequate rated capacity. Place blocks under load prior to setting down the load, to allow removal of the slings, if applicable. Do not use Nylon or duplex polyester webbing sling at temperatures above of 194 degrees F (90 degrees C). Do not expose the polyester slings under sunlight or ultra-violet light which will degrade the strength of the slings. Always keep slings in a dry, cool and dark place when not in use. In choker hitch, slings shall be long enough so that the choker lifting chokes onto the sling eye or body and never onto any fittings. Do not use slings at angles of less than 30 degrees from horizontal. Inspection Before Buy Lifting Slings A. Initial Inspection Before placing any new or repaired slings in service, always inspect the sling and be sure that the correct sling is being used, and the sling meets the requirements of this specification and has not been damaged in shipment. Failure to read, understand and follow the use and inspection instructions with each sling may result in severe personal injury or death B. Frequent Inspection Before each using, inspect the slings by a qualified person. C. Periodic Inspection Periodically inspect the slings by a designated personnel base on following information. 1. Sling using frequency 2. Sling service condition 3. Sling service life 4. Periodic inspections should be conducted at least monthly Angle and Load Chart of Lifting & Rigging Slings ANGLE is measured between a horizontal line and the sling leg or body. This angle is very important and can have a dramatic effect on the rated capacity of the sling. As illustrated, when this angle decreases, the load on each leg increases. This principle applies whether one sling is used to pull at an angle, in a basket hitch or for multi-legged bridle slings. This data is only for equally loaded sling legs. Sling angles of less than 30 degrees are not recommended. Sling Angle in Degrees Factor 90 1.000 85 0.996 80 0.985 75 0.966 70 0.94 65 0.906 60 0.866 55 0.819 50 0.766 45 0.707 40 0.643 35 0.574 30 0.500 Products Lifting Tools and Equipment  Chain Hoist  Wire Rope Hoist  Trolley & Clamps  Lifting Clamps  Lifting Jack  Lifting & Rigging Slings  Polyester Slings  Chain Sling  Wire Rope Sling  Wire Rope Winches  Material Handling Equipment  Rigging Equipment  Tools & Hardware  Elevator  Removal Lifting & Rigging Slings From Service Removed slings from service if any of the following are visible: Sling tag information is missing or not readable. Acid or alkalis burns. Melting, charring or weld spatter of any part of the sling. Holes, tears, cuts, snags or embedded particles. Broken or worn stitching in load bearing splices. Excessive abrasive wear. Knots in any part of the sling. Distortion, excessive pitting,corrosion or broken fittings. Any conditions which cause doubt as to the strength of the sling. Metal Fittings that are cracked, deformed, including melting or charring. Hooks with throat openings increased by more than 15 percent or twisted out of plane more than 10 degrees. If you need any kinds of lifting products, please contact us, as one of the most professional lifting equipment manufacturers, TITANSUHE is willing to offer you high quality products.

Minimum Order: 1 bags

Chlorinated Polyethylene Membrane for High Speed Rail The chlorinated polyethylene waterproofing membrane is a colorful elastic waterproof material made of chlorinated polyethylene resin as the base material. Product Description The chlorinated polyethylene waterproofing membrane(CPE waterproof membrane) is a colorful elastic waterproof material made of chlorinated polyethylene resin as the base material, mixed with chemical additives and fillers, and processed by plastic refining, hot compounding, calendering, crimping, and other processes. The product divides into N class homogeneous and L class fiber conforming. The main material of chlorinated polyethylene, no double bond in its macromolecular structure, has good aging resistance, oil resistance, and chemical resistance;blending with rubber, high elasticity, high elongation, and good low-temperature resistance, and has strong adaptability to foundation settlement and concrete shrinkage joints. From this aspect, chlorinated polyethylene rubber blended waterproofing membrane has the dual characteristics of chlorinated polyethylene and rubber, is a better waterproof membrane for high speed rail.   Features of Waterproof Membrane for High Speed Rail: 1. High tensile strength, strong seepage resistance, good low-temperature flexibility, small expansion coefficient, strong adaptability to deformation, big coefficient of friction, can be used with a variety of adhesives, good bonding effect; 2. Aging resistance, long service life; 3. It can directly construct on freshly cast concrete, which can effectively shorten the construction period and save the construction cost.   Cautions: ①Configured paint should use up within 20 mins, with the allocation. ②Rainy days, snowy days, more than five winds, the temperature is higher than 35 ℃ or lower than 5 ℃ is not suitable for construction. ③Pay attention to ventilation when storing and transporting, avoid direct sunlight, and prohibit direct contact with acid, alkali, oil, and chemical solvent. Place in a cool and dry place, suitable temperature -15℃~35℃. The storage period is 12 months.   Construction Method: ①Preparation: clean up the oil, slick, cement slag, loose layer, etc. On the base surface, treat and repair the unevenness; do waterproofing reinforcement layer on specific parts first before large area construction. ②Construction: paste waterproofing materials with polyurethane or cement-based adhesive. Side painting binder while paving waterproofing materials, while scraping board in the upper part of the coil back and forth scraping solid, forbidden to have bulging, blistering and other phenomena, polyurethane waterproofing coating or cementitious adhesive for sealing. Get a free quotation about waterproof membrane for high speed rail

Polyvinyl Chloride (PVC) Waterproofing Membrane (Non-Reinforced) PVC is suitable for waterproofing and moisture-proof to tunnels, subways, and underground projects, waterproofing, and seepage-proof to water pools, water storage tanks, and sewage treatment tanks. ATTRIBUTE Reinforced:Non-Reinforced Color:Gray Raw materials:Asphalt Usage Environment:Flexible Applications:Roofing,Tunne , ls & Subway PRODUCT DESCRIPTION: PVC waterproofing membrane is a waterproof material made of PVC resin as the main raw material, mixed with appropriate amount of modifiers, antioxidants, ultraviolet absorbers, coloring agents and other additives, mixed, plasticized, extruded, calendered, cooled and packaged. Classification by the presence or absence of composite layer: no composite layer for the N class, with fiber in line with the L class; according to the physical and chemical properties are divided into typeⅠ and typeⅡ. The membrane is a polymer membrane formed by combining a double-sided PVC plastic layer and a polyester reinforcement in the middle through a specific extrusion coating process, using polyester fabric as reinforcement. The combination of the advanced polyvinyl chloride plastic layer and the mesh structure of the polyester fabric gives the membrane good dimensional stability and a low coefficient of thermal expansion. Enhances the long-term performance of the coil when exposed directly to the natural environment.Get a qoutation.   Product Characteristics: 1. PVC waterproofing roll-roofing material has high tensile strength, good elongation, small thermal dimensional change rate. 2. PVC has good weldability, the seam hot air welding, and the parent material into one. 3. PVC has well water vapor diffusion, condensate easy to discharge, stay to the grass-roots level of moisture, moisture easy to discharge. 4. Resistant to aging, ultraviolet radiation, chemical corrosion, and root penetration. 5. Low temperature (-20 ℃) has good flexibility. 6. Long service life (25 years for roofing, more than 50 years for underground), and no environmental pollution. 7. The surface reflects ultraviolet radiation, PVC waterproofing roll-roofing surface absorbs less heat, and the temperature is low. 8. Has good flexibility and stretchability, high tensile strength, well dimensional stability, high mechanical strength, erosion resistance, root penetration resistance, weathering and UV resistance, and hail resistance. If you have any question on PVC Waterproofing Membrane, please contact us.

One Component Polyurethane Waterproof Coating Good waterproofing performance, room temperature curing, waterproof layer without joints, high strength, elongation, strong adaptability to deformation of the waterproofing base, especially for complex engineering parts waterproofing effect. ATTRIBUTE Color:Gray Raw materials:Rubber and plastic Applications:Basement & Culvert,Tunnels & Subway Usage Environment:Flexible PRODUCT DESCRIPTION:  Construction temperature: 5-40℃ Quality guarantee period: 6 months Reference dosage: 2.0~3.0kg/m²   Product Description: Polyurethane waterproof coating is formed by the polymerization reaction of isocyanate, polyether, and other prepolymer-containing isocyanate groups, with catalysts, anhydrous additives, anhydrous fillers, solvents, etc., by mixing and other processes made of one-component polyurethane waterproof coating. The coating is reaction-curing (moisture-curing) coating, with high strength, elongation, good water resistance, and other characteristics. Strong adaptability to grass-roots deformation. Polyurethane waterproof coating is a liquid construction of one-component environmentally friendly waterproof coating, is imported polyurethane pre- polymer as the basic ingredients, with no tar and asphalt, and other additives. It is air moisture contact after curing, in the grass-roots surface to form a layer of solid tough no joints overall anti-film. Custom your waterproof solution.   Features:  1.Easy to use, paint in portions on the grass-roots level, and form a complete waterproof film. 2.Good resistance to high and low temperatures, watertight, airtight. 3.Does not contain coal tar, petroleum asphalt, other substances, stable performance. 4.Not contain any solvent, has non-toxic and tasteless coating film after curing, stable performance of coating film during use. 5.Good homogeneity of the coating, no delamination, precipitation phenomenon. 6.High bonding strength, good adhesion to concrete, wood, metal, ceramics, other materials, easy to repair.   Advantages: Long term durability and wear-resistant UV and weather-resistant Resistant to alkaline cleaners, battery acid and fuels Resistance to corrosion Impermeability Resistant to root penetration   Construction Method: 1. Require a firm base, no floating slurry, oil stain, etc. 2. Can be scraped or rolled construction, the next layer and the previous layer of painting direction perpendicular.   Cautions: 1. Storage: It should be stored in a cool and ventilated room, and the indoor temperature should not exceed 40℃. Under normal storage and transportation conditions, the shelf life is six months from the date of production. 2. Transportation: transport as general cargo, avoid sun and rain.Get a free quotation.

Waterproof Butyl Tape Butyl waterproof tape is completely solvent-free, so it does not shrink and emit toxic gases. Because it is not cured for life, it has good followability to thermal expansion and contraction and mechanical deformation of the adhered surface, and is an extremely advanced waterproof sealing material. ATTRIBUTE Color:White Raw materials:Rubber and plastic Usage Environment:Flexible Applications:Commercial buildings PRODUCT DESCRIPTION:  Butyl rubber as the main raw material, with other additives, through advanced technology processing made of a lifelong non-curing type of self-adhesive waterproof sealing tape, it has a strong adhesion to a variety of materials on the surface, while having good weather resistance, aging resistance and waterproof, and the surface of the object to play a sealing, shock absorption, protection and other roles. The product is solvent-free, so it does not shrink and emit toxic gases. Because it is not a cure for life, with good followability to thermal expansion and contraction and mechanical deformation of the adhered surface and is an advanced waterproof sealing material. Dayuwang is one of the most professional butyl tape manufacturers and suppliers, if you are interested in our butyl waterproof tape,please feel free to contact us.   Features: 1.Not cured for life, can maintain permanent flexibility, and can withstand a certain degree of displacement. 2.Good waterproof sealing and chemical resistance, strong resistance to ultraviolet light (sunlight), up to more than 20 years of service life. 3.Easy to use, accurate dosage.Easily applied, instant adhesion to most substrates & long life durability with no leaching. 4.Waterproofing in wet rooms, bathrooms, balconies & window areas. 5.Compatible with most tile adhesives & texture coating systems.   Product Specifications: Item Unit Detection value Basic composition Single-component butyl rubber Heat resistance 90℃, 2h without flowing Low temperature flexibility -40℃ no crack Adhesion holding force Steel ball 13.5 Elongation % 420 Recovery rate % 75 Moisture permeability g/m 24hr 0 Density g/cm 1.35±0.05 Peel strength Aluminum plate /cm 33.9 Color steel plate /cm 35.5 Cement mortar board /cm 38.6 Copper plate /cm 34.1 Glass board /cm 37.3   Cautions 1.In addition to low-temperature flexibility, the above performance testing conditions are 23℃. 2.Please remove water, oil, dust, and other dirt from the surface of the sticky sheet before use. 3.The tape should be stored in a dry and cool place, away from heat sources, direct sunlight, or rain. 4.The product is a self-adhesive material, amd once pasted in place will achieve the best waterproof effect. Get a quote.

Ethylene vinyl acetate sheets bitumen roof sheets EVA, ECB, and PE waterproofing membrane is ethylene-vinyl acetate copolymer, ethylene-vinyl acetate, asphalt co-polymer, and polyethylene as the base material mixed with the right amount of auxiliaries, by mixing, plasticizing, extrusion, calendaring, cooling, packaging, and waterproof materials. ATTRIBUTE Surface:Smooth Surface Reinforced:Non-Reinforced Raw materials:Asphalt Usage Environment:Flexible Applications:High Speed Rail,Tunnels & Subway PRODUCT DESCRIPTION Bitumen, also known as asphalt, is a sticky, black and highly viscous liquid or semi-solid form of petroleum. Thanks to its waterproofing qualities, it is widely used in construction. Bituminous Waterproof Membrane are perfect for waterproofing roofs, basements, below-ground structures, bridges and other structures.   Product Characteristics 1. EVA waterproofing membrane has outstanding softness, construction operability, and good waterproofing effect due to its tensile strength, tear strength, and small relative density. ①Good organic chemical reliability, corrosion resistance to strong acids and alkalis and salt solutions, and good insulation characteristics. ②Good flexibility, ductility and light transmittance, easy for the actual operation of engineering construction. ③High quality impact resistance, high tensile strength and good anti-aging properties. ④High quality barrier characteristics to gas and environmental humidity, and is a relatively highly impermeable raw material. 2. ECB waterproof board tensile strength, elongation, good puncture resistance, in a complex environment with vibration, distortion can also achieve a good waterproofing effect. 3. PE waterproof board has good toughness and good chemical resistance, anti- aging properties, not easy to corrode, and long service life..

Access to quotations Contact : Jessica (sales manager) Email : sales3@amikon.cn  Mobile/WhatsApp : 86-18030235311 WeChat : hu18030235311 Skype : jessica01235483 Product information Brand name : GE Country of origin : USA Available : In stock Main products : PLC/DCS/ESD/TSI FAQ Q: Do you have a warranty? A: Yes, We have 12 months warranty. Q: Is it 100% brand new? A: Yes. New and original. Q: What is the type of payment? Paypal? A: 100% T/T Payment in Advance. Q: Which country or area can be shipped? A: Worldwide. Q: How do you ship goods? A: By air (DHL/TNT/UPS/FedEx...) About Amikon (Reliable global supplier of industrial spare parts). Amikon Limited is a professional manufacturer of global famous brand modules and spare parts.Our main products are: Distributed control system (DCS), Programmable logic controller (PLC), large servo control system.The spare parts we sell are guaranteed for one year and are rigorously tested and certified. We are now a global manufacturer of industrial automation spare parts and components. Any question, contact Jessica freely. Mobilephone : 86-18030235311 Application field 1.DCS Control System of Power Plant 2.Manufacture of Intelligent Flat Tempering Furnace System 3.PLC programmable conveying control system 4.DCS Distributed Control System 5.Intelligent Fire Water Supply Control System 6.Computer control system for chemical liquid constant flow of chemical plant 7.Electrical Control System 8.Papermaking, printing and dyeing production line 9.Substation integrated automation control system More Products ABB DCS401-0125 REV:B.3 DCS400125A DC speed regulator ABB SDCS-FEX-425INT DCS800 SDCS-FEX-4a Excitation module ABB R2E250-RB06-XX 3ADT754033R0001 FAN ABB SDCS-BAB-F02 3ADT316400R0502 DCS550 Excitation module ABB SDCS-PIN-21 Driven DC speed regulator driver board ABB SDCS-PIN-205 DCS500 DCS600 driver board ABB SDCS-PIN-F01 DCS550 3ADT316300R1502 driver board ABB DCF803-0035 SDCS-FEX-4a DCS800 Excitation module ABB NDSC–02 Multi -transmission variable stream motherboard ABB SDCS-COM-81 DCS800 communication board ABB SDCS-FEX-2(A) Inspiring module output plug ABB SDCS-PIN-3A DCS400 DC speed regulator power board ABB DCS550 DCS800 DCS-CP-P V2.0 Universal panel ABB SDCS-CON-1 DCS500 DC speed regulator motherboard ABB SDCS-PIN-48 DC speed regulator trigger board ABB SDCS-AMC-DC-2 DCS600 TSU600 Transformer program card ABB DCS400-PAN-A(ACS400-PAN-A) Speed regulator panel

Minimum Order: 1 bags

The c3 complement trf blood test kit is used for in vitro quantitative determination of complement 3 in human serum samples, as an auxiliary diagnostic application. Testing Principle of C3 Diagnostic Test A certain amount of complement 3 in human serum meets the corresponding antibody (sheep anti-human complement 3 antibody) of the reagent in the liquid phase, and combines to form antigen-antibody complex, resulting in certain turbidity. This turbidity is proportional to the concentration of complement 3 in the sample in the presence of sufficient antibodies. After measuring the turbidity, the concentration of complement 3 in the sample serum can be obtained by comparing it with the standard serum. Basic Parameters of Complement 3 Test Specimen: serum Test time: 300 seconds Packing: 25 Tests/ Kit Box Size: 17*10*8cm Storage: 2-8℃ Shelf life: 1 year. What Does C3 Complement Test for C3 medical blood test is used for the quantitative determination of serum complement C3. The C3 in the serum and the specific C3 antibody in the reagent form an antigen-antibody complex to produce turbidity when performing the C3 diagnostic test. When a certain amount of antibody is present, the turbidity is proportional to the C3 in the serum. By measuring the absorbance value of a specific wavelength and referring to the calibration curve, the content of C3 in the serum can be calculated. That's what complement 3 test for. C3 Blood Test Meaning Here is the meaning of C3 antibody test. The dynamic changes of complement are getting more and more attention in clinic. The total complement and C3 in serum of patients with gastritis caused by antigen-antibody complexes decreased significantly. The decrease of serum complement in most patients with systemic lupus erythematosus is related to the deterioration of the disease. The serum levels of C1, C4, C2, and C3 in patients with active systemic lupus erythematosus are reduced, and serum complement levels return to normal when the condition is relieved. In infectious diseases, tissue damage and acute inflammation, C2, C3, and C4 all increase, and total complement activity is normal or elevated. But it is lower in the late period. The amount of complement in tumor patients is increased, especially in liver cancer, C3 is the most significant increase, which is of diagnostic significance. Hipro Biotechnology Corp is a professional POCT company, we provide immunoassay analyser, immunology analyzer, in vitro diagnostic solutions and etc. Want to know more?contact us.

Minimum Order: 1000

Complex geometries which cannot be obtained by CNC can be foamed in situ now. Cascell® MF foam core has been specifically designed for complex geometries parts, it can dramatically increase the use ratio of the foam and reduce the cycle time. Complex 3D-foam core parts can be obtained directly from the in- mold foaming process.

Minimum Order: 1000

A pyramidal prism/angular cube reflector is always used to reflect a beam of light into the prism, regardless of the direction of the beam. Corner prisms are widely used where accurate alignment is difficult. Corner optical prism rear reflector/pyramid prism, one of the precision optical products, is designed to reflect any light or beam entering the prism surface, regardless of the direction of the prism, can be reflected back to itself. The mirror can only be used at a normal Angle of incidence. Therefore, corner prism retroreflector is an ideal choice for accurate alignment. They have three total internal reflections that work even at very large incident angles. N - BK7 Corner Cube Retroreflectors is made by the precision of N - BK7, suitable for all kinds of visible light. Description Of Optical pyramid Tetrahedral Prism A tetrahedron prism, also known as a pyramidal prism, consists of four planes with different spatial directions. One of the four planes is the incidence/exit plane of light, and the other three planes with different spatial directions are the total reflection plane of light. For more information, please contact us BRD optical co. Ltd.

Minimum Order: 5 dozens

Besides wayfinding, interactive display technology also provides a fun and friendly way to interact with the guests. As a professional hotel TV wall mounts manufacturer, iWORKHUB helps the service providers to enrich the guest experience and elevate their brand image. Our hotel TV wall mount can be applied to various places, including stores, hotels, retails, airports and exhibitions. iWORKHUB is a professional TV brackets supplier that provides full mounting solutions for commercial panels, types of tv stands, LCD, LED video wall mounts, etc., and various customizations.

Minimum Order: 50

Hydroxypropyl Methyl Cellulose (HPMC) HPMC supplier HPMC supplier's product types include hydroxypropyl methylcellulose, HPMC and plant-based substitutes. Provide a variety of concentrations and specifications for private label applications, and also provide after-sales support services. EipponCell produce HPMC, and choose our products according to your concentration and weight of HPMC, food grade or industrial grade. We provide samples for free, contact us for samples, prices and delivery time! You can browse more about HPMC applications, please click here!