Construction Adhesives

HPMC(Hydroxypropyl methyl cellulose) Hydroxypropyl Methyl Celluloseare types of non-ionic cellulose ether, which are a powder of white to off white color, that function as a thickener, binder, film-former, surfactant, protective colloid, lubricant, emulsifier and suspension and water retention aid. In addition, there types of cellulose ethers exhibit properties of thermal gelation, metabolic inertness, enzyme resistance, low odor and taste, and PH stability. Due to the myriad of properties, HPMC is often used to substitute many other additives with lower concentration, making HPMC an incredibly efficient and effective additive in area of adhesives, construction, foods, household products, pharmaceuticals and etc.

Minimum Order: 5 dozens

Product Description Stone Paint Rock Pieces & Sand Wall Paint OEM For Nippon Natural sand as the main raw materials It is made of natural sand as the main ingredient and imported additives,color never fade.Using silicone-acrylic emulsion as the binder, using special rock chips and natural quarry as raw materials, without adding any color agents. Brushing Area:2 kilograms per square meter Name Imitation Stone Paint Main Raw Material Acrylic Usage Building Coating Other Names Spray Stone Paint Application Method Spray State Liquid Coating Main Component Acrylic Emulsion, Natural Stone Powder The Oretical Consumption 3~4kg/m2/coat (thickness Of Dry Film 2mm) Touch Dry 2H/20-25℃ Totally Dry 48H/20-25℃ Recoat Time 2-6H Based On Temperature>5℃& Humidity<85% Introduction: With the unique composite formula technology, Tehao provides you with multi- color, multi-level granite visual effects of advanced water-based paint: this product shows the visual performance of the paint pattern formed by the combination of multiple film colors, which can easily and truly present the three-dimensional texture of color compared to the ordinary Lacquer, bringing noble and gorgeous texture and beauty to all kinds of buildings. Features: • The coating presents the clarity and layering of natural granite. • Pollution resistance, mildew resistance, waterproof, anti-shedding, cleanable, anti cracking and other special functions. • Fast construction and short duration: reduce the load on the structure of the building. • Not affected by the base surface modeling, can be suitable for a variety of base surface types. • Excellent weather resistance, alkali resistance, durability and tightness. Application: Building interior wall, exterior wall, line board, decorative modeling, special modeling, etc. Applicable base surface: Cement mortar surface, concrete surface, plasterboard, wood board, all kinds of fiberboard, metal plate, etc. Surface requirements: Cement-based surface: use cement slurry or special putty to smooth plastering surface defects or hollows. Wood base: clean up, then spray oil seal primer. Metal base: Grind the base with 360# sandpaper, clean it with appropriate chemical solvent, and then coat with special primer. Natural Sand Acrylic Emulsion Coating Paint Stone Effect Wall Paint Rock Pieces Sand Dulux Colorful Flake 0 Natural Sand Acrylic Emulsion Coating Paint Stone Effect Wall Paint Rock Pieces Sand Dulux Colorful Flake 1 Natural Sand Acrylic Emulsion Coating Paint Stone Effect Wall Paint Rock Pieces Sand Dulux Colorful Flake 2

The process is to make corrugated PTFE tube at a certain speed through a temperature of 270℃ ~ 280℃ continuous forward rotation mold. It has all the excellent performance of PTFE but also has the characteristics of flexural, mainly used for strong corrosion resistance and high temperature resistance equipment soft connection dislocation connection, snake pipe, pump engine and other shock parts of the import and export pipe. PTFE bellows and stainless steel metal hose have similar functions, fine appearance, no mechanical impurities, high strength, excellent chemical stability, corrosion resistance, sealing, self-lubricating non-viscosity, electrical insulation and excellent aging resistance, can be used in -60 ~ 250℃ for a long time, has reliable and excellent corrosion resistance, used for conveying strong corrosive medium under high temperature. Widely used in chemical industry, machinery, electronics, electrical appliances, military, aerospace, pipeline, petroleum, spinning machine, electrical insulation, environmental protection and other economic fields. The Technical Indexes of PTFE Corrugated Tubing Length Wall thickness（mm) OD(mm) ID(mm) 1-5 m or customized 1 1.5 2 or customized 12-24 mm or customized 10-20 mm or customized Note: If the customer has special requirements for performance indicators, the parties shall decide through negotiation. Feature of PTFE Plastic Corrugated Tube Operating temperature: -200 degrees to 260 degrees. Workability: flanged. High transparency: Low refractive index in all plastics. Aging resistance: can be exposed to ozone, sunlight for a long time, no aging. Corrosion resistance: Can withstand all strong acids, strong oxidants, strong reducing agents and various organic solvents except molten alkali metals, fluorinated media and above 300°. As one of ptfe products manufacturers, we will do our best to meet all the needs of customers.

You can contact me at any time if you need high quality and low price factory supply. My contact information is Wickr:adarose Threema ID:28R739U8 WhatsApp/Telegram:+8613722791040 Email:ada@sxboaoke.com

You can contact me at any time if you need high quality and low price factory supply. My contact information is Wickr:adarose Threema ID:28R739U8 WhatsApp/Telegram:+8613722791040 Email:ada@sxboaoke.com

You can contact me at any time if you need high quality and low price factory supply. My contact information is Wickr:adarose Threema ID:28R739U8 WhatsApp/Telegram:+8613722791040 Email:ada@sxboaoke.com

The threads of fully threaded studs are distributed on the surface of the whole bolt, which is used to connect parts with large thicknesses and compact structures. Or it is not suitable to use bolted connection due to frequent disassembly. Full thread stud standard are mainly used in the connection between machines. All items are produced in strict accordance with industry standards or client- specific requirements.     As an industrial fastener manufacturer, we provide stud bolt fully threaded, stud full thread, connecting stud, guide stud, full threaded stud, long stud, locating studs, threaded bars, etc. For more information, please feel free to contact us!

Standard Export Carton: 24 pieces per carton Carton Dimensions: 42.5*29*25.5cm Quantity of 20ft Container: 900 Quantity of 40HQ Container: 2090 Port:Guangzhou/Hongkong

Minimum Order: 1200

Hebei Suna Technology Co., Ltd. was founded in 2002，Our main products includes HPMC, HEMC, RDP, HEC, PVA, CMC, Inorganic Pigment, Titanium Dioxide, and so on. Please contact with me if you are interested in our products. My email is export03@cnsuna.com My Whatsapp is +86 18631102067

Minimum Order: 1 bags

Double seal. Moistureproof and leakproof. PP material. a box of multipurpose. Easy to carry. Specifications of portable milk powder box Product name Milk powder box Highlights 1. Double-layer sealing is moisture-proof and leak-proof. 2. Built-in scraper accurately controls the quantity. 3, powder spoon separation, portable, clean and sanitary. 4, spoon bottom double hole design, milk powder easily poured out. 5, a box of multipurpose. 5. Food grade safety materials. Model YB-0032, YB-0033 Components milk powder spoon, milk powder fork, partition plate, dust cover, milk powder box body, silicone sealing ring, sealing buckle plate Capacity 360ml, 480ml Instructions for Use 1. Food grade material, BPA free, safe and odor free, and safe storage of all kinds of food 2. High temperature resistance, boiling and steam sterilization What are the symptoms of milk powder unsuitable for babies? 1. Symptoms of digestive tract, the baby may have symptoms such as nausea and vomiting after eating or during eating, and some may have spasmodic pain in gastrointestinal tract and cry. Some may also have diarrhea or dry stool. 2. Skin symptoms. Children are allergic to certain ingredients in milk powder, which may cause skin rash and rough skin, especially around the mouth and anus. 3. The growth and development speed is slow, and some formula milk storage container have insufficient nutrient content or are not suitable for babies. In the process of feeding babies, the growth speed of weight and height is obviously slow. Leave a Message yoboo ensures the safety and health of every baby and mother. The raw materials of the products are selected from BASF PPSU in Germany, and have SGS, FDA, ROHS, CE, ISO and other testing certifications. Yoboojp provides yoboo milk bottle, yoboo feeding bottle, milk powder container for travel, portable milk powder container, anti colic bottle, etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

Hydroxyethyl Methyl Cellulose CAS:9032-42-2 Hydroxyethyl Methyl Cellulose (MHEC) is also named as Methyl Hydroxyethyl Cellulose (HEMC),used as high efficient water retention agent, stabilizer, adhesives and film-forming agent in kinds of building materials.is widely used in industrial applications ,such as construction, detergent ,paint and coating ,we also can provide HEMC according to customers requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc. Typical properties Appearance White to off-white powder Particle size 98% through 100 mesh Moisture (%) ≤5.0 PH value 5.0-8.0 Specification        , Typical grade Viscosity (NDJ, mPa.s, 2%) Viscosity (Brookfield, mPa.s, 2%) MHEC MH60M 48000-72000 24000-36000 MHEC MH100M 80000-120000 4000-55000 MHEC MH150M 120000-180000 55000-65000 MHEC MH200M 160000-240000 Min70000 MHEC MH60MS 48000-72000 24000-36000 MHEC MH100MS 80000-120000 40000-55000 MHEC MH150MS 120000-180000 55000-65000 MHEC MH200MS 160000-240000 Min70000 Application Applications Property Recommend grade External wall insulation mortar Cement plaster mortar Self-leveling Dry-mix mortar Plasters Thickening Forming and curing Water-binding, adhesion  Delay open-time, good flowing Thickening, Water-binding MHEC MH200M MHEC MH150M MHEC MH100M MHEC MH60M MHEC MH40M Wallpaper adhesives  latex adhesives  Plywood adhesives Thickening and lubricity Thickening and water-binding Thickening and solids holdout MHEC MH100M MHEC MH60M Detergent Thickening MHEC MH150MS Packaging: MHEC/HEMC Product is packed in three layer paper bag with inner polyethylene bag reinforced , net weight is 25kg per bag. Storage: Keep it in cool dry warehouse,away from moisture, sun,fire,rain. KIMA CHEMICAL CO.,LTD www.kimachemical.com

Minimum Order: 1 bags

Hydroxypropyl Methyl Cellulose CAS:9004-65-3 Hydroxypropy , l Methyl Cellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic,detergent,paints,as thickener, emulsifier, film- former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc. Appearance White or off-white powder Methoxy ( % ) 19.0~ 24.0 Hydroxypropoxy ( % ) 4.0 ~ 12.0 pH 5.0~ 7.5 Moisture ( % ) ≤ 5.0 Residue on ignition ( % ) ≤ 5.0 Gelling temperature ( ℃ ) 70~ 90 Particle size min.99% pass through 100 mesh Typical grade Viscosity (NDJ, mPa.s, 2%) Viscosity (Brookfield, mPa.s, 2%) HPMC MP400 320-480 320-480 HPMC MP60M 48000-72000 24000-36000 HPMC MP100M 80000-120000 40000-55000 HPMC MP150M 120000-180000 55000-65000 HPMC MP200M 160000-240000 Min70000 HPMC MP60MS 48000-72000 24000-36000 HPMC MP100MS 80000-120000 40000-55000 HPMC MP150MS 120000-180000 55000-65000 HPMC MP200MS 160000-240000 Min70000   , Typical Applications: Tile Adhesive •Good water retention: prolonged opening time will make tiling more efficient. •Improved adhesion and sliding resistance: especially for heavy tiles. •Better workability: lubricity and plasticity of plaster is ensured, mortar can be applied easier and quicker. Cement Plaster / Dry mix mortar •Easy dry mix formula due to cold water solubility: lump formation can be easily avoided, ideal for heavy tiles. •Good water retention: prevention of fluid loss to the substrates, the appropriate water content is kept in mixture which guarantees longer concreting time. •Increased water demand: increased open time, expanded spry area and more economical formulation. •Easier spreading and improved sagging resistance due to improved consistency. Wall putty •Water retention: maximized water content in slurry. •Anti-sagging: when spreading a thicker coat corrugation can be avoided. •Increased mortar yield: depending on the weight of the dry mixture and appropriate formulation ,HPMC can increase the mortar volume. Exterior Insulation and Finish System ( EIFS ) •Improved adhesion. •Good wetting ability for EPS board and substrate. •Reduced air entrancement and water uptake. Self-leveling •Protection from water exudation and material sedimentation. •No effect on slurry fluidity with low viscosity HPMC, while its water retention characteristics improve the finish performance on the surface. Crack Filler ·Better workability: proper thickness and plasticity. ·Water retention ensures prolonged work time. ·Sag resistance: improved mortar bonding ability. Pharmace , utical excipient and food application： Usage Product grade Dosage Bulk Laxative 75K4000,75K100000 3-30% Creams, Gels 60E4000,65F4000,75F4000 1-5% Ophthalmic Preparation 60E4000 01.-0.5% Eye drops preparations 60E4000, 65F4000, 75K4000 0.1-0.5% Suspending agent 60E4000, 75K4000 1-2% Antacids 60E4000, 75K4000 1-2% Tablets binder 60E5, 60E15 0.5-5% Convention Wet Granulation 60E5, 60E15 2-6% Tablet coatings 60E5, 60E15 0.5-5% Controlled Release Matrix 75K100000,75K15000 20-55% Packaging: HPMC Product is packed in three layer paper bag with inner polyethylene bag reinforced , net weight is 25kg per bag. Storage: Keep it in cool dry warehouse,away from moisture, sun,fire,rain. KIMA CHEMICAL CO.,LTD www.kimachemical.com

Minimum Order: 1 bags

TITANSUHE produces slings and rigging that are to be used with lifting equipment or crane for positioning, lifting, and transferring large loads. These sling lift and rigging can be categorized into three general types according to their construction and materials: chain slings, polyester slings, and wire rope slings. Sling lifting straps are more used for short-length material handling or road rescues. Polyester slings are widely used in applications that need soft touch and protection to the load's surface. Wire rope slings can be engineered with extremely long lengths, suitable for long- distance material and equipment handling such as bridge and building constructions. Lifting Slings Types for Sale Polyester Slings Webbing Slings and round slings are usually used to lift loads that need protection from damage. These polyester webbing slings are specially designed to carry heavy loads and lift them safely. It's very strong yet lightweight, and its flexibility reduces shock when loading. They come out with bright colors and easily to identify their capacity on body. Chain Sling The chain sling is a very sturdy chain hook tool. Rigging lifting straps are available with grade 100 or grade 80 chain that combined with different accessories to form one, two, three or four chain legs. Hooks with different ends and chain lengths are used for various construction or industrial sites. Wire Rope Sling Wire ropes are often made into different forms of slings for the lifting industry due to their high strength, durability and wear resistance. Why Choose Titansuhe be your lifting slings suppliers? Each chain links and chain components are tempered and quenched to get high strength and abrasion resistance for overhead lifting.To make chains fit properly with hooks or hoists also get each link calibrated before delivery. G80 chain can be used in any rigging application that requires a 30-80 grade chain. To identify class 80 slings and lifting chains, all chains are marked with embossed G80 on body. This do good for your checking during usage. The chain components are also completed through a rigorous inspection process and testing procedure to ensure that the end user gets a quality chain sling. Safe Use of Hoists and Slings Determine the load weight and be sure it’s within the rated capacity of the sling. Chose rigging slings that have suitable characteristics for the type of load, hitch and environment. Never use lifting slings exceeding its rated capacity. When using 2 leg or multi-leg slings, the load angle will affect the rated load. See load chart below. Lifting slings with fittings which are used as a choker hitch shall be of sufficient length to assure that the choking action is on the slings and never on a fitting. When using lifting slings in a basket hitch, be attention to balance the load and prevent slipping. Be sure the fittings have proper shape and size of the opening that can seat properly in the hook or other attachments. Keep rigging slings away from the sharp corners, sharp edges that may cut or damage the slings, protrusions or abrasive surfaces. Do not drag slings on the floor or over an abrasive surface. Do not twist or tie slings into knots or join slings by knotting. Do not pull slings from under loads if the load is resting on the sling. Do not drop slings equipped with metal fittings. Do not use slings that have damages or defect unless it is inspected and accepted by qualified person. When use slings in hitched, it should be able to control the load. Always stand clear from between the sling and the load, and from between the sling and the crane hook or hoist hook. Always keep personnel away from the suspended load. Do not allowed personnel ride the sling. Do not shock loading. Do not twist and kink the sling legs. Always center the load in the hook bowl to prevent point loading on the hook. During lifting, with or without the load, personnel shall be alert for possible snagging. When using slings a basket hitch, always contain and support the load from the sides above the gravity center. Always pay attention to the angle of the legs and select slings with enough length to provide adequate rated capacity. Place blocks under load prior to setting down the load, to allow removal of the slings, if applicable. Do not use Nylon or duplex polyester webbing sling at temperatures above of 194 degrees F (90 degrees C). Do not expose the polyester slings under sunlight or ultra-violet light which will degrade the strength of the slings. Always keep slings in a dry, cool and dark place when not in use. In choker hitch, slings shall be long enough so that the choker lifting chokes onto the sling eye or body and never onto any fittings. Do not use slings at angles of less than 30 degrees from horizontal. Inspection Before Buy Lifting Slings A. Initial Inspection Before placing any new or repaired slings in service, always inspect the sling and be sure that the correct sling is being used, and the sling meets the requirements of this specification and has not been damaged in shipment. Failure to read, understand and follow the use and inspection instructions with each sling may result in severe personal injury or death B. Frequent Inspection Before each using, inspect the slings by a qualified person. C. Periodic Inspection Periodically inspect the slings by a designated personnel base on following information. 1. Sling using frequency 2. Sling service condition 3. Sling service life 4. Periodic inspections should be conducted at least monthly Angle and Load Chart of Lifting & Rigging Slings ANGLE is measured between a horizontal line and the sling leg or body. This angle is very important and can have a dramatic effect on the rated capacity of the sling. As illustrated, when this angle decreases, the load on each leg increases. This principle applies whether one sling is used to pull at an angle, in a basket hitch or for multi-legged bridle slings. This data is only for equally loaded sling legs. Sling angles of less than 30 degrees are not recommended. Sling Angle in Degrees Factor 90 1.000 85 0.996 80 0.985 75 0.966 70 0.94 65 0.906 60 0.866 55 0.819 50 0.766 45 0.707 40 0.643 35 0.574 30 0.500 Products Lifting Tools and Equipment  Chain Hoist  Wire Rope Hoist  Trolley & Clamps  Lifting Clamps  Lifting Jack  Lifting & Rigging Slings  Polyester Slings  Chain Sling  Wire Rope Sling  Wire Rope Winches  Material Handling Equipment  Rigging Equipment  Tools & Hardware  Elevator  Removal Lifting & Rigging Slings From Service Removed slings from service if any of the following are visible: Sling tag information is missing or not readable. Acid or alkalis burns. Melting, charring or weld spatter of any part of the sling. Holes, tears, cuts, snags or embedded particles. Broken or worn stitching in load bearing splices. Excessive abrasive wear. Knots in any part of the sling. Distortion, excessive pitting,corrosion or broken fittings. Any conditions which cause doubt as to the strength of the sling. Metal Fittings that are cracked, deformed, including melting or charring. Hooks with throat openings increased by more than 15 percent or twisted out of plane more than 10 degrees. If you need any kinds of lifting products, please contact us, as one of the most professional lifting equipment manufacturers, TITANSUHE is willing to offer you high quality products.

Minimum Order: 1 bags

Chlorinated Polyethylene Membrane for High Speed Rail The chlorinated polyethylene waterproofing membrane is a colorful elastic waterproof material made of chlorinated polyethylene resin as the base material. Product Description The chlorinated polyethylene waterproofing membrane(CPE waterproof membrane) is a colorful elastic waterproof material made of chlorinated polyethylene resin as the base material, mixed with chemical additives and fillers, and processed by plastic refining, hot compounding, calendering, crimping, and other processes. The product divides into N class homogeneous and L class fiber conforming. The main material of chlorinated polyethylene, no double bond in its macromolecular structure, has good aging resistance, oil resistance, and chemical resistance;blending with rubber, high elasticity, high elongation, and good low-temperature resistance, and has strong adaptability to foundation settlement and concrete shrinkage joints. From this aspect, chlorinated polyethylene rubber blended waterproofing membrane has the dual characteristics of chlorinated polyethylene and rubber, is a better waterproof membrane for high speed rail.   Features of Waterproof Membrane for High Speed Rail: 1. High tensile strength, strong seepage resistance, good low-temperature flexibility, small expansion coefficient, strong adaptability to deformation, big coefficient of friction, can be used with a variety of adhesives, good bonding effect; 2. Aging resistance, long service life; 3. It can directly construct on freshly cast concrete, which can effectively shorten the construction period and save the construction cost.   Cautions: ①Configured paint should use up within 20 mins, with the allocation. ②Rainy days, snowy days, more than five winds, the temperature is higher than 35 ℃ or lower than 5 ℃ is not suitable for construction. ③Pay attention to ventilation when storing and transporting, avoid direct sunlight, and prohibit direct contact with acid, alkali, oil, and chemical solvent. Place in a cool and dry place, suitable temperature -15℃~35℃. The storage period is 12 months.   Construction Method: ①Preparation: clean up the oil, slick, cement slag, loose layer, etc. On the base surface, treat and repair the unevenness; do waterproofing reinforcement layer on specific parts first before large area construction. ②Construction: paste waterproofing materials with polyurethane or cement-based adhesive. Side painting binder while paving waterproofing materials, while scraping board in the upper part of the coil back and forth scraping solid, forbidden to have bulging, blistering and other phenomena, polyurethane waterproofing coating or cementitious adhesive for sealing. Get a free quotation about waterproof membrane for high speed rail