Connectors, Terminals & Contactors - Others

Industrial Control Line AI/AO Analog signal RS485 Protector The control signal lightning protector is designed to protect the control line system to protect the electrical and electronic equipment's signal line from the impact of the lightning electromagnetic pulse, induced over-voltage, transient operation, and resonance overvoltage. The interface form of the product is crimp type, which protects 1-4 lines, and can be used in industrial control fields with different voltage specifications of 6-48V. Control line protector is designed for control line system to protect electrical and electronic equipment's signal line from the impact of lightning electromagnetic pulse, induced over voltage, transient operation and resonance over voltage. The control line surge arrester lan can be used in RS232, LAN, MODEM BUS, etc. Application of SPD for Control Signal System V.1, X.27, RS485, RS422, RS232 protector. LAN, CAN, V.24/RS232-C, MODEM surge  protector bus. TOKEN-RING, INDUSTRIAL BUS. Suitable for the signal's transmission rate protection under the same voltage and same specifications. Analog signal lightning arrester. Protect power supply and control line for camera. Loss prevention system device; Security system; Security integration. IASP; VSCS; ESA; ACS; exit-inlet control system; exit-inlet control system. Technical Parameters of SPD for Control Signal System Model D05Y2(-A) D05Y4 D12Y2(-A) D12Y4 D24Y4 D36Y2(-A) Lightning projection zone(LPZ) 2 Standards Compliance IEC61000, EN60950 According to IEC61643 III According to DIN VDE6075 Part6(Draft 11.89) A1, A2 D Max continuous operating voltage Uc 5V 12V 24V 36V Nominal discharge current (8/20s) In 3K Max discharge current Imax (8/21s) Imax 5KA Limiting Voltage(10/700s) 20V 40V 100V 120V Cut-off Frequency fG 20MHz Response time tA (LN / N-PE) 1ns Protection port 2 4 2 4 4 2 Mounting Be Installed between protected equipment and signal line Max connecting line diameter 1.5mm2 Recommend connecting line diameter 1mm2 Transmission standards 10Mbps Dimension Regular type: 85*25*25mm DIN rail type: 90*14*65mm Interface form Compression plug IP code (IEC EN 60529) IP20 Largest terminal installation torque 0.6-0.8 N.m Material/color Aluminum/Blue Insertion loss 5dB Working conditions Temperature: -40 to 85 Relative humidity Features of SPD for Control Signal System Low insertion loss, fast response Low limiting voltage Precise limiting voltage Strong discharge current Crimping If you want to know more about lan surge protector , please contact us. As one of surge arrester manufacturers, we will provide more high quality products for customers, if you have needs, please leave us a message.

SPD China for audio video surge protector With a standard RJ11/45 interface, the surge protector for audio equipment is suitable for audio signal lightning protection of 1 to 4 pairs of dedicated communication lines and protection of trunk lines and internal lines of program-controlled exchanges. Phone line surge suppressor for audio equipment is mainly used in telephone, public broadcasting system to protect electrical and electronic equipment's signal line from the impact of lightning electromagnetic pulse, induced over voltage, transient operation, and resonance over voltage. We provide ADSL surge protector for landline phone, APC telephone surge arrester, surge protector with phone jack for landline phone, as well as many other customized audio SPD unit. For more information, please feel free to contact us. Application of SPD for Audio Siganl System Designed for Audio device not to be spoiled by lightning over-voltage, induced over-voltage, and static discharge. Telephone, Fax ISDN, DDN, DSL, ADSL, VDSL Broadcast system Technical parameters of SPD for Audio Siganl System Model D180R2 R180R4 D180R2-16 D180Y2-10 D180Y2-A Lighning proection zone(LPZ) 2 Standards Compliance IEC61000, EN60950, GB/T18802.21-2002, TB/T2311-2002 According to IEC61643 III According to DIN VDE6075 Part6(Draft 11.89) A1,A2 D Max continuous operating voltage Uc 180VDC Nominal discharge current (8/20µs) In 3KA Max discharge current Imax (8/21µs) Imax 5KA Rated Load Current 500mA Cut-off Frequency fG 16MHz Series Impedance per line R 2.2Ω Limiting Voltage(10/700µs) ≤250V Protection level @20kA, 8/20µs Up ≤350V Response time tA (L-N/N-PE) 1ns Protection line 2,3/4,5 2/3,4/5 2,3/4,5 2 line 2line Protection port 1 2 16 10 1 Mounting Be installed between protected equipment and signal line Transmission rate 10Mbps Dimension 85(H)×25(W)×25(L)mm 480 (H)×86(W)×42(L)mm 96 (H)×43(W)×70(L)mm 90 (H)×14(W)×65(L)mm Interface form RJ11 RJ11 RJ11 Inserting type clamped type IP code(IEC EN 60529) IP20 Max connecting line diameter 1.5 mm2 Material/color Aluminum/Blue Recommend connection line diameter 1 mm2 Largest terminal installation torque 0.6-0.8 N.M Working conditions Temperature: -40 to 85℃, Relative humidity: ≤95％ Installation And Wiring Diagram of SPD for Audio Siganl System SPD for Audio Siganl System Features of SPD for Audio Siganl System Multi. Protection circuits, Gas-Tube+ TVS technology Dual protection in Common module and different module Multi-Strike Capability If you want to know more about telephone line protection unit, please contact us.

The main products in our company include liquid level sensor, flow meter, magnet position sensor, liquid angle detection sensor, ultrasonic level sensor, motion sensor and pressing switches. We have focused on level sensor for over 16 years, have more than 30 patents and got national/local award many times. Our products can be widely applied in household equipment such as cleaning machine,coffee machine,water dispenser,water purifier. We have cooperated with many top level international top 500 enterprises and can customize according to your requirement.

Minimum Order: 10 long tons

Ican Non-captive Stepper Motor nema17 for printer nema 17 hybrid stepper motor Non-captive shaft linear actuator is to allow greater installation coaxially error Nema 17 lead screw stepper motor is a stepper motor with lead screw, it can be used in high-precision requirements Customization is available to base on the following parameters: Lead screw sizes, such as length, diameter, lead, and pitch Nuts material, such as POM, copper Motor leads, such as lengths, cables, and various connectors Encoders, brakes Waterproof, dustproof, and rustproof treatment Located in Dongguan city (“the world factory”), as a stepper motor manufacturer, stepper motor manufacturers, planetary gear reducer manufacturer, bldc motor manufacturer, we demonstrate our professionalism in OEM/ODM production in the past 9 years. If you are interested in stepping motor, please click here to visit our website. https://ican-motor.com

Varistor 07D471K varistor high quality varistor sell varistor wholesalers Varistor features: 1. Small size, absorb transient overvoltage, large surge current resistance. The voltage range is wide, range from several volts to thousands of volts for a single varistor. 2. Low limiting voltage (residual voltage), low leakage current, fast response speed (ns level), Front and back symmetrical volt-ampere characteristics, the flow rate of a single varistor can reach 70KA or higher. Electrical characteristics: Technical Data Model Size Ф5mm ~ Ф20mm Operating/Storage Temperature -40℃ ~ +85℃(+125℃ VDE)/-40℃ ~ +125℃ Withstanding Surge Current 100~6500A Approved Monogram UL ,VDE ,CSA ,CQC Series Maximun Allowable Voltage Varistor Voltage Maximun Clamping Voltage AC rms(V) DC(V) Min. Vb(Vdc) Max. Vc(V) lp(A) JNR 7~1000 9~1465 9.6~1620 12~1800 14,4~1980 25~2970 1~100 We Provide Precision Resistor and Buy Resistor, Our company has been committed to supply personalized product solutions to customers,please Consult Us. If you want to know more industry information about resistors and capacitors, please click here. https://www.jeccapacitor.com/varistor , /varistor-07d471k.html

Minimum Order: 1000

Varistor 05D561K cheap resistors varistor supplier varistor high quality varistor 05d561k manufacturer varistor generator features: 1. Small size, absorb transient overvoltage, large surge current resistance. The voltage range is wide, range from several volts to thousands of volts for a single varistor. 2. Low limiting voltage (residual voltage), low leakage current, fast response speed (ns level), Front and back symmetrical volt-ampere characteristics, the flow rate of a single varistor can reach 70KA or higher. Varistor Electrical characteristics: Technical Data Model Size Ф5mm ~ Ф20mm Operating/Storage Temperature -40℃ ~ +85℃(+125℃ VDE)/-40℃ ~ +125℃ Withstanding Surge Current 100~6500A Approved Monogram UL ,VDE ,CSA ,CQC Series Maximun Allowable Voltage   Varistor Voltage Maximun Clamping Voltage     AC rms(V) DC(V) Min. Vb(Vdc) Max. Vc(V) lp(A) JNR 7~1000 9~1465 9.6~1620 12~1800 14,4~1980 25~2970 1~100 If You Are Finding Lighting Capacitor and High Density Capacitor and China Capacitor In China, We Will Be Your Best Choose! We Have Our Own Factory, So We Can Give You A Cheap Price! If you want to know more industry information about resistors and capacitors, please click here. https://www.jeccapacitor.com/varistor , /varistor-05d561k.html

Minimum Order: 1000

CL23B 100NJ100 metallized film capacitor metallized polyester film capacitor manufacturers film capacitor for sale Capacitor features: Small size, good self-healing, strong anti-pulse ability, high reliability capacitors capacitance Electrical characteristics: Technical requirements reference Standard GB/T 7332 (IEC 60384-2) Climatic Category 55/125/56 Operating Temperature -55℃~105℃（+85℃~+105℃：decreasing factor1.25% per℃ for UR） Rated Voltage 63V,100V,250V Capacitance Range 0.001μF~1μF Capacitance Tolerance ±5%(J) 、±10%(K) Withstand Voltage 1.5UR , 5sec Insulation Resistance(IR) Cn≤0.33μF,IR≥15000MΩ ;Cn>0.33μF,RCn≥5000s at 100V,20℃,1min Dissipation Factor (tgδ) 1% Max , at 1KHz and 20℃ JYH HSU(JEC) ELECTRONICS LTD. is Provide Resistors For Sale and Varistor 05d561k Manufacturer and Film Capacitor For Sale, If You Need, Welcome To Contact Us To Know More. If you want to know more industry information about resistors and capacitors, please click here. https://www.jeccapacitor.com/film-cap , acitor/mini-box-metallized-polyester-film- capa , citor-meb-cl23b100nj100.html

Minimum Order: 1000

Material: PVC Black print on white rings Item No.: LT-020 Applying Wire: 28-26AWG Applying Wire Overall Diameter: 1.0 - 1.3 mm Marrow Lin Development Company, founded in 1990, focuses on copper terminals and connectors. Supplying an extensive product range including JIS and DIN standard Pre-insulated and Uninsulated Crimp Terminals, Cord- end Ferrules, etc.

Material: PE ; Shrinkage Ratio: 2:1 Operating temperature : -55°C~125°C Minimum shrink temperature : 70°C Minimum fully recovery temperature : 110°C UL and RoHS Certificate Color: Black, White, Red, Blue, Yellow, Green Special size: Cutting pieces are available on request Marrow Lin Development Company, founded in 1990, focuses on copper terminals and connectors. Supplying an extensive product range including JIS and DIN standard Pre-insulated and Uninsulated Crimp Terminals, Cord- end Ferrules, etc.

Material: Cap and Body-Nylon 6.6; Seal Insert-Neoprene Temperature resistance : -30°C to 80°C; Short time : 140°C Color: Black, Silver Grey, Dark Grey, others on request Marrow Lin Development Company, founded in 1990, focuses on copper terminals and connectors. Supplying an extensive product range including JIS and DIN standard Pre-insulated and Uninsulated Crimp Terminals, Cord-end Ferrules, etc.

Specification: Item No.: G90-6/5 Conductor Section: 6 Bolt: M5 Description: Lugs are used for connecting electrical devices and cables, and since most cable wires are stranded, it is necessary to use terminal lugs to hold the strands together to aid in fastening the wires to terminal studs. The terminals used in electrical wiring are either of the soldered or crimped types. Marrow Lin provides high-quality Lugs with the most complete session, are manufactured from 99.9% Cu high conductivity electrolytic copper tube, which gives the best electrical properties possible. With an extremely low coefficient of thermal expansion, Marrow Lin's lugs are certainly a fire hazard-free product.

Specification: Item No.: A2.5-1 Conductor Section: 0.5-1 Bolt: M2.5 Description: Lugs are used for connecting electrical devices and cables, and since most cable wires are stranded, it is necessary to use terminal lugs to hold the strands together to aid in fastening the wires to terminal studs. The terminals used in electrical wiring are either of the soldered or crimped types. Marrow Lin provides high-quality Lugs with the most complete session, are manufactured from 99.9% Cu high conductivity electrolytic copper tube, which gives the best electrical properties possible. With an extremely low coefficient of thermal expansion, Marrow Lin's lugs are certainly a fire hazard-free product.