Computer Hardware & Software

Like MTP/MPO cable, MTP/MPO Shuffle cable is also used for connecting MTP modules together as a permanent link, and it also be used with plug-and-play modules or MTP/MPO connector panels to achieve multi-level connection of the extension of the pre-terminated trunk cable by MTP/MPO panel. Normally, the shuffle cables are used to interconnect cassettes, panels, or ruggedized MTP/MPO fanouts, spanning MDA, HDA, and EDA zones. The difference is that its optical fiber routing is formulated according to the requirements of the optical connection at the construction site, which can realize special optical fiber routing different from the conventional polarity, reducing network installation or reconfiguration time and cost. Features of MTP/MPO Shuffle Cable Low loss performance Up to 288 fibers – ideal for high-density applications Available in OS1, OS2, G.657A2, OM3, OM4 Fiber Grades – OM1 and OM2 available upon request Option for LSZH, OFNP or OFNR cable jacket 100% factory terminated and tested Pulling eyes are provided as an option to protect the fiber ends during installation Save installation and reconfiguration time Applications of MTP/MPO Shuffle Cable Data Centers 40/100G applications Storage area network- fiber channel Parallel optics InfiniBand The internal connector application in fiber equipment Standards Compliance of MTP/MPO Shuffle Cable TIA/EIA-568.3-D and ISO/IEC 11801 IEC-61754-7 & EIA/TIA-604-5&GR-1435-CORE NFPA 262 or IEC 60332 Compliant to Directive 2002/95/EC (RoHS) and REACH SvHC EN 50575 InfiniBand Compliant Specifications of MTP/MPO Shuffle Cable General Specification Construction Description Fiber Count 12-288 Fibers Fiber Mode Single mode: OS2/G657 9/125um Multimode: OM4 50/125um, OM3 50/125um Fiber Brand SMF-28® Ultra optical fiber Corning ClearCurve® multimode fiber Cable Jacket Ratings Riser (OFNR) Plenum (OFNP) Low Smoke Zero Halogen (LSZH) Cable Jacket Color OS2/G657: Yellow OM3: Aqua; OM4: Aqua/Magenta or Customized Polarity Customized Connector Ferrule 12F/16F/ 24F/32F/48F Connector Ferrule Brand US Conec, HANKUSAN, Nissin Connector Type MTP Female, Male; MPO Female, Male Connector Brand US Conec MTP, Senko MPO, Nissin MPO, Sanwa MPO, FURUKAWA MPO Connector Color Ferrule SM(APC) SM(PC) OM3 OM4 or Customized Low loss Yellow Yellow Aqua Magenta Standard Green Blue Aqua Magenta Connector Boot Color Green/Black/ or Customized Pulling eye Customized Operating Temperature -20°C to +70°C Storage Temperature -40°C to +85°C Technical Specification Optical Properties Single mode Multimode Insertion Loss (dB) Low loss Standard Low loss Standard ≤0.35(Typical:≤0.25) ≤0.75(Typical:≤0.4) ≤0.35(Typical:≤0.2) ≤0.5(Typical:≤0.35) Return Loss (dB) PC≥50; APC≥60 PC≥20; APC≥40 Wavelength (nm) 1310/1550 850/1300 Durability ≤0.3 (dB)typical change, 50 matings Fiber Attenuation (dB/km) Single Mode: ≤0.35 at 1310nm, ≤0.2 at 1550nm Multimode: ≤2.3 at 850nm, ≤0.6 at 1300nm Typical Cable Structure of MTP/MPO Shuffle Cable Fiber Count OD(mm) Nominal Weight(kg/km) Max.Tension(N) Max.Crushing Resistane(N/100) Short term long Term Short term long Term 12 3.0±0.1 8.1 150 80 500 150 24 3.0±0.1 8.5 160 80 500 150 24 9.0±0.5 72 500 180 1000 300 36 9.0±0.5 78 500 180 1000 300 48 9.0±0.5 79 600 200 1000 300 60~72 11.2±0.5 126 1000 300 1000 300 96 13.5±0.5 178 1000 300 1000 300 144 17.5±0.5 285 1000 300 1000 300 Note: The true weight of optical cable may have some tolerance with the above-stated value. T&S Communications is one of professional fiber optic accessories suppliers. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed by engineers at T&S, our MTP/MPO loopback adapter can transmit the optical network signal from the transmitter to the receiver, thereby forming the optical signal receiving and transmitting loop. MTP / MPO fiber loop provides a fast and efficient way to test the transmission capacity and receiving sensitivity of optical network equipment. T & S MTP / MPO fiber loop has 8F, 12F, 16F, 24F, 32F channels with low loss and conventional loss, single-mode and multi-mode options. Our MTP/MPO loopback adapter is now widely used for optical network equipment self-test, network diagnosis, and test, etc. Specifications of MTP/MPO Loopback General Specification Construction Description Fiber Count 2fibers for duplex type; 2-24fibers for multi-fiber connector Fiber Mode Single mode: OS2/G657 9/125um Multimode: OM1 62.5/125 um OM2 OM3OM4 50/125um; Fiber Brand Corning SMF-28® Ultra optical fiber Corning ClearCurve® multimode fiber Cable Jacket Ratings Low Smoke Zero Halogen (LSZH) Riser (OFNR) Plenum (OFNP) Cable Jacket Color OS2/G657: Yellow OM1&OM2: Orange OM3: Aqua; OM4: Aqua/Magenta or Customized Polarity Type A, Type B, Type C (TIA-568.3-D) or Customized Connector Type SC LC MPO MTP Connector Color (SC LC) SM(APC) SM(PC) OM3 OM4 or customized Green Blue Aqua Magenta/Aqua Connector Color (MPO MTP) SM(APC) SM(PC) OM3 OM4 or customized Low Loss Yellow Yellow Aqua Magenta/Aqua Standard Green Blue Aqua Magenta/Aqua Loopback housing color black Operating Temperature -20°C to + 70°C Storage Temperature -40°C to + 85°C Technical Specification Optical Properties Singlemode Multimode Insertion Loss (dB) APC ≤ 0.30 (Typical:≤ 0.15 ) UPC ≤ 0.20 (Typical:≤ 0.1 ) APC ≤ 0.30 (Typical:≤ 0.10 ) PC ≤ 0.20 (Typical:≤ 0.1 ) Insertion Loss (dB) Low loss≤ 0.35 (Typical:≤ 0.25 ) Low loss≤ 0.35 (Typical:≤ 0.2 ) Standard Loss≤0.75 (Typical:≤ 0.4 ) Standard Loss≤ 0.6 (Typical:≤ 0.35 ) Return Loss (dB) PC≥50; APC≥60 PC≥20; APC≥40 Wavelength (nm) Singlemode: 1310/1550, Multimode: 850/1300 Fiber Attenuation (dB/km) Singlemode: ≤0.35 at 1310nm, ≤0.2 at 1550nm Multimode: ≤2.3 at 850nm, ≤0.6 at 1300nm Transmission Distance OM4: 150m at 40/100G, 550m at 10G OM3: 100m at 40/100G, 300m at 10G MTP Loopback with Housing and Pull-tab  The MTP loopback occupies both ends of fiber in a duplex connector or a multi-fiber connector. This MTP lookback with housing and pull-tab can provide an effective solution so as to test the emission ability of the network equipment and receive sensitivity. Especially in 40/100G network communication, our MTP loopback devices can achieve optical fiber network in pairs on a single element or interface and conduct effective tests and evaluation of the Internet through back signal positioning. T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know about ts communication? Please contact us.

T & S MTP Cable Assemblies / MPO cable assembly meets the requirements of IEC61754, IEC61755, TIA568, GR1435 and other standards, and adopts a push- pull locking structure with male and female heads to ensure butt tightness and low loss. Single head loss of SM product: conventional product IL ≤ 0.75db, RL ≥ 60dB; elite product IL ≤ 0.35db, RL ≥ 60dB. Single head loss of MM product: conventional product IL ≤ 0.60db, RL ≥ 20dB; elite product IL ≤ 0.35db, RL ≥ 20dB. The optical fiber channel is used for termination and supports high bandwidth applications. It is specially designed to save cable management time and high-density fiber distribution area. The outer diameter of the optical cable can match the pre-termination of Ø 2.0 ~ 5.5mm, and the spring elasticity of 9.8N and 20n can be matched; mm supports 10g, 40g, 100g and 400g applications. FAQs of MTP/MPO Cable Assembly What Is The Minimum Length For A Mtp/mpo Trunk Cable?  For trunk cable, minimum length is 0.3 in general. For customized requirements, please contact T&S sales team for details. MTP Connector and MPO Connector MTP connector is one type of MPO connector with even greater optical and mechanical performance when compared to ordinary MPO connectors. MTP is the brand of its better designed MPO connector owned by USConec. What's The Difference Between Ofnp And Lszh Cable Jacket? OFNP (plenum) jacket is of the highest fire retardant rate. It gives off little smoke when on fire, LSZH (Low Smoke Zero Halogen) cable jacket is composed of thermoset compounds that emit limited smoke and no halogens when exposed to flame. At T&S, there are various jackets of different colors and materials for you to choose from. T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

Fiber optical master cord and bus cord are produced by standard ferrule with high-standard connector kits via special production process. According to different application requirements, the master cord can be generally divided into two grades: bus cord and master card. The product has characteristics like low loss, good consistency and good interchangeability, which can minimize the impact of the test system on the test results. It is widely used in product testing, instrument calibrations. Application of Master Cord Produced by T&S, a professional supplier of fiber optic connectivity products, our master cords can be applied to the following occasions: measure the connection/insertion loss by physical contact measure the direction of eccentricity measure return loss by physical contact Manufactured under strict quality control, our fiber optical master cords are of consistently high quality. T&S Communications is one of professional fiber optic accessories suppliers. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

As the " Optical Fiber Sensing Engineering Technology R&D Center of Guangdong Province " , T&S takes the frontier application and development of fiber grating sensing technology as the main research direction and introduces the most practical and creative products to the market. FBG Sensor Being a fiber optic sensor, a FBG sensor has all the advantages usually attributed to these devices, such as low loss relative to the fiber length, immunity to electromagnetic and radio frequency interference, small size and weight, intrinsically safe operation in environments characterized by hazardous materials, high sensitivity and long-term reliability. In addition, fiber Bragg grating technology reveals an inherent serial multiplexing capacity and an ability to provide absolute measurements without the need for referencing. This makes it a natural alternative to conventional electrical sensing technologies. ID Reflector FBG ID Reflector can be used in FTTX fiber trouble-shooting monitoring. The combination of the OTDR and FBG Reflector can detect and locate fiber faults in minutes, protect the investment of unused fibers, and reduce the cost of maintenance. FBG ID Reflector is one of the two solutions under U-band Reflector (The other is Thin Film based TFR, and both the two are available at T&S.). FBG Reflector has been granted China patent and US patent. According to the standard ITU-T G.982, the reflectance of any optical component between ONU and OLT should be better than -35dB, which makes FBG Fiber Reflector a perfect solution. T&S FBG Fiber reflectors are designed in different encapsulation forms to fit different applications. Customized encapsulations are also available. T&S Communications is a professional fiber bragg grating manufacturer. We provide WDMs, Fiber Optic Component and so on. Want to know about ts communication? Please contact us.

FBG Strain Sensor measures the strain by utilizing the inherent feature of strain sensitivity of FBG. The kind of FBG sensor fits to be embedded to measure the strain in a ban, bridge, tunnel, and other constructions. Features of FBG Strain Sensor High precision Resistant to electromagnetic interference Quick response High stability and reliability Effective lattice network for multi-point measurement Specifications of FBG Strain Sensor Item Unit Value Wavelength nm 1510~1590 range με 5000 Resolution με 1 precision με 5 Connector type --- FC/APC or Customize Cable type mm Φ3 Size mm Φ17×70 T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

FBG sensors can be deployed in harsh environments including high temperature, high radiation, high vacuum, high pressure, and low- temperature, such as power transformer, switch cabinet and other power equipment hot spot monitoring; high-power generator vibration and temperature monitoring; wind blade monitoring; aircraft fuel tank stress monitoring; thermal nuclear reactor strain, temperature, and displacement monitoring; spacecraft monitoring and so on. As a professional fiber Bragg grating manufacturer, T&S can provide you with high-quality sensor FBG at reasonable prices, our production line includes FBG strain sensor, FBG temperature sensor, fiber bragg grating pressure sensor, etc. Please feel free to leave us a message. FBG Sensor Application Commercial transportation Complicated sensing of humidity, high voltage, oil, etc. Advanced telecommunications Multi-point measurements Wind blade monitoring Aircraft fuel tank stress monitoring Spacecraft monitoring Optical Strain Gauge - How Does It Work? Though mainly used to measure strain, the fiber Bragg grating pressure sensor can actually be integrated into different types of transducers. It can effectively conduct the functions of measuring temperature, acceleration, or displacement. In comparison with the traditional electrical strain gauges, the sensor FBG does not need any electricity. Working on the basis of the light that propagates through a fiber, the FBG pressure sensor are completely passive and immune. However, it should be noted that normally, the FBG sensors are extremely susceptible to temperature. The fiber will expand when the temperature rises and contract when the temperature drops. Thus, it is important to make sure temperature compensation towards the sensor FBG is well done during its working time. FBG Sensor FAQs Where can FBG temperature sensors be used? Due to its good insulation performance, explosion-proof, waterproof and anti-electromagnetic interference ability, FBG temperature sensors is especially suitable for complex applications such as humidity, high voltage, oil and so on. Does the FBG sensor need maintenance after installation? After the installation and debugging of the sensor FBG, no additional maintenance is needed. You will only need to protect the FBG pressure sensors from damage and fracture. T&S Communications is one of professional fiber optic accessories suppliers. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

FBG ID Reflector can be used in FTTX fiber trouble-shooting monitoring. The combination of the OTDR and FBG Reflector can detect and locate fiber faults in minutes, protect the investment of unused fibers, and reduce the cost of maintenance. FBG ID Reflector is one of the two solutions under U-band Reflector (The other is Thin Film based TFR, and both the two are available at T&S.). FBG Reflector has been granted China patent and US patent. According to the standard ITU-T G.982, the reflectance of any optical component between ONU and OLT should be better than -35dB, which makes FBG Fiber Reflector a perfect solution. T&S FBG Fiber reflectors are designed in different encapsulation forms to fit different applications. Customized encapsulations are also available. Features of FBG ID Fiber Reflector A Chirped FBG Embedded IL<1db and="" rl="">35dB at Pass Band Comply with ITU-T G.982 Stable and Reliable Specifications of FBG ID Fiber Reflector Parameters P/S Min Typical Max Pass Band (nm) - - 1260 - 1625 - Reflect Band (nm) - - 1645 - 1655 - IL (1260nm – 1360nm) (dB) P/S - - 1.0/1.5 IL (1460nm – 1600nm) (dB) P/S - - 1.0/1.5 IL (1600nm – 1625nm) (dB) P/S - - 3.0/3.4 IL @ Reflect Band - 21 - - RL (1260nm – 1360nm) (dB) P/S 35/30 - - RL (1460nm – 1580nm) (dB) P/S 33/28 - - RL (1580nm – 1620nm) (dB) P/S 25/25 - - RL (1620nm – 1625nm) (dB) P/S 20/20 - - RL @ Reflect Band (dB) - - - 1.0 Max Optical Power (dBm) 27 - - Plug Times - 500 - - Operation Temperature (℃) - -25 - 70 Operation Humidity (RH) - 5 - 95 Storage Temperature (℃) - -40 - 85 Connector SC, LC T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know about ts communication? Please contact us.

Along with passive optical components, active optical components are indispensable elements of an optical network. T&S Communications adopts unique technologies and get itself well-equipped with advanced production lines and independent test platform to deliver highly reliable AOC and fiber optical transceiver which is of good compatibility. AOC (Active Optic Cable) AOC is a cabling technology that accepts the same electrical inputs as a direct attach cable, but uses optical fiber "between the connectors". AOC uses electrical-to-optical conversion on the cable ends to improve speed and distance performance of the cable without sacrificing compatibility with standard electrical interfaces. As a leading AOC manufacturer, T&S AOC cable assemblies are designed in to meet needs for high-density cabling interconnect systems like data centers, and high-performance computing application. DAC (Direct Attach Cable) T&S Direct Attach Cable (DAC) is a high-speed, cost-effective alternative to an optical transceiver or Active Optical Cable (AOC) in data centre applications when the transmission distance is within 7m. Each DAC product includes an EEPROM providing product information, which can be read by the host system. It has premium s parameter and impedance parameter control with automatic production, so that the DAC solution provides an energy-efficient connection for short-distance interconnection, and achieves higher port bandwidth, density and configurability with low cost and lower power consumption. Rigorous cable production testing ensures the best out-of-the- box installation experience, product performance and durability. Fiber Optical Transceivers As a leading fiber optical transceiver manufacturer, T&S Communication supplies a full range with all-round categories from 10Gb/s to 100Gb/s optical transceivers in terms of transmitting rates. Transceivers we offer are compatible with the most majority of mainstream devices on the market. There are diverse options on reach distance, bandwidth, transmitting rate, compatibility, expandability, and the like for your network. T&S transceivers arrive pre-coded and ready to deploy, delivering a confident solution that is fully compatible with your network's hardware and works well with good technical performance. T&S Communication optical transceiver modules arrive not only ready to deploy but also ready to revolutionize and simplify your on-hand inventory needs by minimizing cost without compromising quality based on our fast delivery and response. In fact, we even go so far as to ensure our transceivers have the WDM options you need to maximize the value of each fiber in your configuration. In addition, digital optical monitoring (DOM) support is also available when needed, providing real-time operating parameter reporting. T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

AOC (Active Optical Cable) The T&S Communication Active Optical Cables (AOCs) achieve high data rates over long reaches, using a fraction of the power of other brands while providing streamlined installation for high-performance computing and storage applications. As a professional AOC factory in China, T&S offers a wide range of active optical cables with different specifications at good prices. Feel free to contact us at any time! AOC Application Infiniband FDR/EDR Fiber channels with different specifications High-performance computing interconnect Ethernet, Datacenters Produced by T&S, a mature AOC factory, our active optical cable series can be applied to various occasions. FAQs of Active Optical Cable What is CWDM4 MSA? CWDM4 MSA is a general specification for low-cost 100g optical interface, 2km in data center application. CWDM4 MSA alliance was jointly launched by Avago, Finisar, JDSU and Oclaro on March 31, 2014. Four 25gbps signals are used and multiplexed to two single-mode optical fibers by CWDM. IEEE 802.3bj kr4 RS FEC technology is adopted. CWDM MSA said the release of the standard has collected feedback from more than 40 companies, including system OEMs, optical module manufacturers, chip manufacturers, fiber optic cable manufacturers, etc. At present, members of cwdm4 MSA alliance include: Avago Technologies Brocade ColorChip Finisar HiLight Semiconductor Ltd Hitachi Metals II-IV Incorporated JDSU Juniper Networks Kaiam Mitsubishi Electric NeoPhotonics Oclaro , Oplink SiFotonics Skorpios Technologies Sumitomo Electric What is LWDM？ The full name of lwdm is Lan WDM, which usually refers to a wavelength range dense WDM technology in 100g optical modules. According to the wavelength defined by IEEE 802.3, the wavelength of LAN WDM mainly covers 10km. The wavelength is 1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm. What is pam4 technology? Pam4 is a kind of PAM (pulse-amplitude modulation) modulation technology, namely fourth-order pulse amplitude modulation. PAM signal is a popular signal transmission technology after NRZ (nonreturn to zero). NRZ signal uses high and low signal levels to represent 1 and 0 of digital logic signal. Each clock cycle can transmit 1 bit of logic information. Pam4 signal is transmitted by four different signal levels, and each clock cycle can transmit 2-bit logic information, namely 00, 01, 10, 11. Therefore, under the same baud rate, the bit rate of pam4 signal is twice that of NRZ signal, the transmission efficiency is doubled, and the cost can be effectively reduced. What kind of SFPs? SFP, small hot pluggable module. Finger sized transceivers are suitable for many different rates and protocols, including multimode fiber, single-mode fiber, copper wire, and multi-wavelength interfaces for WDM systems. In a pluggable transponder, a pluggable network card is used to transmit a specific wavelength of WDM. T&S Communications is one of professional fiber optic accessories suppliers. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

JHD PLCCENTER IMPORT & EXPORT CO., LIMITED Add : Room252 NO38 Tianhuroad,SiMingDistrict,XiaMen City,China QQ : 2392596973 Post Code : 361001 Email : kim_jhd1688@163.com sarahjld1688(@163.com  , Whats:15759861556 Web : www.jld-electronics.com 1747-L552   1747L552  1756-L63 1756L63  1756-L61  1756L61 1756-IT6I  1756IT6I  1756-IH16ISOE   1756IH16ISOE 1756-L63  1756L63 1762-IF2OF2  1762IF2OF2  1762-L40bwar 1762L40bwar 1756-L63  1756L63 1756-L72  1756L72 1756-RM   1756RM 1747-L531 1747L531 1746-ITB16  1746ITB16 1746-IB16   1746IB16  1746-OB1 , 6  1746OB16 1746-OA16   1746OA16 JHD PLCCENTER IMPORT & EXPORT CO., LIMITED Add : Room252 NO38 Tianhuroad,SiMingDistrict,XiaMen City,China QQ : 2392596973 Post Code : 361001 Email : kim_jhd1688@163.com sarahjld1688(@163.com  , Whats:15759861556 Web : www.jld-electronics.com

3 YoGa Laptop, Touchscreen Rotating 360 Degrees, Memory 4G DDR 32/64GB, Apollo N3350/N3450/N4200 CPU Yoga Touchscreen Laptop has muliti Mode, stand mode, tablet mode, laptop mode, tents mode, PC mode. It is more convenient to meet different use. High performance and also be light and thin. It is portable. Longer duration of battery to meet working and entertaining. A variety of configurations for choice, support customer customization. Specification CPU Apollo Lake N3350/N3450/N4200 Touch Panel G+G Camera 2+5M Camera Memory 4G DDR ,32/64GB O.S Windows 10 Display 10.1 1280 x800 IPS 1920x1200 FHD optional WIFI B/G/N(AC WIFI is optional), BT 4.0 Size 277.3x190x17.2mm Battery 8000mAh I/O USB 3.0 ,Micro HDMI, DC slot ,3.5mm audio jack, Micro SD card slot Case Plastic 360 Degree Rotating Yoga Touch Screen Laptop Memory 4G DDR 32GB 64GB Apollo N3350 N3450 N4200 0

8 Cores / 16 Threads
3.60 GHz up to 5.00 GHz / 16 MB Cache
Compatible only with Motherboards based on Intel 300 Series Chipsets
Intel Optane Memory Supported
Intel UHD Graphics 630

Minimum Order: 1 bags

Intel 10th Generation Core i7-10510U Quad-Core (4 Cores, up to 4.9 GHz with Intel Turbo, 8 MB Cache) 14.0" FHD (1920x1080) IPS Touch Screen 32GB DDR4 Memory 512GB PCIe NVMe M.2 Solid State Drive Windows 10 Professional (Win 10 Pro 64-bit), 3-Year Lenovo Worldwide Warranty

Minimum Order: 1 bags