Chemicals & Plastics

White or slightly yellow flake or powdery material. Properties: This product is insoluble in water. Use and performance: The DL-8 PVC stabilizer produced by our company is a lead salt stabilizer. It has excellent stability performance, good static thermal stability, Congo red test index ≥ 180 minutes, no pores in granulation and wire drawing, no moisture absorption, and no strong acid or alkaline content. Substance, does not corrode metal wires, the finished product is brightly colored, full in color, white in the initial stage, good in brightness, and has excellent insulation properties. It can meet the specifications of 70°C, 90°C, and 105°C cable materials at the same time. It is a cable material Excellent option for processing.

Industrial grade petroleum jelly is a solid hydrocarbon based grease with good lubricity, chemical stability, water resistance and corrosion resistance, and has a wide range of uses, mainly including the following: Lubrication and friction reduction Lubrication of mechanical equipment: under the condition of temperature not higher than 45℃ and not much load, it can be used as the grease of light load machinery to reduce the friction and wear between mechanical parts. Lubrication of zipper and slide rule: it can effectively reduce the friction resistance of zipper and slide rule and make them slide more smoothly. Protection and anti-corrosion Metal antirust: It can be coated on the surface of metal products, metal parts and machinery to form a layer of protective film to prevent metal from rusting. For example, it is applied to corrosion-prone metal jewelry, non- stainless steel knives and gun barrels before storage. EQUIPMENT PROTECTION: Can be used in taps or equipment that require regular repair and maintenance, such as transmission lines, split tees installed for HOT TAP operation, or valves where polyurethane insulation is damaged or cannot be buried. Release and molding Mold Release Agent: Used as a release agent for plaster molds and castings, also used for die casting and mold release. Modeling Clay: Part of a hydrocarbon mixture used to make modeling clay that does not dry out like Play-Doh. Other Uses Rubber softeners and tackifiers: Can be used in the manufacture of rubber products to make rubber softer and increase its tackiness. Wood protection: can be used for finishing and protecting wood, such as mineral oil polishing. Cable Filling Paste: Used as raw material for industrial products such as cables to fill cables and prevent water from entering the cables. Emulsifying materials for explosives: can be used as emulsifying materials for the production of explosives. Anti-foaming and releasing agents: can be used as an anti-foaming agent to hinder the formation of foam in industrial process liquids, and as a releasing agent to prevent other materials from bonding to surfaces.

PVC ball valve is a valve made of PVC material, mainly used to cut off or connect the medium in the pipeline, and can also be used for fluid regulation and control. Products include: ball valve, octagonal ball valve, general ball valve, internal and external screw octagonal ball valve, dual directional integrated valve, single oil cooled ball valve, internal and external screw black valve, etc. Product features: 1.Environment friendly, non-toxic,Weathering & Abrasion resistance & excellent chemical resistance 2.Light and union ends make easy installation,Leakproff operation; 3.Soft colors & Compact design,Customer's design & logo,Small order acceptable. 4.Economic as cheaper transport charges & long working life,Well and high quality control. 5.Widely used in building,irrigation,industry and swimming pool. Application scope: agricultural irrigation water engineering, construction water engineering, swimming pool water treatment, aquaculture water engineering, etc.

PVC layflat hose is designed for light and heavy duty applications,the hoses are most commonly used in agricultural equipment where continuous water flow through irrigation systems is required. Other appliaction include water pump, pool & spa, construction, mines and marine. It is ideal for agricultural purpose such as farm irrigation ( water delivery and water drainage in the farm). It helps to increase agricultural productivity and farm incomes through better on-farm irrigation and water management. Drip irrigation is an irrigation way which saves water and fertilizer by allowing water to drip slowly to the roots of plants, either onto the soil surface or directly onto the root zone, through a network of pipe/hose, valve, tubing and emitters. Drip Irrigation Hose Features: Made of Recyclable & Non-toxic material, Polyethylene,Light weight,Good flexibility. Environmental friendly and Non-toxic,Non-smell. High tensile strength, resistant to corrosion,anti-aging. High impact resistance,Burst pressure 3 times working pressure. Easy to carry and install in the field,Easy handle & storage. Storage duration lasting for 10 year Anti-UV for longer life span

PE layflat hoses are used for irrigation and low pressure water supply in general industry, construction conveyance and discharge water. It is ideal for irrigation at low pressure connected with thin wall irrigation pipes. PE lay flat hose is suitable for uneven farms. Its weight is much lighter than rigid PE pipe and PVC lay flat pipes. The range of our products are 32- 152mm.Thickness and length is according to customer’s requirements. Application: PE layflat hose is used for shallow root row crops( strawberries,tomatoes, broccoli, celery, tomatoes, vegetables, etc,);Deep-rotted row crops(watermelon, grape, cantaloupe, zucchini, pepper,etc); Perennial planting crops (tobacco, asparagus,lily flower,papaya, banana,etc); edible fungus, cotton, nursery, flowers, filed crops, desert afforestation;suitable for greenhouse cultivation. Characteristic: Made of non-toxic and recyclable materials, polyethylene.  Anti-crossing and anti-aging, shelf life for more than 10 years. High tensile strength and high impact resistance. Flexible and easy to carry and install in the filed, low coat, cost saving. Anti -ultraviolet radiation ,prolong life.

Drip Tape with Continuous Strip In-line is composed of PE tape and embedded continuous strip. The continuous strip is fused with the tape to form a main flow channel and a irrigation drip channel. The part of the channel and the tape are not completely combined to constitute the water inlet and outlet section, and the part between the inlet and outlet is a comb like turbulent flow channel. The connection of PE tape and continuous adhesive strip is joint less by special technology. Features: 1.The scientific design of water channel guaranteed the stable and uniformity of flow rate. 2.Equipped with filter net for dripper to prevent clogging 3.Anti-agers to prolong service time 4.Closely welded between dripper and drip pipe,good performance. 5.Exclusive continuous filtration channel keeps the debris away from the flow path and allows it to purge by flushing, ensuring high performance and extends the life of the tape. 6.Longer flow path ensures true drip flow without squirts.

Drip tape with flat dripper In-line is a special irrigation tool for precise,slow,even and continuous small quantities water drops application to partial root-zone.Through a very small outlet, water is evenly and slowly dripped into the soil near the crop roots, providing sufficient nutrients and water.which own advantages of saving water, combination of irrigation and fertilization,reduction of labor force and high irrigation efficiency etc. Features: We can provide complete specifications of drip tape to meet a variety of customer needs. Our drip tape quality is stable,providing precision irrigation with the lowest breakage rate. We own 10 sets of new model drip tape production line,which can promise best delivery time. We can provide most competitive price by controlling the lowest production cost. After-sales service is guaranteed,we protect every customer`s profit. Product parameters: Diameter(mm) Wall Thickness (mm) Spacing(cm) Flow Rate(L/H) Working Pressure(Bar) Roll Length(m) 16 0.15/0.16/0.18/0.2/ 0.3/0.4/0.5/0.6 10/15/20/30/40/60/ customize 1.38/2.0/2.75/4.0 0.8-2.5 500/1000/2000 /customize 20 0.15/0.16/0.18/0.2/ 0.3/0.4/0.5/0.6 10/15/20/30/40/60/ customize 1.38/2.0/2.75/4.0 0.8-2.5 500/1000/2000 /customize

PDLC Liquid Crystal Mixture QYPDLC-421 Established in 2007, Qingdao QY Liquid Crystal Co., Ltd is a leading manufacturer specializing in high-quality nematic liquid crystals, primarily used in PDLC smart film and high grade of LC display. With over 18 years of nematic liquid crystals production expertise. Our LCs are widely exported to Europe, the United States, South Korea, and other global markets. The capable of our producing approximately 5000 kilograms per month. We signed the Exclusive Agency Agreement with our South Korean customer from 2011

Minimum Order: 20 square metres

Solico Tanks: A Legacy of Innovation, Durability, and Sustainable Water Storage With nearly six decades of experience, Solico Tanks has established itself as a global leader in the design and manufacture of GRP (Glass Reinforced Plastic) sectional water tanks. Operating from a state-of-the-art 400,000 sq. ft. facility in Dubai, Solico leverages advanced Hot Pressed SMC (Sheet Molding Compound) technology to produce high-strength, corrosion-resistant tanks known for their exceptional durability and long-term reliability. Tailored Solutions for Every Scale and Sector Solico offers a broad range of tank capacities, from 1,000-liter units ideal for domestic use to 15 million-liter systems designed for large industrial and municipal projects. These tanks are fully customizable to meet the unique demands of residential, commercial, industrial, and infrastructure applications, ensuring maximum efficiency and adaptability in any environment. Space-Efficient, Innovative Designs Solico’s engineering expertise enables the creation of modular tanks in various shapes—such as C, U, L, T, H, and O—allowing seamless integration into sites with challenging spatial constraints. Height configurations range from 0.5 meters to 6 meters, with ongoing research pushing the boundaries toward 10-meter-tall tanks to meet evolving market needs. Engineered for Harsh Conditions Solico’s tanks are built to withstand extreme climates, seismic activity, and demanding operational conditions. Through rigorous quality testing, including collaboration with Bridgestone Japan, the company ensures every product meets the highest standards of performance, longevity, and safety. Strategically located for efficient logistics, Solico ensures quick delivery and responsive customer support for projects worldwide. Committed to Sustainability Sustainability is central to Solico’s operations. The company utilizes solar-powered manufacturing and environmentally responsible production processes. Tanks are manufactured using premium ISO-NPG resins, providing excellent UV and chemical resistance, making them safe for potable water storage and reducing long-term environmental impact. The Solico Advantage Extensive capacity range from 1,000 to 15,000,000 liters Customizable configurations for limited and irregular spaces Hot Pressed SMC technology for superior mechanical strength Corrosion-free, UV-resistant, and eco-friendly materials Rapid delivery, expert consultation, and global service capabilities Solico Tanks continues to set industry benchmarks in water storage innovation, offering reliable, sustainable, and customized solutions to support modern infrastructure and global water management challenges.

Minimum Order: 6 gallons

Micro crystalline wax has the characteristics of good luster, high melting point and light color. It has compact structure and good flexibility. It can melt with various natural waxes, improve the melting point of its low wax and improve the performance of coarse wax. Usages: 1. Microcrystalline wax can be used to make candles. 2. Microcrystalline wax can be used to make crayons. 3. Microcrystalline wax as coating material in solid preparation, including sustained-release preparation. 4. Microcrystalline wax can also be used in food and cosmetics. 5. Microcrystalline wax is used as hardener in cream and ointment. 6. Microcrystalline wax is used as thickener in lubricating grease. 7. Microcrystalline wax can be used as packaging formulation and coating agent in electrical industry. Properties Properties Unit 65# 70# 75# 80# 85# 90# Melting point ºC 63-68 69-74 70-80 72-82 78-83 89-91 Oil Content %wt Max.13 Max.20 Max.10 Max.10 Max.10 Max.3 Viscosity ºC 6-9 18-23 15-20 10-20 15-20 13-20 Flash point ºC - Min.240 Min.200 - Min.200 Min.200 Colour cSt Max.L1.5 Max.L5 Max.L1.5 Max.L3 Max.L4 Max.L2

Minimum Order: 1 bags

Fischer Tropsch wax is mainly composed of linear and saturated high carbon alkanes with relative molecular weight of 500-1000, which gives this chemical fine crystal structure, high melting point, narrow melting point range, low oil content, low penetration, low mobility, low melting viscosity, hardness, wear resistance and high stability. Usages:These products are widely used in textiles,plastics industry,Ink and coating,adhesive. Properties Pro , perties Unit SYY-52 SYY-60 XTFT-70 XTFT-80 SYY-90 SYY-95 SYY- 100 XTFT-105H SYW-115 Melting point ℃ ≥53 ≥62 74-78 80-86 ≥90 81-101 82- 102 102-103 112.5-117 Penetration 0.1mm/100g 5s at25℃ ≤50 ≤25 10-18 10-18 ≤10 ≤5 ≤4 12.2 ≤1 Oil content % ≤15 ≤7 <4 1-3 ≤5 ≤1 ≤1 ≤0.2 ≤0.5

1.Beeswax is a natural wax produced by honey bees of the genus Apis. The wax is formed into scales by eight wax-producing glands in the abdominal segments of worker bees, which discard it in or at the hive. The hive workers collect and use it to form cells for honey storage and larval and pupal protection within the beehive. Chemically, beeswax consists mainly of esters of fatty acids and various long-chain alcohols. 2.Beeswax has been used since prehistory as the first plastic, as a lubricant and waterproofing agent, in lost wax casting of metals and glass, as a polish for wood and leather, for making candles, as an ingredient in cosmetics and as an artistic medium in encaustic painting. 3.Beeswax is edible, having similarly negligible toxicity to plant waxes, and is approved for food use in most countries.

1.Beeswax is a natural wax produced by honey bees of the genus Apis. The wax is formed into scales by eight wax-producing glands in the abdominal segments of worker bees, which discard it in or at the hive. The hive workers collect and use it to form cells for honey storage and larval and pupal protection within the beehive. Chemically, beeswax consists mainly of esters of fatty acids and various long-chain alcohols. 2.Beeswax has been used since prehistory as the first plastic, as a lubricant and waterproofing agent, in lost wax casting of metals and glass, as a polish for wood and leather, for making candles, as an ingredient in cosmetics and as an artistic medium in encaustic painting. 3.Beeswax is edible, having similarly negligible toxicity to plant waxes, and is approved for food use in most countries.

The main uses of polyphenylene ether include： 1 Electronic and electrical fields: Polyphenylene ether is widely used in the manufacture of shells for electronic equipment such as televisions, computers, facsimile machines, photocopiers and so on. 2 Automotive industry: In the automotive industry, polyphenylene ether is used in the manufacture of instrument panel parts, window frames, shock absorbers and other parts. 3 Mechanical industry: Polyphenylene ether is also used in the manufacture of gears, bearings, pump impellers and other mechanical parts. 4 Medical Devices: Due to its excellent dimensional stability, low creep, high insulation, etc., polyphenylene ether is also used in the manufacture of medical devices, which can withstand steam sterilization. 5 Precision instrument frames, boxes, covers, etc.: Polyphenylene ether is used in precision instrument frames, boxes, covers and other green engineering applications, such as liquid crystal displays represented by the The frame of flat panel display. 6 LED shading material: Polyphenylene ether is also used in the production of light-emitting diode (LED) shading material, especially in electronics, automotive, communications and optical systems.