Chemicals & Plastics

TristyrylPhenol Ethoxylates Ethoxy Polyarylphenol Polyethylene glycol mono-ether (Tristyrylphenyl) CAS number:99734-09-5 Commodity Code:34021300.90 Molecular formula:C30H24O.N Chemical Code:CC5-CZ40 Performance and Use: 1.Light yellow liquid or white cream. At low temperatures, it becomes solid. 2.Dissolve in water and a variety of organic solvents. 3.It has good emulsification, decontamination and moisturizing ability. It is an important hydrophilic group of compound agrochemical emulsifier.

Minimum Order: 1 bags

Calcium Dodecylbenzene Sulfonate H.S code 3402.11.90 Calcium Dodecylbenzene Sulfonate CAS NO.: 26264-06-2 Molecular weight: 691.05 Molecular formula: C36H58CaO6S2 EINECS no.247 - 557 - 8 Customs code :340211 Performance and Use: 1. CaDDBS is a yellow to brownish transparent viscous liquid. 2. Soluble in methanol, toluene, xylene and other organic solvents. 3. It is a lipophilic component in agricultural emulsifiers. It can be combined with a variety of non-ionic surfactants, mixed into agricultural emulsifiers. Can be used to prepare pesticides, fungicides, herbicides.

Minimum Order: 1 bags

TristyrylPhenol Ethoxylates Ethoxy Polyarylphenol Polyethylene glycol mono-ether (Tristyrylphenyl) Chemical Composition: Tristyrylphenol ethoxide + 15 EO, 16 EO, 19 EO, 20 EO, 25 EO, 29 EO, 36 EO, 54 photoelectric CAS NO. :99734-09-5 Commodity Code :34021300.90 Molecular formula :C30H24O. N Chemical Code :CC5-CZ40 Performance and Use: 1. Light yellow liquid or white cream. At low temperatures, it becomes solid. 2. Dissolve in water and a variety of organic solvents. 3. It has good emulsification, decontamination and moisturizing ability. It is an important hydrophilic group of compound agrochemical emulsifier.

Minimum Order: 1 bags

Tristyrylphenol Ethoxylates Synonyms: Tristyrylphenol Ethoxylates Ethoxylated Polyarylphenol Polyethylene Glycol Mono(Tristyrylphenyl)Ethers Chemical Composition: Tristyrylphenol Ethoxylate+15EO,16EO,19EO,20EO,25EO,29EO,36EO,54EO , CAS No.:99734-09-5 HS Code: 34021300.90 Molecular Weight: Not available. Molecular Formula: C30H24O.(C2H4O)n Chemical Code: CC5-CZ40 EINECS No. Not available. Structural Formula: Not available. Properties and Uses: 1. Light yellow liquid or white cream. It becomes solid when the temperature is low. 2. Soluble in water and many kinds of organic solvents. 3. It has good emulsification, decontamination and moisturizing capacity. And it is an important hydrophilic group for compound agrochemical emulsifier. Packing and Transport: This product is flame resisting and nontoxic which can be shipped as an ordinary chemical product. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc… Storage: Quality guaranty period for the product is 1 year. Should be stored in dry and ventilated place. Quality Specifications: Type Appearance Water Percentage PH Value Cloud Point(°C) Remarks 601# Light yellow oily liquid ≤0.5% 5.0-7.0 60-65 1% H2O 602# Light yellow liquid or semi liquid ≤0.5% 5.0-7.0 80-85 1% H2O 603# Light yellow or white solid ≤0.5% 5.0-7.0 90-95 3% NaCl 604# Light yellow liquid or semi liquid ≤0.5% 5.0-7.0 54-56 1% H2O 605# Light yellow liquid or semi liquid ≤0.5% 5.0-7.0 70-75 1% H2O

Minimum Order: 1 bags

Calcium Dodecylbenzene Sulfonate H.S code 3402.9000 Calcium Dodecylbenzene Sulfonate CAS NO.: 26264-06-2 CAS 68953-96-8、68584-23-6 Molecular weight: 691.05 Molecular formula: C36H58CaO6S2 EINECS no.247 - 557 - 8 Customs code :340290 Performance and Use: 1. CaDDBS is a yellow to brownish transparent viscous liquid. 2. Soluble in methanol, toluene, xylene and other organic solvents. 3. It is a lipophilic component in agricultural emulsifiers. It can be combined with a variety of non-ionic surfactants, mixed into agricultural emulsifiers. Can be used to prepare pesticides, fungicides, herbicides.

Minimum Order: 2100

PFA, perfluoroalkoxy resin, is a special polymer material. In laboratories, PFA gas washing bottles are often used for gas purification and drying. Because its inner wall is smooth and difficult to adsorb gas molecules, it can effectively remove impurities and moisture in the gas and ensure the accuracy of experimental results. In petrochemical, semiconductor manufacturing, environmental protection and other industries, PFA gas washing bottles are widely used for gas pretreatment to ensure gas quality during the production process. In addition, PFA gas washing bottles are often used for gas storage and transportation. Due to its material characteristics, PFA gas washing bottles can maintain good performance in high or low temperature environments, ensuring gas stability and safety. #reactionbottle #gaswashingbottle #gascleaning #gaspretreatment

The PFA separatory funnel is mainly used in solid-liquid or liquid-liquid reaction experiments to control the amount of liquid added and the reaction rate, as well as material separation and purification, and to separate the two immiscible liquids formed after extraction. #separatoryfunnel #Solublepolytetrafluoroethylene #ICPMS #ICPOES #traceanalysis

PFA material is resistant to chemical corrosion, has the lowest friction coefficient among plastics, and has good electrical properties. Its electrical insulation is not affected by temperature.Available in sizes from 30ml to 5000ml or even larger. Large size bottle mouth specifications are GL32, GL45, GL60, etc. #reagentbottle #samplingbottle #labware #teflon #ICPMS

The surface is treated with imported high-purity PFA anti-corrosion non-stick coating. It is a professional experimental hotplate for sample heating, digestion, evaporation, boiling and acid removal.#samplepreparation

1. Product introduction The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning flower baskets or wafer cassettes with chip silicon cells. Due to the characteristics of PFA, it can withstand the corrosiveness of cleaning solutions. At the same time, it has a low blank value of metal elements, no dissolution or precipitation, and will not contaminate chip wafers. Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination. 2. Features: 1. The appearance is translucent, making it easy to observe the reagents in the tank; 2. High and low temperature resistance: -200～+260℃ 3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents; 4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb; 6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.; 8. Stable chemical properties, good recoverability, and not easy to deform; 9. Teflon plastic, durable and not fragile. web: https://www.njbinglab.com

Product Name: 2-BROMO-1-PHENYL-PENTAN-1-ONE Cas NO: 49851-31-2 Molecular Formula: C11H13BrO Boiling Point: 282.267℃ at 760 mmHg Flash Point: 42.513°℃ Aliase: CAS 49851-31-2 high quality 2-BROMO-1-PHENYL-PENTAN-1-ONE 2-bromo-1- phenylpentan-1-one Purity: 99.99% Appearance:Liquid

Product Name: Tetra caine hydrochloride CAS No.: 1451-82-7 English Nickname: 4-(Butylamino)benzoic acid 2-(dimethylamino)ethyl ester,Ameth /Tetra caine HCl /MFCD00038912 / PANTOCAINE / gingicainm Boiling Point: 389.4oC at 760 mmHg Melting Point(oC): 149°C Molecular Formular: C15H25ClN2O2 Molecular weight: 300.824 Flash Point: 189.3oC Appearance: White or off-white crystalline powder Vapor pressure: 2.87E-06mmHg at 25°C

PFA acid purification system: 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased. web: https://www.njbinglab.com

Professionally customize PTFE/PFA developing wafer basket and etching wafer basket. Made of polytetrafluoroethylene, acid and alkali resistant, not suitable for breakage, and can be used for a long time. Can add a base and put in a PTFE rotor to enhance liquid fluidity. Can be customized according to wafer size and quantity. Used for etching and development in semiconductor processes.