Chemicals & Plastics

1. Product introduction The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning flower baskets or wafer cassettes with chip silicon cells. Due to the characteristics of PFA, it can withstand the corrosiveness of cleaning solutions. At the same time, it has a low blank value of metal elements, no dissolution or precipitation, and will not contaminate chip wafers. Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination. 2. Features: 1. The appearance is translucent, making it easy to observe the reagents in the tank; 2. High and low temperature resistance: -200～+260℃ 3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents; 4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb; 6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.; 8. Stable chemical properties, good recoverability, and not easy to deform; 9. Teflon plastic, durable and not fragile. web: https://www.njbinglab.com

Product Name: 2-BROMO-1-PHENYL-PENTAN-1-ONE Cas NO: 49851-31-2 Molecular Formula: C11H13BrO Boiling Point: 282.267℃ at 760 mmHg Flash Point: 42.513°℃ Aliase: CAS 49851-31-2 high quality 2-BROMO-1-PHENYL-PENTAN-1-ONE 2-bromo-1- phenylpentan-1-one Purity: 99.99% Appearance:Liquid

Product Name: Tetra caine hydrochloride CAS No.: 1451-82-7 English Nickname: 4-(Butylamino)benzoic acid 2-(dimethylamino)ethyl ester,Ameth /Tetra caine HCl /MFCD00038912 / PANTOCAINE / gingicainm Boiling Point: 389.4oC at 760 mmHg Melting Point(oC): 149°C Molecular Formular: C15H25ClN2O2 Molecular weight: 300.824 Flash Point: 189.3oC Appearance: White or off-white crystalline powder Vapor pressure: 2.87E-06mmHg at 25°C

PFA acid purification system: 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased. web: https://www.njbinglab.com

We have a large stock of bdo 1,4-Butanediol in our Australia/Canada/USA warehouse, 99% Purity BDO with factory prices and safe delivery. CAS 110-63-4 BDO Australia Canada USA Stock 2-4 days arrive. No signature!! VERY SAFE! Order 1,4-Butanediol in AU/CA/US, ship locally, arrival in 2–3 days! Provide 1L sample! BDO (cas 110-63-4) ships to other countries and ships from China, such as New Zealand, Russia, the Netherlands, Sweden, Germany, Belgium, Norway, the United Arab Emirates, etc., and it takes 8-15 days.

Minimum Order: 1 bags

Hot sale in AU!! No signature! AU STOCK 2-3 DAYS delivery We have a large stock of 1,4-Butanediol in our Australian warehouse, CAS 110-63-4 with beautiful prices and good quality. Please contact me immediately to order bdo(1,4-Butanediol)! BDO oil arrive in 2-3 days!

Professionally customize PTFE/PFA developing wafer basket and etching wafer basket. Made of polytetrafluoroethylene, acid and alkali resistant, not suitable for breakage, and can be used for a long time. Can add a base and put in a PTFE rotor to enhance liquid fluidity. Can be customized according to wafer size and quantity. Used for etching and development in semiconductor processes.

Can meet the low detection limit requirements of ICP-OES and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. The main body of the equipment is made of high-purity PTFE and PFA, and the container in contact with the acid reagent is made of imported PFA material. , lower background, no corrosion, no pollution, can handle HNO3, HCL, HF and other commonly used acids in laboratories. Experiments have shown that after a single distillation of an acid with a metal impurity content of about 10PPB, the metal impurity content can be reduced to about 0.01PPB. If the acid requirements are higher, the purification times can be increased. It is often used to extract high-purity acid in Ultra clean laboratories, trace analysis laboratories, geochemistry, marine systems, geology and minerals, geological brigade, polysilicon, materials and other industries. #Geochemistry #ICPMS #acidpreparation #acidpurification #traceanalysis

Made of Teflon plastic with screw cap. The cap and nozzle are formed in one piece and are not easy to break. The cleaning solution can be added to the bottle to control the sample addition in drops. The surface is smooth and non-sticky. #washbottle #teflonlabware #cleaningvessel #traceanalysis

Advantages of PTFE pagoda joint: 1.Excellent Corrosion Resistance: The pagoda joint crafted from PTFE exhibits superb corrosion resistance, resisting almost all chemicals, including strong acids, bases, and various organic solvents. This ensures its durability and longevity in harsh environments. 2.High Strength and Durability: The pagoda joint, due to its PTFE composition, possesses high strength and durability. Its tight structure and even distribution of stress at connection points allow it to withstand significant loads, ensuring safety and reliability. 3.Smooth Surface and Low Friction: PTFE is known for its extremely low friction coefficient, which results in smooth operation and reduced energy loss during fluid transmission. This smooth surface also aids in easy assembly and disassembly. 4.Excellent Sealing Performance: The pagoda joint made from PTFE provides excellent sealing performance, thanks to its high elasticity and gas tightness. This ensures leak-free connections and reliable fluid transmission. 5.Wide Temperature Range: PTFE maintains its physical and chemical stability over a wide temperature range, from -80°C to +260°C. This allows the pagoda joint to function effectively in extreme temperature conditions. 6.Ease of Installation: Compared to traditional welding and bolting methods, the pagoda joint offers a simpler and faster installation process, reducing both cost and labor.

Minimum Order: 3 bushels

Product Name:1-(benzo[dl[1.3]dioxol-5-y)-2-bromopropan-1-o , ne Cas NO.:52190-28-0 Purity: 99% Usage:Pharmaceutical intermediate Molecular Formula: C10H9BrO3 Flash Point :162.857 Boiling Point :345.673°C at 760 mmHg Aliase:Bromo-3'4'- (methylenedioxy) Appearance:Brown Powder

Product Name：New Pmk Powder/Oil Pmk Ethyl Glycidate CAS：28578-16-7 Molecular formula Pmk: C13H14O5 Purity：97%-99% or Custom Appearance：White Powder Or Yellow Liquid

Butyne glycol ether Product CAS No. Chemical Composition BEO 1606-85-5 Butynediol Ethoxylate BMP 1606-79-7 Butynediol Propoxylate B-100 1606-85-5 Butynediol Ethoxylate B-200 1606-85-5 Butynediol Ethoxylate Product characteristics The structure is specially designed for the hydrosilylation of acetylenic alcohols. The product has high purity and is easy for industrial reactions. Applications It is suitable for the synthesis and preparation of acetylenic alcohol-modified polysiloxane surfactant, which can be used as super wetting agent, defoaming agent and foam suppressor. Packing 200Kg/barrel, stored in cool and dry place Karen Yuan Sales Department Wuhan Bolachem New Material Co., LTD info@bolachem.com​ Whatsapp/Wechat: 008618086413361 Skype: live:chuntian_334455

Minimum Order: 1 bags

Metal corrosion inhibitor PT-PP, PP-PM Product CAS No. Chemical Composition PT-PP 3973-17-9 Propargyl alcohol propoxylate PT-PM 3973-18-0 Propynol ethoxylate Product characteristics This product belongs to acetylenic alcohol polyoxyethylene ethers. As a metal corrosion inhibitor, it is especially suitable for steel, copper, and aluminum substrates. Applications 1. Metal corrosion inhibition protection for acidic cleaning. 2. Metal corrosion inhibition protection for rust and scale removal in acidic systems. 3. Oilfield drilling Karen Yuan Sales Department Wuhan Bolachem New Material Co., LTD info@bolachem.com​ Whatsapp/Wechat: 008618086413361 Skype: live:chuntian_334455

Minimum Order: 1 bags