Other Chemicals

Basic Information: The production process of sponge titanium mainly includes two methods: magnesium reduction distillation method (i.e. Claus method) and sodium reduction distillation method, which are applied in industrial production. The production process of the Claus method is as follows: titanium ore - electric furnace smelting to produce high titanium slag - chlorination to produce titanium tetrachloride - refining and purification to produce refined titanium tetrachloride - magnesium reduction - distillation to produce sponge titanium - finished product crushing and packaging. The produced sponge titanium still needs to be melted and cast into titanium ingots (or titanium alloys) in a vacuum arc furnace, and then forged or rolled into corresponding pipes, plates, or wires in order to be applied in industry. Application： Ａerospace structural parts, aerospace rotor parts Characteristics: 　The quality is stable, the composition is uniform, the particle size distribution range is reasonable, the packaging density is less than 1.5g/cm³, and the specification is 2----12.7 mm. In the field of aerospace and military industry, the market share continues to lead.

Minimum Order: 20 square metres

Introduction Sodium chloride is an ionic compound with the chemical formula Na Cl. It is a colorless cubic crystal or a fine crystalline powder with a salty taste. The appearance is white crystal, and its source is mainly seawater, which is the main component of table salt. Soluble in water, glycerin, slightly soluble in ethanol (alcohol), liquid ammonia; insoluble in concentrated hydrochloric acid. Impure sodium chloride is deliquescent in air. [1] The stability is relatively good, and its aqueous solution is neutral. Industrially, the method of electrolytic-ally saturated sodium chloride solution is generally used to produce hydrogen, chlorine and caustic soda (sodium hydroxide) and other chemical products (commonly called chlor-alkali industry). It can be used in ore smelting (electrolytic melting of sodium chloride crystals to produce active metal sodium), medically used to configure physiological saline, and daily life can be used for condiments. Basic Information Product Name: Sodium Chloride Other Name: Industrial Salt MF:Na cl CAS No.:7647-14-5 EINECS No.:231-598-3 Apearance: White Crystal Molar Mass: 57.4474 g/mole Inspection Standard: GB/T5462-2015. Application: Basic chemical raw material.Mainly used in the production of soda and caustic soda,glass,leather,fine chemical products etc. Transportation and storage: It should be stored in dry,ventilated and clean storeroom,not outdoor storage;Avoid sun and rain during transportation.Keep away from moisture and sunshine ,the packing should be handled lightly to prevent the packing from being damaged during loading and unloading,the storage should be separated from toxic and harmful substances. Guarantee period: 3 years Package:50kg/bag,25kg/bag,1000kg/bag

Minimum Order: 20 square metres

Introduction: Artificial Rutile is also called Synthetic Rutile. Its TiO2 content varies from 91% to 96% depending on the processing technology. It is a high-quality substitute for natural rutile. Application: Synthetic Rutile can be used to make high-quality welding electrodes; titanium dioxide can be used to make high-grade white paints, coatings, lightening agents for rayon, white rubber and fillers for high-grade paper. Titanium, titanium metal, enamel products and electrode coatings can also be used to produce artificial rutile yellow pigments.

Minimum Order: 20 square metres

Introduction: High Titanium Slag (High Titanium Slag) is a common name for high-content enrichment of titanium dioxide produced by melting and separating titanium dioxide and iron in ilmenite by means of electric furnace heating and melting. Its main component is TiO2, which usually has 90% and 92% content specifications. It is a high-quality raw material for the production of titanium tetrachloride, titanium and titanium sponge. Main Chemical Composition: TiO2 Appearance: Black Powder Application: to be used to produce titanium tetrachloride, welding rod, titanium dioxide Packing: 25KG/bag, 1 ton/bag, according to customer requirements.

Minimum Order: 20 square metres

PRODUCT DESCRIPTION General Description: ANJEKA-6043 is a polymer dispersant for dispersing pigments in solvent-based coatings. Product Information: Chemical Composition: Hyperbranched polyester compound containing amino anchoring functional groups. The data provided on this sheet are typical values and not technical specifications. Appearance: Light brown fluid Acid Value (mgKOH/g): 10-20 Amine Value (mgKOH/g): 5-15 Density (g/cm³ at 23℃): 1.10-1.25 Viscosity (cps at 25℃): 2500—2800 Non-Volatile Content (%): 98 Storage and Transport: Before use, thoroughly stir the product; separation or oiling off may occur at temperatures below 0℃. Heat to 30℃—40℃ and stir evenly. Storage duration is not recommended to exceed 12 months. Application Guidelines: For use in the coating industry and printing inks. Features and Benefits: 1. Enhancement of Visual Characteristics: Amplifies the shine, vibrancy, and anti-clumping attributes of organic pigments. 2. Reduction of Fogging: Diminishes fogging resulting from uneven dispersion, ensuring a clearer and more consistent appearance. 3. Effective Darkening of Coatings: Particularly potent in intensifying the darkness of coatings, particularly in the dispersion of high-surface carbon black. 4. Process Efficiency Improvement: Contributes to the reduction of milling time, leading to enhanced production efficiency. 5. Increased Coating Stability: Elevates the storage stability of coatings, offering extended durability over time. Application Areas: 1. Coating Industry: Ideal as an additive for dispersing pigments in solvent-based coatings. 2. Printing Ink Sector: Recommended for use in printing inks, ensuring the stability of organic pigments, with a focus on carbon black. 3. Compatibility with Resins: Exhibits compatibility with a variety of resins commonly employed in coatings, including polyester resin, polyurethane resin, and acrylic resin systems. Recommended Levels: Additive levels (as purchased) based on pigment: Organic pigments: 10%—50%. Titanium dioxide or inorganic fillers: 0.5%—2%. Inorganic pigments: 4%—8% Carbon black: 10%—30% High surface carbon black: 40%—80% The above data are empirical amounts; optimal levels should be determined through a series of experiments. Processing Instructions: For optimal performance, add the additive to the grinding medium first and then add the pigment. Packaging: —25kg iron drum —200kg plastic drum Our service: 1. Reply within 24 hours. 2. High-quality products and reasonable price 3.R&D technology support. 4. Professional team service 5. Customiszed production for different package 6. No delay on shipment Our team: Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 0 Our company: Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 1 Hyperbranched Polymer Acrylic Dispersing Agent In Paint Anti Flocculation 2 We are building a new large-scale production base strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022. Benefits to our customers and collaboration partners: • stable large-scale production, better quality control • lower production unit cost Collaboration Opportunities: • contract manufacturing and OEM/ODM collaboration opportunities Our Certifcate&Patents Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 2Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 3 Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 4Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 4Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 6

PRODUCT DESCRIPTION Product Description: Pharmaceutical Anti-Aging Healthcare 98%min CAS 1143-70-0 Urolithin A Urolithin A is a natural compound, a metabolite produced by gut bacteria that metabolizes polyphenolic compounds, such as phytochromes, found in oak bark and berries. It is a compound with potential biological activity. Urolithin A has some potential biological activities, including antioxidant, anti-inflammatory, anti-cancer and anti-aging effects. It may exert its effects through multiple mechanisms, such as promoting mitochondrial bioelectricity, regulating autophagic processes, inhibiting inflammatory pathways, and affecting cell signaling. Technical Parameters: cas 1143-70-0 Name Urolithin A Synonyms 3,8-Dihydroxyurolithin urolithin-A urolithin B Urolithin A MF C13H8O4 Purity 99% Application Urolithin A is an intestinal metabolite of ellagic acid with antioxidant and anti-proliferative effects. The IC50 values of inhibiting T24 and cacO-2 cell growth were 43.9 and 49 μM, respectively. Function: Urolithin A has multiple potential functions and biological activities. Here are some key features of Urolithin A: 1. Antioxidant effect: Urolithin A is a strong antioxidant that can neutralize free radicals and reduce oxidative stress damage to cells. This helps protect cells from oxidative damage and helps maintain cellular health. 2. Promote mitochondrial bioelectricity: Urolithin A can stimulate the production and function of mitochondria, increasing the energy level in cells. This is essential to maintain normal cell function and metabolic processes. 3. Regulating the autophagy process: Urolithin A can promote the autophagy process in cells. Autophagy is an intracellular waste removal and protein degradation mechanism that helps maintain cellular health and delay aging. 4. Anti-inflammatory effect: Urolithin A has anti-inflammatory properties, which can inhibit the inflammatory response, reduce the production of inflammatory mediators and the activation of inflammatory signaling pathways. This has potential benefits for the prevention and alleviation of inflammation-related diseases. 5. Anti-tumor effect: Some studies have found that Urolithin A has an inhibitory effect on certain cancer cells, and can inhibit the growth and spread of tumor cells. However, more research is needed to determine its potential value in cancer treatment. 6. Anti-aging effect: Studies have shown that Urolithin A can regulate the aging mechanism in cells, delay the aging process and promote the longevity of cells. This may be related to its antioxidant and autophagy regulation. Applications: 1. Gut health: Urolithin A may have benefits for gut health. It can maintain the integrity of intestinal mucosa and prevent intestinal inflammation and related diseases such as irritable bowel syndrome by regulating the balance of intestinal flora, promoting autophagy, and reducing inflammation. 2. Cardiovascular health: Some studies suggest that Urolithin A may have beneficial effects on cardiovascular health. It has antioxidant and anti- inflammatory effects, which can reduce oxidative stress and inflammation in the blood, thereby preventing the occurrence and development of cardiovascular diseases. 3. Muscle Health: Urolithin A may have a positive effect on muscle health and athletic performance. Research shows it can boost mitochondrial bioelectricity, improve muscle oxygenation, and improve exercise endurance and muscle function. 4. Bone health: Preliminary research shows that Urolithin A may have some effect on bone health. It can prevent the occurrence of bone-related diseases such as osteoporosis by promoting the normal function of bone cells and increasing bone density. 5. Neuroprotection: Urolithin A may have neuroprotective effects, helping to prevent the development of neurodegenerative diseases, such as Alzheimer's disease and Parkinson's disease. Its antioxidant, anti-inflammatory and autophagy regulation effects may play a positive role in the protection and repair of nerve cells. Packaging and shipping: 1~25kgs packaging: Aluminium bag inside, Carton box outside. 25kgs packaging: Plastic bag inside, Fiber drum outside Pharmaceutical Urolithin A Supplement 0 Company Information: Quickool Chemical Co., Ltd.is a global chemical industry manufacturers and suppliers of pharmaceuticals and intermediates, food and feed additives, and herbal extracts. Every batch of material is checked, Each procedure guarantees the quality; Every bag of our products is top grade, Service is thoughtful all the time, quality and reputation to increase market share and promote enterprise development. The quality, colors and forms of our products have reached a high level in related chemical industry, which relies on characteristic and advanced processing technology and it has gained a high and reliable reputation from customers at both quality and services. Pharmaceutical Urolithin A Supplement 1 FAQ: 1.What's your MOQ? Our MOQ is flexible, usually 10 grams~50 grams for a trial order is acceptable. 2. How to deliver the goods? ≤50kg ship by FedEx/UPS, ≥50kg ship by Air, ≥100kg can be shipped by Sea. If you have special request on delivery, please contact us. 3. What is the shelf life for the products? Most products shelf life 24-36 months. 4. What's your delivery time? Usually, shipment will be made within 1-3 days against confirmed order. 5. How about the validity of the offer? Usually, our offer is valid for 2 week. However, validity might vary between different products.

Supply High quality CAS 20320-59-6 BMK Chemical Oil Diethyl(phenylacetyl)malonate CAS: 20320-59-6 MF: C15H18O5 MW: 278.3 EINECS: 205-854-1 Mol File: 20320-59-6.mol Boiling point 120 °C(Press: 0.01 Torr) density 1.148±0.06 g/cm3(Predicted) pka 8.76±0.59(Predicted) Dear buyer, I'm Annie, a salesperson from Wuhan First New Material Company. We are a factory that has been producing organic intermediates, cosmetic raw materials, plant extracts for more than 10 years. We can offer the best quality at a competitive price. We have the best service delivery and payment methods in the world such as Alipay, T/T, Western Union, Money Gram, cryptocurrencies (Bitcoin, usdt, xmr, etc.). Delivery time: 10-12 days. If you need, please feel free to contact me. Hot selling list: PMK powder/Oil: , 28578-16-7 PMK Ethyl Glycidate Powder B , MK Powder/Oil: 5449-12-7  BMK Powder Glyci , dic Acid  20320-59-6 Diethyl(phenylacetyl)ma , lonate 718-08-1 Ethyl 3-oxo-4-phenylbutanoate , 10250-27-8  2-Benzylamino-2-methyl-1-propano , l BDO/GBL/GHB: 110-63-4 1,4-Butanediol 1 , 10-64-5 2-Butene-1,4-diol 7331-52-4 (S)-3-hyd , roxy-gamma-butyrolactone 5469-16-9 (+/-)-3-HYD , ROXY-GAMMA-BUTYROLACTONE 1451-82-7   2-bromo , -4-methylpropiophenone 1451-83-8  2-bromo-3-m , ethylpropiophenonec 91306-36-4  1,3-Dioxolane , , 2-(1-bromoethyl)-2-(4-methylphenyl) 49851-31 , -2   2-Bromo-1-phenyl-1-pentanone 5337-93-9

Minimum Order: 1 bags

New BMK Glycidic Acid Dear buyer, I'm Annie, a salesperson from Wuhan First New Material Company. We are a factory that has been producing organic intermediates, cosmetic raw materials, plant extracts for more than 10 years. We can offer the best quality at a competitive price. We have the best service delivery and payment methods in the world such as Alipay, T/T, Western Union, Money Gram, cryptocurrencies (Bitcoin, usdt, xmr, etc.). Delivery time: 10-12 days. If you need, please feel free to contact me. Hot selling list: PMK powder/Oil: , 28578-16-7 PMK Ethyl Glycidate Powder B , MK Powder/Oil: 5449-12-7  BMK Powder Glyci , dic Acid  20320-59-6 Diethyl(phenylacetyl)ma , lonate 718-08-1 Ethyl 3-oxo-4-phenylbutanoate , 10250-27-8  2-Benzylamino-2-methyl-1-propano , l BDO/GBL/GHB: 110-63-4 1,4-Butanediol 1 , 10-64-5 2-Butene-1,4-diol 7331-52-4 (S)-3-hyd , roxy-gamma-butyrolactone 5469-16-9 (+/-)-3-HYD , ROXY-GAMMA-BUTYROLACTONE 1451-82-7   2-bromo , -4-methylpropiophenone 1451-83-8  2-bromo-3-m , ethylpropiophenonec 91306-36-4  1,3-Dioxolane , , 2-(1-bromoethyl)-2-(4-methylphenyl) 49851-31 , -2   2-Bromo-1-phenyl-1-pentanone 5337-93-9

Minimum Order: 1 bags

Potassium Aluminium Fluoride is an inorganic salt used in numerous industrial applications. PAF is also known as: Potassium Cryolite, Potassium Tetrafluoraluminate, Kalium Aluminium Fluorid, KAlF, KAlF4/K3AlF6 Potassium Aluminum Fluoride is a commercial purity fused inorganic salt. It has useful properties and is used in a number of industrial applications. The compound is used as salt flux in the smelting of  secondary aluminium to maximize metal recovery, to reduce or remove the magnesium content of liquid aluminium alloys and as filler in the manufacture of abrasives. PAF is also present in additives for the metals industry as a fluxing agent to accelarate dispersion after addition.

Minimum Order: 20 square metres

When magnesite is calcined at 800-1200℃, it is called "light burning", and its product is called light burning magnesium powder, which is called light burning powder for short. Light-burned powder is mainly used to make cementitious materials, heat-insulating and sound-insulating building materials and ceramic raw materials, and it is also an ideal raw material for producing high-density magnesia. After chemical treatment, light-burned magnesium can be made into a variety of magnesium salts, which are used in magnesium sulfate, light magnesium oxide, inorganic glass fiber reinforced plastic, magnesium hydroxide, fire-proof board, magnesia-alumina spinel, light-weight wallboard, greenhouse bracket, ventilation pipeline, fire- resistant cable, magnesite manhole cover, mold, trailer, and so on.

Minimum Order: 20 square metres

Re-burned magnesia is made of natural magnesite and calcined in high temperature shaft kiln. It is the raw material for making bricks and producing unshaped refractories, and the finished products are used for steel making, electric furnace bottom and ramming furnace lining.

Minimum Order: 20 square metres

Fused magnesia is prepared by melting selected grade A natural magnesite or high-purity lightly burned magnesium particles in an electric arc furnace. The product has high purity, large crystal grains, compact structure, strong slag resistance and good thermal shock stability. It is an excellent high- temperature electrical insulation material and an important raw material for making high-grade magnesia bricks, magnesia-carbon bricks and unshaped refractories.

Minimum Order: 20 square metres

Introduction Calcium chloride is an inorganic salt, which exists as solid or liquid. Solid calcium chloride is a white, crystal substance in the form of flake, granule, pellet or powder. With different crystal water content, it can be dihydrate or anhydrous. Liquid calcium chloride is a colorless, clear solution. As calcium chloride has such properties as quick dissolving, exothermic ability, attracting moisture from the air and surroundings, dissolving at very low temperature. Application: 1.Petroleum , : oil field drilling, stabilizing mud layer, lubricating drilling, drilling and cementing. 2.2.Water treatment : Calcium ions can precipitate most anions.Chloride ions precipitate cations,and can also oxidize ions to purify wastewater. 3.Cryogen : Calcium Chloride solution is an important refrigerant for refrigerators and ice making. 4.Used for snow melting and deicing on roads, highways, parking lots and ports. 5.As fog removing agent and dust collecting agent on road, pot 6.As a dryer to dry nitrogen, oxygen, hydrogen, hydrogen chloride and sulfur dioxide etc. 7.As dehydration agent when producing alcohol, ester, ether and acrylic acid. 8.It can increase hardness of concrete and increase cold resistance ability

Minimum Order: 20 square metres

The Introduction of Petroleum Coke Petroleum coke is a by-product of delayed coking unit when the raw oil is cracked at high temperature to produce light oil.The output of petroleum coke is about 25-30% of the raw oil. Its low calorific value is about 1.5-2 times that of coal, ash content is not more than 0.5%, volatile content is about 11%, and its quality is close to anthracite The Application: 1. Low-sulfur, high-quality cooked coke such as needle coke is mainly used to manufacture ultra-high power graphite electrodes and certain special carbon products; needle coke is an important material for the development of new electric furnace steel making technology in the steel making industry. 2. Medium-sulfur, ordinary cooked coke, used in aluminum smelting in large quantities. 3.High-sulfur, ordinary green coke is used in chemical production, such as the manufacture of calcium carbide, silicon carbide, etc., and also as a fuel for metal casting, etc.

Minimum Order: 20 square metres