Other ChemicalsHome > Offers to Sell > Chemicals & Plastics > Other Chemicals
3/2/23 2:54 GMT
Translucent Particle Fluoropolymer Resin PFA Pellet SF-3304A With MFR 12.1-
PFA Pellet SF-3304A with MFR 12.1-16 Product Description PFA is the copolymer of TFE and PPVE, with excellent chemical stability. electrical insulating property, age resistance and low friction. Its high temperature mechanical property is much higher than PTFE and can be processed as common thermoplastics. Grades and Technical Properties Item Unit SF3301 SF3302 SF3303 SF3304 A B C Appearance Translucent particle, without impurities such as metal debris and sand, containing visible black particles percentage point less than 6% MFR g/10min 0.8-2.5 2.6-6 6.1-12 12.1-16 16.1-24 >24.1 Relative Gravity(25℃) g/cm3 2.12-2.17 Melting Point ℃ 300-310 Processing Tm ℃ 260 Tensile Strength(23℃),≥ MPa 32 30 28 26 24 24 Elongation at break(23℃),≥ % 300 300 350 350 350 350 Volatile,< % 0.01 Application: SF3301: used to produce lining of pipe, valve, pump and bearing; SF3302:used to produce pipe, insulation jacket of wire, membranes; SF3303:extrusion process, mainly used to produce the jackets of wire and cable; SF3304:used to produce high-speed extruded wire and cable. Attention The process temperature should not exceed 425℃ to prevent PFA decomposition and equipment corrosion.3. Product waste must be handled properly following local laws and regulations. Packaging, Storage and Transportation 1.Packing:in woven plastic bag with inner polyethylene bag of 25kgs net. 2.Stored in clean, cool and dry places to avoid contamination. 3.Nontoxic, noninflammable, inexplosive, non-corrosion, transported as non- dangerous products. Translucent Particle Fluoropolymer Resin PFA Pellet SF-3304A With MFR 12.1-16 0Translucent Particle Fluoropolymer Resin PFA Pellet SF-3304A With MFR 12.1-16 1 Contact:
Phone: Fax: Email: Sinof Hi-tech Material Co., Ltd.
Room 2010, Building4, Jianfa Fortune Plaza, 191 Tongyi St., Qingyang District, Chengdu, China Chengdu 610000 China 3/1/23 6:46 GMT
C3H8ClNO2S APIs Intermediates L Cysteine Hcl Anhydrous CAS 52-89-1
C3H8ClNO2S APIs Intermediate L-Cysteine Hydrochloride Anhydrous White Crystals or Crystalline Powder Product Details L-Cysteine hydrochloride is a conditionally essential amino acid, which acts as a precursor for biologically active molecules such as hydrogen sulphide (H2S), glutathione and taurine. L-Cysteine hydrochloride Anhydrous suppresses ghrelin and reduces appetite in rodents and humans. Specifications Test Items Standards Description White crystals or crystalline powder Identification infrared absorption spectrum Specifications Specific rotation[α]D20 +5.6 to +8.9° State of solution (Transmittance) clear and colorless not less than 98.0% Heavy metals(Pb) not more than 10ppm Arsenic(As2O3) not more than 1ppm Other amino acids*1 chromatographically not detectable Loss on drying not more than 1.0% Residue on ignition (sulfated) not more than 0.1% Assay 98.0 to 102.0% pH 1.5 to 2.0 Why choose us? our advantages 1. With more than 25 years experience on R&D , production and sales of products. 2. With sound quality management system and enough capacity. 3. The quality of products has won the praise of domestic and foreign customers. 4. Good after-sale service. C3H8ClNO2S APIs Intermediates L Cysteine Hcl Anhydrous CAS 52-89-1 0 Contact:
Phone: Fax: Email: Emeishan Longteng Biotechnology Co., Ltd.
Jiuli Town, Emeishan City, Sichuan, China . Emeishan 614200 China 2/28/23 3:40 GMT
High Gloss Polyurethane Aliphatic Urethane Acrylate Resin For UV Plastic Va
Flexibility,High Gloss And High Fullness Aliphatic Polyurethane Acrylate Resin Used For UV Plastic Vacuum Spraying Features: 1. A bifunctional PUA resin with excellent weather resistance, flexibility, high gloss and high fullness. 2. Used for UV plastic spraying, it can adjust the hardness and flexibility of the formula, balance the water boiling resistance, salt spray resistance, 3. High and low temperature resistance and cold and heat cycle performance of the formula; 4. Has excellent adhesion to different substrates. Quality standard Item Specifications Appearance Colorless to light yellow transparent viscous liquid Chromaticity ≤ 2 Functionality 2 Acid value < 2.0 mgKOH/g Viscosity 10000-22000 cps/60℃ Solid content >98.0% Application Recommended for plastic vacuum plating bottom, surface varnish; 3D printing resin, etc High Gloss Polyurethane Aliphatic Urethane Acrylate Resin For UV Plastic Vacuum Spraying 0 Contact:
Phone: Fax: Email: Shenzhen Rising Novel Material Co.,Ltd
Rm.2216,Bldg G, Hualian Chengshi Quanjing, Xinan, Baoan District, Shenzhen Shenzhen 518000 China 2/27/23 6:29 GMT
Co Removal Catalyst For Ozone Decomposition Catalyst
PRODUCT DESCRIPTION Square Honeycomb Ceramic Catalyst For VOC Treatment Product Description 1. Introuduction Direct-fired waste gas treatment furnace Required temperature: 700-800 degrees Celsius Corresponding exhaust gas types: all The waste gas purification efficiency is over 99.8% Matching with waste gas machine heat recovery system can effectively reduce the operating cost of the factory Catalytic Waste Gas Treatment Furnace (RCO) Required temperature: 300-400 degrees Celsius Spontaneous combustion initiated according to exhaust gas concentration The system design can prolong the service life of the equipment by using pretreatment agent and catalyst cleaning Various adsorption materials can be arranged at the front end 2.general specifications Length Width Height Cell density(CPSI) 150 150 50 46,100,200,300,400 150 150 75 150 150 100 150 150 200 150 150 300 150 150 400 Company Information Founded in Shanghai in 2019, Shanghai Jisi Environmental Protection Technology Co., Ltd. is a technology, sales and service company focusing on the environmental protection of industrial exhaust gas; In the same period, a brand new catalyst brand "Hive Tech" was created for the industrial exhaust catalyst market, aiming to provide high-quality catalysts for the market. The establishment of "Haifu" hopes to make domestic brands occupy a place in this market through continuous R&D investment and its advanced production equipment. Our fully automated production line brings fast response and delivery as well as high quality and stability. Localized production brings high cost performance products, thus breaking the monopoly and leading position of imported catalysts. The company's main products are precious metal/base metal catalysts for VOC emission reduction, SCR catalysts. In addition to general-purpose catalysts, the company also launched efficient alkane catalysts, S-resistant catalysts and halogen resistant catalysts for various market segments. In addition, the shareholders and relevant beneficiaries of the Company also act as agents for other environmental protection related products, such as pumps/valves/control components, to obtain the best price through long-term cooperation with suppliers of this type for foreign trade business. Co Removal Catalyst For Ozone Decomposition Catalyst 0 Packaging & Shipping Co Removal Catalyst For Ozone Decomposition Catalyst 1 FAQ Q1. What is your terms of packing? A: Generally, we pack our goods in neutral white boxes and brown cartons Or wooden cases and foam. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters. Q2. What is your terms of payment? A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance. Q3. What is your terms of delivery? A: FOB, CIF, DDP. Q4. How about your delivery time? A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. Q5. Can you produce according to the samples? A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures. Q6. What is your sample policy? A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost. Q7. Do you test all your goods before delivery? A: Yes, we have 100% test before delivery Q8: How do you make our business long-term and good relationship? A: 1. We keep good quality and competitive price to ensure our customers benefit ; 2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from. Contact:
Phone: Fax: Email: Shanghai JS Environment Technology Ltd.
Shanghai Shanghai 200000 China 2/22/23 3:51 GMT
GW501516 SARMS Raw Steroid Powders GW-501516 Cardarine CAS 317318-70-0 For
GW501516 SARMS Powder GW-501516 Cardarine CAS 317318-70-0 For Strong Muscle Quick Detail: Product name: GW-501516 Alias: Cardarine ; GSK-516 CAS NO.: 317318-70-0 EINECS NO: 212-729-3 Molecular Formula: C21H18F3NO3S2 Molecular weight: 453.5 Assay: 99% Appearance: White powder Usage: It is a potent and tissue-selective androgen receptor modulator (SARM) Description: GW 501516 is a drug that acts as a PPARd modulator. GW 501516 activates AMP- activated protein kinase and stimulates glucose uptake in skeletal muscle tissue, and GW 501516 has been demonstrated to reverse metabolic abnormalities in obese men with pre-diabetic metabolic syndrome, most likely by stimulating fatty acid oxidation. It has been proposed as a potential treatment for obesity and related conditions, especially when used in conjunction with a synergistic compound AICAR, as the combination has been shown to significantly increase exercise endurance in animal studies. GW-50156 regulates fat burning through a number of widespread mechanisms; it increases glucose uptake in skeletal muscle tissue and increases muscle gene expression, especially genes involved in preferential lipid utilization. This shift changes the body’s metabolism to favor burning fat for energy instead of carbohydrates or muscle protein, potentially allowing clinical application for obese patients to lose fat effectively without experiencing muscle catabolism or the effects and satiety issues associated with low blood sugar. GW-501516 also increases muscle mass, which improved glucose tolerance and reduced fat mass accumulation even in mice fed a very high fat diet, suggesting that GW-501516 may have a protective effect against obesity. Appliaction: The effects of GW-501516 are fairly significant and may be a welcomed addition to the stack for a performance athlete. Increased endurance may be the PPAR- RA's most incredible attribute. Those who use the medication will find they do not tire out as easily and can train harder and longer. The cardiovascular endurance that comes with GW-501516 is so strong it has been shown to do away with the cardio issues that surround the popular anabolic steroid Trenbolone. Many who use Trenbolone report breathing becomes a bit more difficult and that cardio becomes a more arduous task. GW-501516 seems to negate this negative effect when using Tren. The effects of GW-501516 also help tremendously with fat loss. If nothing else, you're able to perform your cardio more intensely and longer. Further, it doesn't carry any catabolic effect that is associated with many thermogenics or fat burners, meaning muscle loss due to use is of no concern. More importantly, GW-501516 has been shown to increase nutrient efficiency. Simply put, you make better use of the nutrients you're consuming. Those who use the compound will find increased levels of glucose uptake and fat stores reduced. The known side effects of GW-501516 primarily surround increasing the chances of cancer; however, it's not quite that cut and dry. Studies that showed increased cancer rates in rats used doses of the PPAR-RA far above and beyond what any human would take. Further, additional studies have shown GW-501516 decreased existing cancerous tumors and in effect cured the existing cancer. The truth behind the relationship with this drug and cancer is unknown at this time. Because there is a potential relationship between the medication and cancer, we may never know the truth as it's unlikely any major pharmacy group will undertake any additional study. Specification: Test Items Specification Results Description : White Crystalline Powder White Crystalline Powder Identification : Positive Positive Assay(by HPLC) : 98.0~102.0% 99.84% Absorbance(E1cm) : 465~495 482.5 Melting Point : 191~195℃ 193.5~195.0℃ Loss On Drying : 0.5%max 0.19% Specific Rotation : +288℃~ +298℃ +290.2℃ Residue On Ignition : 0.1%max 0.03% Related Substances : Total:1.5%max <1.3% Single:0.5%max <0.4% Residue Solvents : 0.2%max 0.10% Heavy Metals : 20PPm max <10PPm Conclusion The specification conform with enterprise standard. Contact:
Phone: Fax: Email: Shenzhen KungFu Steroid Pharmaceutical Co.,Ltd
R2-B, South District, Science & Technology Park, Nanshan District, Shenzhen, China Shenzhen 518000 China 2/14/23 6:51 GMT
Bluwat F7 Municipal Sludge Treatment Inorganic Coagulant Nanofloc A644
Summary BLUWAT F7 is a highly active liquid inorganic coagulant that offers higher effective clarification in municipal and manufacturing wastewater treatment, water purification chemicals BLUWAT F7 is a Nanotechnology coagulant and has a great deal of advantages for the biological treatment procedure. BLUWAT F7 can get a better flocs structure and enhance the sedimentation of flocs significantly, then improve MLSS and bacterial concentration throughout the biological process, so treatment performance will be enhanced considerably. It is used in the treatment of commercial and municipal wastewater treatment. Benefits Better coagulation and sedimentation of flocs Much better SVI outcome Reduction turbidity of processed water of 2nd sedimentation tank Promoting the development and reproduction of bacteria in the aeration tank. Better reduction of COD, BOD, TSS, TN, and TP by 30-60%. Avoid Scam and Bulking issues. Cutback of sludge by 30-40%. Much better sludge dewatering effectiveness. Lower treatment cost. Jar Test Procedure 1. Have the water samples from the equalization tank and 2 beakers. 2. Compare to conventional coagulant (Alum, PAC, Ferric sulphate), use 1/5 - 1/4 dose, for example, the existing coagulant is PAC, the dose is 1000ppm, so dose F7 200-250ppm in one beaker water sample. 3. Stir for 20-30 seconds, remain to inspect the sludge settling, and record the settling time. 4. At the same time, test another beaker water sample, with an existing coagulant (Alum, PAC or Ferric sulfate). 5. Compare the 2 beakers' sludge settling time, and measure the density. 6. Take the water after dealt with, and determine the COD, BOD, TSS, TN, TP, and pH worth. 7. Adjust dosage, and do more tests based upon the above actions. Specification Specifications Data Appearance Green to brown Fe+2, % 7.5-8.5 Chlorides, % 0.42-2.5 Density g/cm3 20 ℃ 1.2±0.1 pH 1-3 Bluwat F7 Municipal Sludge Treatment Inorganic Coagulant Nanofloc A644 0 Bluwat F7 Municipal Sludge Treatment Inorganic Coagulant Nanofloc A644 1 Bluwat F7 Municipal Sludge Treatment Inorganic Coagulant Nanofloc A644 2 Contact:
Phone: Fax: Email: Yixing bluwat chemicals co.,ltd
No.16 Yongning Rd., Yixing Chemical Industrial Park, Yixing City, Jiangsu P.R., China, 214213 Yixing 214213 China 2/14/23 3:21 GMT
TPNB Tripropylene Glycol Monobutyl Ether Coating Leatherwear Auxiliary Solv
Product Description Alcohol Ether Chemical Tripropylene Glycol Butyl Ether Cas No 55934-93-5 TPnB is the slowest evaporating glycol ether in the yida product line, and is a high boiling, colorless solvent with low viscosity and practically no odor. Due to its length and hydrophobic structure, this product has a high organic solubility, low water solubility, and a high boiling point. Name: tripropylene glycol butyl ether Another Name: [2-(2-butoxymethylethoxy)methylethoxy]-pr , opano; [2-(2-butoxymethylethoxy)methylethoxy]-P , ropanol; Tri(propyleneglycol)butylether,mixtu , reo; Tripropyleneglycolmonobutylether; Tripr , opyleneglycoln-butylether; ARCOSOLV (R) TPNB; TPNB Specifications: Product Name TPNB tripropylene glycol monoproyl ether Test Method Buyer Product Batch No. Quantity Detection Results No. Items Specifications 1 Appearance Clear,Colorless solution 2 Content ≥99 3 Water Content wt.% ≤0.10 4 Acidity wt.% (Calculated as Acetic Acid) ≤0.01 5 Density -- 6 Color(Pt-Co) -- Concustion Pass Analyst Test Date 2017/5/10 Analysis Director Physical and Chemical Properties Physical State :Liquid. Color :Colorless to yellow Odor :Mild Odor Threshold : No test data available Flash Point - Closed Cup :126 °C (259 °F) ASTMD3278 Flammability (solid, gas) :No Flammable Limits In Air Lower :No test data available Upper :No test data available Autoignition Temperature :202 °C (396 °F) Literature Vapor Pressure :0.002 mmHg @ 20 °C Literature Boiling Point (760 mmHg) :274 °C (525 °F) Literature . Vapor Density (air = 1) :>6 Estimated. Specific Gravity (H2O = 1) :0.930 25 °C/25 °C ASTM D891 Freezing Point : < -75 °C (< -103 °F) Estimated. Melting Point :Not applicable Solubility in water (by weight) :4.5 % @ 25 °C Literature Ph : No test data available Decomposition Temperature:No test data available Partition coefficient, noctanol/water (log Pow):No test data available Evaporation Rate (Butyl Acetate = 1) :No test data available Dynamic Viscosity :7.0 mPa.s @ 25 °C ASTM D445 Applications: Coatings Nitro paint, Varnish and Enamel. Ink It is ideal for use in specialty printing inks. Other Applications Dye, textile assistant, anti-freeze and agriculture chemicals Q: Why choose us? 1) We are manufacturer of ether and acetate products, and we can control quality by ourselves. 2) Different techinical specification available according to client's requirement. 3) Quality and finish time can be guaranteed. 4) All the products will be inspected carefully before delivery by our QC and QA. 5) We assure you the best service at all times. 6) We promise you the safety delivery . TPNB Tripropylene Glycol Monobutyl Ether Coating Leatherwear Auxiliary Solvent 0 Contact:
Phone: Fax: Email: Jiangsu Yida Chemical Co., Ltd.
No. 1 Qiuzhuang Village, Xishiqiao, Jiangyin City, Jiangsu Province. China Jiangyin 213000 China 2/13/23 3:27 GMT
White Powder Diatrizoic Acid USP Amidotrizoic Acid Dihydate
Product Description Diatrizoic Acid Xi'an Libang Pharmaceutical Co.,Ltd has developed Diatrizoic Acid API since 2003, as its biggest manufacturer in China. The typical quality attributes for Diatrizoic Acid as follow: Chemical name: Benzoic acid, 3,5-bis(acetylamino)-2,4,6-triiodo-.3,5- Diacet , amido-2,4,6-triiodobenzoic acid Solubility: Very slightly soluble in water; soluble in ammonia solution or sodium hydroxide solution. Fuction: Amidotrizoic Acid Dihydate is used for producing the radiopaque contrast agent for intravascular use named as Diatrizoate Meglumine and Diatrizoate Sodium Injection or Diatrizoate Meglumine Injection. Advantage: Control the Free aromatic amine limit within a lower acceptance criteria. TEST SPECIFICATION RESULT Appearance White, odorless powder Conforms Identification (1) It responds to the Thin-Layer Chromatographic Identification Test Conforms (2) Positive reaction Conforms Water 4.5%~7.0% 5.6% Residue on ignition NMT0.1% 0.06% Iodine and iodide NMT 0.02% of iodide Conforms Heavy metals NMT 0.002% Conforms Free aromatic amine NMT 0.05% 0.008% Ethyl alcohol NMT 0.5% Not detected Acetic acid NMT 0.5% Not detected Bacterial endotoxins NMT 1.5 EU/g <1.5 EU/g Microbial Limit Total aerobic microbial count: <1000 cfu/g Conforms Total yeast and molds count: <100 cfu/g Conforms Assay 98.0%~102.0%(Calculated on the anhydrous basis) 99.2% Contact:
Phone: Fax: Email: Xi'an Libang Pharmaceutical Co., Ltd.
17/F, Block E, Wangzuo International Plaza, No.1, Tangyan Road, Xi’an Hi-tech Zone, Shaanxi, P.R.China 710075 Xi'an 710075 China 2/9/23 6:20 GMT
2'-dU 2'-Deoxyuridine 2'-Deoxyadenosine Modified Nucleosides HPLC CAS 958-0
It is a derivative of uridine that is used as a therapeutic agent for treating allergy, cancer, infection and autoimmune disease. Purity≥99% AppearanceWhite to Off-white Solid Synonyms1-(2-Deoxy-β-D-erythro-pentofura , nosyl)uracil; Deoxyribose Uracil; Deoxyuridine; NSC 23615; Uracil Deoxyriboside; 1-((2R,4S,5R)-4-Hydroxy-5- (hydroxymethyl)tetra , hydrofuran-2-yl)pyrimidine-2,4(1H,3H)-dione; 1-(2-Deoxy- beta-D-ribofuranosyl)uracil IUPA , C Name1-[(2R,4S,5R)-4-hydroxy-5-(hydroxymethyl)oxola , n-2-yl]pyrimidine-2,4- dione SolubilitySolub , le in DMSO (Slightly), Methanol (Slightly, Heated), Water (Slightly) StorageStore at 2-8°C Contact:
Phone: Fax: Email: Hefei Huana Biomedical Technology Co.,Ltd
Southeast corner of Changsong Road and Changle Road, Hefei Circular Economy Demonstration Park, Feidong County, Hefei City Hefei 230000 China 2/9/23 3:39 GMT
Chemical Water Treatment Decoloring Agent Colorless 215-684-8
50% Water Decolorant Decoloring Agent Decolor Chemical Water Treatment Chemicals Brief Description Water Decoloring Agent is used for the decolorization of textile, printing and dyeing, ink, leather, rubber, coking, papermaking, pharmaceutical and other wastewater. The general decolorizing agent is polyaluminum chloride, and other metal salts with cations, and there are also high-efficiency decolorizing agents. The decolorizer is an organic polymer with a strong positive charge. The dosage is small and the decolorization efficiency is high. It can remove colors that cannot be removed by polyaluminum chloride, and make the final water quality reach an ideal state. Specifications Procuct name Water Decoloring Agent Item CW-08/CW-05 Appearance colorless or light-color sticky liquid Dynamic viscosity(cps,20°C) 50-500 HS 391190/391400 PH (30% water solution) 2.5-5.0 Application Fields Chemical Water Treatment Decoloring Agent Colorless 215-684-8 0 1. Mainly used for waste water treatment in textile, printing, dyeing, paper- making ,mining,link butcherl andfill leachate and so on. 2. Be used for color removal chemical for high-colority waste water from dyestuffs . 3. Be used as retention agent used in the paper mills. 4. Very stable, will not change to a layered when temperature change. Advantages 1. Stronger decolorization and removal of COD,BOD 2. Faster sedimentation, better flocculation 3. Environmental protection 4. Free samples can be sent for u to test Application Method 1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to get clear water. 2. The PH in 6-10 is more appropriate to get better result. 3. polyaluminum chloride, but not mixed together. In this way, the treatment cost can be lower. Whether polyaluminum chloride used earlier or later depends on the flocculation test and the treatment process. One-Stop Service Chemical Water Treatment Decoloring Agent Colorless 215-684-8 1 Package and Storage Chemical Water Treatment Decoloring Agent Colorless 215-684-8 2 1.It is harmless, non-flammable and non-explosive, it can not be placed in the sun. 2.It is packed in plastic drums with each containing 30kg, 50kg, 250kg ,1000kg, 1250kg IBC tank or others according to your requirements. 3.This product will appear layer after a long-term storage, but the effect will not be affected with stir. Storage temperature: 5-30°C. Why Choose Us Chemical Water Treatment Decoloring Agent Colorless 215-684-8 3 Yixing Cleanwater Chemicals Co., Ltd. has been in chemical business since 1985.We specialize in providing chemicals and service for treatment of industrial waste water and urban sewage. Main product include Water decoloring agent, PAC, PAM, pdadmac, polyamine, flocculant and coagulant,etc. ‘CLEAN WATER CLEAN WORLD’ is our company's goal. ‘Rapid response, Immediate action, Excellent quality, Credit first’ is our company's tenet. We believe that we can meet the requirements of domestic and foreign customers with high quality products, reasonable price, timely delivery and perfect service. FAQ 1.Q: How to use decoloring agent? A: The best method is to use it together with PAC+PAM, which has the lowest processing cost. The detailed guidance is available,welcome to contact us. 2.Q: Do you provide after-sales service? A: We adhere to the principle of providing customers with comprehensive services from inquiries to after-sales. No matter what questions you have in the process of use, you can contact our sales representatives to serve you. 3.Q: How can I get sample for lab test? A: We could provide some free samples to you. Please provide your courier account (Fedex, DHL, etc) for sample arrangement. 4.Q: We have more questions, how to contact you? A: Welcome to contact us on alibaba.com, we'll reply as soon as possible. Contact:
Phone: Fax: Email: Yixing Cleanwater Chemicals Co.,Ltd
South of Niujia bridge,Guanlin town,Yixing,Jiangsu Province,China Yixing 214200 China 2/3/23 10:53 GMT
SSD SOLUTION
CALL/WATSAPP:+918800595971 for professional BLACK MONEY CLEANING( BLACK/WHITE/GREEN-DOLLARS,EUROS,POUNDS) acquired through UNITED NATIONS,LOTTERY,LOANS AND INVESTMENT FUNDS with black dollars cleaning machine, SSD automatic Solution, Activation powder and mercury powder. We are the major SSD solution suppliers in INDIA and worldwide for black dollar cleaning. We have in stock, 100% concentrated SSD solution for sale and our SSD solution price is affordable. Our SSD solution chemical is sold with a detailed user manual guide and DVD PLATE for comprehensive instruction on how to clean without technicians help. Black Money Cleaning Machine for sale and RENT for HUGE AMOUNT cleaning. DR.OMAR KHALID +918800595971 benyssdchemicals77@gmai , l.com 44, Mahavir Nagar Dwarka Sector 62 New Delhi - 110001 Contact:
Phone: Fax: Email: BENY SSD SOLUTION CHEMICAL PVT
44, Mahavir Nagar Dwarka Sector 62 New Delhi - 110001 NEWYORK 10003 India 1/30/23 1:41 GMT
15 Years Factory spot CAS 23111-00-4 NR NRC joan@senyi-chem.com +861753190
Hello everyone, I am a manufacturer from China. We mainly produce and sell pharmaceutical intermediates, cosmetics raw materials, paints, pigments, boric acid, deworming drugs, cocaine and other chemical products as well as plant extracts. Product List: Contact us W hat sA pp/ wec hat : +8 617 531 900 322 E m ail: joan @s eny i-ch em. com Wickr me:joan li selling Cas 79099-07-3 powder N-tert-butylcarbonyl-4-piperidone Cas 288573-56-8 1-tert-butoxycarbonyl -4-[(4-fluorophenyl) amino] piperidine Cas443998-65-0 1-BOC-4-(4-bromo-aniline) -piperidine Cas 1451-83-8 / Cas 1451-82-7 2-bromo-4-methylphenylacetone cas 49851-31-2 2-Bromo-1-Phenyl-1-Pentanone Cas123 pyrrolidine - 75-1 Cas 236117-38-7 1-acetone, 2-iodine-1 -(4-methylphenyl)- Cas 5337-93-9 methyl phenylacetone Cas1009 9-14 - phenyl ketone 1, 4-butanediol BDO CAS 110-63-4 Fenacetin CAS62-44-2 Levamisole CAS 14769-73-4, Teimidazole hydrochloride CAS5086-74-8 Procaine hydrochloride CAS51-05-8 Benzocaine hydrochloride Li d oc ai ne hydrochloride CAS73-78-9 Tetracaine hydrochloride cas136-47-0 Boric acid CAS 11113-50-1 Welcome to inquire! Our main sales: Focus on: Cas no.: 49851-31-2Yellow liquid Cas No.: 20320-59-6 BMK oil Cas No.: 28578-16-7 PMK oil & PMK powder Cas no: 236117-38-7Yellow powder Cas No: 1451-82-7 Wh ite po w der Cas no: 102-97-6Big crtstal Cas No: 288573-56-8KS-0037 powder Caine series: Cas no: 94-09-7 Benzocaine Cas no: 137-58-6Li do ca in e Cas no: 94-24-6Tetracaina Cas no: 59-46-1Procaine Cas No: 73-78-9 L ido cai ne hydrochloride Cas no: 16595-80 -5Levamisole Hydrochloride Cas no: 23076-35-9Xylazine Hydrochloride Cas no: 5086-74-8Tetramisole Hydrochloride Cas no: 51-05-8Procaine Hydrochloride Wh ats App/We Ch at E m ai l: joa n@s eny i-che m.co m Wickr me:joan li Wha tsA pp/ wechat : + 8 6 17 5 3190 03 22 Em ail add re ss: jo an @s enyi -ch em .com Wickr me:joan li Minimum Order: 1 bags Contact:
Phone: Fax: Email: Xi'an SENYI New Material Technology Co.
Room 2014-162, First Building of the Old Third Session, Longshou Village, Weiyang District, Xi'an Ci Mississauga 11211 United States 1/30/23 1:39 GMT
15 Years Factory spot CAS 137-58-6 lidocaine joan@senyi-chem.com +8617531
Hello everyone, I am a manufacturer from China. We mainly produce and sell pharmaceutical intermediates, cosmetics raw materials, paints, pigments, boric acid, deworming drugs, cocaine and other chemical products as well as plant extracts. Product List: Contact us W hat sA pp/ wec hat : +8 617 531 900 322 E m ail: joan @s eny i-ch em. com Wickr me:joan li selling Cas 79099-07-3 powder N-tert-butylcarbonyl-4-piperidone Cas 288573-56-8 1-tert-butoxycarbonyl -4-[(4-fluorophenyl) amino] piperidine Cas443998-65-0 1-BOC-4-(4-bromo-aniline) -piperidine Cas 1451-83-8 / Cas 1451-82-7 2-bromo-4-methylphenylacetone cas 49851-31-2 2-Bromo-1-Phenyl-1-Pentanone Cas123 pyrrolidine - 75-1 Cas 236117-38-7 1-acetone, 2-iodine-1 -(4-methylphenyl)- Cas 5337-93-9 methyl phenylacetone Cas1009 9-14 - phenyl ketone 1, 4-butanediol BDO CAS 110-63-4 Fenacetin CAS62-44-2 Levamisole CAS 14769-73-4, Teimidazole hydrochloride CAS5086-74-8 Procaine hydrochloride CAS51-05-8 Benzocaine hydrochloride Li d oc ai ne hydrochloride CAS73-78-9 Tetracaine hydrochloride cas136-47-0 Boric acid CAS 11113-50-1 Welcome to inquire! Our main sales: Focus on: Cas no.: 49851-31-2Yellow liquid Cas No.: 20320-59-6 BMK oil Cas No.: 28578-16-7 PMK oil & PMK powder Cas no: 236117-38-7Yellow powder Cas No: 1451-82-7 Wh ite po w der Cas no: 102-97-6Big crtstal Cas No: 288573-56-8KS-0037 powder Caine series: Cas no: 94-09-7 Benzocaine Cas no: 137-58-6Li do ca in e Cas no: 94-24-6Tetracaina Cas no: 59-46-1Procaine Cas No: 73-78-9 L ido cai ne hydrochloride Cas no: 16595-80 -5Levamisole Hydrochloride Cas no: 23076-35-9Xylazine Hydrochloride Cas no: 5086-74-8Tetramisole Hydrochloride Cas no: 51-05-8Procaine Hydrochloride Wh ats App/We Ch at E m ai l: joa n@s eny i-che m.co m Wickr me:joan li Wha tsA pp/ wechat : + 8 6 17 5 3190 03 22 Em ail add re ss: jo an @s enyi -ch em .com Wickr me:joan li Minimum Order: 1 bags Contact:
Phone: Fax: Email: Xi'an SENYI New Material Technology Co.
Room 2014-162, First Building of the Old Third Session, Longshou Village, Weiyang District, Xi'an Ci Mississauga 11211 United States 1/11/23 11:08 GMT
sulfur
Full Name: Sulfur Properties: Bright yellow powder Usage: It is used widely in rubber tire, pigments, paper making, pesticide and bactericide, food industry and semiconductor industry, etc. Storage: In a dry, cool and well-ventilated place. Protection from sunshine, rain, moisture, heat/sparks/open flames/ hot surfaces, etc. No. Particulars National standard specs Analysis result 1 S 99.95%min 99.98% 2 Organic 0.03%max 0.01% 3 Ash 0.03%max 0.008% 4 Acidity 0.003%max 0.002% 5 As 0.001%max 0.00005% 6 Moisture 2.0% Max 0.03% 7 Fe 0.003%max 0.0004% Minimum Order: 20 square metres Contact:
Phone: Fax: Email: Growell Technology Limited
No. 16 Xiangtan Road Qiandao 266100 China 1/11/23 11:02 GMT
Aloe Emodin
Full Name: Aloe Emodin Molecular Formula:C15H10O5 Molecular Weight:270.24 EINECS No.: 207-571-7 CAS No.: 481-72-1 Properties: orange yellow powder Usage: It applied in the fields of food and health product , aloe contains a lot of amino acids, vitamins, minerals and other nutrients, which can help body with better health care. It applied in cosmetic field, it is able to nourish and cure the skin. Package: 25kg fiber drum, 1kg aluminium foil bag, or as customer request Technical Data Sheet: Parameter Guarantee Appearance Orange yellow powder Loss on drying %≤ 0.5 Moisture %≤ 0.5 Residue%≤ 0.5 Assay % ≥ 95 Minimum Order: 20 square metres Contact:
Phone: Fax: Email: Growell Technology Limited
No. 16 Xiangtan Road Qiandao 266100 China SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
© 1996-2024 IMEXBB.com. All rights reserved.
|
|