Chemical Equipment

FRP chemical storage tank (also known as FRP chemical storage vessel), is manufactured by filament winding process and designed to store high corrosive chemicals like acids, alkalis, alcohols, mineral oils and esters. It can used at high temperature, under high pressure and performs well in preventing seepage, leakage and overflowing. We offer FRP storage tanks in various dimensions and colors to meet your requirements. In addition, FRP chemical storage tanks can also be offered with suitable agitators, ladder, gear box, electric motor and other accessories. FRP chemical storage tank can prevent seepage, leakage and overflowing No. Volume (m3) Size(mm) DN*Height Medium Weight (kg) Temperature (℃) 1 10 Φ2000*3700 Dilute sulfuric acid 750.7 0-60 2 20 Φ2500*4700 Dilute nitric acid 1036.4 0-60 3 30 Φ3000*5000 Sodium silicate 1644.8 0-60 4 45 Φ3500*5200 Ammonium sulfate 2380.9 0-60 5 60 Φ3800*5600 Hydrochloric acid 3117 0-60 6 70 Φ4000*6500 Caustic soda 3725.6 0-60 7 100 Φ4000*8500 Sulfuric acid 5197.2 0-60 8 230 Φ5500*9280 Hot hydrochloric acid 12473.3 0-80 9 500 Φ9000*10512 Hydrochloric acid 24905 0-60

FRP Horizontal tank, also called FRP horizontal vessel, is a device composed by leakage-resistant and anti-corrosion inner layer, firm structural layer, anti- aging outer layer, heads, nozzles, and saddle supports. FRP (Fiberglass Reinforced Plastic), its raw material, is a special kind of plastic which has been reinforced with fiberglass, similar to the way that rebar strengthens concrete. FRP Horizontal tank is a perfect choice when you are in need for storage tank but have a vertical height limitation. By using filament winding method, the material of horizontal FRP tank can be reinforced to adjust its physicochemical ability and meet different requirements. FRP GRP Storage Tank Features Excellent physicochemical performance & durability: FRP Horizontal tank has high strength, good corrosion resistance and thermal insulation Long service life & low maintenance cost: FRP Horizontal tank has smooth inner wall which is non-toxic, odorless and easy to clean Wide range of application: FRP Horizontal tank is widely used in many different fields for storing kinds of liquid Light weight: FRP Horizontal tank is made of fiber reinforce plastic which is lightweight Application Because of the notable advantage of its material, FRP horizontal tank is gradually taking the place of metal tanks in many field. Horizontal FRP tank is supplied for both above and underground applications and has an extensive usage in metallurgic industry, chemical industry, medical treatment industry, light industry, construction industry, textile industry, food industry and electroplating waste water treatment, etc.

Fiberglass reinforced plastic FRP GRP mortar pipe Product Description Fiberglass reinforced plastic FRP GRP mortar pipe adopts resin as basis material, glass fiber as reinforced material and filled with quartz sand. The resin-based body is wound on a rotating mandrel layer by the glass fibers. The quartz sand is evenly laid as a mortar layer at a long distance between the fibers. This unique structure make the pope wall structure reasonable and advanced and the role of the material can be fully exerted. The stiffness is improved without effect the service strength. So it can ensure the stability and reliability of the GRP pipes. The property and advantage of FRP GRP mortar pipe FRP/GRP mortar pipe is also called RPM pipe, as the RPM pipe is accompanied with sand in its structure, compared with the pure FRM pipe, it not only has property of lightweight and high strength, but also possess high stiffness as the buried pipe and low cost. So it is welcomed form its presence. The usage in conveying water or other fluid is more and more. The relative information reported that 160 thousand kilometers long RPM pipe had been installed in America during the middle period of 1990s. in Europe, the length of new laid large and middle diameter RPM pipe for conveying water and sewage accounted for 30%~50% of total installed length.

GRP FRP pipe winding production line is used to produce various size and specifications of FRP mortar pipe and FRP process pipe. FRP Filament Winding Machine’s key elements such as the transducer, servo system and photo electrical encoder are from Siemens, Germany. Showing the English ideograph in menu, operating easily, after the parameters inputted into the computer, it can be finished the relative design of winding linearity. The combined movements of the main axle and the carriage controlled by the computer, conforms the winding rules, the technical parameters and its inner quality have arrived the advanced level in China. The range of diameter can be wound: DN300~DN4000mm The maxi length: 12m The winding angle: 45°~ 90° The total power: 10Kw The tolerance of positioning:＜1mm The maxi width of roving sheet: 150mm The productivity: 500kg/h

We are specialized in the design, manufacture, installation and technology transfer of production guidance of potassium sulphate production equipment. Based on German Mannheim Furnace, by working over its principle and construction, we improve the construction and material of furnace to achieve even heating, complete reaction and low energy consumption. New material and technology is applied to the part of hydrochloride acid absorption, thus absorption efficiency is enhanced and environmental issue is also well resolved. Our company can provide the whole set potassium sulfate Plant, we can provide the service from design,manufacturer to installation and commissioning,the process is Mannheim furnace.One set plant capacity is 10,000 tons per year,how many capacity you need,how many sets of equipment you can got. Technical advantage 1. Some key components of our potassium sulfate fertilizer equipment are made of special materials which are corrosion resistant and durable. Hence, this fertilizer equipment also features long service life. 2. Waste recovery system to recycle hydrochloride acid (HCl) and meet environment requirements 3. Adjusted original HCl absorption system, improved on the quality of the final product. 4. Improved the flue design in the furnace which can make full use of energy and save energy consumption. 5. Used PLC automatic control system to control manufacturing the products, adjust the ratio of feedstock, and saved the labor cost. 6. Adopt gas generator replacing other heating method 7. Stable production and easy operation. 8. Large output& Low coal consumption. 9. Advanced 3D design technology.

Processing and production With an extremely fine closed-cell structure, the foam has minimal resin uptake and problem-free compatibility with metallic facing materials due to the absence of corrosive effects. Cascell ® HF foam is suitable for hand lay-up, prepreg processing and vacuum infusion at temperature up to 130°C and pressure up to 0.3 MPa. Thermoforming and shaping Cascell® HF can be easily thermoformed or CNC machined to meet customers’ requirements, bringing tremendous manufacturing advantages. High precision, pre-shaped and ready-to-use foam cores in complex or simple geometries can also be supplied by the Cascell® Machining Department. Cascell® HF foam core has been specifically designed for antenna application, due to its extremely low dielectric constants and particularly favorable transmission properties. It can also be used as structural core for radomes and mammography plates.

Minimum Order: 1000

Product Description Molecular Distillation is a special liquid-liquid separation technology, which is different from the traditional distillation by boiling point difference separation principle, but by different substances molecular movement of the average free path difference to achieve separation. Molecular distillation is considered as the safest mode of separation and to purify the thermally unstable molecules and related compounds with low volatility and elevated boiling point. The process distinguishes the short residence time in the zone of the molecular evaporator exposed to heat and low operating temperature due to vacuum in the space of distillation.   Working Process: Feed material is delivered from a feed flask into the main jacketed evaporator, having heating frompei the jacket, and a diagonally slotted wiper mechanism forcing liquid around and downward in a thin film on the inside. In the center of the body is a closely positioned internal condenser, providing a short path for vapor molecules traveling from the heated surface to the condenser surface. During the journey downward, lighter (lower boiling point) fractions of the liquid begin to vaporize, move to the internal condenser and condense, falling down as a liquid into a well that captures and separates the distilled liquid which flows into the Distillate receiving flask. Heavier residue material (like chlorophyll, salts, sugars, heavy wax) does not evaporate and instead travels the length of the main evaporator body and flows into the Residue receiving flask.   Applications: Molecular istillaion is applied for separation of high boiling point, heat- sensitive and readily oxidizable materials. Purification after Extraction, (supercritical CO2, butane, hydrocarbon, ethanol, etc.) Purification after Extraction, (supercritical CO2, butane, hydrocarbon, ethanol, etc.) Chlorophyll, Phytosterols, Insecticide, Fat & Wax Removal. Concentration of Botanicals& Essential Oils Oil Deodorization Vitamin, Nutraceutical, Essential Oil lsolation Pharmaceutical   Practices: Plants and animals essential oil distillation Molecular distillation is used to distill high-value and high-purity extracts from essential oils of animals and plants, such as refined hemp oil, eaglewood, fish oil, traditional Chinese medicine, etc. Its extracts can be used as food additives, health products or medicinal raw materials. Chemical separation and purification Molecular distillation is applied to the separation and purification of high-value chemical synthesis products, such as chip glue, insulation coating, pharmaceutical intermediates and aviation lubricants.   Wiped Film Molecular Distillation System (Borosilicate Glass) Taking advantage of molecular distillation working principle, our YMD series Wiped Film Molecular Distillation System is a high efficient apparatus for distillation of animal and plants oil. Glassware parts with excellent visibility are self-manufactured, with great flexibility in production, and can be completely customized according to customer requirements. Magnetic seal components are independently developed to ensure maximum vacuum in the system and efficient evaporation. Short residence time so that heat-sensitive substances will not deteriorate Flexible configuration options for system so as to increase production capacity and save manpower. According to different customer's production needs and purchase budget, we provide customers with turnkey solutions.   Model No RN-60 RN-80 RN-100 RN-150 RN-200 Effective evaporation area(㎡) 0.06 0.1 0.15 0.25 0.35 Feeding rate（kg/h） 0.1-2 0.1-3 0.2~4 0.3~6 0.4~7 Motor Power（W） 90 120 120 120 200 Rotation speed 50~500rpm Operation temperature Up to 300 C Electrical requirement 220V/50~60Hz Other options can be provdied

Minimum Order: 1 bags

Different FFP2 types of masks use different filter materials. On the one hand, the filtering effect is related to the particle size of the particles, and it is also affected by whether the particles contain oil. As a rule of thumb, FFP2NR Disposable protective mask are great when you need surgical and respiratory protection. The best feature of these ffp2 masks is that they provide complete protection against allergens and other harmful gases which can damage the lungs or other body parts.

Minimum Order: 1000

Non Telecentric Lens As a professional optical lens manufacturer in China, Canrill also produces high-quality non-telecentric lens with consistently high-quality. New series WD range from 49mm to 1405mm, magnification from 0.1X to 1X Smaller size for installation in small space Support to 2/3' C mounting industrial lens

Minimum Order: 8000

Epichlorohydrin is the main raw material for the production of epoxy resin. It is also an important organic chemical raw material and fine chemical prod Epichlorohydrin is the main raw material for the production of epoxy resin. It is also an important organic chemical raw material and fine chemical product. It has a wide range of uses. There are three main processes: acryl acetate process, propylene process and glycerin process. In the traditional propylene process, raw materials rely on petroleum resources, and the fluctuation of its basic price is also affected by the oil price. In order to reduce the use of petroleum resources, the biodiesel industry is developing rapidly. In the process of the development of the industry, the by- product glycerol production has been improved, which provides a reliable source of raw materials for the production of propylene oxide.

Wet catalytic oxidation, the standard abbreviation CWO, refers to raising the temperature of wastewater to 180 ℃ - 325 ℃, using the oxygen in the air to increase the solubility with the increase of pressure. Under the action of catalyst, oxygen molecules and organics in wastewater undergo a rapid oxidation reaction, resulting in ring breaking and chain breaking of organics, which are collectively referred to as degradation. The principle of degradation reaction is free radical chain reaction. The primary products of oxidative degradation are simple organic acids and organic alcohols below C4. Some of the degradation products will be deeply degraded and mineralized into carbon dioxide to form the removal of TOC. The degradation rule is that the higher the reaction temperature is, the greater the proportion of deep degradation to carbon dioxide is. The catalytic strength can reduce the energy level of degradation reaction and increase the speed of degradation reaction. The top of wet catalytic oxidation process is supercritical oxidation.

SL TEC Formaldehyde Plant SL TEC has close to ten years experience in formaldehyde production technology based on silver contact process(or silver catalyzed process). A lower methanol consumption, higher formalin product concentration, high export steam capacity and ease of operation are our features, which makes it the best technical and economically viable solution. Every unit operation incl. methanol evaporation, catalytic reaction, absorption, off-gas treatment has optional design to at best satisfy the customer’s needs. We provide one-stop package solutions from the formaldehyde plant design, manufacture, erection, commissioning, startup to training, with the production capacity of 6,000TPA – 120,000TPA and the formaldehyde product concentration varying from 37-55%. And according to the customer’s different needs, there are totally 7 (seven) optional processes as follows:

We offer complete package solutions for chemical distillation plant/distillation design/distillation tailoring using all-component analysis, process simulation, and a process automation package. Moreover, we also provide corresponding chemical sewage treatment solutions to satisfy the customers.  Chemical distillation plant/distillation design is our core competitiveness, we have engineering experiences in phenolic distillation plant, methanol-DMC distillation plant, coarse methanol distillation plant, fusil oil distillation plant, mixed aromatic distillation plant, light hydrocarbon distillation plant, acetate distillation plant (incl. methyl acetate, ethyl acetate, butyl-acetate and amyl-acetate) methylal distillation plant and dilute formalin enrichment plant.

Polymethoxydialkyl ether (PODE) is a kind of oligoether compound which is produced by acetalization reaction. When both ends of poden are blocked by methoxy, it is called polymethoxydimethyl ether (dmm3-8, molecular formula CH3O (CH2O) nch3). Compared with DME and dmm1, dmm3-8 has higher viscosity and boiling point, so mixing with diesel does not need to change the existing engine Oil supply system. When the polycondensation molecular unit is controlled at n = 3-6, dmm3-8 has a good miscibility with diesel oil, with an average cetane number of over 76 and a boiling point of 156-268 ℃, which is just in the range of diesel oil. It overcomes the shortage of DME and dmm1 as fuel components, fully meets the requirements of clean diesel oil blending and components, and is considered to be a promising environmental protection diesel oil component.