![]() |
![]()
Chemicals & Plastics - Others![]() Home > Offers to Sell > Chemicals & Plastics > Others
10/30/20 1:39 GMT
Homogenizer
Performance Characteristics of small homogenizer 1. The exclusive design of the crushing plate adopts a hard rubber blade that has a strong crushing ability. The smashing takes a short time, which is about half of the conventional method. 2. Stainless steel material is used. The sample has no contact with the laboratory homogenizer, and the packaging is hygienic and safe. 3. The mobile glass door switch is easy to load and unload, and the smashing state of the sample can be directly observed through a transparent window. 4. The instrument can be used with our dispensing pump to fully mix the diluted sample. 5. There are manual mode and an automatic mode, and the smashing time can be easily set. Crushing Ability Comparison Conventional flat bats are difficult to completely smash the sample, and the new pulverized plate with a hard rubber blade can completely smash the sample in a short time. Functional application 1. The instrument is suitable for sample preparation of microbial analysis of various foods, medicines, and cosmetics. 2. Put the substance to be tested into the blender bag and inject the dilution solution (our company's dispensing pump is suitable for solvent diluent ), close the glass door, the pulverizing plate of the homogenizer will start to slap, the pressure generated will crush and mix the contents of the bag. Specification of Homogenizer Name Model Specification Validity Period Homogenizer Pro•media SH-ⅡM Power supply: AC110V 1 year Power: 100W Weight: 17KGS Dimension: 255*345*345mm Automatic mode: 15s, 30s, 30s Manual mode: automatic shutdown after 10 minutes of continuous operation The matching use of the company's homogenized bag series is more effective. Looking for lab homogenizers for sale? ELEX Biological Products (Shanghai) Co., Ltd., established in 2013, is a colony counter manufacturer, which specializes in sales, research and development of microbiological test products for food hygiene testing and environment testing, simultaneously act as an agency of microbial testing equipment from ELMEX Corporation of Japan. The factory has passed ISO9001:2015, and the products have passed the strict assessment of the quality management of the Japanese food industry and are favored by the industry. Its top popular product---ST swab sampler series account for 70% of the market rate in Japan. Minimum Order: 100000 Contact:
Phone: Fax: Email: Elex Biological Products (Shanghai) Co., Ltd.
Room E121, No. 2800, Wanyuan Road, Minhang District, Shanghai City, P.R. China Shanghai 201100 China 10/30/20 1:38 GMT
Dispensing Pump
Performance Characteristics of Culture Media Dispenser 1. Small size, light design, easy to clean and move. 2. According to the operation needs, the nozzle can be installed freely left and right. 3. The pneumatic type liquid feeding method is adopted, and the dispensing speed is increased by 20% compared with the original product. 4. The dilution solution can use our company's sterilization diluents MV2- 1000PBS or filling the homemade dilution solution into the matching sterilization bottle SB4000 to contact the device. 5. Intelligent mode, automatic dilution: automatically measure the sample weight and multiple dilute the sample. There is no need to manually measure the sample weight. 6. Quantitative dispensing: The packing amount can be set freely. 7. Choose to have a printer and connect to a computer for data management. 8. The specific dilution factor will be automatically archived for the next dilution. 9. Stainless steel material is easy to clean. The pedal switch can be used in a clean stand. 10. Low noise. It can be stopped quickly and no residual droplets. Technical Specifications of Dispensing Pump Sample weight 0.5~1000g Dilution amount 5~1000ml Dilution precision Within ±1.0g Dilution speed 16.67ml/sec (6 seconds for 100ml dispensing) Dilution multiple 2-999 times Weighing range 0.1~1500g Density setting 0.7-1.4g/ml Material Stainless steel Power supply AC 110V Weight 7.5kg Dimension 320х280х270mm Products Details of Dispensing Pump Products List Selective Purchasing products Name QTY Name Model QTY Warranty period Dispensing pump 1 set Printers (heat sensitive photocopiers, wiring, AC presses, heat sensitive paper) PA030 1 1 year Dispensing nozzle 1set Computer Output Devices (Special Software, RS232C Wiring) PA061 1 Silicone gel tube 2 pcs Pedal switch PA037 1 Electronic scale 1 set 4 liter sterilizing bottle, cap for injection/extraction, circular filter plate, silica gel tube (nozzle, infusion tube can be sterilized together after connecting) SB4000 1 set DT-Cube bracket(SUS) 1 set MV2-1000 infusion apparatu 1 set Sterilization diluents (phosphate buffered saline, 1 liter х10 bottles) MV2-1000 1 set For homogenizers, please refer to ELMEX's Pro•media SH-IIM. It is better to use the company's diluents and homogenized blender bag series. ELEX Biological Products (Shanghai) Co., Ltd., established in 2013, is a colony counter manufacturer, which specializes in sales, research and development of microbiological test products for food hygiene testing and environment testing, simultaneously act as an agency of microbial testing equipment from ELMEX Corporation of Japan. The factory has passed ISO9001:2015, and the products have passed the strict assessment of the quality management of the Japanese food industry and are favored by the industry. Its top popular product---ST swab sampler series account for 70% of the market rate in Japan. Contact:
Phone: Fax: Email: Elex Biological Products (Shanghai) Co., Ltd.
Room E121, No. 2800, Wanyuan Road, Minhang District, Shanghai City, P.R. China Shanghai 201100 China 10/30/20 1:37 GMT
Diluents Series
What are diluents? In daily practical experiments, when the liquid samples are collected correctly, we often do not need a pure solution to carry out experiments. In order to get better and more accurate detection results, diluent water or other solutions will be added to obtain the solution with lower concentration. In this process, the solvent diluent is needed. In many laboratories, it is generally believed that direct preparation of buffer by diluent reagent will be more accurate and cheaper, which is not in line with the fact, because the quality of buffer is related to the purity of reagent, the accuracy of reagent weighing, the quality of purified water and other factors such as temperature, preparation container and so on. ELEX diluents series has greatly improved the trouble and inaccuracy caused by the preparation of diluents on site. The product mainly contains two types of diluents: gradient dilution and sterile diluents. Diluents Series In daily practical experiments, when the liquid samples are collected correctly, we often do not need a pure solution to carry out experiments. In order to get better and more accurate detection results, diluent water or other solutions will be added to obtain the solution with lower concentration. In this process, the solvent diluent is needed. In many laboratories, it is generally believed that direct preparation of buffer by diluent reagent will be more accurate and cheaper, which is not in line with the fact, because the quality of buffer is related to the purity of reagent, the accuracy of reagent weighing, the quality of purified water and other factors such as temperature, preparation container and so on. ELEX diluents series has greatly improved the trouble and inaccuracy caused by the preparation of diluents on site. The product mainly contains two types of diluents: gradient dilution and sterile diluents. Phosphate Buffered Saline Phosphate Buffered Saline Gradient Diluents GD-9 Series of Gradient Dilution is the most widely used in the laboratory. LEARN MORE Sterile Diluents Sterile Diluents After irradiation sterilization, it is suitable for the dilution of different samples. Some products can be used with various devices, which are simple, safe and easy to operate. LEARN MORE Gradient dilution is the most widely used in the laboratory. It has phosphate- buffered saline, 1% buffered peptone water and 0.1% phosphate-buffered peptone saline. Other solutions can be customized according to customer needs. The wide push plate design of the front end of the gradient dilution liquid bottle cap minimizes the possibility of contact pollution when opening the cap; the tongue pressing design of the back end of the bottle cap facilitates the easy control of the opening angle of the cap by one hand, which make the operation more convenient, reasonable and convenient. Sterile diluents mainly have MT-11 series, MV2-90 series, MV-225 series (wide mouth), MV2-1000 series and MV-1000 series, equipped with PBS, BPW, MRD and AP solutions. MT-11 series contains 9ml diluents, which is similar to gradient diluents GD-9 for gradient dilution. Customers can customize different types of diluents according to their own needs. The series of buffers are prepared with high standard substances under purified environment and sterilized by irradiation. They are suitable for dilution of different quantities of samples. Some products can be used in conjunction with various devices produced by our company to prevent secondary pollution, which is safe, highly efficient and easy to operate. ELEX Biological Products (Shanghai) Co., Ltd., established in 2013, is a colony counter manufacturer, which specializes in sales, research and development of microbiological test products for food hygiene testing and environment testing, simultaneously act as an agency of microbial testing equipment from ELMEX Corporation of Japan. The factory has passed ISO9001:2015, and the products have passed the strict assessment of the quality management of the Japanese food industry and are favored by the industry. Its top popular product---ST swab sampler series account for 70% of the market rate in Japan. Minimum Order: 100000 Contact:
Phone: Fax: Email: Elex Biological Products (Shanghai) Co., Ltd.
Room E121, No. 2800, Wanyuan Road, Minhang District, Shanghai City, P.R. China Shanghai 201100 China 10/30/20 1:35 GMT
Culture Media Series
In microbial detection, when the sample is collected and diluted correctly, the prepared sample solution needs to select the appropriate culture medium for cultivation, so as to judge whether the sample meets the standard. The choice of culture medium means whether we can get the desired experimental results quickly. ELEX is a culture media supplier providing culture medium that is mainly used for rapid detection, to make the microbial detection more simple and effective. The culture media of microbiology mainly include DNP Medi·Ca culture medium plate, concentrated liquid chromogenic medium, tri-color agar medium, and liquid chromogenic medium. Different types of culture media for bacterial growth have their own characteristics. ELEX Biological, one of the most professional culture media suppliers, can provide different types of culture media with high quality. Compared with other agar media, DNP media is a kind of culture media for food microbiology, which makes the food microbial detection much easier, more standardized, more efficient and pollution-free. It can be used directly after opening, easy to see colony, and can reduce the cultivation area and waste gas. At present, AC test tablets are used to detect the total number of common colonies, CC test tablets to detect coliforms bacteria, EC test tablets to simultaneously detect E.coli and coliforms bacteria, SA test tablets to detect Staphylococcus aureus. All of ELMEX's Medi·Ca culture medium plate have passed the AOAC authoritative certification, and have been included in the Japanese food hygiene inspection guidelines. Compared with the traditional medium, DNP Film·Media Culture Medium Plate has the following advantages. Firstly, the preparation process of the medium is omitted which saves time; the steps are reduced which lower the possibility of contamination in the process. Secondly, the medium plate can be placed overlapping, saving about 95% of the cultivation space, in addition to reducing emissions of exhaust gas and greenhouse gas (GHG), which save s environmental protection costs. Thirdly, it is easy to operate and does not depend on the operator's level. The bacterial colony is easy to see with convenient judgment and accurate result. Compared with other similar products, it also has the following advantages: firstly, sample dropping can be carried out uniformly without pressure plate with fewer steps which is fast and convenient; secondly, there is a special anti-spillover ring, sample liquid will not spill and lead to cross- contamination. Concentrated liquid chromogenic medium ST-SSP can be used in combination with our swab simpler, and can be used for the qualitative detection of E. coli and coliforms at the same time. Tri-color agar medium is widely used for simultaneous qualitative and quantitative detection of coliform bacteria, Escherichia coli and other intestinal bacteria in food, water, milk, ice cream and meat products. Colonies show three colors, which can be easily judged and counted. There are two kinds of chromogenic substances in liquid chromogenic medium, which can directly identify coliforms and Escherichia coli, but only for qualitative detection. ELEX Biological Products (Shanghai) Co., Ltd., established in 2013, is a culture media supplier, which specializes in sales, research and development of microbiological test products for food hygiene testing and environment testing, simultaneously act as an agency of microbial testing equipment from ELMEX Corporation of Japan. The factory has passed ISO9001:2015, and the products have passed the strict assessment of the quality management of the Japanese food industry and are favored by the industry. Its top popular product---ST swab sampler series account for 70% of the market rate in Japan. Minimum Order: 100000 Contact:
Phone: Fax: Email: Elex Biological Products (Shanghai) Co., Ltd.
Room E121, No. 2800, Wanyuan Road, Minhang District, Shanghai City, P.R. China Shanghai 201100 China 10/30/20 1:34 GMT
Contact Agar Medium 4x4
Performance Characteristics of Contact Agar Based Medium 4x4 1. It is widely used in environmental sanitation, apparatus, sedimentation bacteria, and hand colony inspection. 2. It can be used directly after opening, no need to prepare a medium which saves much time. 3. The medium area is 10 cm². It's divided into 10 small cells which are easy to count. Microbiology Agar Medium Types AC • Standard Plate Counting Agar Based Medium Used for the identification of the total bacteria number. EC • Three-color Agar Based Medium Escherichia coli and coliforms can be simultaneously detected. E.coli colonies are blue to light purple. Coliform colonies are red to purple. Other intestinal bacterial colonies were milky white. SA • Staphylococcus Aureus Agar Based Medium Staphylococcus aureus forms black colonies on the surface of the culture medium, and due to protein breakdown, a transparent hemolysis ring or turbid zone is formed around the Staphylococcus aureus colonies. PD • Yeast, Mold Agar Based Medium Used for the identification of yeast and mold. Usage Method of Contact Agar Medium 4x4 1. Remove the medium from the bag. 2. Open the lid and press the petri dish directly onto the sample to be sampled. 3. Cover the lid, mark it in the blank column of the container, and culture it in the incubator. 4. Colonies were counted after culture. Medium area: 10cm². Product Details of Contact Agar Medium 4x4 Name Characteristics Package Culture time Validity Time Agar Stamp AC Total Bacteria Count Agar 10cm² 10pcs/bag; 100pcs/box 48±2 hours 6 months Agar Stamp EC Coliform group&E.coli Count Agar 10cm² 24 hours Agar Stamp SA Staphylococcus aureus Count Agar 10cm² 24~48 hours Agar Stamp PD Yeast&Mold Count Agar 10cm² 5 days Note: 1. The product should be protected from light and stored at room temperature. 2. It should be used as soon as possible after unpacking. 3. When there are water droplets in the container, please gently remove the water droplets and use. ELEX Biological Products (Shanghai) Co., Ltd., established in 2013, is a colony counter manufacturer, which specializes in sales, research and development of microbiological test products for food hygiene testing and environment testing, simultaneously act as an agency of microbial testing equipment from ELMEX Corporation of Japan. The factory has passed ISO9001:2015, and the products have passed the strict assessment of the quality management of the Japanese food industry and are favored by the industry. Its top popular product---ST swab sampler series account for 70% of the market rate in Japan. Minimum Order: 100000 Contact:
Phone: Fax: Email: Elex Biological Products (Shanghai) Co., Ltd.
Room E121, No. 2800, Wanyuan Road, Minhang District, Shanghai City, P.R. China Shanghai 201100 China 10/30/20 1:29 GMT
Contact Agar Medium 5x5
Performance Characteristics of Contact Agar 5x5 Media 1. It is widely used in environmental sanitation, apparatus, sedimentation bacteria and hand colony inspection. 2. It can be used directly after opening, no need to prepare medium which saves time and effort. 3. The medium area is 24 cm². It is divided into several small cells which are easy to count. Agar Medium Type AC• Standard Plate Counting Agar Medium Used for the identification of the total bacteria number. EC•Three-color agar medium Escherichia coli and coliforms are simultaneously detected. E.coli colonies are blue to light purple. Coliform colonies are red to purple. Other intestinal bacterial colonies were milky white. SA•Staphylococcus aureus agar medium Staphylococcus aureus forms black colonies on the surface of the culture medium, and due to protein breakdown, a transparent hemolysis ring or turbid zone is formed around the Staphylococcus aureus colonies. PD•Yeast, mold agar medium For the identification of yeast and mold. Usage Method of Contact Agar Medium 5x5 1. Remove the medium from the bag. 2. Open the lid and press the petri dish directly onto the sample to be sampled. 3. Cover the lid, mark it in the blank column of the container, and culture it in the incubator. 4. Colonies were counted after culture. Medium area: 24 cm². Product Details of Contact Agar Medium 5x5 Name Characteristics Package Culture time Validity Time Agar Stamp AC Total Bacteria Count Agar, 10cm² 10pcs/bag; 100pcs/box 48±2 hours 6 months Agar Stamp EC Coliform group&E.coli Count Agar, 10cm² 24 hours Agar Stamp SA Staphylococcus aureus Count Agar, 10cm² 24~48 hours Agar Stamp PD Yeast&Mold Count Agar, 10cm² 5 days Note: 1. The product should be protected from light and stored at room temperature. 2. It should be used as soon as possible after unpacking. 3. When there are water droplets in the container, please gently remove the water droplets and use. ELEX Biological Products (Shanghai) Co., Ltd., established in 2013, is a colony counter manufacturer, which specializes in sales, research and development of microbiological test products for food hygiene testing and environment testing, simultaneously act as an agency of microbial testing equipment from ELMEX Corporation of Japan. The factory has passed ISO9001:2015, and the products have passed the strict assessment of the quality management of the Japanese food industry and are favored by the industry. Its top popular product---ST swab sampler series account for 70% of the market rate in Japan. Minimum Order: 100000 Contact:
Phone: Fax: Email: Elex Biological Products (Shanghai) Co., Ltd.
Room E121, No. 2800, Wanyuan Road, Minhang District, Shanghai City, P.R. China Shanghai 201100 China 10/30/20 1:28 GMT
Colony Counter
colony counter machine Smart iSac Simple Calculation 1. Simple Count Simultaneous calculation of 6 sheet medium; Correct the value of each medium; The result can be preserved as portrait data; The result cannot generate data documents; There are simultaneous counting functions of 6 sheet medium and a correction function for each medium value; Simply input an existing job. Smart iSac Total Calculation 1. Simple count 2. OCR method Read 8 lines of numbers and automatically generates data documents. Automatically record bacterial numbers and image data The result can be output as a CSV file 8-line QR code for parallel use 3. Barcode method After the data is generated, the QR code can be used to generate the data document. Automatic recording of bacterial number and image data The result can be output as a CSV file Equivalent media with other company Other company ELEX 3M TM culture media plate TM agar DNP Media·Ca culture media plate AC culture media plate for total bacteria number Media·Ca AC for total bacteria number RAC culture media plate for rapid measuring bacteria number / CC culture media plate for coliforms number Media·Ca CC for coliforms EC culture media plate for g E.coli and EC coliform Media·Ca EC for E.coli and coliforms STX culture media plate for S. aureus assay Media·Ca SA for Staphylococcus aureus AQHC test piece for the identification of bacteria number in the water (subordinate vegetative bacteria) Counting System Counting system simultaneous calculations of 6 sheet test piece Calculated value correction Data Preservation Original document Automatic document Colony conversion Qualified judgment CSV document Simple count ○ ○ ○※2 × × × × × OCR method ○ ○ ○ × ○ ○ ○ ○ Barcode method ○ ○ ○ ○ ○ ○ × ○ ※ 2 can be preserved as portrait data. Specification of Automatic Bacterial Colony Counter Name Code No. Content Counting System Simple Count OCR method Barcode method Smart iSac simple calculation C001-5S Laptop ○ × × Scanner Smart iSac total calculation C001-5M Laptop ○ ○ ○ Scanner QR CODELEADER Performance Characteristics of Automatic Bacterial Colony Counter 1. Rapid bacterial counting The processing capacity of simultaneous counting of 6 sheet culture media plate is about 6 times of the visual counting, which can further achieve the function of improving accuracy by the new technology; Culture media plate is used with DNP Media·Ca media, and 6 sheets can be read simultaneously by scanning. If the range and sensitivity of the count size need to modify, you can click on the above image and make the subtle adjustments by manual operation. Performance Characteristics 2. Data Preservation and Verification Check data records, agar images, and calculated values, etc; Preserve past data to reconfirm and compare; The result can be output as a CSV file; The result also can be converted to EXCEL and other files. 3. Massive Data Sharing Set up a computer as server management or use a cloud server to achieve the headquarters' management of each factory. ELEX Biological Products (Shanghai) Co., Ltd., established in 2013, is a colony counter manufacturer, which specializes in sales, research and development of microbiological test products for food hygiene testing and environment testing, simultaneously act as an agency of microbial testing equipment from ELMEX Corporation of Japan. The factory has passed ISO9001:2015, and the products have passed the strict assessment of the quality management of the Japanese food industry and are favored by the industry. Its top popular product---ST swab sampler series account for 70% of the market rate in Japan. Minimum Order: 100000 Contact:
Phone: Fax: Email: Elex Biological Products (Shanghai) Co., Ltd.
Room E121, No. 2800, Wanyuan Road, Minhang District, Shanghai City, P.R. China Shanghai 201100 China 10/27/20 2:09 GMT
SMC Cable Braket
The SMC cable bracket is a combination consisting of a cable bracket, a post and a fixed pin. The material of the column and the pin is also made by the high temperature pultrusion of the FRP composite. The column can be arbitrarily cut length according to the needs, the height of the layer is adjusted, and the assembly is free. The cable bracket has various specifications to meet different lengths and load requirements. Light weight, high strength, aging resistance, UV protection, more importantly, 1 mm can withstand voltages above 10,000 volts, it is a good insulation material. Features: high insulation, chemical resistance, high fire resistance, good water resistance, accurate size, stable working performance, light weight, high strength, acid and alkali resistance, waterproof, moisture-proof. SMC Cable Braket Specification Project SMC Cable Braket Galvanized angle bracket Density (g/cm3) 1.80 7.85 Specific strength 167 90 Corrosion resistance (80°/100h) 0.012 0.023 Insulation strength (kv/mm) 14.0 Conductive Flame retardancy meets the FH-1 -- Water resistance (%) 0.11 -- Corrosion resistance Corrosion、acid、alkali、salt resistant Corrosive, easy to rust insulation insulation Conduction Mechanical strength Top force 2.5kN deflection 1.0cm Top force 2.5kN deflection 1.2cm Lateral force 0.5kN Top horizontal offset 7cm Top horizontal offset 7cm Weight light weight Eddy current effect (loss) no Large loss Manufacturing process is difficult easy Many processes and long cycle Cable outer sheath scraping test No visible damage There is a little visible damage Raw material Cheap, resource-rich More expensive, partially imported Maintenance Free maintenance 5-7 years need to be repaired once Installation process is difficult or easy Short time and easy to install Long time, difficult to install Use life 30 years 10 years SMC and BMC composite require heating rather than cooling systems. The temperature of the mold is usually between 130 and 160. It is very important to keep the temperature of the mold and the exhaust gas when designing the mold. The mold is easier to fill, the product is not easy to be deformed, and the surface is better. Commonly used heating systems are steam, oil and electric heating rods. Established in 2010 and located in Chengnan Development Zone, Luoshe Town, Huzhou City, Zhejiang Province, Zhejiang Aobang Technology Co., Ltd. has extensive bulk molding compound process and many refined testing laboratories as a spinal column in the industry. Whether at home or abroad, Zhejiang Aobang Technology Co., Ltd. can manufacture top quality bmc compound molds with advanced mold making concept, proprietary application technology and production technology. By the way, being a high-tech enterprise, it is a fact that this company enjoys a good fame in the new motor and energy automobile industry in Hangzhou. Minimum Order: 1 bags Contact:
Phone: Fax: Email: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD
No.62,zhidailang,sha village,luoshe town, deqing huzhou 313218 China 10/27/20 2:05 GMT
SMC/BMC Antenna Reflector
(1) High precision, high efficiency, and high gain. The most important job of using SMC/BMC for the manufacture of antennas is to fully exploit its features and achieve high precision in antenna design from product design and process. Under the condition that the shrinkage ratio of the material and the SMC / BMC molding shrinkage rate have been considered in the mold size design, the SMC/BMC reflector surface has a smaller shape from the original design paraboloid after molding. That is, the accuracy of the SMC/BMC molded antenna is completely guaranteed by the accuracy of the mold. The rms value of the SMC/BMC antenna molded integral reflection surface is 0.25 mm, and the rms value of the single-piece reflection surface of the split antenna is less than 0.3 mm, and the rms value of the reflective surface after assembly is less than 0.6 mm. (2) Corrosion resistance Conventional antenna materials such as aluminum plates and steel plates are made of metal materials, not as good as SMC/BMC which as a non-metal dielectric composite material in terms of acid resistance, alkali, salt, and corrosion resistance. The Pikington laboratory in the United States used infrared to analyze the surface of SMC/BMCmaterials and found that its surface is covered by additives, resin, and very fine calcium acid filler. It has good acid resistance, water resistance and corrosion resistance. The antenna reflection made by this material is solved the disadvantage of the traditional metal material antenna is easy to corrode. In coastal areas, rainy, humid areas and areas with excessive acid rain, the anti-corrosion advantages of SMC molded antennas are particularly prominent. The SMC/BMC molded antenna samples were placed in 130 highly corrosive chemical environments at an ambient temperature of 50 ° C. The results showed that the test samples showed little or no change. (3) Long life The average aluminum plate antenna is as small as 2-3 years in the coastal area, and more often 4-6 years, and it will generally be damaged by salt spray erosion and aging. The most obvious example is the cable TV (CATV) in Taiwan, which was built earlier than the mainland. It is estimated that there are nearly 1000 satellite TV receiving antennas on the island, all built in the mid-1980s, all of which were aluminum plate antennas, until the early 1990s. , that is, has begun to replace. The service life of SMC molded antennas is generally more than 15 years; PROMLIN's prototype SMC molded antennas in 1985 are still working normally, and they are subject to typhoons and heavy rain every year. (4) Strong wind resistance Since the antenna reflection surface is designed during the molding process, multiple longitudinal and circumferential rib structures are designed. According to the structural strength calculation, the SMC antenna can withstand a wind load of 45 m/s, which shows its remarkable structural rigidity and strength. (5) Special reflective layer technology The reflective surface of the SMC antenna uses a metal aluminum mesh as a reflective layer of electromagnetic waves. The aluminum mesh in the finished antenna is evenly embedded under the surface SMC, which can reflect electromagnetic waves and insulate the atmosphere, and plays a good protective role. (6) Good consistency, no deformation, easy to transport and install Because SMC antenna adopts membrane pressure technology under high temperature and high pressure. Its material properties and processing technology determine the unparalleled consistency of SMC antennas with other antennas. This not only ensures the accuracy and high gain of the antenna, but also is very easy to install and debug. SMC, commonly known as "glass reinforced plastic", has the characteristics of no deformation, which eliminates the adverse effects of antenna deformation on the satellite receiving system during transportation. SMC and BMC composite require heating rather than cooling systems. The temperature of the mold is usually between 130 and 160. It is very important to keep the temperature of the mold and the exhaust gas when designing the mold. The mold is easier to fill, the product is not easy to be deformed, and the surface is better. Commonly used heating systems are steam, oil and electric heating rods. Vacuum assisted systems for BMC and SMC molds: Products with Class A surfaces are usually vacuum-assisted, and the internal cavity and vacuum insulation of the mold are very important. The mold must have a sensor and a vacuum system to measure the mold temperature and pressure vacuum. Production SMC and BMC molding: must guarantee high quality, long life and economy. Aobang Technology Co., Ltd.'s years of experience in the production of SMC and BMC molds and proficiency in machine, mold, material and process can ensure the maximum benefit of customers. Minimum Order: 1 bags Contact:
Phone: Fax: Email: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD
No.62,zhidailang,sha village,luoshe town, deqing huzhou 313218 China 10/27/20 2:04 GMT
BMC/SMC Insulation
High-strength, wear-resistant, fire-resistant, color BMC material for medium and low voltage insulators such as SMC Insulation, bmc insulation. Typical applications are switch boards, busbars, switchgear, etc. BMC (Body Molding Plastics) is a blend of glass fiber reinforced polyester resin and chemical mineral materials with special properties such as electrical insulation, low density, high mechanical strength and fire resistance. High sealing, high safety, low process and low cost. Established in 2010 and located in Chengnan Development Zone, Luoshe Town, Huzhou City, Zhejiang Province, Zhejiang Aobang Technology Co., Ltd. has extensive bulk molding compound process and many refined testing laboratories as a spinal column in the industry. Whether at home or abroad, Zhejiang Aobang Technology Co., Ltd. can manufacture top quality composite molds with advanced mold making concept, proprietary application technology and production technology. By the way, being a high-tech enterprise, it is a fact that this company enjoys a good fame in the new motor and energy automobile industry in Hangzhou. SMC and BMC composite require heating rather than cooling systems. The temperature of the mold is usually between 130 and 160. It is very important to keep the temperature of the mold and the exhaust gas when designing the mold. The mold is easier to fill, the product is not easy to be deformed, and the surface is better. Commonly used heating systems are steam, oil and electric heating rods. Vacuum assisted systems for BMC and SMC molds: Products with Class A surfaces are usually vacuum-assisted, and the internal cavity and vacuum insulation of the mold are very important. The mold must have a sensor and a vacuum system to measure the mold temperature and pressure vacuum. Production SMC and BMC molds must guarantee high quality, long life and economy. Aobang Technology Co., Ltd.'s years of experience in the production of SMC and BMC molds and proficiency in machine, mold, material and process can ensure the maximum benefit of customers. Minimum Order: 1 bags Contact:
Phone: Fax: Email: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD
No.62,zhidailang,sha village,luoshe town, deqing huzhou 313218 China 10/27/20 2:03 GMT
BMC, SMC, GRP, GFK Wall Panel
Aobang composite Wall Panel is divided into: BMC Wall Panel, SMC Panel, GRP Wall , GFK Wall Panel. Composite Wall Panel the main functions: use imported silver ion, special effect antibacterial; energy saving; anti-corrosion, waterproof and moisture proof, mildewproof, fireproof; no harmful substances, no formaldehyde; easy to clean and maintain; scratch resistant; can be repeatedly disassembled, easy to repair; low carbon Environmental protection, surface diffuse reflection and energy saving; can be recycled, the economical applicability of building materials, high cost performance; beautiful appearance. Established in 2010 and located in Chengnan Development Zone, Luoshe Town, Huzhou City, Zhejiang Province, Zhejiang Aobang Technology Co., Ltd. has extensive bulk molding compound process and many refined testing laboratories as a spinal column in the industry. Whether at home or abroad, Zhejiang Aobang Technology Co., Ltd. can manufacture top quality bmc compound molds with advanced mold making concept, proprietary application technology and production technology. By the way, being a high-tech enterprise, it is a fact that this company enjoys a good fame in the new motor and energy automobile industry in Hangzhou. SMC and BMC composite require heating rather than cooling systems. The temperature of the mold is usually between 130 and 160. It is very important to keep the temperature of the mold and the exhaust gas when designing the mold. The mold is easier to fill, the product is not easy to be deformed, and the surface is better. Commonly used heating systems are steam, oil and electric heating rods. Vacuum assisted systems for BMC and SMC molds: Products with Class A surfaces are usually vacuum-assisted, and the internal cavity and vacuum insulation of the mold are very important. The mold must have a sensor and a vacuum system to measure the mold temperature and pressure vacuum. Production SMC and BMC molds must guarantee high quality, long life and economy. Aobang Technology Co., Ltd.'s years of experience in the production of SMC and BMC molds and proficiency in machine, mold, material and process can ensure the maximum benefit of customers. Minimum Order: 1 bags Contact:
Phone: Fax: Email: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD
No.62,zhidailang,sha village,luoshe town, deqing huzhou 313218 China 10/27/20 2:02 GMT
BMC, SMC, GRP, GFK Roof Tiles
What is gfk material? Aobang composite roofing tiles is divided into: BMC roofing tiles, SMC roofing tiles, GRP roof tiles, GFK roofing tiles. Due to the excellent properties of BMC, SMC, GRP, GFK materials, it is the best choice for making roof tiles. BMC, SMC, GRP, GFK material is a composite material, mixed with polyester resin, chemical and mineral fillers, technical agents, usually reinforced with GFK fiberglass. It is an excellent material GFK for outdoor applications. It has weather resistance and UV stability and has a service life of more than 30 years in outdoor environments. It absorbs almost no moisture, so it can isolate the moisture from the outdoors to the room. It is water and chemical resistant so acid rain does not affect the surface of the roof. Colors are easily mixed into the BMC, SMC, GRP, GFK material as a pigment, so colored tiles can be easily obtained and the color does not disappear during its lifetime. BMC, SMC, GRP, GFK materials are also fire resistant. If there is no source of burning material around it, it will not spread and will immediately go out. Light weight and high strength are one of the biggest advantages of BMC, SMC, GRP, GFK materials. As the grp roof supplies, this grp roofing materials has a density of 1.7-2.0. It makes the tiles very light. Transportation costs, installation costs, etc. can be reduced. this materials make your roof tiles more colorful, longer lasting and more cost effective. Advantage: Light weight, high strength, aging resistance, UV protection, acid and alkali resistance, waterproof and moisture proof, no fading, low thermal conductivity and energy saving. Established in 2010 and located in Chengnan Development Zone, Luoshe Town, Huzhou City, Zhejiang Province, Zhejiang Aobang Technology Co., Ltd. has extensive bulk molding compound process and many refined testing laboratories as a spinal column in the industry. Whether at home or abroad, Zhejiang Aobang Technology Co., Ltd. can manufacture top quality composite molds with advanced mold making concept, proprietary application technology and production technology. By the way, being a high-tech enterprise, it is a fact that this company enjoys a good fame in the new motor and energy automobile industry in Hangzhou. SMC and BMC composite require heating rather than cooling systems. The temperature of the mold is usually between 130 and 160. It is very important to keep the temperature of the mold and the exhaust gas when designing the mold. The mold is easier to fill, the product is not easy to be deformed, and the surface is better. Commonly used heating systems are steam, oil and electric heating rods. Vacuum assisted systems for BMC and SMC molds: Products with Class A surfaces are usually vacuum-assisted, and the internal cavity and vacuum insulation of the mold are very important. The mold must have a sensor and a vacuum system to measure the mold temperature and pressure vacuum. Production SMC and BMC molds must guarantee high quality, long life and economy. Aobang Technology Co., Ltd.'s years of experience in the production of SMC and BMC molds and proficiency in machine, mold, material and process can ensure the maximum benefit of customers. Minimum Order: 1 bags Contact:
Phone: Fax: Email: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD
No.62,zhidailang,sha village,luoshe town, deqing huzhou 313218 China 10/27/20 2:01 GMT
BMC, SMC, GRP, GFK Ceiling
Aobang composite ceiling is divided into: BMC ceiling, SMC ceiling, GRP ceiling, GFK Ceiling. The ceiling materials have been developed for more than ten years, and the technology is constantly being updated. The PVC ceiling is not resistant to high temperature, and it is easy to deform in a hot environment. The plastic steel plate is improved from the second generation of ceiling material PVC, which has the advantages of lower price, good thermal insulation and sound insulation, rich color and easy making and installation. However, according to the supervision and inspection results of the plastic sheet market by the Supervisory Office, the quality pass rate of plastic steel products on the market is only 40%, and the phenomenon of “water injection” in bending strength, coating thickness and alkali resistance is serious. Moreover, the plastic steel sheet has low strength, is easily twisted, is not environmentally friendly, has poor weather resistance, and releases toxic gases when burned. The physical properties of the composite material aggregate ceiling are very stable, and will not be deformed even if the water is long time. The composite ceiling is an excellent material for the ceiling and naturalization board in terms of strength and rigidity. The ceiling uses BMC,SMC,GRP,GFK bulk molding compound as a completely environmentally friendly material, and its advantages are numerous, as follows: Beautiful, moisture-proof, easy to clean, excellent flame retardant effect, high strength, long life, high environmental protection, easy installation, moisture-proof and waterproof, heat insulation, corrosion resistance, tight connection, oxidation resistance, anti-aging, no deformation, high strength, Light and tough, with natural texture and wooden texture, a variety of colors, natural and beautiful, with a variety of specifications, size, shape, thickness, the same processing properties as logs, no pollution, recycling, no cracks, no expansion, no deformation, no maintenance, no mold, anti-corrosion, anti-insect, anti-termite, energy saving. What is important is the low material cost of BMC,SMC,GRP,GFK molding compound, making it a cost-effective ceiling material than such as steel-plastic panels, aluminum gussets, and aluminum alloys. The visual effect is soft, feels good, high strength, flame retardant, fireproof, and has strong weather resistance. Excellent insulation and heat insulation performance, which overcomes the poor thermal insulation performance of traditional ceilings. Good water resistance, no corrosion, no deformation, no fading and no other undesirable phenomena in a humid environment. Excellent sound absorption, it is a good sound insulation material, suitable for public places such as medium and high-grade office buildings and large conference halls. Established in 2010 and located in Chengnan Development Zone, Luoshe Town, Huzhou City, Zhejiang Province, Zhejiang Aobang Technology Co., Ltd. has extensive bulk molding compound process and many refined testing laboratories as a spinal column in the industry. Whether at home or abroad, Zhejiang Aobang Technology Co., Ltd. can manufacture top quality composite molds with advanced mold making concept, proprietary application technology and production technology. By the way, being a high-tech enterprise, it is a fact that this company enjoys a good fame in the new motor and energy automobile industry in Hangzhou. SMC and BMC composite require heating rather than cooling systems. The temperature of the mold is usually between 130 and 160. It is very important to keep the temperature of the mold and the exhaust gas when designing the mold. The mold is easier to fill, the product is not easy to be deformed, and the surface is better. Commonly used heating systems are steam, oil and electric heating rods. Vacuum assisted systems for BMC and SMC molds: Products with Class A surfaces are usually vacuum-assisted, and the internal cavity and vacuum insulation of the mold are very important. The mold must have a sensor and a vacuum system to measure the mold temperature and pressure vacuum. Production SMC and BMC molds must guarantee high quality, long life and economy. Aobang Technology Co., Ltd.'s years of experience in the production of SMC and BMC molds and proficiency in machine, mold, material and process can ensure the maximum benefit of customers. Minimum Order: 1 bags Contact:
Phone: Fax: Email: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD
No.62,zhidailang,sha village,luoshe town, deqing huzhou 313218 China 10/27/20 2:00 GMT
BMC, SMC, GRP, GFK Building & Decoration Materials
Aobang composite Building Decoration materialis divided into: BMC building decoration material, SMC building decoration material, GRP building decoration material, GFK building decoration material. Building decoration materials may have heard of commonly used bmc materials such as sandstone and cement. BMC, SMC, GRP, and GFK composite materials have been heard by few people. It is a new type of material. What are the advantages? 1. Short molding cycle, can be molded or injected, suitable for mass production. 2. A large amount of filler can be added to meet the requirements of flame retardancy and dimensional stability, and the cost is low. 3. Complex products can be integrally formed, and inserts, holes, tables, ribs, grooves, etc. can be molded at the same time. 4. Compared with ordinary thermoplastics, the heat resistance, insulation and modulus of elasticity of the products are higher. 5. The skills of workers are not high, and it is easy to automate and save labor. 6. The size of the product is accurate. 7. The working environment is good. It can be known that it is resistant to water and oil and excellent corrosion resistance, and its heat resistance and good electrical properties are its advantages, making it stand out in the highly competitive material market. In addition, it can be further found that the composite material has higher requirements for the post-use environment than other materials. We can provide GRP building products for you. SMC and BMC composite require heating rather than cooling systems. The temperature of the mold is usually between 130 and 160. It is very important to keep the temperature of the mold and the exhaust gas when designing the mold. The mold is easier to fill, the product is not easy to be deformed, and the surface is better. Commonly used heating systems are steam, oil and electric heating rods. Vacuum assisted systems for SMC and BMC molding: Products with Class A surfaces are usually vacuum-assisted, and the internal cavity and vacuum insulation of the mold are very important. The mold must have a sensor and a vacuum system to measure the mold temperature and pressure vacuum. Production SMC and BMC molds must guarantee high quality, long life and economy. Aobang Technology Co., Ltd.'s years of experience in the production of SMC and BMC molds and proficiency in machine, mold, material and process can ensure the maximum benefit of customers. Minimum Order: 1 bags Contact:
Phone: Fax: Email: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD
No.62,zhidailang,sha village,luoshe town, deqing huzhou 313218 China 9/29/20 9:14 GMT
STANDARD SAPPHIRE WAFERS (C-PLANE)
CRYSCORE can offer Epi-Ready grade sapphire wafer with a very low surface roughness in complete orientation options. C-plane(0001) sapphire wafers are being extensively used for epitaxial growth of III-V and II-VI compounds, such as gallium nitride (GaN), aluminum nitride (AlN), for bright blue and green LED and laser diodes. Technical Applications of Standard Sapphire Wafers C-plane sapphire wafers are widely used to grow III-V and II-VI deposited films of wide band-gap nitride and oxide semiconductor materials such as gallium nitride (GaN), aluminum nitride (AlN), indium nitride (InN), zinc oxide (ZnO ultraviolet light emission) and tin oxide (SnO2 ultraviolet luminescent material), etc. In addition, standard C-plane(0001) sapphire wafers are widely applied to fabricate LED white and blue light, ultraviolet and deep UV LED epitaxial wafers by Metal-Organic Vapor Deposition(MOCVD), Molecular Beam Epitaxy (MBE), Plasma Enhanced Chemical Vapor Deposition(PECVD) and other epitaxy growth methods. CRYSCORE standard sapphire wafers also are used as the substrates of heterojunction bipolar transistor (HBT), a laser diode (LD), UV detector, nanotube, and the heat dissipation material of high temperature and high power high-frequency electronic device. Competitive Advantages of CRYSCORE's Sapphire Wafers 99.999 % high purity single crystal Al2O3 material. Special CMP (Chemical Mechanical Polishing) technology to ensure its performance at a low cost. Excellent surface quality in all orientations (less than 0.2 nm for C-plane, less than 0.5 nm for A-plane, M-plane, R-plane, N-plane, V-plane, 10-14, etc.) Cleaned in class 100 cleanroom by ultrapure water with quality above 18MΩ *cm. 25 pcs a pack or single pack is available to maximize customer flexibility in their research. Traceable product serial number. Compact carton packaging for safer shipping and cost-saving. Standard wafers are Generally in stock to ensure a quick delivery. As a professional sapphire wafer supplier, CRYSCORE aims to provide customers with the best products and services, and let our technology benefits the world. We provide sapphire substrates,c plane sapphire substrate,c plane sapphire and Al2O3 substrate,RFQ today. Minimum Order: 1 bags Contact:
Phone: Fax: Email: CRYSCORE OPTOELECTRONIC LIMITED
No. 49, Jiefang East Road, Shanyang District, JIAOZUO HENAN 454000 China ![]() SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
© 1996-2025 IMEXBB.com. All rights reserved.
|
![]()
|