Chemical Equipment & Lab Supplies

Micron-level Adjustable Film Applicator-width 100mm Adjustable Film Applicator-This is a unique wet film forming tool that can adjust the film thickness with a micrometer. The operator can adjust the gap between the scraper and the coated surface through a micrometer. This tool is especially suitable for laboratory production of battery electrodes, pre-ceramic tape and various films. Main feature 1. Width 100mm 2. A slurry guide plate is installed to make the film making easier 3. The gap between the scraper and the coated surface: 0-3500um 4. Micrometer adjustment head, the adjustment accuracy is 10um 5. Made of SS304 stainless steel

Minimum Order: 1 bags

Micron-level adjustable film applicator-width 50mm Adjustable film applicator-This is a unique wet film forming tool that can adjust the film thickness with a micrometer. The operator can adjust the gap between the scraper and the coated surface through a micrometer. This tool is especially suitable for laboratory production of battery electrodes, pre-ceramic tape and various films. Main feature 1. 50mm wide 2. Gap between scraper and coated surface: 10-5000um 3. Made of 304 stainless steel

Minimum Order: 1 bags

Micron-level adjustable 4-station film applicator (for high-throughput tape casting coating, single-station: 25mm wide) Se-KTQ-4-25 is a micron-level adjustable 4-station film applicator, which can be used in combination with our tape casting film coater to apply 4 different materials samples at one time, shorten the experimental period. Main feature 1. 4-position film applicator, capable of coating 4 different material samples at one time 2. Width of single station: 25mm 3. Gap between doctor-blade and coated surface: 0-3500 μM 4. Micrometer adjusting head, adjusting accuracy of 10 μM 5. Made of SS304 stainless steel Specifications Dimensions：130mmL*97mmW*95mmH Weight：~2 , kg

Minimum Order: 1 bags

4-sided precision micron film applicator has 4 surfaces, and the coating thickness of each surface has different film thickness. See Table 2 for details.This film applicator has two kinds of width, one is 100mm wide, and the effective coating width is 80mm. The other is a width of 190mm, the effective coating width is 160mm. Features 1. Made of high quality stainless steel, more wear-resistant and corrosion- resistant than the ordinary 304 stainless steel. 2. The film thickness is uniform, which is suitable for preparing paint film or thick film. Application The film applicator is mainly used for coating even paint, adhesive and other similar products on flat substrate; the four side film applicator can realize diversified coating and can coating four different specifications of wet film with high precision, which is mainly suitable for matching use with our doctor-blade film coater. Specifications and parameters Table 1： the film applicator precision SPEC 5 10 15 20 25 37.5 50 75 100 125 150 200 250 300 400 500 Accuracy ±1 ±1 ±2 ±2 ±3 ±3 ±3 ±3 ±3 ±4 ±4 ±5 ±5 ±6 ±8 ±10 Table 2 NO. coating thickness（μm） width（mm） Total width（mm） 1 5-10-15-20（ 80 100） 2 10-15-20-25 3 20-40-60-80 4 25-50-75-100 5 30-60-90-120 6 50-75-100-150 7 50-100-150-200 8 100-150-200-250 9 100-200-300-400 10 250-500-750-1000 11 20-40-60-80 （ 160 190） 12 25-50-75-100 13 30-60-90-120 14 50-100-150-200 15 100-150-200-300 16 100-200-300-400

Minimum Order: 1 bags

cost effective Gas float flowmeter for TN's CVD/PECVD/Graphene furnace to control the gas flowing rate for different research purposes. Feature Variety gas way for option 304 stainless steel pipe core, corrosion resistance Stainless steel double card quick connector, easy to connect, and no leakage Application 1.Semiconductor manufacturing industry 2.Vacuum coating equipment 3.Special material surface treatment 4.Gas combustion control 5.Leakage detection system 6.Environment detection and analysis equipment 7.Chemical, petrochemical, metallurgy, optical fiber and etc Technical parameter Model: TN-3F Gas channel: 3-channel Measuring unit: Gas float flowmeter Measuring range A channel: 0～100ml H2 gas B channel: 16～160ml N2 gas C channel: 25～250ml Ar gas measurement accuracy: ±2.0% Pipe pressure resistance: 3MPa Working pressure: 50～300KPa Connecting pipe: 304 stainless steel Gas channel: 304 stainless steel needle valve Interface specification: 1/4" ferrule connector for gas inlet and outlet Remarks: If you need other ranges or gas types, you need to specify when ordering. According to the customer's specific requirements, the flow meter of the corresponding gas type and range can be selected.

Minimum Order: 1 bags

Cost effective Gas mass flowmeter for TN's CVD/PECVD/Graphene furnace to control the gas flowing rate for different research purposes. Feature Variety gas way for option 304 stainless steel pipe core, corrosion resistance Stainless steel double card quick connector, easy to connect, and no leakage Application 1.Semiconductor manufacturing industry 2.Vacuum coating equipment 3.Special material surface treatment 4.Gas combustion control 5.Leakage detection system 6.Environment detection and analysis equipment 7.Chemical, petrochemical, metallurgy, optical fiber and etc Technical parameter Model CY-3Z Gas channel 3-channel Measuring unit Gas mass flowmeter Measuring range A channel: 0～100SCCM H2 gas B channel: 0～300SCCM N2 gas C channel: 0～500SCCM Ar gas measurement accuracy ±1.0%F.S Pipe pressure resistance 3MPa Working pressure 50～300KPa Connecting pipe 304 stainless steel Gas channel 304 stainless steel needle valve Interface specification 1/4" ferrule connector for gas inlet and outlet Remarks: If you need   other ranges or gas types, you need to specify when ordering. According to the customer's specific requirements, the flow meter of the corresponding gas type and range can be selected.

Minimum Order: 1 bags

Two-channel mass flowmeter This proportioner is suitable for low pressure and small flow, multiple gas single/mixed continuous gas supply systems. It is especially convenient to switch a variety of gases without causing the atmosphere to enter the heating tube. The gas flow can be read on the same plane, and the digital display of the digital tube is highlighted, and the appearance is beautiful and practical, and the operation is simple. The gas flow rate is accurate and the control accuracy is high, which can effectively control the gas intake amount. All inlet and outlet ports and valve connections are connected by unions for easy maintenance and disassembly. Working principle The two (or more) kinds of gases in gas cylinder are decompressed through the pressure reducing valve to the required pressure (0.05MPa~0.3Mpa) and input to the gas mixing proportioner, and then by adjusting the volume flow of each component, the mixed gas of the predetermined proportional relationship is output to achieve the atmosphere required by the experiment. It is strictly forbidden to supply hydrogen and oxygen at the same time to ensure safety. The gas channel diagram is as follows: Technical parameters Valve type Flowmeter comes with solenoid valve Number of gas channels 2 channels Pressure range 0.05~0.3MPa A-channel range Customized 0~1000 SCCM (H2) B-channel range Customized 0~1000 SCCM (Ar) Flow control range ±1.5% Gas mixing tank volume 750mL Gas channel material 304 stainless steel Pipe interface 6.35mm ferrule connector Power supply AC220V 50Hz

Minimum Order: 1 bags

Name Automatic diamond wire cutting machine Model CY-DWC300-A Features 1. The cutting size can reach 12". (max) 2. The main motor drives the diamond cutting line to move downward at a constant speed, and the material is fixed on the worktable to ensure stable cutting. 3. The worktable can be adjusted by 360° rotation manually or through program control. 4. The pneumatic tensioning system is adopted and imported pneumatic components are used to make the tensioning force more stable and reliable. 5. PLC program control system and large-size touch screen make the operation simple and quick. 6. Various tooling fixtures can be designed according to your needs. Functions 1.Ceramic materials: alumina ceramics, zinc oxide ceramics, zirconia ceramics, target ceramics, honeycomb ceramics, semiconductor ceramics, conductive ceramics, non-conductive ceramics, etc; 2. Crystal material: graphite, silicon crystal (solar polysilicon, monocrystalline silicon), sapphire, alumina crystal, infrared glass crystal, alumina crystal, silicon carbide crystal, cesium iodide crystal, etc.; 3. Glass materials: chalcogenide glass, optical glass, quartz glass, infrared glass, glass tube, etc.; 4. Metal materials: iron, aluminum, copper, titanium alloy, magnesium alloy and other metals and alloys, non-ferrous metals (zinc sulfide, ferrite), etc.; 5. Composite materials: PVC board, carbon fiber composite material, glass fiber composite material, etc. 6. Rock materials: precise sections of natural rocks, jade, meteorite, Peicui, agate and other high-value materials; geological optical slices, geological thin sections (sedimentary rocks, magmatic rocks, metamorphic rocks, ores), etc.. 7. Thermoelectric materials: bismuth telluride, lead telluride, silicon germanium alloy, etc. 8. Infrared optical materials: zinc selenide, zinc sulfide, silicon, germanium and other crystals 9. Biomedical materials:Bioplasticization specimen sections (human animal organs, jaw joint sections of soft and hard tissues, implant observation, tooth crown and bridge, teeth and other histological specimens);Combined sections of soft and hard tissues in orthopedics department (fresh tissues and hard tissues such as femur, hip joint and vertebral body, bone histological samples with implants, etc.); Cardiac and cerebrovascular stent section, stone section and other medical tissue sections;; Parameters 1. Power supply: 220 V 50 Hz; 2. Power: < 550W (max); 3. Spindle motor: AC frequency conversion motor, Power 400W; 4. Y, Z, R axis motor: precision stepping motor; 5. Cutting wire speed: 0-8m / s adjustable, digital display; 6. Total length of cutting line: ≤ 150m; 7. Cutting line diameter: ≤ 0.45mm; 8. Y axis travel: ≤ 300 mm, digital display; 9. Z axis travel: ≤ 300 mm, digital display; 10. Y, Z axis feed indication accuracy: 0.01mm; 11. Worktable angle: 0-360°, resolution 0.01°, digital display; 12. Repeated positioning accuracy of worktable: < 0.032° 13. Cutting sample size: Ø 300 mm × 300 mm (max); 14. Tension system: pneumatic tension, tension pressure adjustment range 0-1mpa; 15. Safety control device: self stop and emergency stop switch of line break SPEC Size ：1000mm×900mm×1700mm； Weight About 500kg Standard accessory Tension pulley 2 pieces Guide wheel 2 pieces Diamond wire 2 rolls Water pump 1 set Resin ceramic block 2 pieces Paraffin wax stick 4 pieces Optional accessory 1. Diamond wire (Ø 0.125mm, Ø 0.25mm, Ø 0.35mm, Ø 0.42mm) 2. Cutting oil 3. STX-1200-YB wire cutting machine swing mechanism (especially suitable for cutting high-hardness materials, such as gems, jade, etc., or low-hardness graphite, KDP, etc.) 4. STX-1200-A axis swing rotating mechanism (especially suitable for cutting high hardness materials, such as jade, etc.) 5.CYKY series heating platform 6. Silent oil free air compressor 7. DX-100 single crystal orientation instrument

Minimum Order: 1 bags

Name Automatic diamond wire cutting machine Model CY-DWC300-A Features 1. The cutting size can reach 12". (max) 2. The main motor drives the diamond cutting line to move downward at a constant speed, and the material is fixed on the worktable to ensure stable cutting. 3. The worktable can be adjusted by 360° rotation manually or through program control. 4. The pneumatic tensioning system is adopted and imported pneumatic components are used to make the tensioning force more stable and reliable. 5. PLC program control system and large-size touch screen make the operation simple and quick. 6. Various tooling fixtures can be designed according to your needs. Functions 1.Ceramic materials: alumina ceramics, zinc oxide ceramics, zirconia ceramics, target ceramics, honeycomb ceramics, semiconductor ceramics, conductive ceramics, non-conductive ceramics, etc; 2. Crystal material: graphite, silicon crystal (solar polysilicon, monocrystalline silicon), sapphire, alumina crystal, infrared glass crystal, alumina crystal, silicon carbide crystal, cesium iodide crystal, etc.; 3. Glass materials: chalcogenide glass, optical glass, quartz glass, infrared glass, glass tube, etc.; 4. Metal materials: iron, aluminum, copper, titanium alloy, magnesium alloy and other metals and alloys, non-ferrous metals (zinc sulfide, ferrite), etc.; 5. Composite materials: PVC board, carbon fiber composite material, glass fiber composite material, etc. 6. Rock materials: precise sections of natural rocks, jade, meteorite, Peicui, agate and other high-value materials; geological optical slices, geological thin sections (sedimentary rocks, magmatic rocks, metamorphic rocks, ores), etc.. 7. Thermoelectric materials: bismuth telluride, lead telluride, silicon germanium alloy, etc. 8. Infrared optical materials: zinc selenide, zinc sulfide, silicon, germanium and other crystals 9. Biomedical materials:Bioplasticization specimen sections (human animal organs, jaw joint sections of soft and hard tissues, implant observation, tooth crown and bridge, teeth and other histological specimens);Combined sections of soft and hard tissues in orthopedics department (fresh tissues and hard tissues such as femur, hip joint and vertebral body, bone histological samples with implants, etc.); Cardiac and cerebrovascular stent section, stone section and other medical tissue sections;; Parameters 1. Power supply: 220 V 50 Hz; 2. Power: < 550W (max); 3. Spindle motor: AC frequency conversion motor, Power 400W; 4. Y, Z, R axis motor: precision stepping motor; 5. Cutting wire speed: 0-8m / s adjustable, digital display; 6. Total length of cutting line: ≤ 150m; 7. Cutting line diameter: ≤ 0.45mm; 8. Y axis travel: ≤ 300 mm, digital display; 9. Z axis travel: ≤ 300 mm, digital display; 10. Y, Z axis feed indication accuracy: 0.01mm; 11. Worktable angle: 0-360°, resolution 0.01°, digital display; 12. Repeated positioning accuracy of worktable: < 0.032° 13. Cutting sample size: Ø 300 mm × 300 mm (max); 14. Tension system: pneumatic tension, tension pressure adjustment range 0-1mpa; 15. Safety control device: self stop and emergency stop switch of line break SPEC Size ：1000mm×900mm×1700mm； Weight About 500kg Standard accessory Tension pulley 2 pieces Guide wheel 2 pieces Diamond wire 2 rolls Water pump 1 set Resin ceramic block 2 pieces Paraffin wax stick 4 pieces Optional accessory 1. Diamond wire (Ø 0.125mm, Ø 0.25mm, Ø 0.35mm, Ø 0.42mm) 2. Cutting oil 3. STX-1200-YB wire cutting machine swing mechanism (especially suitable for cutting high-hardness materials, such as gems, jade, etc., or low-hardness graphite, KDP, etc.) 4. STX-1200-A axis swing rotating mechanism (especially suitable for cutting high hardness materials, such as jade, etc.) 5.CYKY series heating platform 6. Silent oil free air compressor 7. DX-100 single crystal orientation instrument

Minimum Order: 1 bags

Metallographic sample cutting machine CY-5000B is suitable for precise non- deformation cutting of metals, electronic components, ceramic materials, crystals, cemented carbide, rock samples, mineral samples, concrete, organic materials, biological materials (tooth, bone) and other materials . The equipment has high positioning accuracy; wide speed range; strong cutting ability; strong circulating cooling system; preset feed speed; touch screen control display, easy to operate and control; automatic cutting can reduce operator fatigue and ensure the consistency of sample making; large and bright cutting room with safety switch. It is an ideal equipment for industrial and mining enterprises and scientific research institutes to prepare high-quality samples. 1. Spindle speed: the user can arbitrarily set between 500-5000r to adapt to material cutting, and the setting is effective when stepless speed regulation is running. 2. Cutting stroke: range 0-200mm, set an appropriate stroke to stop cutting when cutting is completed, continuous cutting of the same sample does not need to reposition. 3. Cutting speed: range 0.01-3mm/s, select the cutting speed suitable for the material to meet the material cutting requirements, and the setting is invalid during operation. 4. Retreat speed: range 0-15mm/s, which refers to the speed of retreating to the starting point of cutting when the cutting runs to the set distance. The larger the setting distance, the faster when returning. 5. Jog speed: range 0-15mm/s, which refers to the manual forward and backward speed. If you are not familiar with the operation of the equipment, you should set smaller jog speed to avoid the cutting piece from hitting the workpiece. 6. Cutting mode selection: direct cutting and impact cutting are two modes for users to choose, which can meet the cutting of materials in a wider range 7. Direct cutting: It is the common and most economical cutting mode, suitable for cutting most materials. , 8. Impact cutting: It is suitable for a certain specific material and material with high hardness that can not find a suitable cutting blade, and the worn material is easy to block the cutting blade, or the abrasive of the cutting blade is insufficient, impact cutting may result in a higher cutting blade Wear, but will reduce the risk of overheating the workpiece. 9. Cutting distance: range 0.1-2mm, only effective for impact cutting mode, the smaller the set distance, the faster the impact cutting speed, and the cutting speed of the workpiece is related to the set cutting speed. Main technical parameters: Cutting disc Standard φ200xφ32x0.9 Spindle speed 500-5000r/min Feed rate 0.01-3mm/s Manual feed speed 0-15mm/s Retreat speed 0-15mm/s Impact cutting distance 0.1-2mm Cutting stroke (Y axis) 200mm Max. cutting diameter φ60mm Max. clamping length of worktable 150mm Max. clamping width of worktable 200mm Servo motor Power: 1.1kw Use method data Can store 12 types Power supply: AC220V 50HZ Dimensions 750×860×430mm Weight 126KG

Minimum Order: 1 bags

Digital Low Speed Diamond Saw with Three 4" Precision Blades & Complete Accessories - CY-SYJ-150 CY-SYJ-150 is CE certified low-speed diamond cutting machine, which equips with the advanced digital micrometer and digital speed display controller, it is the perfect tool for cutting/dicing/slicing all kinds of materials up to 32.5 mm thickness, especially for brittle crystals, ceramics, TEM samples, and even plastic samples. Also this cutting machine can be used for cutting cylindrical cell for failure analysis Technical parameter of cutting machine 1. Model No. SYJ-150 2. Working voltage AAC 110V/220V switchable for worldwide usage 110VDC Motor 8Amp fuse installed 3. Speed range 0~600rpm with LED Digital display 4. Cutting width&Depth The cutting width of the slice is controllable from 1mm ~ 24mm by adjusting the LCD digital micrometer. The LCD micrometer is waterproof with a resolution of 0.001 mm and accuracy of +/-0.003 mm. 32.5mm max. cutting depth (when using 35mm Dia. blade flange) 5. Diamond blades Three blades are included for cutting various materials SiC blade: 4" x 0.35 mm x 0.5" Arbor for cutting nonferrous metal materials, such as superalloys. Al2O3 blade: 4" x 0.35 mm x 0.5" Arbor for cutting ferrous metal materials, such as iron and steel. Full sintered diamond blade: 4" x 0.35 mm x 0.5" arbor for cutting crystal, ceramic, and plastic materials 6. Sample Holder & Mini-vise Two angles adjustable sample holder is included, please click picture below for the details (max. opening 26mm) One Mini-vise is included, which can be easily adapted onto the sample holder to clamp rod shape specimens with a diameter up to 1'' max. 7. Package Dimensions 19"(L) x 15"(W) x 15"(H)   8. Shipping Weight & Dimension 32 lbs, 18" x 14" x 14" 9. Certification CE Certified.NRTL or CSA certificatin is available  upon request

Minimum Order: 1 bags

Digital Low Speed Diamond Saw with Three 4" Precision Blades & Complete Accessories - CY-SYJ-150 CY-SYJ-150 is CE certified low-speed diamond cutting machine, which equips with the advanced digital micrometer and digital speed display controller, it is the perfect tool for cutting/dicing/slicing all kinds of materials up to 32.5 mm thickness, especially for brittle crystals, ceramics, TEM samples, and even plastic samples. Also this cutting machine can be used for cutting cylindrical cell for failure analysis Technical parameter of cutting machine 1. Model No. SYJ-150 2. Working voltage AAC 110V/220V switchable for worldwide usage 110VDC Motor 8Amp fuse installed 3. Speed range 0~600rpm with LED Digital display 4. Cutting width&Depth The cutting width of the slice is controllable from 1mm ~ 24mm by adjusting the LCD digital micrometer. The LCD micrometer is waterproof with a resolution of 0.001 mm and accuracy of +/-0.003 mm. 32.5mm max. cutting depth (when using 35mm Dia. blade flange) 5. Diamond blades Three blades are included for cutting various materials SiC blade: 4" x 0.35 mm x 0.5" Arbor for cutting nonferrous metal materials, such as superalloys. Al2O3 blade: 4" x 0.35 mm x 0.5" Arbor for cutting ferrous metal materials, such as iron and steel. Full sintered diamond blade: 4" x 0.35 mm x 0.5" arbor for cutting crystal, ceramic, and plastic materials 6. Sample Holder & Mini-vise Two angles adjustable sample holder is included, please click picture below for the details (max. opening 26mm) One Mini-vise is included, which can be easily adapted onto the sample holder to clamp rod shape specimens with a diameter up to 1'' max. 7. Package Dimensions 19"(L) x 15"(W) x 15"(H)   8. Shipping Weight & Dimension 32 lbs, 18" x 14" x 14" 9. Certification CE Certified.NRTL or CSA certificatin is available  upon request

Minimum Order: 1 bags

15L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned.The device is equipped with a mechanical vacuum pump, while vacuuming maintains the vacuum of the chamber, the pollutants after the plasma reaction can also be pumped away by the vacuum pump; therefore, the short- time cleaning can completely clean the organic pollutants. In addition to the cleaning function, this small plasma cleaner can change the surface properties of some materials according to the needs under certain conditions. During the cleaning process, the glow discharge of the small plasma cleaner not only enhances the adhesion, compatibility and wettability of these materials, but also disinfects and sterilizes the materials. Applications: Small plasma cleaners are widely used in the fields of optics, optoelectronics, electronics, materials science, life sciences, polymer science, biomedicine, and microfluidics. Technical parameter 1. Cleaning the chamber Chamber material Stainless steel Chamber size 220mm*220mm*310mm 2.RF power supply Power supply features The power supply is an all-solid-state RF power supply, and adopts a high-stability and high-reliability power amplifier module and a DC module, which effectively ensures the RF power output of the power supply. High quality electronic components are used to ensure the reliability of the products. Power advantage ● Long time normal operation ● Simple and flexible operation ● High power supply efficiency and low heat generation ●With perfect reflection power protection function RF power 0~300W continuously adjustable，auto-match Signal frequency 13.56MHz ±0.005% Reflected power ≤100W Power stability ±0.1% RF connector N type connector Machine efficiency ≥75% Harmonic component ≤-50 dBc Cooling method Forced air cooling 3.Gas measurement Measuring unit Float flowmeter Gas channel Two channels(O2 和Ar) Vacuum Vacuum measurement Digital vacuum gauge (resistance gauge) Vacuum pump Two-stage rotary vane vacuum pump VRD-4 Motor speed 50 Hz: 1440; 60 Hz: 1720 Pumping rate 50 Hz: 1.1L/s; 60 Hz: 1.3L/s Vacuum range 0.1Pa～10000Pa Ultimate vacuum 0.5Pa Motor noise ≤56dB Pipe interface Gas inlet: KF16; exhaust port KF16. Connecting pipe KF16 vacuum bellows Vacuum valve KF16 ball valve Motor Power 400W 4.Others Power supply AC220V 50Hz Total power 800W Operating temperature -10℃-- 40℃ Working vacuum ≤40Pa Overall size 650mm×650mm×550mm

Minimum Order: 1 bags

5L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned.The device is equipped with a mechanical vacuum pump, while vacuuming maintains the vacuum of the chamber, the pollutants after the plasma reaction can also be pumped away by the vacuum pump; therefore, the short- time cleaning can completely clean the organic pollutants. In addition to the cleaning function, this small plasma cleaner can change the surface properties of some materials according to the needs under certain conditions. During the cleaning process, the glow discharge of the small plasma cleaner not only enhances the adhesion, compatibility and wettability of these materials, but also disinfects and sterilizes the materials. Applications: Small plasma cleaners are widely used in the fields of optics, optoelectronics, electronics, materials science, life sciences, polymer science, biomedicine, and microfluidics. Technical parameters: 1. Cleaning chamber Chamber material High purity quartz Chamber size Diameter 200 mm; Length 170 mm 2. RF power supply Power supply features:The power supply is an all-solid-state RF power supply, and adopts a high-stability and high-reliability power amplifier module and a DC module, which effectively ensures the RF power output of the power supply. High quality electronic components are used to ensure the reliability of the products. Power advantage ● Long time normal operation ● Simple and flexible operation ● High power supply efficiency and low heat generation ●With perfect reflection power protection function RF power 0~100W continuously adjustable / 0~150W   continuously adjustable Signal frequency 13.56MHz   ±0.005% Reflected power ≤100W Power stability ±0.1% RF connector N type connector Machine efficiency ≥75% Harmonic component ≤-50 dBc cooling method Forced air cooling 3.Gas measurement Measuring unit Float flowmeter Gas channel Two channels A channel range 10～100ml B channel range 16～160ml 4.Vacuum system Vacuum measurement Digital vacuum gauge (resistance gauge) Vacuum pump Two-stage rotary vane vacuum pump Motor speed 50 Hz: 1440; 60 Hz: 1720 Pumping rate 50 Hz: 1.1L/s; 60 Hz: 1.3L/s Vacuum range 0.1Pa～10000Pa Ultimate vacuum 0.5Pa Motor noise ≤56dB Pipe interface Gas inlet: KF16; exhaust port KF16. Connecting pipe KF16 vacuum bellows Vacuum valve Solenoid valve Motor Power 400W 5.Others Power supply AC220V 50/60Hz Total power 1000W/1500W Operating temperature -10℃-40℃ Working vacuum ≤40Pa Overall size 600mm×650mm×730mm Total Weight 80kg (including packaging)

Minimum Order: 1 bags