Chemical Equipment & Lab Supplies

High-temperature long-term greases. Benefits for your application: * Higher machine availability and less need for maintenance – at very high operating temperatures up to 260 °C – under the influence of aggressive media and vapours – when used with plastics and sealing materials * Reliable operation in numerous industries and component types – thanks to BARRIERTA base oils, which are made specifically to enable long- term stability – backed by a large number of approvals and references for various applications – four consistency classes to suit different applications Application: Rolling and plain bearings subject to high temperatures. * One of the wellknown strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals. * Typical applications include: -Conveyors (load and turn rollers) -Kiln cart wheel bearings -Calender bearings -Fan bearings -Chain bearings in film stretching stenters

Minimum Order: 1 bags

Long-term grease for rolling and plain bearings STABURAGS NBU 12/300 KP is a rolling and plain bearing grease based on mineral oil and a barium complex soap thickener. It offers good wear protection and good pressure absorption. STABURAGS NBU 12/300 KP is resistant to water and protects reliably against corrosion.

Minimum Order: 1 bags

ethyl 3-(1,3-benzodioxol-5-yl)-2-methyloxirane-2-carboxy , late

Minimum Order: 25

FGB (SHANDONG) BEARING MFG CO., LTD. Which is a Professional R&D, production and sales Spherical Plain Bearing (Joint Bearing) manufacturer in China. The registered trademark is FGB. Sizes ranges from 20mm~320mm, including phosphate and non phosphate products. - Joint (Beef Eye) Bearings - Maintenance Free Radial Spherical Plain Bearings (GETX) - Maintenance Free Inclined Spherical Plain Bearings (GAC..F) - Maintenance Free Spherical Plain Bearings (GX..F) - Tie Rod Ends (Knuckle Heads) - Maintenance Free Tie Rod Ends (Knuckle Heads) 1. Spherical plain bearings : GE, GEH(GEG), GEZ, GE-C, GE-UK, GEEM, GEEW... 2. Rod ends bearings : GK, GF, GAS, GIHNK, GIHOK, GIHRK-DO... 3. Cylinder earring bearing : SK, SF, SIA, SIQ, SIR, SIRN, SIQG, SFEW... Models:GE100ET-2RS GE100UK-2RS GE100EC-2RS ID:100 mm OD: 150 mm Width: 70 / 55 mm Weight: 4.4 kg Brand: FGB GE20UK-2RS / GE20ET-2RS / GE25UK-2RS / GE25ET-2RS / GE30UK-2RS / GE30ET-2RS / GE35UK-2RS / GE35ET-2RS / GE40UK-2RS / GE40ET-2RS / GE45UK-2RS / GE45ET-2RS / GE50UK-2RS / GE50ET-2RS / GE60UK-2RS / GE60ET-2RS / GE70UK-2RS / GE70ET-2RS / GE80UK-2RS / GE80ET-2RS / GE90UK-2RS / GE90ET-2RS / GE100UK-2RS / GE100ET-2RS / GE110UK-2RS / GE110ET-2RS / GE120UK-2RS / GE120ET-2RS / GE140UK-2RS / GE140ET- 2RS / GE160UK-2RS / GE160ET-2RS / GE180UK-2RS / GE180ET-2RS / GE200UK-2RS / GE200ET- 2RS / GE220UK-2RS / GE220ET-2RS / GE240UK-2RS / GE240ET-2RS / GE260UK-2RS / GE260ET- 2RS / GE280UK-2RS / GE280ET-2RS / GE300UK-2RS / GE300ET-2RS / GE320UK-2RS / GE320ET- 2RS / GE340UK-2RS / GE340ET-2RS / GE360UK-2RS / GE360ET-2RS / GE380UK-2RS / GE380ET- 2RS / If you need bearings, please feel free to contact me. Looking forward to your reply. Best wishes, Leo

Minimum Order: 50

FRP chemical storage tank (also known as FRP chemical storage vessel), is manufactured by filament winding process and designed to store high corrosive chemicals like acids, alkalis, alcohols, mineral oils and esters. It can used at high temperature, under high pressure and performs well in preventing seepage, leakage and overflowing. We offer FRP storage tanks in various dimensions and colors to meet your requirements. In addition, FRP chemical storage tanks can also be offered with suitable agitators, ladder, gear box, electric motor and other accessories. FRP chemical storage tank can prevent seepage, leakage and overflowing No. Volume (m3) Size(mm) DN*Height Medium Weight (kg) Temperature (℃) 1 10 Φ2000*3700 Dilute sulfuric acid 750.7 0-60 2 20 Φ2500*4700 Dilute nitric acid 1036.4 0-60 3 30 Φ3000*5000 Sodium silicate 1644.8 0-60 4 45 Φ3500*5200 Ammonium sulfate 2380.9 0-60 5 60 Φ3800*5600 Hydrochloric acid 3117 0-60 6 70 Φ4000*6500 Caustic soda 3725.6 0-60 7 100 Φ4000*8500 Sulfuric acid 5197.2 0-60 8 230 Φ5500*9280 Hot hydrochloric acid 12473.3 0-80 9 500 Φ9000*10512 Hydrochloric acid 24905 0-60

FRP Horizontal tank, also called FRP horizontal vessel, is a device composed by leakage-resistant and anti-corrosion inner layer, firm structural layer, anti- aging outer layer, heads, nozzles, and saddle supports. FRP (Fiberglass Reinforced Plastic), its raw material, is a special kind of plastic which has been reinforced with fiberglass, similar to the way that rebar strengthens concrete. FRP Horizontal tank is a perfect choice when you are in need for storage tank but have a vertical height limitation. By using filament winding method, the material of horizontal FRP tank can be reinforced to adjust its physicochemical ability and meet different requirements. FRP GRP Storage Tank Features Excellent physicochemical performance & durability: FRP Horizontal tank has high strength, good corrosion resistance and thermal insulation Long service life & low maintenance cost: FRP Horizontal tank has smooth inner wall which is non-toxic, odorless and easy to clean Wide range of application: FRP Horizontal tank is widely used in many different fields for storing kinds of liquid Light weight: FRP Horizontal tank is made of fiber reinforce plastic which is lightweight Application Because of the notable advantage of its material, FRP horizontal tank is gradually taking the place of metal tanks in many field. Horizontal FRP tank is supplied for both above and underground applications and has an extensive usage in metallurgic industry, chemical industry, medical treatment industry, light industry, construction industry, textile industry, food industry and electroplating waste water treatment, etc.

Fiberglass reinforced plastic FRP GRP mortar pipe Product Description Fiberglass reinforced plastic FRP GRP mortar pipe adopts resin as basis material, glass fiber as reinforced material and filled with quartz sand. The resin-based body is wound on a rotating mandrel layer by the glass fibers. The quartz sand is evenly laid as a mortar layer at a long distance between the fibers. This unique structure make the pope wall structure reasonable and advanced and the role of the material can be fully exerted. The stiffness is improved without effect the service strength. So it can ensure the stability and reliability of the GRP pipes. The property and advantage of FRP GRP mortar pipe FRP/GRP mortar pipe is also called RPM pipe, as the RPM pipe is accompanied with sand in its structure, compared with the pure FRM pipe, it not only has property of lightweight and high strength, but also possess high stiffness as the buried pipe and low cost. So it is welcomed form its presence. The usage in conveying water or other fluid is more and more. The relative information reported that 160 thousand kilometers long RPM pipe had been installed in America during the middle period of 1990s. in Europe, the length of new laid large and middle diameter RPM pipe for conveying water and sewage accounted for 30%~50% of total installed length.

GRP FRP pipe winding production line is used to produce various size and specifications of FRP mortar pipe and FRP process pipe. FRP Filament Winding Machine’s key elements such as the transducer, servo system and photo electrical encoder are from Siemens, Germany. Showing the English ideograph in menu, operating easily, after the parameters inputted into the computer, it can be finished the relative design of winding linearity. The combined movements of the main axle and the carriage controlled by the computer, conforms the winding rules, the technical parameters and its inner quality have arrived the advanced level in China. The range of diameter can be wound: DN300~DN4000mm The maxi length: 12m The winding angle: 45°~ 90° The total power: 10Kw The tolerance of positioning:＜1mm The maxi width of roving sheet: 150mm The productivity: 500kg/h

We are specialized in the design, manufacture, installation and technology transfer of production guidance of potassium sulphate production equipment. Based on German Mannheim Furnace, by working over its principle and construction, we improve the construction and material of furnace to achieve even heating, complete reaction and low energy consumption. New material and technology is applied to the part of hydrochloride acid absorption, thus absorption efficiency is enhanced and environmental issue is also well resolved. Our company can provide the whole set potassium sulfate Plant, we can provide the service from design,manufacturer to installation and commissioning,the process is Mannheim furnace.One set plant capacity is 10,000 tons per year,how many capacity you need,how many sets of equipment you can got. Technical advantage 1. Some key components of our potassium sulfate fertilizer equipment are made of special materials which are corrosion resistant and durable. Hence, this fertilizer equipment also features long service life. 2. Waste recovery system to recycle hydrochloride acid (HCl) and meet environment requirements 3. Adjusted original HCl absorption system, improved on the quality of the final product. 4. Improved the flue design in the furnace which can make full use of energy and save energy consumption. 5. Used PLC automatic control system to control manufacturing the products, adjust the ratio of feedstock, and saved the labor cost. 6. Adopt gas generator replacing other heating method 7. Stable production and easy operation. 8. Large output& Low coal consumption. 9. Advanced 3D design technology.

Mc Series Dust Free Crushing Module Features 1. Crushing head, by Stainless steel. 2. Crushing capacity 300~2500Kg/Hr，With 60 mesh white granulated sugar crushing data. 3. Continuous crushing temperature monitoring, protection for material and bearing. 4. The heat sensitive materials can be equipped with cooling water jacket. 5. According to the material characteristics, use of alloy tools as option. 6. The system can be running in max capacity of continuous stable production. 7. Uniform discharge, with the weighing system, weighing accuracy <0.1%. 8. Bar code scanning module can be configured to control the feeding. 9. The system is fully closed, in minimum volume of air sucking.

LHS Series High Shear Mixer CHARACTERISTIC This equipment is made of high quality Austenitic stainless steel, all the corners and angels are rounded off using are transition technique; the whole machine has no dead angle, residue, uneven surfaces of protruded screws. PLC is designed to ensure a fully automatic control. All the operations are automatically finished according to the customer’s set parameters; moreover, process parameters can be printed and records of original data are truthfully reliable. LHS Series Compact high shear mixer comply entirely with GMP requirements for medicine production.

FXBW120 Deluxe Fluid-bed Multi-processor FEATURES: Wall-mounted design A.Well-formed appearance, hidden wiring, full of design sense; B.Less space occupation of clean area, maintenance points are mostly in non- clean area; 10bar stuffy ex-proof design A.No explosion release channel, less space occupation for layout; B.High containment and safety level; High-speed bottom spray system A.Jacket design of spray gun, to avoid material contact with dense spray area; b. Enhanced atomization ability, increased spray speed; Top and bottom spray shared one diffusion chamber;

Chinese medicine extraction turnkey project and concentration PFD of traditional Chinese medicine (TCM) Pharmaceutical Equipment Features It consists of extracting tank, tubular heater evaporator; condenser; oil filter oil-water separator; liquid pump, metering tank, storage tank, filter; vacuum pump, power distribution cabinet, etc. There are demisters in extracting tank and evaporator's top steam outlet. It can be equipped with a heating system. It's applied to thermal reflux extraction and concentration, conventional extraction, concentration, water (ethanol) precipitation, percolation, etc. It can work under negative, normal and positive pressure conditions for water extraction, ethanol extraction or solvent extraction. The water extraction temperature can reach 40%, which is suitable for low temperature extraction and concentration. It meets GMP and HACCP requirements. It has great advantages in multi functions, high efficiency; energy saving and a wide range of operations.

Processing and production With an extremely fine closed-cell structure, the foam has minimal resin uptake and problem-free compatibility with metallic facing materials due to the absence of corrosive effects. Cascell ® HF foam is suitable for hand lay-up, prepreg processing and vacuum infusion at temperature up to 130°C and pressure up to 0.3 MPa. Thermoforming and shaping Cascell® HF can be easily thermoformed or CNC machined to meet customers’ requirements, bringing tremendous manufacturing advantages. High precision, pre-shaped and ready-to-use foam cores in complex or simple geometries can also be supplied by the Cascell® Machining Department. Cascell® HF foam core has been specifically designed for antenna application, due to its extremely low dielectric constants and particularly favorable transmission properties. It can also be used as structural core for radomes and mammography plates.

Minimum Order: 1000