Chemical Auxiliaries

Application: Runlube® 8532 is Polysulfides, di-tert-dodecyl, CAS: 68425-15-0 as an extreme pressure additive for lubricants. Runlube® 8532 has high active sulfur content and low odour. Used for cutting oil and forming of ferrous metals such as drilling, broaching, tapping/snapping, grinding, drawing, punching, etc. Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Package: 200kg/drum with pallet

Minimum Order: 1 bags

Application: RZ-W20 is water-based EP additive for full synthetic or semi-synthetic metalworking fluids, it can replace chlorinated paraffin well. And easy for tank-side addition. Benefits: Easy to handle due to liquid High performance Storage:  In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Package:  240kg/drum or 30kg/drum with pallet

Minimum Order: 1 bags

Product Description: Metal deactivator T561 Chemical Name: DMTD derivative Application: T561 is metal deactivator for non-ferrous metals, specially for copper. It has excellent oil solubility, copper corrosion inhibition and oxidation resistance. When used in hydraulic oil, it can significantly reduce the corrosion of ZDDP to copper and solve the problem of hydrolysis stability. When used in internal combustion engine oil, it can greatly improve the oxidation resistance of paraffin base oil. It can also be used in two-stroke gasoline engine oil to improve the anti-swelling performance of the lubricants oil.      Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Package:200kg/drum with pallet

Minimum Order: 1 bags

Product Description: Lubricant additive RZ-SO Application:RZ-SO is an N-acyl sarcosine, a good corrosion inhibitor for lubricating oils, greases physical properties and fuels Fuels 12 - 50 ppm      Benefits: Effective corrosion inhibitor, especially in combination with Amine O Approved by FDA/USA for use in blending lubricants with incidental food contact Will not tarnish copper Contains no diluents Easy to handle liquid Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and ventilated area. Keep container tightly closed and sealed until ready for use. Package:200kg/drum with pallet

Minimum Order: 1 bags

Application &typical recommended dosage: PIB2400 is specially designed for Ashless Dispersants, Gasoline Detergents, 2- stroke Engine Oil, Super compressor Oil, Hydraulic Oil, Gear Oil, Metal Working Liquid, Lubricant Grease, Tail Grease etc, also used for sealant, coating, adhesive. 10%--60% Benefits: Good oxidative stability Good emulsification, compatibility and fluidity High temperature decomposition No sulfur, nitrogen and oxygen Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Package:180kg/drum

Minimum Order: 1 bags

Product Description: AMINE O Application: Industrial lubricants, lubricating grease, and rust-proof liquids,Water-based system metal processing liquid, fuel oil, etc      Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and ventilated area. Keep container tightly closed and sealed until ready for use. Package:  200kg/drum

Minimum Order: 1 bags

Application: Runlube 8232 is a liquid anti-wear agent designed for diverse applications. This versatile solution enhances performance in compressor oils, rolling fluids, gear oils, hydraulic fluids, and metalworking fluids. Boasting oxidation resistance and good thermal stability, Runlube 8232 ensures durability under challenging conditions. In a convenient liquid form, it seamlessly integrates into formulations, offering superior anti-wear properties. Benefits: Excellent Anti-Wear performance Easy to handle due to liquid Good Thermal Stability, Oxidation Resistant Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Package:200kg/drum with pallet

Minimum Order: 1 bags

Good adhesion to metals, chips and other substrates Good sulfur resistance and thermal shock performance Translucent appearance Applications ● Encapsulation for LED lighting components ● Encapsulation for LED backlight components ● Encapsulation for Auto LED lighting components It is a kind of two-part, high temperature cure silicone resin, which is designed for SMD LED encapsulation and suitable for protection of chips and gold wire. The typical features are translucent appearance, good light transmission, sulfur resistance, excellent thermal shock performance, and good adhesion to frame and silver-plated coatings. Specifications Properties 8103 8105 7097S 8232 7098 8225 8136 8228 5004 5005S 8157 7136 Mix ratio 1:10 1:10 1:10 1:10 1:10 1:10 1:10 1:10 1:4 1:4 1:1 1:10 Viscosity 5200 4000 4600 4000 5300 3500 4300 4500 4000 4200 3600 4000 Refractive Index 1.55 1.54 1.55 1.54 1.54 1.52 1.54 1.50 1.54 1.54 1.41 1.41 Cure Condition 100℃*1hr, 150℃*3hr 100℃*1hr, 150℃*3hr 100℃*1hr, 150℃*3hr 100℃*1hr, 150℃*3hr 100℃*1hr, 150℃*3hr 100℃*1hr, 150℃*3hr 100℃*1hr, 150℃*3hr 100℃*1hr, 150℃*3hr 100℃*1hr, 150℃*3hr 100℃*1hr, 150℃*3hr 100℃*1hr, 150℃*3hr 100℃*1hr, 150℃*3hr Shore Hardness D74 D62 D66 D62 D62 D65 D49 D45 A78 A75 A70 A55 Tensile Strength Mpa 12.5 11.0 7.0 11.0 6.5 7.0 3.0 3.0 2.0 2.5 6.5

A variety of epoxy resins are designed to deliver desired protective and performance properties for metal container coatings for use in food and beverage cans, alu-foil takeaway lunchboxes. Chemistry  liner high molecular weight solvent-base Epoxy resin Key Features ● hardness & flexibility ● corrosion resistance ● excellent adhesion ● Vapor barrier ● Impact resistance, ● abrasion resistance Epoxy Resins Specifications Grades Solids ,wt % Viscosity Cps at 25℃ Mn（av） daltons Solvent Available as  requested SEP-3423 40 1000-2500 7000-9000 BCS/XYL/CYC SEP-3425 40 3000-6000 11000-14000 BCS/XYL/BA SEP-3328A 35 3000-5000 16000-19500 BCS/XYL/CYC/MEK SEP-3328B 35 1500-3000 13500-17500 BCS/XYL/CYC/MEK SEP-2575 40 300-1000 7000-1100 BCS/XYL/BA/MEK

Pigment-based textile inkjet printing is a sensible technology demanding for specifically designed polymers & pigments avoiding the nozzles clogging of expensive industrial print-heads. Key Features Enhance fixing ink performance Flexural endurance Highly filterable Avoid nozzle clogging Applications Pigment-based inkjet printing inks for Fabrics & Textiles Water-based Polyurethane Dispersion for inkjet printing inks is utilized to formulate inks suitable for direct printing or transfer onto textiles. Renowned for its good filterability, resistance to dry and wet rub, this product finds pervasive application across the vast realms of apparel, footwear, headwear, and the broader textile industry.

Hard Coatings are advanced protective coatings applied to surfaces to improve their resistance to scratches, abrasion, and wear. These coatings form a hard, durable layer on the substrate, making it resistant to mechanical damage and external elements such as chemicals, UV radiation, and moisture. Key Characteristics of High-Quality Hardcoats For a hardcoat to provide effective protection, it must possess several critical characteristics: Scratch and Abrasion Resistance: The primary function of hardcoats is to protect surfaces from scratches, scuffs, and abrasion during regular use or in harsh environments. Chemical Resistance: Hardcoats provide a barrier against solvents, acids, and other chemicals, ensuring the substrate remains intact and performs well over time. UV and Weather Resistance: Hardcoats designed for outdoor applications should resist UV radiation and weathering to prevent yellowing or degradation when exposed to sunlight.

Barrier coatings for paper are surface coatings applied to the paper surface to provide protection against external elements such as water, oil, gases, and various chemicals. These coatings serve as a barrier, preventing the penetration of these elements into the paper and preserving its integrity. Advantages Improved barrier performance: Barrier coatings provide enhanced protection against moisture, oil, and oxygen, greatly extending the shelf life and freshness of packaged products. Better printability: Barrier coatings have superior printability, enabling more detailed and vibrant printing on paper packaging, thereby improving brand recognition and consumer appeal. Reduced cost: Although the initial development and production costs of barrier coatings are higher than traditional PE lamination, the economies of scale and technological advancements are driving down the costs, making barrier coating for paper a more cost-effective option in the long run.

Chlorinated Polyethylene, often referred to as CPE, is a polymer derived from High- Density Polyethylene (HDPE) through partial chlorination. The introduction of chlorine atoms grants CPE a degree of softness and rubber-like properties. Moreover, it transforms CPE into a polar polymer with polar groups akin to PVC, bolstering compatibility with PVC.

SAN Processing Aid is a super high molecular weight polymer copolymerized from styrene and acrylonitrile,with a molecular weight exceeding 5 million that enhancing PVC's properties,promote PVC plasticization,obviously improve the thermal deformation temperature and surface smoothness of PVC products, and at the same time give PVC products higher surface hardness and rigidity.elevating their overall quality.