Chemical Auxiliaries

CAS：9003-05-08 Purity：90% Molecular formula：(C3H5NO)n EINECS：231-545-4 Appearance：Granule Colour： White Function：Waste Water Treatment, Sewage treatment, Sludge dewatering Anionic polyacrylamide(APAM) series products are water-soluble linear polymers synthesized with high polymerization degree, easily soluble in water, almost insoluble in benzene, ether, lipids, acetone and other general organic solvents. The anionic polyacrylamide produced by Xinhuan Water Treatment can be used as coagulant aid, retention agent, sludge dewatering agent and coagulation precipitant. Because its molecular chain contains a certain number of polar groups, it can adsorb the suspended solid particles in water, make the bridge between particles or make the particles coalesce to form large flocs through charge neutralisation, so it can accelerate the settlement of the particles in the suspension, and it has the effect of accelerating the clarification of the solution and promoting the filtration, etc. Anion Polyacrylamide is mainly used to purify drinking water and domestic sewage, purify industrial sludge and dewatering agent and coagulation and sedimentation agent. It is mainly used to purify drinking water and domestic sewage; purify industrial water and industrial wastewater; purify mine and oilfield re-injection water; purify papermaking, electroplating, electronics, dyeing and finishing, pharmaceuticals, metallurgy, coal washing, tannery and various chemical wastewater. The most suitable type of product should be selected according to the conditions and water quality of the system to be treated. Usage and precautions: 1、Anionic polyacrylamide can not be directly added to the sewage, it must be dissolved in water and treated with its aqueous solution before use. 2、The water used to dissolve the granular polymer should be clean water (such as tap water), not sewage. Room temperature water can be used, usually without heating. When the water temperature is lower than 5 ℃, the dissolution rate is very slow. As the water temperature rises, the dissolution rate will accelerate, but above 40 °C, the polymer degradation rate will accelerate, thus affecting the use effect. Generally speaking, tap water is suitable for preparing polymer solutions. Strong acid, strong alkali, high salt water is not suitable for preparation. 3、Fully dissolved. When dissolving, the water should be stirred sufficiently, and then add the powder slowly and evenly to prevent large flocs and fish eyes from clogging pipes and pumps. 4、Stirring speed is generally 200 rpm, and the time is not less than 60 minutes. Appropriately increase the water temperature 20-30 ℃, can accelerate the dissolution. The maximum temperature of the liquid should be less than 60 ℃. 5、Determine the dosage. The concentration of anionic polyacrylamide solution is recommended to be 0.1%-0.3%, i.e., add 0.1g-0.3g of polymer powder to 1 litre of water. Determine the dosage by experiment before use. If the dosage is too small, it will not work. If the dosage is too large, PAM will not flocculate, but disperse and stabilise. 6、Wash the work site with water frequently to keep it clean. Because of the viscosity of PAM, the surface of PAM scattered in the well is smooth when it meets water, which can prevent the operator from slipping and causing safety accidents.

Minimum Order: 1 bags

Professional manufacturer of flame retardant masterbatch for engineering plastics (such as PA, PP, PE, XPS, ABS, HIPS, etc). High quality, technical support and competitive price are our promise.

Minimum Order: 1 bags

-Product Name: Triphenyl Phosphate (TPP) CAS: 115-86-6 -Application: Halogen-free flame retardant widely used in PVC, PU, epoxy resin, polyester fiber, PC/ABS, PPO/HIPS, PVAC, PS, CA/CAB, VC/VAC, fibre resin, ethylene resin, natural and synthetic rubber, hydraumatic liquor and lubricating oil, cellulose polymer, polyurethane material, paint and varnish. -Specification: Appearance: White Flakes Phosphorus Content: 9.5 Specific Gravity: 1.26g/cm3 Melting Point: 48℃ Acid Value: 0.05% Max -Package and Storage: 25Kgs bag with PE inner or by customer’s requirement. Handle with care, keep air-tight and dry

Minimum Order: 12 metric tons

- Product Name: Halogen-Free Polypropylene (PP) Flame Retardant /MH-HF900 - Advantages MH-HF900 is a kind of halogen-free environment-friendly flame retardant with N and P for polyolefin. Especially for PP products, and can be used in other polyolefin products as well. Test past: --UL94 V0 (0.75mm) --70℃×168hrs water-immersion (UL746C) --GWIT 750℃ --GWFI 960℃ --free from the restrictions of RoHS Directive 2002/95/EC approved by the EU and the Council - Characteristics: Low density, Lower smoke generation, Less mold corrosion - Applications All kinds of fire-resistant Polyolefin plastics, such as warm air blower, bracket of microwave oven, wind wheel, strip and so on. - Specifications Appearance: White Powder Density: 1.8±0.2 g/cm3 Phosphorous Content: 18.0-20.0% Nitrogen Content: 16.0-18.0% Water: 0.5% max Water Solubility: 0.6 g/100ml max Average Particle Size: 10~15 (D50) μm Decomposition Temperature: 250℃ min - Package and Storage Package: 25kgs kraft bag with plastic lining. Handle with care, keep air- tight and dry.

Minimum Order: 1 bags

- Product Name HBCD-Free Extruded Polystyrene (XPS) Flame Retardant Masterbatch/MH-68T - Advantages: HBCD-Free, High heat resistance (240℃min), Good smoke-suppression performance, No corrosion to the screw, Better flow properties, Improve the melt viscosity, strength and sheet bulk density, Provide better mechanical properties. - Application: Fire-resistance for extruded polystyrene (XPS). - Specification: Appearance: Spherical Granules Main Content:50%min Moisture:3000ppm max Density: 1.4±0.2 g/cm3 Recommended: 1.8-2.2% E; 3-4% B2; 4-5% B1 - Package and Storage: 25kgs kraft bag with plastic lining. Keep in a dry and cool place.

Minimum Order: 1 bags

- Product Name: Halogen-Free Flame Retardant for Polyolefin/MH-HF800 - Advantages MH-HF800, is a halogen free environment-friendly flame retardant with N and P, non-APP based FR system. MH-HF800 has higher thermal stability and decomposition temperature. Test past: --UL94 V0 (0.75mm) --70℃×168hrs water-immersion (UL746C) --GWIT 750℃ --GWFI 960℃ --Free from the restrictions of RoHS Directive 2002/95/EC approved by the EU and the Council Besides, wires and cables with MH-HF800B can reach the standard of UL1581 VW-1. - Characteristics: Low density, Lower smoke generation, Less mold corrosion. Polyolefin with MH-HF800 have not the phenomenon of water-sliding surface during extrusion, and sieves can be added during the process. - Applications: PP, PP with GF, TPE, PE, XLPE wires and cables. - Specifications: Appearance: White Powder Density: 1.8±0.2 g/cm3 Phosphorous Content: 20.0-22.0% Nitrogen Content: 23.0-25.0% Water: 0.5% max Water Solubility: 0.5 g/100ml max PH: 3.0-4.5 Average Particle Size: 10 (D50) μm Decomposition Temperature: 270℃ min - Package and Storage 25kgs kraft bag with plastic lining or by customer’s requirements. Handle with care, keep air-tight and dry.

Minimum Order: 1 bags

- Product Name Polypropylene (PP) Flame Retardant Masterbatch/MH-FR4802 - Advantages: Less additive amount, better FR result, low inflammation and few Br content (almost halogen –free in the PP makeup), no need to add ATO, perfect processing performance and no precipitation. - Application: The extrusion and injection of PP for V2 grade of UL94. - Specification: Appearance: White Granule Moisture: 0.3%max Decomposition Temperature: 240℃ min Application: Homo and Copo PP Flame Retardant Grade: V2 (3.0-0.8mm) - Package and Storage: 25kg kraft bag with plastic lining. Handle with care. Keep in dry and cool place.

Minimum Order: 1 bags

- Product Name Bromine Antimony Flame Retardant Masterbatch/MH-FR6800 - Advantages: An environmental carrier free FR masterbatch with high FR efficiency. Low additive, Low dust and abrasion. - Application: PA, PBT, ABS, HIPS, PP, PE - Specification: Appearance: White Granule FR Content: 80% min/85%min/90%min Volatile Matter: 0.5% max Decomposition Temperature: 350℃ min Recommended (V0:1.6mm): PA(30%GF):16-19% PBT(30%GF):12-14% ABS/P , P:18-20% - Package & Storage: 25kgs kraft bag with plastic lining. Handle with care, keep air-tight and dry.

Minimum Order: 1 bags

- Product Name: Halogen-Free Polypropylene (PP) Flame Retardant Masterbatch/MH-FR4801 -Advantage: This product is an intumescent halogen-free flame retardant masterbatch which is based on MH-FR/PP-1. It is specifically applied to varieties of flame retardant polypropylene, and can reach UL94-V0(3.0-1.5mm) 、UL94 5VA and also can pass 850℃ glow-wire test. - Application: Homo and Copo PP - Specification: Appearance: Nature Granule N Content: 13-16% P Content: 14-20% Moisture:0.3%max Density: 1.3-1.5g/cm3 Decomposition Temperature: 270℃ min - Package & Storage: 25kgs kraft bag with plastic lining. Handle with care, keep air-tight and dry.

Minimum Order: 1 bags

- Product Name Polyethylene (PE) Flame Retardant Masterbatch/MH-FR1802 - Advantages: Dependable fire resistance, well dispersity and excellent compatibility with matrix resin. - Application: Polyethylene building safety nets, mine pipes, plates, threading pipes. - Specification: Appearance: White Round Granule Flame Retardant Content: 80%min Moisture: 3000ppm max Application: PE Injection and Extrusion Recommend: 15-25% - Package and Storage: 25kgs kraft bag with plastic lining. Keep in a dry and cool place.

Minimum Order: 1 bags

- Product Name: Red Phosphorus Flame Retardant Masterbatch/MH-FR9800 - Advantage: High phosphorus content, Low added quantity, New carrier, Smaller particle size, Halogen-free, Environment-friendly, Good Stability, Excellent mechnical property, Low migration, Can be in dark color - Application: PA6, PA66, PET, HIPS, TPU, PPO, PP, PE, PC, Rubber - Specification: Appearance: Crimson or Black Granule Red Phosphorus Content: 60%min Density: 1.08-1.25 g/cm3 Moisture: 0.3%max Ignition Point：320℃min Melting Point: 155℃ - Package: 25Kg Kraft bag with plastic lining. Handle with care

Minimum Order: 1 bags

RUBBER ANTIOXIDANT RTENZA 4020 (6PPD) Chemical Name N-(1,3-dimethylbutyl)-N'-phenyl-p- phenylen , ediamine Molecular Formula C18H24N2 Molecular Structure Molecular Weight 268.40 CAS No. 793-24-8 Specification Item Specification Appearance Grayish brown to brown Granular Crystallizing Point,℃ ≥ 45.5 Loss on Drying, % ≤ 0.50 Ash, % ≤ 0.10 Assay, % ≥ 97.0 Properties Gray purple to puce granular, relative density is 0.986-1.00. Soluble in benzene, acetone, ethyl acetate, toluene dichloroethane and slightly soluble in ether, do not dissolve in water. Provides powerful and antioxidant properties with excellent high temperature and flexing resistance to rubber compounds. Application Application range include the use in pneumatic tire components, solid tires, conveyor, hoses, cables, bushings, automotive mounts and general rubber products that are exposed to continuous and intermittent dynamic operating conditions and require protect ozone . Package 25kg kraft paper bag. Storage The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.

Minimum Order: 1 bags

- Product Name: Polyethylene (PE) Film Flame Retardant Masterbatch/MH-1801 - Characteristics: Recombination extrusion of efficient activating treatment and low tempeature plastifying technology with halogen flame Retardant, synergist, additives and LDPE carrier. - Advantages: Environment-Friendly, Simplify the production technology process, Reduce the production cost, Avoid dust, Improve the working environment, Improve the production capacity, Good disperstiy, Better fire-resistant effect, High thermostability, Can process repeatly without influence of mechanical property - Application: Manily used for PE spinning, corrugated pipe, film, etc. - Specification: Appearance: White or Light Yellow Granule Carrier: LDPE Main Content: 50% Min Melting Point: 300℃min Moisture:: 0.2%max Remark: 1. The Melt Index of the LDPE carrier is 1.5g/10min 2.The added quantity can be adjusted according to the thickness of the film. Recommendation is 12-15%. - Package and Storage: 25Kgs kraft bag with double PE inner or by customer’s requirement. Handle with care, keep air-tight and dry

Minimum Order: 1 bags

The application of sodium lignosulphonate , follow as: 1.In construction industry, it can be appied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures 2. In the briquetting procedure, it can be adopted as the adhesives. 3. In the fields of pottery and porcelain and refractory materials, it can be used as embryo reinforcing agents. It can increase the fluldity of the slurry and thus to improve the strength of the embryo 4. In the field of water-coal paste, it can be adopted as the main compound materials. 5. In agriculture, it can be applied as the dispersant agents of pesticides and pelleting adhesives of fertilizers and feedstuffs. 6. In leather industry, it can be used as tanning agent. 7. In dye, it can be used a flling agent and dispersant of vat dye and disperse dye. 8. In the boiler, it can be used a scale remover.

Minimum Order: 1 bags