Chemicals & Plastics - Others

1,4-Butanediol CAS 110-63-4 801532 - EMD CETENG

PMK Manufacturer - CAS 28578-16-7 - ceteng

PEEK Teeth R&D Series has good wear resistance and high mechanical strength. It is mainly used in dentistry in medical field. Specification of Dental Peek Material R&D Series Material Properties Test Method Conditions Units 770G Mechanical Data Tensile Strength ISO 527 B reak,23℃ MPa - Y ield,23℃ MPa 100 Tensile Elogation ISO 527 Break,23℃ % 45 Flexural Strength ISO 178 Break,23℃ MPa - Y ield,23℃ MPa 165 Fleoural Modulus ISO 178 23℃ Gpa 4.1 Compressive Strength ISO 604 23℃ MPa 125 Charpy Impact Strength ISO 179/leA Notched kJm-2 7 ISO 179/IU Unnotched kJm-2 - Izod Impact Strength ISO 180/A Notched kJm-2 7.5 ISO 180/U Unnotched kJm-2 - Mould Shrinkage ISO 294-4 Along flow % 1 Across flow % 1.3 Thermal Data Melting Point ISO 11357 ℃ 343 Glass Tansition (Tg) ISO 11357 Onset ℃ 143 Special Heat Capacity DSC 23℃ kj kg-1℃-1 2.2 Coefficient of Thermal Expansion ISO 11359 Along flow below Tg ppm K-1 45 Along flow above Tg ppm K-1 120 Heat Deflecion Temperature ISO 75A-f 1.8Mpa ℃ 152 Thermal Conductivity ASTM C177 23℃ W m-1K-1 0.29 Flow MeltIndex ISO 1133 380℃,5kg g10min-1 10 Miscellaneous Density ISO 1186 Crystalline gcm-3 1.3 Amorphous gcm-3 1.26 Shore D Hardness ISO 868 23℃ 85 Water Absorption(3.2mm thick Tensile Bar) ISO 62-1 24h,23℃ % 0.07 by immersion Equilib riu m,23℃ % 0.4 Electrical Data Dielectric Strength IEC 60243-1 2mm kV mm-1 23 Comparative Tracking Index IEC 60112 V 150 Dielectric Constant IEC 60250 23℃,1kHz 3.1 23℃,50kHz 3 Loss Tangent IEC 60250 23℃,1MHz 0.004 Volume Resistivity IEC 60093 23℃,1V Ω cm 10 16 275℃ Ω cm 10 9 More details of peek dental material pdf, please visit our website. Polyetheretherketone a suitable material for fixed dental prostheses, if you have needs, please leave us a message. Zhongyan is a leading peek material supplier, providing types of natural peek material. Widely used in the profile, medical, wire & cables, energy development, and transportation.

Minimum Order: 400

The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns) . It can be used as moulding material, spraying material and composite modified pre-dispersion. Types of Grade PF PEEK Pure Resin Fine Powder ZYPEEK Supplier PF Series-770PF PEEK Pure Resin Fine Powder PF Series-550PF PEEK Pure Resin Fine Powder PF Series-330UPF PEEK Pure Resin Fine Powder PF Series-330PF PEEK Pure Resin Fine Powder FAQs of Grade PF PEEK Pure Resin Fine Powder Q Properties of Grade PF PEEK Pure Resin Fine Powder A PEEK polyetheretherketone is a special engineering plastic with excellent properties such as high-temperature resistance, self-lubrication, easy processing, and high mechanical strength, which can be manufactured and processed into various mechanical parts, such as automotive gears, oil screens, gear shifting starters; Aircraft engine parts, automatic washing machine rotors, medical equipment parts, etc. Now the peek powder price is low, if you have needs to buy peek powder coating, please contact us. If you want to know more details of peek thermoplastic polymer, please visit our website.

Minimum Order: 400

Good toughness and impact resistance, it can be disinfected using steam, ethvi alcohol and rays, etc. It has been widely used in the medical, pharmaceutical and food processing industries. Types of Grade G PEEK Pure Resin Pellets ZYPEEK Supplier G Series-770G/770GH PEEK Pure Resin Pellets G Series-550G/550GH PEEK Pure Resin Pellets G Series-330G/330GH PEEK Pure Resin Pellets G Series-551G/551LG PEEK Pure Resin Pellets FAQs of Grade G Peek Resin Pellets Q G Series-770G Peek Pellets A Polyetheretherketon-P (Pure Resin Powder): Can be used as raw material for compounding and injection parts. PEEK-P(Pure Resin Powder) Can be used as raw material for compounding and injection parts. As one of peek resin manufacturers, we will offer kinds of related products for sale, and the peek pellets price is affordable, anything you need, please contact us. More details of peek resin properties, please visit our website. As a peek raw material company, we will do our best to meet all the needs of customers.

Minimum Order: 400

PEEK-GL series, is a glass fiber composite modified peek plastic materials, currently available from 5% -35% of different mass fractions of reinforced materials. Compared with pure resin particles, it has better rigidity, better creep resistance and dimensional stability. Types of Grade GL Glass Filled Fiber Reinforced PEEK ZYPEEK Supplier GL Series-770GL30/770GL30H PEEK Glass Fiber Reinforced GL Series-550GL30/550GL30H PEEK Glass Fiber Reinforced GL Series-330GL30/330GL30H PEEK Glass Fiber Reinforced FAQs of Grade GL Glass Fiber Reinforced PEEK Q Glass Filled Peek Properties A The glass filled peek temperature (Tg) of the EEK is 143°C and the melting point (Tm) is 340°C. The high melting point gives PEEK excellent high- temperature resistance. The fiber reinforcement grade PEEK has a heat deflection temperature of up to 315°C and a long-term continuous use temperature (UL 946B) of up to 260°C. In addition, PEEK maintains a high level of strength and modulus at high temperatures, which means that PEEK has excellent high-temperature mechanical properties. If you want to know more kinds of plastic peek material, please visit our website.

Minimum Order: 400

PEEK-FC series modified by PTFE, graphite and carbon fiber have lower friction coefficient, wear resistance and self-lubrication than pure resin G. Types of Grade FC Super Wear Resistant PEEK ZYPEEK Supplier FC Series-330FC30 PEEK Super Wear Resistant FC Series-770FC30/770FE20/770FE20H PEEK Super Wear Resistant FC Series-FC327 PEEK Super Wear Resistant FAQs of Grade FC Super Wear Resistant PEEK Q Wear Resistance of Grade FC Super Peek Wear Resistance A PEEK (polyetheretherketone) materials are used at extremely high temperatures (approx. 260 degrees), have extremely high stiffness and hardness, and have a unique high tensile and fatigue strength. In addition, its heat resistance and chemical stability are excellent. The natural peek material has excellent dielectric properties until temperatures reach 260 degrees and is resistant to energy rays. PEEK has excellent comprehensive properties, good mechanical properties, high temperature resistance, excellent chemical resistance, making it the most versatile high-grade plastic. Features: The maximum allowable working temperature in the air is very high (can work continuously at 260 degrees, up to 310 degrees in a short time), mechanical strength, high rigidity and hardness, high temperature resistance, excellent chemical resistance and hydrolysis resistance, excellent wear resistance and friction resistance, extremely high creep strength, excellent dimensional stability, excellent ultraviolet resistance, excellent high-energy radiation resistance, inherently low flammability, and less smoke when burning.

Minimum Order: 400

PEEK has outstanding heat aging properties, good flame retardancy, self- extinguishing, hydrolysis resistance, corrosion resistance, stripping resistance, fatigue resistance, radiation resistance, and good electrical insulation, still keeps lower dielectric constant and dielectric loss in high frequency range, and can be used to make special cables for nuclear power, marine and other special fields. Application: High Temperature Engines/ High Temperature Metallurgy/medical / High Temperature Nuclear Power/ Oil Field/ High Temperature Chemical Industry/ High Energy Exploration Popular Peek Raw Material Color PEEK R&D Series GL Series-550GL30/550GL30H PEEK Glass Fiber Reinforced FC Series-330FC30 PEEK Super Wear Resistant Related Peek Applications PEEK Seal Material in Mechanical Mechanical PEEK Valve in Home Appliances Home Appliances PEEK in Electronic & Electrical Electronic & Electrical We have kinds of peek zip ties for sale, if you have needs, please contact us. As one of peek material manufacturers, we will do our best to meet all the needs of customers.

Minimum Order: 400

PEEK has good wear resistance, self-lubrication, non-toxicity, high-temperature resistance, low density, and can decrease noise, reduce energy consumption and prolong service life compared to metals. PEEK can be formed by one-step injection moulding with high production efficiency. Applications: Vacuum Cleaner Impeller/ Air Condition&refrigerator Compressor Exhaust Valve/ Rotor/ Gear/ Bushings/ Separation Claw Popular Peek Composite Material FC Series-330FC30 PEEK Super Wear Resistant PF Series-770PF PEEK Pure Resin Fine Powder P Series-330P PEEK Pure Resin Coarse Powder Related Peek Applications Peek Tube Material Profile Field Compression Molding Peek Energy Development Peek Medical Applications Medical Field As a peek material supplier, we can offer types of peek valve for sale, if you have needs, please contact us.

Minimum Order: 400

Hi Dear, I am Nancy from Hebei Bocao Biotechnology Co., Ltd. We specialize in supplying chemical raw materials. We have seen your purchase information on the website and we have the information of the product you need. If you have any requirements or questions, please contact me and we can help you solve them. Looking forward to your reply. You can contact me on WhatsApp/wechat:+8617824896074. Looking forward to cooperating with you . Best wishes, Nancy

Minimum Order: 25

Hi Dear, I am Nancy from Hebei Bocao Biotechnology Co., Ltd. We specialize in supplying chemical raw materials. We have seen your purchase information on the website and we have the information of the product you need. If you have any requirements or questions, please contact me and we can help you solve them. Looking forward to your reply. You can contact me on WhatsApp/wechat:+8617824896074. Looking forward to cooperating with you . Best wishes, Nancy

Minimum Order: 25

tert-butyl 4-(4-fluoroanilino)piperidine-1-carboxylate

Minimum Order: 25

1-Boc-piperidin-4-one MFCD00151800 Boc-4-pip , eridone N-(tert-Butoxycarbonyl)piperidin-4-one< , br>1-Boc-4-Piperidone 2-Methyl-2-propanyl 4-oxo-1-piperidinecarboxylate N-tert-Boc-4-pipe , ridone tert-Butyl-4-oxopiperidin-1-carboxylat 1-tert-Butoxycarbonyl-4-piperidone 1-Boc-4-pi , peridinone N-(tert-Butoxycarbonyl)-4-piperidone , N-Boc-4-piperidone N-tert Boc-4-piperidone 1-Piperidinecarboxylic acid, 4-oxo-, 1,1-dimethylethyl ester tert-butyl 4-oxopiperidine-1-carboxylate

Minimum Order: 25

中文名：2,4-吡啶二羟酸 CAS:499-80-9 2,4-Pyridinedicarboxylic acid CAS:499-80-9 Overview: Commo , n Name：2,4-Pyridinedicarboxylic acid Other chemical name: RARECHEMALBO0286;PYRIDINE-2,4- DICARBOXYLICACID , ;LUTIDINICACID;2,4-LUTIDINICACID;2,4- PYRIDINED , ICARBOXYLICACChemicalbookID;2,4-Pyridinedicarboxyl , icacidhydrate;2,4- PyridinecarboxylicAcid;2,4-P , yridinedicarboxylicacidhydrate,99+% MF： C7H5NO4 MW：167.12 CAS： 499-80-9 Physical and Chemical Properties： Melting Point： 243-246°C Boiling Point： 295.67°C (roughestimate) Density： 1.5216 (roughestimate) Refractive Index： 1.6280 (estimate) Storage Conditions： Storebelow+30°C. Solubility： 2.49g/l Acidity： Coefficient (pKa) 2.15 (at25°C) Form：Crystalline Powder Color： White to almost white Water： Soluble in water at 20°C 4.5 g/L. Features and uses: 2,4-Pyridinedicarboxylic acid can be used as organic synthesis intermediate and pharmaceutical intermediate, mainly used in laboratory research and development process and chemical production process. Storage Information： Store in a cool and ventilated warehouse. Keep away from fire and heat source. Keep out of direct sunlight. Keep the container sealed. It should be stored separately from oxidants and edible chemicals, and avoid mixed storage. Fire fighting equipment of corresponding variety and quantity shall be provided. The storage area shall be equipped with leakage emergency treatment equipment and suitable storage materials. Package: 25kg/bucket

Minimum Order: 10 long tons