Other Chemicals

Product Description Alcohol Ether Chemical Tripropylene Glycol Butyl Ether Cas No 55934-93-5 TPnB is the slowest evaporating glycol ether in the yida product line, and is a high boiling, colorless solvent with low viscosity and practically no odor. Due to its length and hydrophobic structure, this product has a high organic solubility, low water solubility, and a high boiling point. Name: tripropylene glycol butyl ether Another Name: [2-(2-butoxymethylethoxy)methylethoxy]-pr , opano; [2-(2-butoxymethylethoxy)methylethoxy]-P , ropanol； Tri(propyleneglycol)butylether,mixtu , reo; Tripropyleneglycolmonobutylether; Tripr , opyleneglycoln-butylether; ARCOSOLV (R) TPNB; TPNB Specifications: Product Name TPNB tripropylene glycol monoproyl ether Test Method Buyer Product Batch No. 　 Quantity Detection Results No. Items Specifications 1 Appearance Clear,Colorless solution 2 Content ≥99 3 Water Content wt.% ≤0.10 4 Acidity wt.% (Calculated as Acetic Acid) ≤0.01 5 Density -- 6 Color(Pt-Co) -- Concustion Pass Analyst Test Date 2017/5/10 Analysis Director Physical and Chemical Properties Physical State :Liquid. Color :Colorless to yellow Odor :Mild Odor Threshold : No test data available Flash Point - Closed Cup :126 °C (259 °F) ASTMD3278 Flammability (solid, gas) :No Flammable Limits In Air Lower :No test data available Upper :No test data available Autoignition Temperature :202 °C (396 °F) Literature Vapor Pressure :0.002 mmHg @ 20 °C Literature Boiling Point (760 mmHg) :274 °C (525 °F) Literature . Vapor Density (air = 1) :>6 Estimated. Specific Gravity (H2O = 1) :0.930 25 °C/25 °C ASTM D891 Freezing Point : < -75 °C (< -103 °F) Estimated. Melting Point :Not applicable Solubility in water (by weight) :4.5 % @ 25 °C Literature Ph : No test data available Decomposition Temperature:No test data available Partition coefficient, noctanol/water (log Pow):No test data available Evaporation Rate (Butyl Acetate = 1) :No test data available Dynamic Viscosity :7.0 mPa.s @ 25 °C ASTM D445 Applications: Coatings Nitro paint, Varnish and Enamel. Ink It is ideal for use in specialty printing inks. Other Applications Dye, textile assistant, anti-freeze and agriculture chemicals Q: Why choose us? 1) We are manufacturer of ether and acetate products, and we can control quality by ourselves. 2) Different techinical specification available according to client's requirement. 3) Quality and finish time can be guaranteed. 4) All the products will be inspected carefully before delivery by our QC and QA. 5) We assure you the best service at all times. 6) We promise you the safety delivery . TPNB Tripropylene Glycol Monobutyl Ether Coating Leatherwear Auxiliary Solvent 0

Product Description Diatrizoic Acid Xi'an Libang Pharmaceutical Co.,Ltd has developed Diatrizoic Acid API since 2003, as its biggest manufacturer in China. The typical quality attributes for Diatrizoic Acid as follow: Chemical name: Benzoic acid, 3,5-bis(acetylamino)-2,4,6-triiodo-.3,5- Diacet , amido-2,4,6-triiodobenzoic acid Solubility: Very slightly soluble in water; soluble in ammonia solution or sodium hydroxide solution. Fuction: Amidotrizoic Acid Dihydate is used for producing the radiopaque contrast agent for intravascular use named as Diatrizoate Meglumine and Diatrizoate Sodium Injection or Diatrizoate Meglumine Injection. Advantage: Control the Free aromatic amine limit within a lower acceptance criteria. TEST SPECIFICATION RESULT Appearance White, odorless powder Conforms Identification (1) It responds to the Thin-Layer Chromatographic Identification Test Conforms (2) Positive reaction Conforms Water 4.5%~7.0% 5.6% Residue on ignition NMT0.1% 0.06% Iodine and iodide NMT 0.02% of iodide Conforms Heavy metals NMT 0.002% Conforms Free aromatic amine NMT 0.05% 0.008% Ethyl alcohol NMT 0.5% Not detected Acetic acid NMT 0.5% Not detected Bacterial endotoxins NMT 1.5 EU/g ＜1.5 EU/g Microbial Limit Total aerobic microbial count: ＜1000 cfu/g Conforms Total yeast and molds count: ＜100 cfu/g Conforms Assay 98.0%～102.0%(Calculated on the anhydrous basis) 99.2%

It is a derivative of uridine that is used as a therapeutic agent for treating allergy, cancer, infection and autoimmune disease. Purity≥99% AppearanceWhite to Off-white Solid Synonyms1-(2-Deoxy-β-D-erythro-pentofura , nosyl)uracil; Deoxyribose Uracil; Deoxyuridine; NSC 23615; Uracil Deoxyriboside; 1-((2R,4S,5R)-4-Hydroxy-5- (hydroxymethyl)tetra , hydrofuran-2-yl)pyrimidine-2,4(1H,3H)-dione; 1-(2-Deoxy- beta-D-ribofuranosyl)uracil IUPA , C Name1-[(2R,4S,5R)-4-hydroxy-5-(hydroxymethyl)oxola , n-2-yl]pyrimidine-2,4- dione SolubilitySolub , le in DMSO (Slightly), Methanol (Slightly, Heated), Water (Slightly) StorageStore at 2-8°C

50% Water Decolorant Decoloring Agent Decolor Chemical Water Treatment Chemicals Brief Description Water Decoloring Agent is used for the decolorization of textile, printing and dyeing, ink, leather, rubber, coking, papermaking, pharmaceutical and other wastewater. The general decolorizing agent is polyaluminum chloride, and other metal salts with cations, and there are also high-efficiency decolorizing agents. The decolorizer is an organic polymer with a strong positive charge. The dosage is small and the decolorization efficiency is high. It can remove colors that cannot be removed by polyaluminum chloride, and make the final water quality reach an ideal state. Specifications Procuct name Water Decoloring Agent Item CW-08/CW-05 Appearance colorless or light-color sticky liquid Dynamic viscosity(cps,20°C) 50-500 HS 391190/391400 PH (30% water solution) 2.5-5.0 Application Fields Chemical Water Treatment Decoloring Agent Colorless 215-684-8 0 1. Mainly used for waste water treatment in textile, printing, dyeing, paper- making ,mining,link butcherl andfill leachate and so on. 2. Be used for color removal chemical for high-colority waste water from dyestuffs . 3. Be used as retention agent used in the paper mills. 4. Very stable, will not change to a layered when temperature change. Advantages 1. Stronger decolorization and removal of COD,BOD 2. Faster sedimentation, better flocculation 3. Environmental protection 4. Free samples can be sent for u to test Application Method 1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to get clear water. 2. The PH in 6-10 is more appropriate to get better result. 3. polyaluminum chloride, but not mixed together. In this way, the treatment cost can be lower. Whether polyaluminum chloride used earlier or later depends on the flocculation test and the treatment process. One-Stop Service Chemical Water Treatment Decoloring Agent Colorless 215-684-8 1 Package and Storage Chemical Water Treatment Decoloring Agent Colorless 215-684-8 2 1.It is harmless, non-flammable and non-explosive, it can not be placed in the sun. 2.It is packed in plastic drums with each containing 30kg, 50kg, 250kg ,1000kg, 1250kg IBC tank or others according to your requirements. 3.This product will appear layer after a long-term storage, but the effect will not be affected with stir. Storage temperature: 5-30°C. Why Choose Us Chemical Water Treatment Decoloring Agent Colorless 215-684-8 3 Yixing Cleanwater Chemicals Co., Ltd. has been in chemical business since 1985.We specialize in providing chemicals and service for treatment of industrial waste water and urban sewage. Main product include Water decoloring agent, PAC, PAM, pdadmac, polyamine, flocculant and coagulant,etc. ‘CLEAN WATER CLEAN WORLD’ is our company's goal. ‘Rapid response, Immediate action, Excellent quality, Credit first’ is our company's tenet. We believe that we can meet the requirements of domestic and foreign customers with high quality products, reasonable price, timely delivery and perfect service. FAQ 1.Q: How to use decoloring agent? A: The best method is to use it together with PAC+PAM, which has the lowest processing cost. The detailed guidance is available,welcome to contact us. 2.Q: Do you provide after-sales service? A: We adhere to the principle of providing customers with comprehensive services from inquiries to after-sales. No matter what questions you have in the process of use, you can contact our sales representatives to serve you. 3.Q: How can I get sample for lab test? A: We could provide some free samples to you. Please provide your courier account (Fedex, DHL, etc) for sample arrangement. 4.Q: We have more questions, how to contact you? A: Welcome to contact us on alibaba.com, we'll reply as soon as possible.

CALL/WATSAPP:+918800595971 for professional BLACK MONEY CLEANING( BLACK/WHITE/GREEN-DOLLARS,EUROS,POUNDS) acquired through UNITED NATIONS,LOTTERY,LOANS AND INVESTMENT FUNDS with black dollars cleaning machine, SSD automatic Solution, Activation powder and mercury powder. We are the major SSD solution suppliers in INDIA and worldwide for black dollar cleaning. We have in stock, 100% concentrated SSD solution for sale and our SSD solution price is affordable. Our SSD solution chemical is sold with a detailed user manual guide and DVD PLATE for comprehensive instruction on how to clean without technicians help. Black Money Cleaning Machine for sale and RENT for HUGE AMOUNT cleaning. DR.OMAR KHALID +918800595971 benyssdchemicals77@gmai , l.com 44, Mahavir Nagar Dwarka Sector 62 New Delhi - 110001

Full Name: Sulfur Properties: Bright yellow powder Usage: It is used widely in rubber tire, pigments, paper making, pesticide and bactericide, food industry and semiconductor industry, etc. Storage: In a dry, cool and well-ventilated place. Protection from sunshine, rain, moisture, heat/sparks/open flames/ hot surfaces, etc. No. Particulars National standard specs Analysis result 1 S 99.95%min 99.98% 2 Organic 0.03%max 0.01% 3 Ash 0.03%max 0.008% 4 Acidity 0.003%max 0.002% 5 As 0.001%max 0.00005% 6 Moisture 2.0% Max 0.03% 7 Fe 0.003%max 0.0004%

Minimum Order: 20 square metres

We have Red Mercury and Silver mercury for sale. Molecular formula: Sb2O7Hg2. Density: 20/20, 22/22, 24/24, 27/27. Purity: 99.99%. Colour: Cherry red. Sample orders available. Order Red Mercury and Silver mercury Chemical production from Multi Brands Reproduction Laboratory Inc. we supply at both whole sale and retail all over the world with rapid and secured delivery. Where to buy red mercury. How much does red mercury cost? Multi Brands Reproduction Laboratory Inc. Paris 2 Place de la Porte Maillot, 75000, Paris, France Tel: +33753660288 WhatsApp Webmail: info@multi-laboratory.com Website: https://multi-laboratory.com/

Minimum Order: 1 bags

NT CAT PC-5 CAS No.: 3030-47-5 Pentamethyldiethylenetriamine Overview: , Common Name: Pentamethyldiethylenetriamine Other Chemical Names: PMDETA;PMDTA;PENTAMETHYLDIETHYLENETRIAMINE;N,N , ,N',N'',N''- PENTAMETHYLDIE , THYLENETRIAMINE;N,N,N',N',N''- , PENTAMETHYLDIETHYLENETRIAMINE;1,Chemicalbook1,4,7, , 7-pentamethyl- diethylenetriamin;2,5,8-trimethy , l-2,5,8-triazanonane;2-Ethanediamine,N-[2- (dim , ethylamino)ethyl]-N,N’,N’-trimethyl-1 MF： , C9H23N3 MW：173.3 CAS：3030-47-5 Typica , l Properties Appearance Physical state: Form: liquid liquid (20 °C) Odour: Amine odor Flash point: boiling point: 72 °C closed cup 199°C Auto-ignition temperature 155°C Vapour pressure 0.0399(20°C) Vapour density 21.89 Density ca. 0.85 g/cm3 Viscosity 3(25°C) Features and uses: NT CAT PC-5 is a strong PU foaming catalyst, major catalyzing property in foaming, also used for balancing the whole foaming and gel reaction. It is widely used in all kinds of rigid polyurethanefoam, including polyisocyanurate rigid foams. NT CAT PC-5 could be used for polyurethane plastic formula, also can be used with other catalysts. Storage Information: Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. The optimum storage temperature is between10 °C and 30 °C. Lower and higher storage temperatures are not preferable and should be avoided. Package: 170KG/Steel Drum (Polycat 5, Niax C-5, Jeffcat PMDETA, Lupragen N301, Tegoamin PMDETA, PC CAT PMDETA, Toyocat DT)

Minimum Order: 100

ATP's Medical Equipment and Microbial-resistance cable Jacket" passed ISO10993 "bio-compatibility" test (authoritative verification report attached ); Pass a series of comprehensive tests: alcohol resistance, microbial resistance, acid and alkali resistance, hydrolysis resistance (85℃&85%RH，1000Hrs) test;" V0 grade material passed biological compatibility certification by Suzhou University; excellent resistance to hydrolysis, alcohol, chemical solvent, and low temperature; soft and smooth touch, matte surface; extrusion speed≥60M/min. The polymer production for Wire for Medical Instruments markets. Technical Data of Medical Equipment & Microbial-resistance Cable Jacket TPU Technical Data Sheet Model Model Material Properties Test Standard Test Condition Unit 1182F- EMS-1219S 1185D-ENB-1414S General Characteristics Material Category - - - Appearance(Light/Semi-matte/Frosted) - - Extrusion/Injection - - - Physical Characteristics Hardness ISO 48 15S Shore A 84 85 Proportion ISO 1183 - g/cm³ 1.083 1.185 Melt Index ISO 1133-1:2011 190℃/2.16kg g/10min 4.6 9.6 Brittle Temperature ISO 812 - ℃ Mechanical Properties Elongation ISO37:2017 200mm/min % 465 492 Tensile Strength ISO37:2017 200mm/min Mpa 29.5 26.1 Tearing Strength ISO34-1:2015 500mm/min KN/m Hot Air Aging Elongation Retention Rate ISO37:2017 - % Tensile Strength Retention Rate ISO37:2017 - % Electrical Performance Volume Resistivity ASTM D257 - Ohm-cm Permittivity ASTM D150 - - Combustion Performance Vertical Burning Test UL 94 3.0/6.0mm - Oxygen Index ASTM D2863 - % Feature As a professional polymer compound manufacturer, we provide tpe elastomer, atp material, antimicrobial tpu, tpu cable jacket and etc. For more information, please feel free to contact us!

Minimum Order: 500

ATP's TPE plastic thermoplastic elastomer series 1. Authoritative certification: passed ISO10993 "bio-compatibility" test; 2. Safety and reliability: Pass a series of comprehensive tests: alcohol resistance, microbial resistance, acid and alkali resistance, hydrolysis resistance (85℃&85%RH，1000Hrs) test; 3. Gentle touch: Compared with TPU cable sheath, TPEs cable sheath presents a softer touch; 4. High-cost performance ratio: low density (≤0.95), high processing efficiency, the best solution for discarded medical cable sheath. Technical Data of Medical Equipment Cable Jacket TPEs Technical Data Sheet Model Material Properties Test Standard Test Condition Unit 2560F- ESU-2514S General Characteristics Material Category - - - Appearance(Light/Semi-matte/Frosted) - - - Extrusion/Injection - - - Physical Characteristics Hardness ISO 48 15S Shore A 55 Proportion ISO 1183 - g/cm³ 0.939 Melt Index ISO 1133-1:2011 190℃/2.16kg g/10min 0.7 Brittle Temperature ISO 812 - ℃ Mechanical Properties Elongation ISO37:2017 200mm/min % 424 Tensile Strength ISO37:2017 200mm/min Mpa 5.24 Tearing Strength ISO34-1:2015 500mm/min KN/m Hot Air Aging Elongation Retention Rate ISO37:2017 - % Tensile Strength Retention Rate ISO37:2017 - % Electrical Performance Volume Resistivity ASTM D257 - Ohm-cm Permittivity ASTM D150 - - Combustion Performance Vertical Burning Test UL 94 3.0/6.0mm - Oxygen Index ASTM D2863 - % Feature As a professional polymer compound manufacturer, we provide tpe elastomer, atp material, tpe plastic material, tpe cable jacket etc. For tpe plastic meaning or more information, please feel free to contact us!

Minimum Order: 500

UEN-M Series Matte TPU Applied Fields: High-end market TPU wire & cable products with fine, homogeneous matte surface effect. Characteristics: Fine, homogeneous matte surface effect; slim and soft-touch rubber feel. Applicable fields: 1. All kinds of cables and optical cables with matte and matte characteristics are required for the outer quilt; 2. The outer quilt of various cables that can pass the CSA FT-2 horizontal combustion test. Product features: 1. Even, delicate, soft, and smooth matte and matte appearance; 2. Excellent mechanical properties, elasticity and wear resistance; 3. Processing characteristics: excellent processing efficiency and processing performance, the production efficiency of 60-100 meters per minute can be achieved by using the same PVC screw machine, and there is very little deterioration such as drooling, particles, bulging, and pitting during processing. Product commonality: 1. Environmental performance: fully meet the requirements of internationally accepted environmental protection directives such as RoHS (REV.2.0), REACH regulations, SVHC substances, and GP; 2.Environmental resistance characteristics: According to the application requirements of customers, anti-UV, anti-static, and other characteristics can be added without changing their basic performance. 3.Technical Data of Matte Surface TPU 4.Technical Data Sheet 5.Model 6. 7.Material Properties 8.Test Standard 9.Test Condition 10.Unit 11.1185F-EMS-1546T 12.General Characteristics 13.Material Category 14.- 15.- 16.- 17. 18.Appearance(Light/Semi-matte/Frosted) 19.- 20.- 21.- 22. 23.Extrusion/Injection 24.- 25.- 26.- 27. 28.Physical Characteristics 29.Hardness 30.ISO 48 31.15S 32.Shore A 33.83 34.Proportion 35.ISO 1183 36.- 37.g/cm³ 38.1.079 39.Melt Index 40.ISO 1133-1:2011 41.190℃/2.16kg 42.g/10min 43.5.1 44.Brittle Temperature 45.ISO 812 46.- 47.℃ 48. 49.Mechanical Properties 50.Elongation 51.ISO37:2017 52.200mm/min 53.% 54.489 55.Tensile Strength 56.ISO37:2017 57.200mm/min 58.Mpa 59.26.1 60.Tearing Strength 61.ISO34-1:2015 62.500mm/min 63.KN/m 64. 65.Hot Air Aging 66.Elongation Retention Rate 67.ISO37:2017 68.- 69.% 70. 71.Tensile Strength Retention Rate 72.ISO37:2017 73.- 74.% 75. 76.Electrical Performance 77.Volume Resistivity 78.ASTM D257 79.- 80.Ohm-cm 81. 82.Permittivity 83.ASTM D150 84.- 85.- 86. 87.Combustion Performance 88.Vertical Burning Test 89.UL 94 90.3.0/6.0mm 91.- 92. 93.Oxygen Index 94.ASTM D2863 95.- 96.% 97. 98.Feature 99. As a professional polymer compound manufacturer, we provide tpe elastomer, tpe elastomero termoplastico, tpu thermoplastic polyurethane resin, thermoplastic polyurethane resin, tpu resin and etc. For more information, please feel free to contact us!

Minimum Order: 500

ATP starts the LSZH compound ( LSOH material ) research and development for various applications such Rail Transit, Architecture&Home Decoration, data communication, based on the CRP (European Construction Products Regulation) requirement from 2017; ATP's low smoke zero halogen materials support the wire and cables to pass the CPR EN50575 grade (B2ca, Cca, Dca, Eca) burning test; The LSZH jacket material has a higher flame retardant grade and drop test grade, and still has excellent processing characteristics and quality under the condition of high flame retardant performance; ATP's High Voltage LSOH LSZH Cable Jacket Material Solution, Fully meets the low friction LSZH requirements of temperature resistance, flame retardant, and other indicators of high-voltage wire harness passing ISO 6722 125 ℃ and ISO6722 125℃ tests. Low Smoke Zero Halogen Material By Processing ATP's low smoke zero halogen material with good process-ability, fully meet the requirements of high-speed extruding, line diameter rounded and stable, less salivation(less die stock), good color stability, and higher yield rate. Low Smoke Zero Halogen Material by Characteristics LSZH compound is a kind of cable sheathing material that has been widely used in the world. The urgent need of cable manufacturers is to provide better scale processing and better prices while meeting the basic safety performance, flame retardant performance, mechanical strength, and reliability. ATP's Defender-N™ LSZH jacket material product is a cost-effective low friction LSZH material developed for this customer's needs. Low Smoke Zero Halogen Material By Crosslinking Modes After the low-smoke zero halogen flame retardant compound polyolefin cable material is cross-linked, it can improve the mechanical properties, heat resistance, environmental stress cracking resistance, and other properties of the material, broaden the application scope of the material, and improve the reliability and life of the material according to low smoke zero halogen regulations. As one of the most professional plastic compounding companies, we provide lszh lsoh, low smoke zero halogen lszh, low smoke zero halogen heat shrink, thermoplastic compound, tpe elastomero termoplastico and etc. For what is lszh or more information, please feel free to contact us!

Minimum Order: 500

The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics: 1. Improved Low-temperature Resistance In the application of cable insulant, the modification TPO of ATP can not only meet the requirement of electric performance from the insulant but also display a more broad temperature resistant character——displaying excellent mechanical properties and aging properties at the test temperature of -50℃—+125℃. So, this is the optimized insulant for wires and cables which have special requirements for low-temperature resistance. 2. Improved shrinkage resistance The jacket made up of TPO wire and cable insulant from ATP keeps its section surface smooth and orderly with little retraction rate after immersing in solder machine （350℃/2”）. In the application of high-temperature-resistant cables (temperature≤125℃) such as charging vehicle cables (EV Cable), equipment connection cables, etc., the jacket made up of TPO wire and cable insulant from ATP takes the place of XLPE materials to meet the requirements of insulant high-temperature aging and shrinkage for nominal cables. And this can simplify the processing procedures by a large margin and improve the processing efficiency and yield. Application: TPO has the characteristics of small specific gravity, good impact strength, and low-temperature brittleness, and is suitable for applications in the cable industry. Technical Data of Low Temperature-resistance TPO Technical Data Sheet Model Material Properties Test Standard Test Condition Unit 2895F- ESS-1008S General Characteristics Material Category - - - Appearance(Light/Semi-matte/Frosted) - - - Extrusion/Injection - - - Physical Characteristics Hardness ISO 48 15S Shore A 97 Proportion ISO 1183 - g/cm³ 0.93 Melt Index ISO 1133-1:2011 190℃/2.16kg g/10min 1.7 Brittle Temperature ISO 812 - ℃ Mechanical Properties Elongation ISO37:2017 200mm/min % 590 Tensile Strength ISO37:2017 200mm/min Mpa 33.367 Tearing Strength ISO34-1:2015 500mm/min KN/m Hot Air Aging Elongation Retention Rate ISO37:2017 - % Tensile Strength Retention Rate ISO37:2017 - % Electrical Performance Volume Resistivity ASTM D257 - Ohm-cm Permittivity ASTM D150 - - Combustion Performance Vertical Burning Test UL 94 3.0/6.0mm - Oxygen Index ASTM D2863 - % Feature As one of the most professional polymer compounding companies, we provide polymer compound, tpo polyolefin, polymer thermoplastic, tpe elastomero termoplastico and etc. For more information, please feel free to contact us!

Minimum Order: 500

By cooperating with the injection grade TPU with molding ability and excellent sealing characteristics, entire product solution could be formed fast. Technical Data of Injection Molding TPU Technical Data Sheet Model Material Properties Test Standard Test Condition Unit 1182B- RSS-1531S 1182B-RSS-1531S General Characteristics Material Category - - - Appearance(Light/Semi-matte/Frosted) - - - Extrusion/Injection - - - Mechanical Properties Elongation ISO37:2017 200mm/min % 518 462 Tensile Strength ISO37:2017 200mm/min Mpa 18.5 36.951 Tearing Strength ISO34-1:2015 500mm/min KN/m Hot Air Aging Elongation Retention Rate ISO37:2017 - % Tensile Strength Retention Rate ISO37:2017 - % Electrical Performance Volume Resistivity ASTM D257 - Ohm-cm Permittivity ASTM D150 - - Combustion Performance Vertical Burning Test UL 94 3.0/6.0mm - Oxygen Index ASTM D2863 - % Feature As a thermoplastic elastomer company, we provide atp polymer, tpu material injection molding, thermoplastic polyurethane injection molding, welding tpu, tpu moulding, tpu injection, tpu overmolding, polymer compound, tpe elastomero termoplastico and etc. For more information about tpu injection molding temperature and tpu injection molding process, please feel free to contact us!

Minimum Order: 500