Auto Parts & Tools

√ Cast Iron Brake Caliper √ Heavy Duty √ Marine Trailer Mechanical Disc Brake √ 1700 KG (15”/16” WHEEL) √ Boat Trailer Brakes √ 2000 KG (13”/14” WHEEL) √ Mechanical Disc Caliper √ Marine Trailer Brake Caliper √ Trailer Brake Pads √ Centre Pull The trailer mechanical disc brake calipers have two configurations, forwarder pull and centre pull. The forward pull is commonly used on beam/spring axle, and he centre pull is used on independent/torsion axle. The difference between these two calipers is the lever. The mechanical centre pull brake is old version, it’s heavy duty trailer caliper. We are Chinese mechanical brake caliper exporter, there are DIY trailer mechanical disc brake kits that can be provided. Every kit contains 2 pcs of trailer brake discs, 2 pcs of brake calipers with pads and bearings etc. This caliper is made of cast iron, stainless steel is available. Other specifications are same as forward pull caliper. Features l Requirement of disc hubs and rotors: Thicknesses from 12 mm to 15 mm. l Galvanized coated and stainless steel accessories can prevent the corrosion of seawater. l Mounting bolts and pads are included. Quick and easy installation. l Mechanical Disc Brakes are more affordable than hydraulic disc brakes. l This mechanical disc brake calipers exchange with AL-KO centre pull calipers. Specifications Ø Axle Capability: 1700 kg (15”/16” wheel), 2000 kg (13”/14” wheel) Ø Mounting Bolts: 12 mm Ø Bolt Spacings: 88.9 mm (3.5”) Ø Max cable pull input (kg) per brake: 300 kg Product Composition ² Non-asbestos semi-metal brake pads x 2 ² Galvanized Cast Iron Brake Caliper Body x 1 ² Slide Pin Kit x 1 ² Slide Dust Boot x 2 ² Centre Pull Lever x 1

Minimum Order: 400

√ off road trailer axle √ Manual Adjustment √ With parking √ trailer brake kit √ 12 inch electric brake √ trailer electric brake system √ 6000 lbs trailer axle √ trailer brake kits ATM (Aggregate Trailer Mass) GTM (Gross Trailer Mass) In Australia, all trailers with ATM or GTM over 2000kg must have a Breakaway Brake setup that will immediately apply the trailer brakes in the event of the trailer becoming disconnected from the towing vehicle. Off-road electric drum brake is both with mechanical parking and with off road design. The plastic core in the magnet will reduce the vibration and the high temperature so that this brake assembly could ensure you a safe drive when you facing the extremely rough road. Meanwhile the trailer axle repair will be easy. Features l Electric off road brakes assembly will work with or without brake actuator. l 12 inch x 2 inch trailer off road electric backing plate is electrophoretic- coated. l Needs only an electric brake controller to work. l Periodic manual adjustment required. l 12 inch trailer brake can work with most trailer axles 6000 lbs including Dexter, Hayes and many others. With the off road design, trailers can go through the rough road freely. Specifications Ø Dimension: 12 inch x 2inch Ø Axle Capability: 6000 lbs Axle Ø Mounting Flange Bolt Pattern: 5 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition Ø 12” x 2" Brake Shoe Set x 1 Ø E-coat Backing Plate x 1 Ø Off-Road Magnet x 1 Ø Magnet Lever x 1 Ø Handbrake x 1 Ø Springs x 2 Ø Adjuster x 1 Ø Mechanical park brake lever

Minimum Order: 300

√ Mechanical Drum Brake √ 9 X 1.75 inch Drum √ Trailer Mechanical Brakes √ 1200 KG √ Mechanical Brake Set √ 1450 KG √ with Handbrake √ Trailer Mechanical Backing Plate 9" mechanical trailer drum brake kit is suitable for caravans, camper trailers, boat trailers, horse floats and box trailers. The 9” mechanical brake assembly with lever brake has two identical shoes, there is no primary shoe or secondary shoe as in electrical brake assemblies. The recommended maximum load of 9” x 1.75” trailer mechanical brakes for 15”-16” wheel is 1200 kg, and 1450 kg for the axles of 13” and 14” wheel. It is worth noting that the matched drums have 5 or 6 bolt patterns. Most of 9 inch trailer mechanical backing plate wholesaler in Australia and New Zealand market. Features l Mechanical brakes are cheaper than hydraulic brakes. l Requires only a cable and levers. (sold separately) - no brake cylinder or hydraulic lines necessary. l E-coated backing plates resist wear and corrosion. l Fully Assembled; Quick and easy installation. l The 9" mechanical drum brake exchange with most axle brands including AL-KO, Bawa, and many others. Specifications Ø Dimension: 9 inch x 1 3/4 inch Ø Axle Capability: 1200 kg Axle (15”/ 16” Wheel), 1450 kg Axle (13” / 14” Wheel) Ø Mounting Flange Bolt Pattern: 4 Bolt Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 9” x 1 3/4" Brake Shoe Set x 1 ² 9” E-Coated Back Plate x 1 ² Brake Adjuster x 1 ² Brake cable x 1 ² Springs x 2

Minimum Order: 300

√ Hydraulic Drum Brakes √ 10 x 2.25 inch Drum √ Manual Adjustment √ 3500 lbs √ Hydraulic Trailer Brake √ Uni-Servo √ Marine Trailer Brakes √ Trailer Brake Assembly 10 inch hydraulic drum brakes are rated 3.5k lbs per pair. 10” x 2.25” trailer hydraulic backing plate is fully assembled for a quick and easy installation. The hydraulic drum brakes for trailers are ready to bolt to the 4-hole mounting flange. These hydraulic trailer brake kit interchanges with most major brands of axles, without modifying the axle or mounting flange, such as Demco, Atwood, Axletek, Lippert and Dexter. Please note that the hydraulic brake assembly will deliver 20 percent braking when traveling in reverse. Features l Hydraulic drum brake assemblies are designed for use with a surge-type trailer brake actuator (sold separately). l Fully Assembled; Quick and easy installation. l E-coated backing plates resist wear and corrosion. l Periodic manual adjustment required. l These 10" hydraulic uni-servo trailer brakes exchange with most axle brands including Dexter, AL-KO, etrailer, Demco and many others. Specifications Ø Dimension: 10 inch x 2 1/4 inch Ø Axle Capability: 3500 lbs Axle (13", 14”, 15" Wheel) Ø Mounting Flange Bolt Pattern: 4 bolt Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 10” x 2 1/4" Bonded Uni-Servo Brake Shoe Kit x 1 ² E-Coated Back Plate x 1 ² Single-Servo Wheel Cylinder x 1 ² Springs x 2 ² Adjuster X 1

Minimum Order: 300

√ Hydraulic Drum Brakes √ 10 x 2 1/4 inch Drum √ 10" Trailer Brake √ 3500 lbs √ Marine Brake Assembly √ Free Backing √ Trailer Hydraulic Brakes √ Hydraulic Backing Plates This 10“ x 2.25” hydraulic trailer brake assembly is free backing type, fits standard 4 bolt mounting flange. The brakes work with 10 inch trailer brake drums for 3500 lbs (3.5k) trailer axles. 10” hydraulic free backing brakes incorporates a “fall-away” shoe which diminishes shoe drag when backing up. 12” or 10” trailer brake is great for boat trailers, so the hydraulic trailer brakes wholesaler usually stocks lot of them. Features l Hydraulic free-backing brakes use with a surge-type trailer brake actuator. l Free-backing design lets you reverse without trailer brakes being activated. l E-coated backing plates resist wear and corrosion. l Periodic manual adjustment required. l These hydraulic trailer brakes exchange with most axle brands including Dexter, AL-KO, Demco, and many others. Specifications Ø Dimension: 10 inch x 2 1/4 inch Ø Axle Capability: 3500 lbs Axle (13", 14”, 15" Wheel) Ø Mounting Flange Bolt Pattern: 4 bolt Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 10” x 2 1/4" Bonded Free Backing Brake Shoe Kit x 1 ² E-Coated Back Plate x 1 ² Single-Servo Wheel Cylinder x 1 ² Springs x 2 ² Adjuster X 1

Minimum Order: 300

√ Hydraulic Brake Assembly √ 12 x 2 inch Drum √ Trailer Brake Kits √ 5200 lbs, 6000 lbs, 7000 lbs √ 12” Hydraulic Brake √ Uni-Servo √ Trailer Axle Brakes √ Trailer Surge Brakes 12” x 2” hydraulic uni-servo brakes are replacement for one 5.2k – 7k lbs axle with 5 bolt pattern. The brakes are heavy duty application for 7000 lbs trailer axles. Every 12 inch hydraulic trailer brake assemblies have two pieces of non- asbestos semi metal brake shoes, bonded and riveted are available. The matched drums are 6 bolt or 8 bolt 12” brake drums. Technicians always recommend the customers to use hydraulic brake kit for tandem axles & torsion axles of boat trailers. Features l 12" hydraulic uni-servo brakes use with a surge-type trailer brake actuator (sold separately). l Manual adjustment – using fine tooth brake adjustment. l E-coated backing plates provide corrosion protection. l Pre-assembled and easy installation. l This trailer backing plate exchange with most standard hydraulic brakes, such as Dexter, Titan, Demco, Axletek, etc. Specifications Ø Dimension: 12 inch x 2 inch Ø Axle Capability: 5200 lbs Axle / 6000 lbs Axle/ 7000 lbs Axle (14.5”, 15", 16”, 16.5” Wheel) Ø Mounting Flange Bolt Pattern: 5 bolt Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 12” x 2" Bonded Uni-Servo Brake Shoe Kit x 1 ² E-Coated Back Plate x 1 ² Single-Servo Wheel Cylinder x 1 ² Springs x 2

Minimum Order: 300

√ Trailer Brakes √ 12 x 2 inch Drum √ Hydraulic Brake Assemblies √ 5200 lbs, 6000 lbs, 7000 lbs √ 12" Hydraulic Brake √ Free Backing √ Trailer Backing Plates √ Trailer Drum Brake Assemblies 12” x 2” hydraulic free backing brakes have left hand (driver’s side) and right hand (passenger’s side). The 12" drum brake assemblies require manual adjustment and mount to 5-bolt flange. Customers call these hydraulic brake assembly 5200 lb to 7000 lb (5.2k, 6k, 7k), they are same and work with 12 inch trailer brake drums. The free-backing plates will allow your trailer to back up without having the brakes lock up. We are the trailer hydraulic backing plate factory in China, all of our trailer brakes are up to OEM quality. Features l Using with surge trailer brake actuators. l Regular manual adjustment required l The trailer rolls free when backing up, even if the actuator is activated. l E-coated backing plates provide corrosion protection. l Single plunger design. l This brakes exchange with most standard hydraulic brakes, such as Dexter, Titan, Demco, Axletek, etc. Specifications Ø Dimension: 12 inch x 2 inch Ø Axle Capability: 5200 - 6000 - 7000 lbs Axle (14.5”, 15", 16”, 16.5” Wheel) Ø Mounting Flange Bolt Pattern: 5 bolt Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 12” x 2" Bonded Free Backing Brake Shoe Kit x 1 ² E-Coated Back Plate x 1 ² Single-Servo Wheel Cylinder x 1 ² Springs x 2

Minimum Order: 300

√ Forward Self Adjusting (FSA) √ 9,000 lb. – 10,000 lb. √ Trailer Backing Plate √ Trailer Axles √ Electric Brakes √ Electric Brake Assembly Features l This electric brake assemblies fit standard 7 bolt mounting flange for 9k lb. to 10k lb. trailer axles. l Forward Self Adjusting (FSA) electric brake assembly keeps the brakes adjusted automatically. l Compatible with most trailer axle manufacturers. l E-coated backing plates resist wear and corrosion l Fits 15" or larger wheels. Specifications Ø Dimension: 12.25 inch x 3.375 inch Ø Axle Capability: 9000 lbs to 10000 lbs Axle Ø Mounting Flange Bolt Pattern: 7 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 12 1/4” x 3 3/8" Electric Brake Shoe Set x 1 ² 7 Bolt Mounting Cast Backing Plate x 1 ² Magnet Lever x 1 ² Yellow Wire Magnet x 1 ² Brake Adjuster x 1 ² Long Spring x 1 ² Short Spring x 2

Minimum Order: 300

√ Trailer Backing Plate √ Electric Drum Brake √ With Parking Brake √ Trailer Brake Assembly √ Off Road Electric Brakes √ With Handbrake √ 1400 KG – 1600 KG Axle √ 10” Brake Drum 10" x 2 1/4" offroad trailer electric brake assembly with handbrake is specifically designed for extreme rugged conditions in Australia. The 10” electric backing plate mounts on standard 4 bolt flange, and it is used to work with slimline and parallel 10” brake drums. The obvious difference between off road electric brakes and electric brakes with handbrake is the magnet, off road magnet has a high-tech plastic core and that will reduce vibration, wear and high temperature damage, in order to prolong the life of electric brakes. Features l 10” x 2 1/4” Trailer Drum Brakes are recommend replacing AL-KO off road electric brakes to the caravans, campers or trailers. l E-coated backing plates resist wear and corrosion. l Periodic manual adjustment required. l Fully assembled and easily installation, mostly used for Australian offroad trailers. l Electric backing plates are an extremely efficient and reliable braking system that require minimum maintenance. l Needs only an electric brake controller to work. l High grade brake linings provide smooth efficient braking. Specifications Ø Dimension: 10 inch x 2.25 inch Ø Axle Capability: 1400 kg (13”-14” wheel) to 1600 kg (15”-16” wheel) Axle Ø Mounting Flange Bolt Pattern: 4 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 10” x 2 1/4” Electric Brake Shoe Set x 1 ² E-coat Backing Plate x 1 ² Magnet Lever x 1 ² Green Wire Offroad Magnet x 1 ² Brake Adjuster x 1 ² Long Spring x 1 ² Short Spring x 1

Minimum Order: 300

√ Trailer Brakes √ Manual Adjustment √ With handbrake √ 12 drum brake √ 12 inch electric brake √ trailer axle with brakes √ 6000 lbs trailer axle √ trailer brake kits ATM (Aggregate Trailer Mass) GTM (Gross Trailer Mass) In Australia, all trailers with ATM or GTM over 2000kg must have a Breakaway Brake setup that will immediately apply the trailer brakes in the event of the trailer becoming disconnected from the towing vehicle. Trailer axle with electric brakes always equipped with handbrake to meet the Australia Standard. Features l Electric brake assemblies with hand brake make you a better trip. l Needs only an electric brake controller to work. l 12" backing plate is electrophoretic-coated to resist corrosion. l Periodic manual adjustment required. l 12" x 2" Trailer Electric Brake Assembly with Parking can work with most electric trailer brake system 5200 lbs trailer axle, 6000 lbs trailer axle and 7000 lbs axle, including Dexter, Hayes and many others. Specifications Ø Dimension: 12 inch x 2inch Ø Axle Capability: 5200 lbs/6000 lbs/7000 lbs Axle Ø Mounting Flange Bolt Pattern: 5 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition Ø 12” x 2" Brake Shoe Set x 1 Ø E-coat Backing Plate x 1 Ø White/Black Wire Magnet x 1 Ø Magnet Lever x 1 Ø Handbrake x 1 Ø Springs x 2 Ø Adjuster x 1

Minimum Order: 300

√ Trailer Brakes √ Manual Adjustment √ Brake assembly √ 12’’ x 2’’ drum √ 12" electric brake √ 12 inch trailer brake √ 6000 lbs trailer axle √ 12" trailer drum brakes 12" drum brake assemblies are usually work with the same size brake drum for 6k lbs trailer axles. This basic trailer brake assembly are produced in huge quantity and sold million pcs per year to America and Canada. The original design for 12’’ electric brake assembly are fit for those trailer axles with the load of 6000 pounds, but with the reinforced black wire magnet, the brake assembly could work on 7000 lbs trailer axles. Features l Electric drum brakes are easy to install and control. l Needs only an electric brake controller to work. l No need actuator or hydraulic lines. l 12" electric backing plate is electrophoretic-coated to resist corrosion. l Periodic manual adjustment required. l Electric brake assembly can exchange with most 5 lug trailer axles 6000 lbs, including Dexter, Hayes and many others. Specifications Ø Dimension: 12 inch x 2inch Ø Axle Capability: 6000 lbs Axle Ø Mounting Flange Bolt Pattern: 5 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition Ø 12” x 2" Brake Shoe Set x 1 Ø E-coat Backing Plate x 1 Ø White/Black Wire Magnet x 1 Ø Magnet Lever x 1 Ø Springs x 2 Ø Adjuster x 1

Minimum Order: 300

This trailer stub axle spindle with 4 hole flange is for 10" x 2 1/4" electric or hydraulic brake assembly. A varied trailer spindles and trailer axle components are provided for the OEMs, distributors, wholesalers.

Minimum Order: 200

√Trailer Axle √Trailer Leaf Spring Axle √Trailer Torsion Axle √Trailer Tandem Axle √Trailer Drop Axle √Trailer Straight Axle √Trailer Solid Axle √Trailer Tube Axle √Trailer Independent Suspension √Trailer Unbraked Axle √Trailer Round Axle √Trailer Square Axle √Trailer Overlay Axle √Trailer V-Bent Axle We have a large variety of trailer axles with drum brake kits, disc brake kit and idler hub kits. The axles are available in leaf spring or torsion suspension from 2,000 lbs to 1,2000 lbs capacities. The tandem axles and tri axles are suitable for the heavy duty trailers, our independent suspensions and off road electric brakes are very popular in Australia Market. What’s more, we can produce it according to customer's requests, drawings or samples.

Minimum Order: 300

We are a Chinese manufacturer specializing in trailer axles, brakes, drums and hubs. We offer a great range of trailer parts to choose from, such as spring/torsion axles, 10”/12”/12.25” electric drum brakes (standard/with hand brake/self-adjusting/off-road), 10”/12” hydraulic drum brakes (uni-servo/free backing), 9” hydraulic/mechanical drum brakes, hydraulic/mechanical disc brakes, brake disc rotors, brake drums and hubs etc. E-coat, dacromet and hot dip galvanize are available. What’s more, we are able to produce trailer parts according to customer’s drawings or samples.

Minimum Order: 300