Auto Parts & Tools

√ Trailer Drop Axles √ Drop Beam Axle √ 3500 lb Trailer Axles √ 1000 kg Trailer Axle √ 5200 lb Trailer Axles √ 1450 kg Trailer Axle √ 7000 lb Trailer Axles √ 2000 kg Trailer Axle Trailer Drop axles come with a standard 4" drop. The drop axles are typically used on cargo, livestock, horse and some equipment trailers. Lowered axle beam provides lower deck height for easier loading and unloading. Trailer springs, u-bolts and hangers are not included. Features l Trailer drop axle allows the trailer to sit lower to the ground. l All axles are standard raw material, painted or galvanized are available. l Compatible with most trailer manufacturers’ axles. l Trailer drop axles are available in different capacities and sizes, customers need to provide the dimensions of axles, such as the lengths of overall, hub face and spring center. Specifications Countries , Load Capacity USA & Canada 3500 – 8000 lbs capacity, produced according to the customer’s requirements Australia & New Zealand 1000 – 2000 kgs capacity, produced according to the customer’s requirements

Minimum Order: 100

√ Trailer Suspension √ Independent Trailer Suspension √ Independent Trailer Axle √ Off-Road Trailer Axle √ Off-Road Trailer Suspension √ Trailer Axles √ Trailer Independent Suspension √ Independent Suspension System Independent suspension system allows each wheel on the trailer to move vertically, reacting to a bump on the road independent of the other wheels. In this system there is no transfer of impacts from one side of the trailer to the other, the wheels remain vertical throughout their travel and there is a greater range of movement available. This type of suspension system offers many advantages over other suspension systems such as increasing the serviceability of the system in the event of a breakdown. For those traveling offroad the lack of a cross-vehicle axle beam can also provide ground clearance advantages.

Minimum Order: 100

√ Trailer Torsion axle √ Manual Adjustment √ 7 x 1.25 inch drum √ 2200 lbs trailer axle √ 7" electric drum brake √ 7'' electric backing plate 7’’ trailer brake assemblies are usually installed to torsion axles with max capacity of 2.2k lbs . These brakes are mostly for light trailers which axles do not need leaf springs. Features l 7 inch electric brakes are easy to install and control. l Needs only an electric brake controller to work. l E-coated backing plates resist corrosion. l Periodic manual adjustment required. l Brake mounting bolts are included. l Exchange with most trailer axles not over 2200 lbs, including Dexter, AL-KO and many others. Specifications Ø Dimension: 7 inch x 1 1/4 inch Ø Axle Capability: 2200 lbs Axle Ø Mounting Flange Bolt Pattern: 4 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition Ø 7” x 1 1/4" Brake Shoe Set x 1 Ø E-coat Backing Plate x 1 Ø Round Magnet with White Wire x 1 Ø Magnet Lever x 1 Ø Returning Springs x 1 Ø Adjuster x 1

Minimum Order: 300

√ Trailer Brake parts √ Self-Adjustment √ , Trailer Axle parts √ Nev-R-Adjust √ 10" electric brakes √ trailer electric brake system √ 3500 lb trailer axle √ Trailer Axle Brakes Self adjusting electric brake assembly is a brilliant design for trailer electric brake system. Al-KO call it Nev-R-Adjust which is mainly for the trailer axles 2000lbs to 4000lbs later than 2009. It will adjust itself when the trailer axle brakes are worn thinner. The distance between brake lining and drum will always keep a very close so that the strength you step the brake pedal will never need change till the brake shoes are worn out. Features l 10 inch electric brakes are easy to install and control. l Needs only an electric brake controller to work. l No need actuator or hydraulic lines. l No need adjusts manually. l Trailer brake parts are always in the perfect distance to the drums. l Brake mounting bolts are included. l 10’’ x 2.25 self-adjust Electric brake assembly can exchange with most 4 lug trailer axles not over 4000 lbs, including Dexter, AL-KO and many others. Specifications Ø Dimension: 10 inch x 2 1/4 inch Ø Axle Capability: 3500 lbs Axle Ø Mounting Flange Bolt Pattern: 4 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition Ø 10” x 2 1/4" Brake Shoe Set x 1 Ø E-coat Backing Plate x 1 Ø Green Wire Magnet x 1 Ø Magnet Lever x 1 Ø Self-adjust cable Ø Springs x 2 Ø Adjuster x 1

Minimum Order: 300

√ With Partking √ Manual Adjust √ Trailer Brake Axle √ trailer brake assembly √ 10 x 2.25 inch drum √ electric brake trailer axle √ trailer brake parts √ 4 lug trailer axle 10 inch electric trailer brake assemblies has the completely same function as RVH, but with a very different design. 10’’ x 2¼’’ electric brake with parking feature is very hot in America. It is designed to use 10" brake drums. They offer more user control than common electric brakes. With the brake cable, the brake assembly with parking brake can work in a much safer situation. Features l electric trailer brakes with parking brake are much more reliable and easy to control. l No need actuator or hydraulic lines. l 10" trailer backing plate is E-coated to resist corrosion. l Periodic manual adjustment required. l Brake mounting bolts are included. l Manual parking brake lever included l Exchange with most trailer axle 3500 pounds, including Dexter. Specifications Ø Dimension: 10 inch x 2¼ inch Ø Axle Capability: 3500 lbs Axle Ø Mounting Flange Bolt Pattern: 4 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition Ø 10” x 2 1/4" Brake Shoe Set x 1 Ø E-coat Backing Plate x 1 Ø Green Wire Magnet x 1 Ø Magnet Lever x 1 Ø Springs x 2 Ø Adjuster x 1

Minimum Order: 300

√ Self-Adjustment √ trail , er axle parts √ Nev-R-Adjust √ trailer axle brakes √ 6000 lbs trailer axle √ trailer brake parts Self-adjusting 12" trailer drum brakes is a very nice design for trailer brake system. Al-KO call it Nev-R-Adjust. With the fine-tooth adjuster, with the adjuster cable, self adjusting electric brake assembly will adjust the distance between brake lining and trailer brake kit drum. Features l 12 inch electric brake assembly is easy to install and control. l 12 inch x 2 inch trailer electric backing plate is electrophoretic- coated. l Needs only an electric brake controller to work. l No need manual adjustment. l Self-adjusting 12 inch trailer brakes can work with most electric brake trailer axle 6000 lbs including Dexter, Hayes and many others. Specifications Ø Dimension: 12 inch x 2inch Ø Axle Capability: 6000 lbs Axle Ø Mounting Flange Bolt Pattern: 5 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition Ø 12” x 2" Brake Shoe Set x 1 Ø E-coat Backing Plate x 1 Ø Black/white wire Magnet x 1 Ø Magnet Lever x 1 Ø Adjust cable x 1 Ø Springs x 2 Ø Adjuster x 1

Minimum Order: 300

√ Mobile Home Axle (MHA) √ For 4500 LB - 6000 LB Axle √ 12” Drum Brake √ One Time Use √ Dexter Type √ Electric Brake Assembly Features l The 12” Electric Brake Assemblies are specialized for Mobile Home Axles. l Dexter Axle Co., develop mobile home axles in order to reduce the cost of suspension system. l This system was not approved by DOT, but approved by HUD (Housing and Urban Development). l Assembly comes complete with magnet, arm, and weld on backing plate. l Mobile home electric brake assembly is welded onto the beam and not intended to be field replaced. Specifications Ø Dimension: 12 inch x 2 inch Ø Axle Capability: 4500 lbs to 6000 lbs Axle Ø Installation Method: Weld On Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 12” x 2" Electric Brake Shoe Set x 1 ² Weld On Back Plate x 1 ² Round Magnet with Spring x 1 ² Magnet Arm x 1 ² Brake Adjuster x 1 ² Long Spring x 2 ² Short spring x 1

Minimum Order: 400

√ Trailer Brakes √ 9,000 lb. – 12,000 lb. √ Electric Backing Plate √ Trailer Brake Assembly √ Self-Adjusting

Minimum Order: 300

√ Trailer Backing Plate √ 10,000 lb. √ Electric Brake Assembly √ Forward Self Adjusting (FSA) √ Trailer Drum Brakes √ Electric Drum Brakes √ 12 1/4” x 4” Drum √ Trailer Brakes 12-1/4" x 4" trailer electric brake assemblies are self-adjusting brakes, these 12.25 inch trailer brakes fit 10,000 lbs trailer axles. The mounting plate is 7 hole pattern. Features l 12.25” x 4” Trailer Drum Brakes fit 7 mounting flange for 10k lb. trailer axles. l Self-adjusting electric brake assembly don’t need for manual brake adjustments. l Completely assembled and easily installation, can exchange with most trailer brake manufacturers. l The brake linings are high quality non-asbestos, semi-metal friction material. l Fits 16" or larger wheels. Specifications Ø Dimension: 12.25 inch x 4 inch Ø Axle Capability: 10000 lbs Heavy Duty Axle Ø Mounting Flange Bolt Pattern: 7 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 12 1/4” x 4" Electric Brake Shoe Set x 1 ² 7 Bolt Mounting Cast Backing Plate x 1 ² Magnet Lever x 1 ² Yellow Wire Magnet x 1 ² Brake Adjuster x 1 ² Long Spring x 1 ² Short Spring x 2

Minimum Order: 300

√ Trailer Electric Brakes √ 12,000 lb. -15,000 lb. √ Electric Backing Plate √ Forward Self Adjusting (FSA) √ Trailer Axles √ Trailer Drum Brakes √ 12 1/4” x 5” Drum √ Trailer Brake Assembly 12-1/4" x 5" forward self adjusting trailer electric brake assembly automatically adjusts for optimum braking performance. The trailer brakes have the strongest stopping power, and can fit 12,000 lbs to 15,000 lbs trailer axles. The mounting plate is 7 hole pattern. Features l 12.25” x 5” Trailer Drum Brakes fit 12k lb. to 15k lb. trailer axles with 7 hole flanges. l Trailer electric brake assemblies are designed for non-marine applications. l Completely assembled and easily installation. l The brake linings of non-asbestos, semi-metal friction material are bonded on the brake shoes. l Electric brakes have more moving parts for replacement than hydraulic brakes, this can offer more user control and reduce the maintenance cost. l Fits 16" or larger wheels. Specifications Ø Dimension: 12.25 inch x 5 inch Ø Axle Capability: 12000 lbs – 15000 lbs Heavy Duty Axle Ø Mounting Flange Bolt Pattern: 7 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 12 1/4” x 5" Electric Brake Shoe Set x 1 ² 7 Bolt Mounting Cast Backing Plate x 1 ² Magnet Lever x 1 ² Blue Wire Magnet x 1 ² Brake Adjuster x 1 ² Long Spring x 1 ² Short Spring x 2

Minimum Order: 300

√ Hydraulic Drum Brakes √ 9 x 1.75 inch Drum √ Trailer Brake Systems √ 1200 kg √ Hydraulic Brake Set √ 1450 kg √ Duo-Servo √ T , railer Hydraulic Backing Plate 9” x 1.75” hydraulic trailer drum brake comes complete with shoes, springs and hydraulic cylinder ready to bolt on. The maximum capacity of one 9" hydraulic trailer drum brake kit is 1200 kg for 15” or 16” wheel, and 1450 kg is for 13” or 14” wheel. 9” hydraulic backing plate mounts on standard 4 bolt flange. 9” trailer brake assemblies are most often used to tow boat trailers and most RVs in saltwater. The 9 inch hydraulic brakes need less ongoing maintenance than 9 inch mechanical brakes, but be more expensive to install or replace. Features l Requires Wheel Cylinder and hydraulic lines (sold separately). l E-coated backing plates resist wear and corrosion. l Less ongoing maintenance. l These 9” hydraulic trailer brakes exchange with most axle brands including AL-KO and many standard brakes. l Fully Assembled; Quick and easy installation. Specifications Ø Dimension: 9 inch x 1 3/4 inch Ø Axle Capability: 1200 kg Axle (15”/ 16” Wheel), 1450 kg Axle (13” / 14” Wheel) Ø Mounting Flange Bolt Pattern: 4 bolt Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 9” x 1 3/4" Brake Shoe Kit x 1 ² E-Coated Back Plate x 1 ² Wheel Cylinder x 1 ² Long spring x 1 ² Short spring x 1

Minimum Order: 400

√ Trailer Brake Drum Kit √ 10 x 2 1/4 inch Drum √ Galvanized Trailer Brakes √ 3500 lbs, √ 10" Hydraulic Brakes √ Uni-Servo √ < , br>Boat Trailer Brakes √ Dacromet Hydraulic Drum Brakes This 10" hydraulic uni-servo brake contains one set of riveted dacromet brake shoes, dacromet backing plate, stainless steel springs and an aluminum wheel cylinder. This 3.5k trailer brake assembly is built to the highest standards of the RV industry and will last a long time. Our 10 inch trailer brake has 4 holes with most major brands of axles, without modifying the axle or mounting flange. Hot dip galvanized is available. Features l Using with a surge-type trailer brake actuator. l Dacromet / Galvanized coated offers the best value of protection for salt water applications. l Fine-tooth brake adjustment gears allow for a more precise setting l Periodic manual adjustment required. l This brakes exchange with most quality hydraulic brakes, such as Dexter, Demco, Hayes, Titian, Atwood etc. Specifications Ø Dimension: 10 inch x 2 1/4 inch Ø Axle Capability: 3500 lbs Axle (13”, 14”, 15” Wheel) Ø Mounting Flange Bolt Pattern: 4 bolt Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 10” x 2 1/4" Riveted Uni-Servo Brake Shoe Kit x 1 ² Dacromet / Galvanized Back Plate x 1 ² Single-Servo Aluminum Wheel Cylinder x 1 ² Stainless Steel Springs x 2

Minimum Order: 300

√ Hydraulic Drum Brakes √ 10 x 2 1/4 inch Drum √ Trailer Backing Plates √ 3500 lb √ Hydraulic Trailer Brake System √ Free Backing √ Trailer Brake Assembly √ Galvanized Trailer Hydraulic Brake The 10” x 2.25” hydraulic free backing brake has two coated, dacromet and galvanized, it’s 3500 lbs axle hydraulic brake uses 4 bolt mounting flanges. Because 10" free backing brake assembly lacks electrical parts, there are a pair of rivered brake shoes and stainless-steel springs, a trailer with hydraulic brake can safely be backed into water. So this 10" trailer brake perfect for boat trailers. Features l Using with a surge-type trailer brake actuator. l Dacromet / Galvanized coated delivers better corrosion protection than standard finish. l Periodic manual adjustment required. l Mounting bolts and hardware sold separately l This brake fits on 3.5k lb axles with hydraulic drum brakes, such as Dexter, Axis, Rockwell, Atwood etc. Specifications Ø Dimension: 10 inch x 2 1/4 inch Ø Axle Capability: 3500 lbs Axle (13”, 14”, 15” Wheel) Ø Mounting Flange Bolt Pattern: 4 bolt Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 10” x 2 1/4" Riveted Free Backing Brake Shoe Kit x 1 ² Dacromet / Galvanized Back Plate x 1 ² Single-Servo Aluminum Wheel Cylinder x 1 ² Stainless Steel Springs x 2

Minimum Order: 300

√ Hydraulic Drum Brake Assembly √ 12 x 2 inch Drum √ Trailer Hydraulic Brakes √ 5200 lb, 6000 lb, 7000 lb √ Hydraulic Backing Plate √ Uni-Servo √ 12" Trailer Brake Assembly √ Manual Adjustment The 12 inch trailer hydraulic brakes fit 14 1/2” to 16 ½” wheels. The mounting flange is 5-bolt pattern. This 12 inch trailer brake has marine - grade (galvanized or dacromet coated) steel, it offers superior corrosion resistance. Trailer hydraulic uni-servo brake wholesaler recommend these to customers who want to replace the boat trailer brakes of 5.2k lbs, 6k lbs or 7k lbs axle. Features l Designed for use with surge-type trailer brake actuators. l Dacromet / Galvanized coated offers the best value of protection for salt water applications. l Uni-Servo brakes have 15 - 20 percent braking in reverse. l Periodic manual adjustment required. l This brakes exchange with most quality hydraulic brakes, such as Dexter, Demco, Hayes, etrailer, LCL etc. Specifications Ø Dimension: 12 inch x 2 inch Ø Axle Capability: 5200 lbs, 6000 lbs, 7000 lbs Axle (14.5", 15", 16" and 16.5"Wheel) Ø Mounting Flange Bolt Pattern: 5 bolt Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 12” x 2" Riveted Uni-Servo Brake Shoe Kit x 1 ² Dacromet / Galvanized Back Plate x 1 ² Single-Servo Aluminum Wheel Cylinder x 1 ² Stainless Steel Springs x 2

Minimum Order: 400