Cable Manufacturing Equipment

The IC697BEM711 is a Bus Controller Module manufactured by GE Fanuc, designed for use in the GE Series 90-70 Programmable Logic Controller (PLC) system. This module provides high-speed communication between the PLC and various devices connected through the bus, ensuring efficient data transfer and coordination across the system. Key Features: High-Speed Communication: Provides fast and reliable communication between the PLC and other modules or external devices on the bus network. VME Bus Interface: Uses the VME bus interface for data exchange, which allows for large data handling and system flexibility. Plug-and-Play Design: Easy to install and integrate into existing systems, with minimal setup required. Diagnostics and Monitoring: Equipped with built-in diagnostics capabilities for real-time system monitoring and error detection. Multi-Device Support: Supports communication with multiple devices simultaneously, ensuring smooth operation of complex systems.

Minimum Order: 1 bags

Professional connector crimping equipment, designed for specifically for processing high-end, precision wire it replaces the traditional soldering together of wires with splice band crimping, without cold solder and air pollution.With humanization design, it is easy to operate. It adopts automatic conveyor with continuous for copper terminal (patent’s in the official records please don’t counterfeit), it can finish the processes of cutting, shaping and crimping in one time without scraps, saving cost. The mold is customized according to the wire size and the splice band specifications, and different wire size are configured with different mold. If the wire size is same, and the splice band size is changed, that need to accord request to do different mold. Splice band processed by special lines, and after riveting, the tension- resistant will be particularly strong, which ensures the stable quality. Function: Equipment adopt 1.0KW servo motor Equipment adopt Touch screen control debugging. a. terminal splice high b. terminal pressing power c. terminal pressing keep time d. equipment Install pressure testing device e. using stepper drive feed f. equipment 90% vertical operation g. equipment installed according to customer requirements monitor control pressure contact Copper width: . Splice width is according product and require to choose, according for different industry product has 3 standards. . 2MM: high precision, low current products, electronic and common product; . 4MM: common standard product; . 6MM: High current products, power connection. High tensile strength. Technical data: Splice force:2.0 Ton (can adjust) Splice time:0.01S (can adjust keep crimp time) Stop splice machine:Can adjust Motor rating:0.75KW Servo motor Power supply:AC220/50HZ Wire diameter:AWG24#-AWG10# Feeding length parameters:1mm-99.9mm Cooper width:1.0-6.0mm splice precision:0.1-0.2(±0.05m) Dimensions:340*360*4 , 50mm Crimp Pull Power:Within 15KG Weight:65KG Driving way:Servo motor, stepping feeding

Minimum Order: 1 bags

Characteristics: 1. This machine is specially designed for cutting a series of rough pipes, such as bellows corrugated tube, silicon rubber pipe, rubber pipe, oil seal pipe, coffee pipe, medical tubing, gas pipe, water pipe and so on. It adopts caterpillar feeding control, with high precision and high speed. 2. The cutting device adopts the design of art knife, the cut is flat, blade cost is low, and the replacement is simple and convenient. 3. Feeding by steppingmotor,whichhas the characteristics of stable feedingand accurate length. The circuit adopts high-precision single chip integrated control, simple operation and stable control. The screen adopts touch-screen color screen to display all kinds of data at a glance. Technical Parameters: Model No. HWN-86A Voltage AC220V Power 560W N.W./G.W: 66/84KG Cutting Speed 60-210 cuts per minute Cutting Accuracy +/- 0.1mm Cutting Length 0.1-99999.9mm Cutting Diameter Max 38mm Dimension (LxWxH) 650x480x420mm

Minimum Order: 1 bags

This single granule terminal crimping machine(benchtop crimping press) adopts high-tech inverter technology, electronic precision positioning, avoids traditional terminal crimping machine clutch electromagnet common failure. Description： Power saving environmental protection, motor runs when machine is working. Machine mould continuum, no need to change mould, quick save time. Voltage stability, speed, high accuracy. Suitable for crimping computer terminal, DC terminal, single grain terminal, joint terminal. Light and handy structure, easy moving workplace, mute operation. Specifications Model No. LL-1.0T LL-1.5T LL-2.0T LL-3.0T LL-4.0T MaxPressure 1 Ton 1.5Ton 2.0Ton 3.0Ton 4.0Ton Mold Type Fixed Mold OTP Mold,#2000 Mold, JST Mold etc Power Supply 220V/50Hz Air Pressure Full Electric, No need air compressor Power Rating 250W 550W 750W 1000W 1500W Net Weight 25KG 35KG 50KG 55KG 75KG Size (MM) 250x210x460 280x250x600 320x280x650 320x280x660 350x320x720

Minimum Order: 1 bags

This semi-automatic h05vv-f stripper crimper machine is mainly used for: USB data cable, power cable, earphone cable, audio cable, stripping and crimping several core wires completed at one time, scrap insulations will be blown away by compressed air to ensure crimping depth 100% consistent. Use advanced CPU to control the precision of each action and improve the working efficiency. 1. Mainly used for: USB data cable, power cable, earphone cable, audio cable, stripping and crimping several core wires completed at one time, scrap insulations will be blown away by compressed air to ensure crimping depth 100% consistent. Use advanced CPU to control the precision of each action and improve the working efficiency. 2. High speed: 0.2 seconds crimping speed each time improves the working efficiency. 3. Mute: Step on the pedal and the motor works. Don’t step on it, it won’t work. Therefore, the noise generated by the rotation of the motor and the huge noise generated by the mechanical clutch and electromagnetic collision are eliminated. 4. Intelligent control, which accurately realizes basic functions such as wide speed regulation and precise positioning, and increases the number of workers leaving their posts, the processor automatically cuts off the power supply, and switches lighting and other intelligent management. 5. Energy saving: It saves the energy consumption to the greatest extent as 10x240W=25W/HRS. This machine is 40000×0.2(s/pcs)/3600x2500w=0.556kw/hrs. Compared with the two, the single machine and single shift can save energy nearly 2KW . 6. Long-term maintenance-free: Use electrical control instead of mechanical clutch or electromagnetic clutch, which effectively eliminates the hard contact between machines and reduces wear. In addition, all transmission parts have been treated with hydrogen permeation, which increases the strength and wear resistance. The compact reducer and motor are used as the main power source. Size: 300x280x450mm Crimping force: 2ton Stroke: 30mm Weight: 85KG Power Source: AC220V 50Hz Power: 750W Safety device: Top dead center sensor

Minimum Order: 1 bags

This Vibrator Bowl Insulated Crimp Ring Terminal Wire Terminating Machine, using high-tech frequency conversion technology, precise electronic positioning, when pressing, the motor working noise is smaller than the traditional terminal machine, and power saving, mode adjustment is more convenient and fast, to avoid common faults such as traditional terminal clutch, electromagnet and so on. 1. Adopt the latest intelligent digital voltage regulation and vibration feeding controller, and add PLC program. 2. Cylinder and die are used to feed at the same time, so that the feeding is more accurate, faster, better stability, and basically no stuffing phenomenon. 3. Improving the design of slope track, speeding up the transmission of terminals, the stuffing basically disappeared. 4. 2T ultra-silent wire crimping machine, no noise, safer employees, using card-type mold, easy to unload. 5. Using infrared control, when the track is full of terminals, the vibrating disc stops automatically. 6. Replacing expensive continuous terminals and adopting economical bulk terminals can save cost. 7. It is the best choice for small and medium-sized enterprises to replace singles electric small punches, improve the safety of workers and run at a speed comparable to that of connecting terminals. Power Source: AC220V/50Hz Power: Motor 250W / Vibrator bowl: 120W Net Weight: 130kg Dimension: 450x860x1360mm Crimping: 2Ton Slide Stroke: 30mm Crimping Frequency: 120times per hour Closure Height: 26mm Closure Height Adjust: 10mm Appropriate Terminal Type: Loose terminal Production: 7200pcs/hour

Minimum Order: 1 bags

This 12k crimps/hour 1.5T ribbon cable crimping machine can replace the OTP transverse die arbitrarily,simpler than the old model, fast debugging,output can reach 12000 pcs per hour. It adopts new NC debugging parameters and LCD display. It eliminates the steps of difficult mold adjusting, and has exquisite design,greatly reduces the labor intensity of workers, improves production efficiency and effectively controls the undesirable rate. Easy operation and free maintenance. Technical Parameter Size:260*300*780mm(L*W*H） Weight , :80KG Power Source: Single Phase 220VAC/ 50/60HZ,10A Display: Chinese/English (English refers to user manual) Total Power:550W Cylinder Pressure:0.4-0.7MPa（adjustable） Working Efficiency: 12000 crimps/hour（cauculated as 12Pins above ribbon cable) Appropriate Wire: 0.8-2.0mm,AWG20-28, Red Blue White FBC（2468）,Grey FBC（2651）,Color FBC and etc 2-40pins Cutting Length:>70mm Ribbon Cable Split Length: 30mm Crimping Strength: 1.5T

Minimum Order: 1 bags

1. This fully automatic AWG32-14 wire stripper terminator use true color touch screen,easy to operate,precise stepping motor and its driver,accurate and stable. 2. The parameters can be adjusted by setting the touch screen: whether the wire both ends are fully stripped or not, whether the wire both ends are partially stripped or not, whether the wire both ends are crimped or not. 3. Wire cutting length,wire stripping length and incision depth can be adjusted by touch screen. 4. The crimping device adopts universal mute terminal crimping machine with low noise and stable performance, it can carry transverse/direct applicator. Product name: Fully automatic double-ends single wire terminal crimping machine Wire size: 0.08-3.0mm2 (AWG#32-14) Production: both-ends crimping: 4500 bars per hour (decided by different wire cutting length) Function: both-ends full stripping, both-ends partial stripping, both- ends terminal crimping Wire Cutting Length: 35-9999 mm Cutting Accuracy: 0.2 + (set cut-off length * 0.002) Wire Stripping Length: Wire front stripping: 1.00-15.00/25.00 mm; Wire tail stripping: 1.00-8.00 mm Detection device: Wire detection, wire knotting detection, improper crimping detection, etc. Power Source: Single phase: AC220V 20A

Minimum Order: 1 bags

This rotary coaxial cable stripping machine is mainly used for processing coaxial cable and special single wire, using the most advanced rotating turret, to improve the accuracy and speed. Use of specific tools and rotary axis positioning device, and can strip up to 9 layers without changing the blade corresponds to the processing of various sizes and sheath wire, and is equipped with freely set controller modular, digital display cutting diameter. Device Name: 4806 Rotary Coaxial Cable Stripping Machine Technical parameters: Max cable diameter: 0.81-up to6.99 mm Cutting Unit Depth: 0.01mm Stripping Length: 48mm Stripping layers: 9 Drive mode: motor / ball screw drive (imported from Japan) Display: Touchscreen Blade: 2, Material: tungsten steel imports Switzerland Centering sheet: 2, Material: tungsten steel imports Clamp means: self-aligning, motor drive, the clamping force control program Productivity: 500-700pcs / h (depending on the cable type and length dependent) Open: Manual / Sensor Power: 220V / 50HZ Power: 250W Net Weight: 25KG Dimensions: 525X186X278 mm

Minimum Order: 1 bags

This most advanced electronic product has more compact structure design, more wires can be processed, and higher precision. All debugging actions are completed in the LCD panel. The model of wire cutter and stripping machine efficiency is more than 30% faster than the traditional model. According to the requirements, the cutting speed can be adjusted (0-9 level) to complete the three sectors stripping requirements. Model No. HWN-220 HWN-220+T Dimension 450x450x360mm 450x720x360mm Net. Weight 40KG 60KG Cutting Length 0.1-9900mm (The shortest remaining insulation length in normal medium stripping is 35mm.) Stripping Length Front stripping: 0.1-30mm (depending on type of wire) Rear stripping: 0.1-50mm (depending on type of wire) Twisting Length Front stripping: 0.1-30mm (depending on type of wire) Rear stripping: 0.1-50mm (depending on type of wire) Wire Diameter AWG16-AWG32 Cutting Error 0.2mm+Lx0.2% Voltage AC 110V-220V (50/60Hz) Power Machine stop working:20W, max is 220W.

Minimum Order: 1 bags

This most advanced electronic product has more compact structure design, more wires can be processed, and higher precision. All debugging actions are completed in the LCD panel. The model of wire cutter and stripping machine efficiency is more than 30% faster than the traditional model. According to the requirements, the cutting speed can be adjusted (0-9 level) to complete the three sectors stripping requirements. Model No. HWN-220 HWN-220+T Dimension 450x450x360mm 450x720x360mm Net. Weight 40KG 60KG Cutting Length 0.1-9900mm (The shortest remaining insulation length in normal medium stripping is 35mm.) Stripping Length Front stripping: 0.1-30mm (depending on type of wire) Rear stripping: 0.1-50mm (depending on type of wire) Twisting Length Front stripping: 0.1-30mm (depending on type of wire) Rear stripping: 0.1-50mm (depending on type of wire) Wire Diameter AWG16-AWG32 Cutting Error 0.2mm+Lx0.2% Voltage AC 110V-220V (50/60Hz) Power Machine stop working:20W, max is 220W.

Minimum Order: 1 bags

This H05VV-F jacket core stripper cutter automatically cut and strip outer jacket and pvc insulations of h05vv-f 2/3/4/5 core cable, not hurt core copper wires,100 different programs can be saved for calling anytime. Easy operation, unmanned and good performance. Technical parameter： Model：SWT508-YHT2 Machine dimension：700mm×660mm×430mm Weight：85KG Power：850W Voltage：220V/110V 50/60HZ Operation interface：English/Chinese（Using 7 Inch Touch Screen） Processing outer diameter of round sheath line：3-10 mm Machinable core number：2cores, 3cores, 4cores, 5 cores Gas pressure：0.3-0.6Mpa Maximum diameter of conduit：Diameter 11 Peeling accuracy：±0.2mm Cutting length：Maximum 400m Stripping length of outer line：20-150mm Stripping length of core line:Front end 3-10MM，Rear end 3-30MM Material of cutting tools：4 pieces of knife are made of high speed steel. Productivity(200mm Length per unit)：650pcs/hour Drive system：8 rollers Electric machinery ball screw driver If your wire is flat sheathed cable, you can choose our fully automatic sheath cable wire stripping machine.

Minimum Order: 1 bags

This fully automatic nm cable stripper machine on submersible pump cable uses hybrid drive, SMC pneumatic components, microcomputer full LCD control system, with a wheel function to improve the length and stability of the stripping length. • ) nm cable: outer sheath and insulation of multi conductor cable can be one-time processing completed. • ) power cord: outer sheath can be stripped only. Model No. BJ-900 Function Wire cutting, both-ends stripping, middle stripping Applicable Wire Size 0.1-10 Sq.mm (AWG32-AWG10) Speed 1000-4000 pieces per hour (decided by wire) Wire Cutting 0.1-99999.9mm Stripping section 13 Wire Stripping Strip front: 0.1-250mm Strip tail:0.1-70mm Motor accuracy 0.1mm per step by mute stepper motor Function Automatic wire inlet/outlet, timing start Driven Mode 4 wheels Machine Size 420(L)mmx297(w)mmx345(H)mm Net Weight 28KGS Cutter Material Imported Tungsten Steel or High speed Steel

Minimum Order: 1 bags

This fully automatic 13awg-1/0awg (2.5-50sqmm) wire stripping machine uses a hybrid drive microcomputer control system of the whole LCD screen, in the processing range can be arbitrarily set the length of the cutting wire,stripping length,quantitive, time to start function,manufacturing for large square wire cable,especially for processing of the automotive,power distribution box (BV cable,BVR cable), can customize to process wire diameter 10mm/3/0gauge/80sqmm wire. Technical Paramters: Model No.: BJ-980 Function: Wire cut, both-ends strip, multi-step strip Cutting Wire Core: 2.5-50 sqmm (BV 25 sqmm, BVR 50 sqmm) Customize model can reach 80 sqmm. Production/Speed: 800-2000 pcs/hour Cutting Length: 0.1mm-99999.9mm Multi-step Strip: 13 steps Stripping Length: Strip front 0.1-200mm Strip rear 0.1-120mm Accuracy of inlet outlet motor: Mute Hybrid Stepping Motor 0.1mm per step Remark Function: Auto-outlet, Auto-inlet, Timing start Driving Mode: 8 wheels Dimension: 530X430x330mm Net weight: 45KG Blade material: Import tungsten steel/Highspeed steel

Minimum Order: 1 bags