Building Materials

Ceiling Board 1. Introduction Kam Chung ceiling board is made of calcium silicate board in size 595*595mm or 603*603mm. It comes with a harmless coating on surface and selectable patterns. Due to the advantages of calcium silicate board, it’s good against moisture and heat and insects, thus an ideal replacement of gypsum board. Furthermore, it’s easy to install and helps to reduce labor cost. 2. Application Kam Chung ceiling board can be applied to office, apartment, villa, super market, workshop, hospital, school etc. For one thing, it is used as false ceiling to make a place look better. For another, it is applied to keep away heat and save energy. Generally speaking, it’s a green and durable building material. 3. Specifications Size (mm) 595*595, 603*603, Thickness (mm) 4 –10 Moisture content (%) ≤10 Density (g/cm3) 1.15-1.4 Wet Expansion Rate(%) 0.25 Thermal Conductivity (W/m•K） ≤0.30 Non- combustibility GB 8624-2006 Class A 4. Advantages (1). Fireproof (2). Insect-free (3). No-denting (4). Long lifespan (5). Moisture proof (6). Energy-saving (7). Easy installation (8). Environment-friendly 5. Installation Processes for False Ceiling (1). Draw lines on ceiling according to construction plan, and install hanging bars. (2). Install main keels by following sequences. (a) Use size UC50 or U38 steels as main keels and the distance between two keels is 1200mm. (b) Hangers must be installed on main keels and fasten by screws. If the main keel is not long enough, there must be a overlap on the joint point with a hanger clip. (c) Remember to check the leveling all the time. (d).It is required to use T-shape reinforced sub keel when installation is near lamp and ventilation outlet. (e) After installation of edge keel, check leveling of the whole system again. Adjust the edge keels first, and then the sub keels in accordance with them. If it is necessary you can adjust the main keel. (f). Choose appropriate size and thickness of ceiling board as per design. Normally we use 603*603*6mm. White gloves are recommended when installing the boards to avoid spots and dust.

Minimum Order: 666

Fiber Cement Board 1. Introduction Fiber cement board is another most widely used building material in China. It could be used as wall and floor panel both inside and outside buildings due to its better performance than calcium silicate board. With main ingredients of Portland cement, quartz powder, slaked lime and fiber, being processed with high pressure and high temperature, fiber cement board turns into a very strong panel with same structure of marble. Moreover, by the improvement of technologies, we are able to produce it without any asbestos, which is really good for human health. 2. Application Fiber cement board is good against water and heat, lighter than concrete but with high bending strength, thus good to be used for outdoor wall cladding, flooring, billboard, wall separation etc. It’s an ideal replacement of concrete. 3. Specifications Size (mm) 2440*1220, 2400*1200, 3000*1200, Thickness (mm) 4.5 – 30 Water absorption (%) ≤40 Density (g/cm3) 0.95-1.45 Wet Expansion Rate(%) 0.25 Thermal Conductivity (W/m•K） ≤0.3 Bending Strength(MPa) 5.5-16 Non- combustibility GB 8624-2006 Class A 4. Advantages (1). Durable (2). Fireproof (3). Insect-free (4). Waterproof (5). Easy installation (6). Environment-friendly 5. Installation Processes for Exterior Wall Cladding (1). Clean up walls and boards. (2). Draw lines on walls according to construction plan. (3). Reserve holes for doors, windows or other equipments. (4). Drill holes on walls according to the lines mentioned above, and then use stainless steel anchor bolt to fasten zinc-plated angle steels on them. (5). Use stainless steel screws to fix L-shape keels and angle steel. (6). At external corners and internal corners, use long L-shape angle steels to fasten two keels by rivets, making the whole keel system strongly combined together. (7). Use bolts to fasten hangers that connected to L-shape angle steels. (8). Fix 4 corners of fiber cement board on 4 hangers. Make sure the lower corners connected to lower hangers are sitting right on lower L-shape keels, and upper ones on upper keels (9). Fill connecting joint of boards with 3 mm thick sealing glue when they are fastened. (10). Repeat the process for other panels and don’t forget the waterproof treatment. (11). Double check the whole project and do the cleaning.

Minimum Order: 666

Calcium Silicate Board 1. Introduction Calcium silicate board is a most widely used material in China due to its good performance and easy-processing feature. It is moisture proof and heat resistant, so it is commonly used for wall and ceiling to keep away humidity and to slow down the spread of fire. What is more, it can be cut, nailed and screwed, making installation much easier. Then labor cost could be reduced as well. 2. Application Calcium silicate board is moisture proof and heat resistant, strong and durable, thus commonly used as wall and ceiling for house, office, warehouse, shopping mall, residential complex etc. 3. Specifications Size (mm) 2440*1220, 2400*1200, 3000*1200, Thickness (mm) 4.5 – 20 Moisture content (%) ≤10 Density (g/cm3) 1.15-1.5 Wet Expansion Rate(%) 0.25 Thermal Conductivity (W/m•K） ≤0.30 Bending Strength(MPa) 9-12 Non- combustibility GB 8624-2006 Class A 4. Advantages (1). Durable (2). Insect-free (3). Moisture proof (4). Heat-insulated (5). Easy installation (6). Safe and Harmless 5. Installation Processes for Interior Wall (1). Draw lines according to construction plan and install door frames. (2). Install top keels and floor keels according to the lines. Fix the keels on base walls with nails, and the distance between nails is 600mm. (3). After installation of top and floor keels, mark down the installation points of vertical keels, with 450mm distance between each other. Then check positions of door and other holes and avoid installing boards on their frames. (4). Install vertical keels according to installation points. Two ends of vertical keels should be separately installed into top keels and floor keels. Fix them after adjusting and leveling. Keels near walls or poles should be fastened by screws or nails, and the screw/nail distance is 1000mm. (5). When walls are higher than 3m, it is required to install through keels, which should be fastened by nails or screws. (6). Check the installation of keels and door frames and make sure they are suitable for board installation. Install the boards starting from door frame or from one end of the walls if there is no door frame. Calcium silicate boards should be fastened by self-tapping screws. Distance between screws is 200mm (near walls) and 300mm (away from walls). Distance between screw and board is no less than 10mm and no more than 16mm. When fixing screws, boards must be close to keels. Then install electric pipes, water pipes, electric cabinet and other fire-proof, sound-proof, water-proof materials. Repeat the same procedures and install the boards from the other side. But seams must be staggered from the first side. For a dual-layer wall installation, seams of the second layer should be staggered from those of the first layer as well. (7). There are 3 methods to deal with calcium silicate board joints, which are bed joint, deep seam and taped seam. The processes are as follows. Puttying: Cleaning away dust between gaps and put putty into it, making it smooth on surface. Pasting binding tapes: Put binding materials on it when the putty is finished. First scrape off a thin layer of putty, about 1mm thick and same width as the tapes. Then put the bonding tapes on it and fasten it by driving out the air inside. Scraping the middle-layer putty: As soon as pasting the binding tapes, scrape a middle-layer putty about 80mm wider than binding tapes, thickness about 1mm, making the tapes sunk into the putty. Flattening: Use a big scraper to fill the wedge groove and board with putty and smooth the surface.

Minimum Order: 666

We specialized in the research,development and production of wood veneer material and product.All of our products comply with international quality standards and are greatly appreciated in a variety of different market throughout the world. If you are interested in any of our products or would like to discuss a custom order,pleas feel free to contact us.We are looking forward to forming successful business relationships with new clients around the world in the near future. Wrapping veneer:largesize:2x8'.Norma size:width:15cm+Length :panel length+ naturalsize:width 10cm+,joint length or natural length.paper or nonwoven back.main species:ash,beech,maple,oak,walnut,teak,sapele,aca , cia,etc flooring veneer size: 450*75/90*2/3 ABC 600*90/125*2/3 ABC 900*150*2/3 ABC 1200*165/150*3 ABC 1200*190*2 ABC 1200*190*3 ABCD 1900*165*2/3 ABC Edge band veneer size:t:0.2-3mm,width:10-150mm.Roll l:50-300m.Conductive tape available. PSAVeneer for door and curved plywood:strong and flexible big size 2'x8'.customed size available.

We specialized in the research,development and production of wood veneer material and product.All of our products comply with international quality standards and are greatly appreciated in a variety of different market throughout the world. If you are interested in any of our products or would like to discuss a custom order,pleas feel free to contact us.We are looking forward to forming successful business relationships with new clients around the world in the near future. Wrapping veneer:largesize:2x8'.Norma size:width:15cm+Length :panel length+ naturalsize:width 10cm+,joint length or natural length.paper or nonwoven back.main species:ash,beech,maple,oak,walnut,teak,sapele,aca , cia,etc flooring veneer size: 450*75/90*2/3 ABC 600*90/125*2/3 ABC 900*150*2/3 ABC 1200*165/150*3 ABC 1200*190*2 ABC 1200*190*3 ABCD 1900*165*2/3 ABC Edge band veneer size:t:0.2-3mm,width:10-150mm.Roll l:50-300m.Conductive tape available. PSAVeneer for door and curved plywood:strong and flexible big size 2'x8'.customed size available.

We specialized in the research,development and production of wood veneer material and product.All of our products comply with international quality standards and are greatly appreciated in a variety of different market throughout the world. If you are interested in any of our products or would like to discuss a custom order,pleas feel free to contact us.We are looking forward to forming successful business relationships with new clients around the world in the near future. Wrapping veneer:largesize:2x8'.Norma size:width:15cm+Length :panel length+ naturalsize:width 10cm+,joint length or natural length.paper or nonwoven back.main species:ash,beech,maple,oak,walnut,teak,sapele,aca , cia,etc flooring veneer size: 450*75/90*2/3 ABC 600*90/125*2/3 ABC 900*150*2/3 ABC 1200*165/150*3 ABC 1200*190*2 ABC 1200*190*3 ABCD 1900*165*2/3 ABC Edge band veneer size:t:0.2-3mm,width:10-150mm.Roll l:50-300m.Conductive tape available. PSAVeneer for door and curved plywood:strong and flexible big size 2'x8'.customed size available.

Minimum Order: 500

The threads of fully threaded studs are distributed on the surface of the whole bolt, which is used to connect parts with large thicknesses and compact structures. Or it is not suitable to use bolted connection due to frequent disassembly. Full thread stud standard are mainly used in the connection between machines. All items are produced in strict accordance with industry standards or client- specific requirements.     As an industrial fastener manufacturer, we provide stud bolt fully threaded, stud full thread, connecting stud, guide stud, full threaded stud, long stud, locating studs, threaded bars, etc. For more information, please feel free to contact us!

Standard Export Carton: 24 pieces per carton Carton Dimensions: 42.5*29*25.5cm Quantity of 20ft Container: 900 Quantity of 40HQ Container: 2090 Port:Guangzhou/Hongkong

Minimum Order: 1200

Hebei Suna Technology Co., Ltd. was founded in 2002，Our main products includes HPMC, HEMC, RDP, HEC, PVA, CMC, Inorganic Pigment, Titanium Dioxide, and so on. Please contact with me if you are interested in our products. My email is export03@cnsuna.com My Whatsapp is +86 18631102067

Minimum Order: 1 bags

ARE YOU AN INDIVIDUAL BUSINESSMAN OR A BUSINESS ORGANISATION THAT WISHES TO EXPAND IN BUSINESS, WHY NOT SOURCE FOR BG/SBLC FROM KIM SUNGNYON BROKERS WHO HAVE BG/SBLC SPECIFICALLY FOR LEASE AT A LEASING PRICE OF 3+2 OF FACE VALUE ISSUANCE BY HSBC LONDON/HONG KONG OR ANY 25 TOP AA RATED BANK IN EUROPE, MIDDLE EAST OR USA. WE ALSO SECURE FUNDING PROJECT LOANS FOR 3% APR. Finally I will assure you of our total commitment to achieving this transaction as I always look forward to doing more business with you in future. Contact : Mr. Kim Sungnyon
 Email: sungnyon.bgsblc@gmail.com
 Skype ID: kim.sungnyon WhatsApp: ‪+44 7538 334746‬

Double seal. Moistureproof and leakproof. PP material. a box of multipurpose. Easy to carry. Specifications of portable milk powder box Product name Milk powder box Highlights 1. Double-layer sealing is moisture-proof and leak-proof. 2. Built-in scraper accurately controls the quantity. 3, powder spoon separation, portable, clean and sanitary. 4, spoon bottom double hole design, milk powder easily poured out. 5, a box of multipurpose. 5. Food grade safety materials. Model YB-0032, YB-0033 Components milk powder spoon, milk powder fork, partition plate, dust cover, milk powder box body, silicone sealing ring, sealing buckle plate Capacity 360ml, 480ml Instructions for Use 1. Food grade material, BPA free, safe and odor free, and safe storage of all kinds of food 2. High temperature resistance, boiling and steam sterilization What are the symptoms of milk powder unsuitable for babies? 1. Symptoms of digestive tract, the baby may have symptoms such as nausea and vomiting after eating or during eating, and some may have spasmodic pain in gastrointestinal tract and cry. Some may also have diarrhea or dry stool. 2. Skin symptoms. Children are allergic to certain ingredients in milk powder, which may cause skin rash and rough skin, especially around the mouth and anus. 3. The growth and development speed is slow, and some formula milk storage container have insufficient nutrient content or are not suitable for babies. In the process of feeding babies, the growth speed of weight and height is obviously slow. Leave a Message yoboo ensures the safety and health of every baby and mother. The raw materials of the products are selected from BASF PPSU in Germany, and have SGS, FDA, ROHS, CE, ISO and other testing certifications. Yoboojp provides yoboo milk bottle, yoboo feeding bottle, milk powder container for travel, portable milk powder container, anti colic bottle, etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

Rebar couplers are a great way to simplify the design and construction of reinforced concrete. They allow you to connect reinforcement bars of various grades and diameters quickly and reliably. With their parallel-thread system, mechanical splicing solutions can provide fast, high-performance connections that are perfect for any project. 1). The parameter of coupler Size(mm): Φ16-Φ40 O D±0.5(mm): 25-49 Thread(mm): M16.5-M40.2 L±0.5 (mm): 40-95 Pitch(mm): 2.0-3.5 Weight(kg/pc): 0.111-1.085 Thread Angle: 60 Degree 2). The Characteristics of the Usage Standard Model: Used in the occasion for connecting the steel bar in normal situation Different Diameter Model: Used for connecting the steel bar in different diameters Flared Model: Used for the steel bar which was hard to match Positive And Negative Screw Thread Model: Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. Locking Nut Model: Used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.

Minimum Order: 5000

Product Introduction The Acrylic Cushion System consists of multiple coats of flexible acrylic layers, filled with rubber granules for shock absorption and cushioned effect, without disrupting ball bounce. We utilize elastomeric acrylics which reduce hardening of the coatings. This ensures that you will still feel the cushion after many years and resurfacing cycles. Acrylic Tennis Court are acrylic floor coating material and 100% acrylic Sport surfaces Designed to provide consistent speed of play, texture.and vibrant color to any indoor or outdoor facility. Our court surfaces are resistant to fading and withstand a variety of weather conditions from ice and snow to intense heat and ultra-violet rays. The acrylic court systems can be applied on asphalt, concrete, or existing acrylic tennis court surfaces.

Minimum Order: 100

Professional Wear Resistant Polyurethane Sports Flooring Anti-Slip Si-PU system material can be directly installation on concrete, asphalt base, recycle black granular layer, rubber mat. It is researched and development of new materials which is for all kinds of indoor and outdoor sports surface project. It is just to replacement of acrylic and traditional PU material. Particularly durable, professional, environmentally friendly and economical for sports flooring project. SPU is a reinforced, smooth acrylic coating specially formulated for use over asphalt or concrete. It is an all-weather, non-abrasive, textured, multi- purpose athletic surface. An economical and durable alternative to acrylic acid and cushion acrylic system, SPU provides an easily maintain and color intense surface. SPU is ideal for basketball as well as volleyball courts, tennis courts, play areas and multi-sport recreational areas.Silicon PU system is an advanced sport court surfacing system designed to provide players with the highest levels of surface performance for competition and cushioning for safe training.

Minimum Order: 100