Building Glass

Laminated glass is consisting of two or more pieces of glass which are joined together by PVB, EVA or SGP. In the event of breaking, the interlayer keeps the glass bonded together reducing the risk of injury or harm. Longyang laminated glass is normally used when there is a possibility of human impact or where the glass could fall and shatter, such as glass railings, stairs , floors. Besides, laminated glass also has the effect of blocking UV light and sound insulation, so laminated glass is also widely used in IGU glass for curtain walls and windows. Max size 3300x13000mm

Minimum Order: 100

Based on high quality clear float glass, low iron glass and tinted glass, we are offering high quality mirror, and the mirror is with higher reflectance and lasting durability. Main product : Silver mirror, Aluminium mirror, Copper free mirror, Antique mirror. Thickness is from 2mm to 10mm, Max size is 2440*3360mm.

Minimum Order: 100

Tempered glass also called toughened glass. After high-temperature heating and rapid cooling, the strength of the glass is increased. Longyang Glass can offer flat tempered glass and curved tempered glass. Almost all of the glass used in our life is toughened glass products, it makes our life more safe, such as windows and doors, shower door, home appliances, guardrail, greenhouse, solar panel, etc. Thickness 2mm-19mm, max size 3300x12000mm

Minimum Order: 100

Insulating glass consists of two or more pieces of glass sealed around the edges with an air space between. Insulated glass has energy saving, brightness adjustment, sound insulation and other effects, which can make our life more comfortable. Longyang insulated glass using high quality float glass and low-e glass, with aluminum and warm spacers, the glass is widely used for curtain walls and windows. Thickness is 10-70mm, size 300x500-2700*6000mm

Minimum Order: 100

1. Hard coatedlow-e glass Hard coated low-e glass also called on-line low-e glass, is using CVD (chemical vapour deposition) technology put the film coated on the surface of the glass when the glass produced from the float line. Because the film layer is stable, the coated glass can be transported and processed same as normal glass. At the same time, hard low-e glass also has the effect of energy saving, the thermal radiation rate of normal glass is 0.84, the thermal reflectivity is 0.16, the thermal radiation rate of hard low-e glass is 0.17, and the thermal reflectivity is 0.83. Main application areas: doors and Windows, home appliances, such as microwave oven, refrigerator, fresh-keeping cabinet etc. Thickness of the hard low-e glass is from 3mm-12mm. Normal size 2134x3300mm,2440x3300mm,5000x3300. 2. Soft coated low-e glass Soft coated low-e glass also called off-line low-e glass, is using MSVD technology to coat silver film and other metallic compounds on fresh float glass. Longyang glass can provide a wide variety of coated glass according to different regions and different needs, such as high light transmittance (over 80%) with low U-value (1.1), lower light transmittance with low U-value. Thickness is from 3mm to 12mm, size is normal size and jumbo size.

Minimum Order: 100

4mm tempered low iron glass and patterned glass for green house and sun rooms, with high sunlight transmittance above 91%.

Minimum Order: 500

FRP Tray Cable Tray: Durable, Lightweight Design For Industrial Tray-type FRP cable trays are a hybrid, featuring a flat bottom like the trough-type but with shorter or no side walls. These trays offer a middle ground between trough and ladder types. They provide better cable support than ladder types and are easier to clean and maintain than trough types. Suitable for moderate-duty applications, they offer a balance of protection and accessibility but may not be ideal for heavy-duty or highly corrosive environments Hengshui Hongwo Technology Co., Ltd. specializes in producing Tray Type FRP Cable Trays, providing functional and reliable cable management solutions. We focus on creating products that meet the diverse needs of various industries, ensuring efficient cable organization and protection. Made from high-quality fiber-reinforced polymer, our trays offer a perfect balance of durability and weight efficiency. They are designed to accommodate a range of cabling requirements and adapt to different environmental conditions, making them a practical choice for effective cable management. Fiberglass Reinforced Polymer Tray Fiberglass Reinforced Polymer Tray FRP Tray Cable Tray FRP Tray Cable Tray Specification Our product range includes multiple specifications to suit different needs. With options in size, load capacity, and resistance features, our trays are built to maintain quality and performance under various conditions, adhering to stringent industry standards. Length: Our Tray Type FRP Cable Trays are available in lengths from 2 meters to 6 meters, catering to various project scales and accommodating different cable runs. Width: The width of these trays ranges from 100mm to 600mm, ensuring versatility in handling different cable volumes and configurations. Height: The height of the trays is designed between 50mm to 150mm, providing sufficient depth for secure cable placement and protection. Thickness: The thickness of the FRP material varies from 3mm to 5mm, ensuring structural integrity and durability for long-term use. Pressure Ratings: These trays are engineered to withstand pressure ratings from 5 kN/m^2 to 15 kN/m^2, suitable for various industrial applications. Adaptable Temperature Environment: The trays are capable of withstanding temperature ranges from -40°C to 120°C, making them suitable for diverse environmental conditions. Color: Standard colors include grey, black, and white, with options for custom colors to meet specific project requirements or aesthetic preferences. Surface Treatment: Options like anti-static, UV protection, and fire retardant coatings are available, enhancing the tray’s durability and application scope. Customizability: We offer customization in dimensions, colors, and surface treatments to precisely fit the needs of each unique project. Packaging: The trays are packaged securely in materials like wooden pallets or crates, with dimensions and materials adjustable based on customer needs and shipping requirements. These specifications underscore our commitment to delivering versatile and robust Tray Type FRP Cable Trays, tailored to a wide array of industrial cable management needs. Alias And Similar Names FRP Tray Cable Tray: The FRP Tray Cable Tray is known for its robust construction using fiber-reinforced polymer, ideal for durable and lightweight cable support in various industrial environments. This tray type excels in combining material strength with functional design for effective cable management. Fiberglass Reinforced Polymer Tray: Highlighting its material, the Fiberglass Reinforced Polymer Tray Tray offers exceptional corrosion resistance and longevity. It’s a preferred choice for harsh and demanding conditions, ensuring lasting performance in cable organization. Tray-Style FRP Cable Management System: The Tray-Style FRP Cable Management System emphasizes its versatile design, suitable for efficient organization and protection of cables. It’s particularly favored for its adaptability in different industrial settings, providing a practical solution for complex cabling. FRP Cable Support Tray: The FRP Cable Support Tray focuses on its functionality, ensuring secure and orderly cable layout. Its design is tailored for environments requiring high durability and efficient space utilization, making it a reliable choice for extensive cable management. Composite Tray Cable Tray: The Composite Tray Cable Tray combines strength with lightweight features due to its composite build. It’s an ideal option for areas needing a blend of robust construction and ease of installation, offering a versatile approach to cable management. FRP Cable Support Tray Tray-Style FRP Cable Management System Application Of Tray Type FRP Cable Trays Telecommunications and Power Distribution: Ideal for organizing and protecting cables in communication and energy sectors. Construction Industry Use: Suited for the robust demands of construction sites, both indoors and outdoors. Corrosion Resistance for Harsh Environments: Perfect for industrial plants and coastal areas where corrosion is a concern. Chemical and Water Treatment Facilities: Excelling in settings with exposure to corrosive substances. Infrastructure Projects: Reliable for use in bridges, tunnels, and other infrastructure works requiring durability. Versatility Across Industries: Adaptable for diverse needs, ensuring efficient cable management in various environments.

Hengshui Hongwo Technology Co., Ltd. specializes in producing and exporting Reinforced FRP Cable Trays. These trays are designed to provide reliable, efficient cable management solutions for various industries, with a focus on enhanced durability and practicality. Made from high-quality, reinforced fiber- reinforced polymer, they offer extra strength and longevity. Suitable for a broad range of cabling requirements, these trays adapt to different industrial environments, balancing durability with lightness and ease of handling. FRP Cable Tray with Reinforced Construction FRP Cable Tray with Reinforced Construction Heavy-Duty FRP Cable Tray Heavy-Duty FRP Cable Tray Industrial-Grade FRP Cable Tray Industrial-Grade FRP Cable Tray Reinforced Fiberglass Polymer Cable Tray Reinforced Fiberglass Polymer Cable Tray Specification For The Reinforced FRP Cable Tray: Length: Our Reinforced FRP Cable Trays come in lengths ranging from 2 meters to 6 meters, suitable for various installation requirements and project sizes. Width: The width options extend from 100mm to 600mm, allowing for accommodation of different cable volumes, from minimal to extensive cabling setups. Height: The trays have a height range between 50mm to 150mm, providing adequate depth for secure cable placement and layering if needed. Thickness: The reinforced design includes a thickness of 3mm to 5mm, ensuring additional strength and durability for long-term use. Pressure Ratings: Engineered to handle pressure ratings from 5 kN/m^2 to 20 kN/m^2, these trays are robust enough for various industrial applications. Adaptable Temperature Environment: They are capable of withstanding temperatures from -60°C to 120°C, making them versatile for diverse environmental conditions. Color: Standard colors like grey, black, and white are available, with custom color options to match specific project needs or aesthetic choices. Surface Treatment: Options include anti-static, UV protection, and fire retardant treatments, enhancing the tray’s durability and application suitability. Customizability: Dimensions, colors, and surface treatments can be customized to meet the specific requirements of each project. Packaging: Trays are securely packaged, typically in wooden pallets or crates, with packaging dimensions and materials adjustable according to customer preferences and shipping requirements. Main Difference The key difference with the Reinforced FRP Cable Tray is its enhanced durability and load capacity, making it suitable for environments where cables need additional support and protection. Including the Reinforced FRP Cable Tray, let’s compare it with the Trough-Type, Ladder-Type, and Tray-Type FRP Cable Trays: Reinforced FRP Cable Tray: Design: Similar to tray-type but with reinforced construction for added strength and durability. Durability: Enhanced due to the reinforced material, making it more robust against physical impacts and environmental conditions. Load Capacity: Can typically support heavier loads compared to standard FRP trays. Applications: Ideal in environments where extra strength is required, without compromising on the lightweight benefits of FRP. Trough-Type FRP Cable Tray: Design: Features a fully enclosed or semi-enclosed trough, providing excellent protection against dust and debris. Protection: Ideal for environments needing extra protection for cables. Ventilation: Offers less ventilation due to its more enclosed design. Applications: Best in contaminated areas or where cables need to be shielded from external elements. Ladder-Type FRP Cable Tray: Design: Consists of a ladder-like structure with side rails and rungs. Ventilation: Excellent ventilation, suitable for heat-generating cables. Load Capacity: Generally high due to its robust structure. Applications: Common in industrial settings for easy cable access and heat dissipation. Tray-Type FRP Cable Tray: Design: A flat or shallow tray, often with minimal sidewalls. Flexibility: Adaptable for complex routing. Ventilation: Moderate ventilation, more than trough-type but less than ladder- type. Applications: Versatile for commercial and light industrial use. Similar Names Reinforced Fiberglass Polymer Cable Tray: Known for its reinforced structure, the Reinforced Fiber Polymer Cable Tray offers exceptional durability. It’s ideal for settings demanding high strength and resilience, perfectly balancing material robustness with FRP’s inherent lightweight qualities. Heavy-Duty FRP Cable Tray: The Heavy-Duty FRP Cable Tray is recognized for its ability to support heavier loads than standard trays. Its design caters to challenging industrial environments, providing dependable cable support where additional strength is a critical requirement. Enhanced Strength FRP Cable Tray: Emphasizing its upgraded strength, the Enhanced Strength FRP Cable Tray is tailored for areas needing extra support. This tray type excels in environments where both durability and the lightweight nature of FRP are essential for efficient cable management. FRP Cable Tray with Reinforced Construction: Highlighting its construction, the FRP Cable Tray with Reinforced Construction is crafted to offer superior robustness. This design is especially beneficial in settings where physical impacts and strenuous conditions are common, ensuring long-lasting performance. Industrial-Grade FRP Cable Tray: The Industrial-Grade FRP Cable Tray stands out for its suitability in demanding industrial applications. It combines the corrosion resistance of FRP with enhanced structural integrity, making it a reliable choice for complex and heavy-duty cable management needs.

FRP Twisted Septic Tank: Enhanced Design For Reliable Treatment The FRP Twisted Septic Tank is an innovative solution for wastewater treatment, ideal for areas without central sewage. Its unique design is practical and efficient, making it durable and adaptable for both residential and commercial uses in various environments. FRP Twisted Septic Tank is a significant advancement in wastewater treatment technology, standing out with its innovative design and materials. Ideal for areas without centralized sewage facilities, this tank is perfect for both residential and commercial use. Its unique design and advanced construction ensure practicality and efficiency. The tank’s durability and adaptability to different environmental conditions make it a top choice for modern wastewater management solutions. Fiberglass Reinforced Polymer Helical Septic Tank Fiberglass Reinforced Polymer Helical Septic Tank Twist-Design FRP Wastewater Tank Twist-Design FRP Wastewater Tank Overview Structural Excellence: The tank’s unique twisted design is its standout feature, transcending mere aesthetics to provide functional benefits. This structure enhances the tank’s resistance to external forces, ensuring stability and longevity even under challenging conditions. Its interior compartmentalization facilitates efficient sewage treatment through various stages, including settling and digestion, mirroring a comprehensive treatment system. Advanced Materials: Constructed from high-strength fiberglass composite material and reinforced with unsaturated polyester resin, the tank showcases cutting-edge fiberglass winding technology. Its cylindrical shape with a concave-convex wheel-shaped head structure, optimized through ANSYS structural calculation software, speaks volumes of its technological sophistication. The design choices result in a tank that is lightweight yet remarkably strong. Durability and Efficiency: The tank’s durability is a significant advantage, offering high strength, excellent corrosion resistance, and a notable absence of leakage or pollution concerns. Its lightweight nature, compared to traditional concrete septic tanks, adds to its appeal, making installation and transportation more manageable. The material’s corrosion resistance ensures suitability for diverse environmental conditions, enhancing its versatility. Practical Design: With inlet and outlet pipes at both ends and inspection wellheads installed on the body, the tank is designed for ease of use and maintenance. The internal partition plates create compartments, and a circulating flashing device extends sewage retention time, improving treatment effectiveness. Features Cost-Effectiveness and Efficiency: These tanks are produced using industrialized, mechanized, and batch methods, resulting in a small volume with a large effective capacity, which saves on both manufacturing and installation costs. They are also designed for labor and time efficiency, being lightweight, high-strength, and easy to install. Space Saving: The design minimizes the need for extensive land excavation, saving valuable land space. Enhanced Durability: The tank’s twisted design increases strength and resilience, allowing it to better withstand external pressures and environmental stresses compared to standard tanks. Improved Structural Integrity: The twisting pattern not only enhances the tank’s aesthetic appeal but also contributes to its overall stability and integrity, reducing the risk of deformation or damage. Highly Efficient Wastewater Treatment: The tank efficiently processes and treats wastewater, making it suitable for areas without access to municipal sewage systems. Its anaerobic decay capability is notably more effective than traditional septic tanks. Environmentally Friendly: These tanks are environmentally conscientious, with excellent sealing to prevent leakage and pollution. They are also non-corrosive to surrounding flora and infrastructure. Longevity: Constructed from fiberglass, these tanks are resistant to aging, acids, and alkalis, and have a lifespan exceeding 50 years. Superior Pressure and Compressive Strength: Their cylindrical shape and resin sealing greatly enhance compressive strength, offering greater resilience than other shapes. Low Maintenance: Designed for convenience, these tanks require no post- installation management, have long slag cleaning cycles, and are unpowered, eliminating the need for ongoing maintenance. FRP Twisted Septic Tank Specifications Length: Available in various lengths, typically ranging from 1270 mm to 3530 mm, to accommodate different site requirements and installation spaces. Width: The width of these tanks varies, with common sizes ranging from 1000mm to 1800mm, allowing for flexibility in placement and capacity. Height: Tank heights are designed to suit different depth requirements, generally between 1000mm and 1800mm, ensuring efficient underground installation. Thickness: The wall thickness of the tanks is optimized for strength and durability, usually ranging from 4mm to 7mm, depending on the tank size and intended use. Volume: The volume capacity of the tanks varies significantly to suit different user requirements, typically from 1 m³ to 9 m³ or more, making them suitable for a wide range of residential and commercial applications. Number of Users Per Tank: The tanks are designed to cater to a varying number of users, from small households to larger commercial establishments, with capacities suitable for approximately 3 to over 70 users per tank. Customizability: Custom sizes and configurations are available to meet specific project needs, including adjustments in dimensions, inlet/outlet placements, and additional features. Packaging: The tanks are securely packaged for transport, typically using robust materials like wooden pallets or frames, ensuring they arrive in excellent condition. Packaging dimensions and materials can be adjusted based on customer preferences and shipping requirements.

FRP MSC Septic Tanks: Effective Sewage Treatment For Urban And Remote Areas FRP MSC Septic Tanks deliver advanced wastewater management for residential to industrial uses, especially in areas lacking centralized sewage. These corrosion-resistant, leak-proof tanks are suitable for diverse environments, offering reliable, long-lasting sewage treatment and environmental resilience. Hengshui Hongwo Technology Co., Ltd. specializes in the production and export of FRP MSC Septic Tanks, providing advanced wastewater management solutions for a wide range of applications, from residential to industrial. These versatile tanks are highly effective, especially in areas lacking centralized sewage systems, offering reliable sewage treatment and disposal for both urban and remote locations. Made from corrosion-resistant, high-quality materials, they are suitable for various environmental conditions and designed to be leak- proof, preventing surface water contamination. A key feature of these tanks is their durability, demonstrating significant resilience against environmental stresses and ensuring a long-lasting wastewater treatment solution. Fiberglass Reinforced Plastic Septic System Fiberglass Reinforced Plastic Septic System GRP Underground Sewage Tank GRP Underground Sewage Tank SMC(Sheet Molding Compound) is a type of fiberglass reinforced plastic (FRP) material that is widely used in the manufacturing of various composite products, including septic tanks. It is known for its strength, durability, and resistance to environmental factors, making it an ideal material for such applications.These septic tanks are a product of innovative technology, representing a three-format fiberglass septic tank system. They are constructed using unsaturated polyester resin, high-strength glass fiber, and high- performance auxiliary additives. The substrate is sheet molded plastic, formed by a large four-column hydraulic press. This approach results in a cylindrical structure, comprising an upper cover and a lower bottom, sealed with a sealant strip and secured with bolts. This design is not only efficient but also simplifies the installation process. The multi-layer composite structure of these tanks significantly enhances their strength and extends their service life. This feature is pivotal in providing a robust solution for long-term wastewater management. Innovative Three-Format Structure The SMC Septic Tank is ingeniously designed, comprising three interconnected sealed tanks, each partitioned to optimize the treatment process. The volume ratio of these tanks is carefully calculated as 2:1:3. This design ensuring that wastewater is processed effectively and efficiently. SMC Septic Tank Structure Efficient Wastewater Treatment Process Wastewater management in these tanks involves a multi-stage process: Fecal Processing in the Middle Layer: The feces enter the first tank through the inlet pipe. Here, the initial breakdown of organic matter begins, setting the stage for more detailed treatment in the subsequent tanks. Precipitation of Insect Eggs: This stage involves the settling down of heavier particles, including insect eggs, which are a common concern in wastewater. Facultative Anaerobic Fermentation: In this stage, the organic matter undergoes fermentation. The facultative anaerobic process ensures that even in the absence of oxygen, the breakdown of waste continues effectively. Organic Matter Explanation and Degradation Products: The final stage involves the degradation of organic matter into simpler, non-harmful components. The by- products of this degradation process also contribute to the killing of pathogens, ensuring that the effluent reaching the final stage is harmless. Reaching Harmless Treatment Standards: After undergoing these comprehensive treatment stages within the septic tank, the feces are effectively rendered harmless. This process not only meets but often exceeds environmental and health standards, ensuring that the output has minimal impact on the surrounding ecosystem. Features Leak-Proof and Durable Material: Fiberglass septic tanks are crafted from high- strength, acid and alkali-resistant polymer materials like synthetic resin and glass fiber, ensuring durability and safety. These tanks are molded with high- strength mechanical techniques to prevent leakage and withstand harsh conditions. Efficient and Harmless Treatment: With excellent sealing and a staggered partition design, these tanks facilitate smooth substrate transfer and extended fermentation time, resulting in effective anaerobic decay. This design enhances the sewage treatment capacity, outperforming traditional septic tanks in efficiency. Environmentally Friendly: These tanks are produced integrally, ensuring no leakage or environmental pollution. The design protects the surrounding environment, including flora, and effectively kills parasitic eggs and bacteria. The resulting organic fertilizer is harmless and environmentally sustainable. Space-Saving and Flexible Installation: The compact structure of these tanks requires about 60% less space than traditional septic tanks, offering flexibility in site selection and practicality in saving land resources. Labor-Saving: The design and operation of these tanks save on manpower and resources, reducing the need for technical guidance. This makes them a cost- effective and efficient option for waste management. Low Maintenance: Fiberglass septic tanks require minimal maintenance and no specialized management, with a recommended cleaning cycle of every 5 to 9 months, thus saving on long-term operational costs. High Cost-Effectiveness: Produced in a factory setting through batch and mechanized processes, these tanks use new materials and processes to offer a small size with a large effective volume. This makes them economically viable and highly endorsed by health departments. Convenient Installation: Designed for modular production, these tanks are easy to transport. The installation process is straightforward, involving quick connection of the upper cover and bottom plate with screws. They can be installed and operational on the same day, making them convenient for various construction sites.

SMC FRP Water Tank: Multipurpose Storage For All Water Types SMC Water Tanks, made from fiberglass reinforced plastics, are modular, lightweight, rustproof, and durable. Ideal for hotels, schools, hospitals, and mines, they offer on-site assembly with capacities from 0.125m³ to 125,000m³, suiting various needs. Hengshui Hongwo Technology Co., Ltd. is a producer and exporter of FRP MSC Septic Tanks and SMC Water Tanks, offering advanced wastewater management and water storage solutions for applications ranging from residential to industrial. The SMC Water Tanks, made of fiberglass reinforced plastics, are available in modular and combination types. They are lightweight, rust- resistant, non-leaking, durable, and easy to clean, making them ideal for hotels, schools, hospitals, and coal mines. These tanks can be assembled on- site, with capacities ranging from 0.125m³ to 125,000m³, catering to various needs. Constructed from corrosion-resistant materials, water tanks are designed to be leak-proof, suitable for different environmental conditions, and durable against environmental stresses. They are versatile for storing drinking water, irrigation, fire suppression, and industrial water storage. Our products undergo rigorous testing to meet international water storage standards, ensuring safety and reliability. Additionally, both FRP/GRP SMC Water Tanks and FRP MSC Septic Tanks are designed for easy installation and low maintenance, providing user-friendly solutions for long-term use. Fiberglass Reinforced Plastic (FRP) Water Tank Fiberglass Reinforced Plastic (FRP) Water Tank Composite Water Storage Tank Composite Water Storage Tank Fiberglass Sectional Water Tank Fiberglass Sectional Water Tank MSC Panel Water Tank MSC Panel Water Tank Characteristics Of SMC Water Tank Modern and Advanced Design: The SMC water tank represents a new, globally adopted type, constructed entirely from high-quality SMC (Sheet Molding Compound) plates. This modern design approach ensures robustness and effectiveness. Safe and Clean Water Storage: Utilizing food-grade resin, the tank ensures that the water stored is clean and free from pollutants. This makes it ideal for storing drinking water, as it maintains the purity and safety of the water. Durable and Aesthetically Pleasing: Characterized by high strength and light weight, the SMC water tank is corrosion-resistant, enhancing its longevity. Its pleasing appearance adds an aesthetic value, and it requires minimal maintenance, further extending its life. Versatile Usage: The tank is extremely versatile, finding applications in various sectors including mining, public institutions, residential areas, and hotels. It serves as a reliable storage solution for not just drinking water, but also for sewage water for treatment, fire extinguishing water, and other types of water storage needs.

FRP Fiberglass Marker Piles: Essential For Underground Infrastructure Projects Hengshui Hongwo Technology Co., Ltd. specializes in producing and exporting FRP/GRP Marker Piles, offering reliable and innovative solutions for diverse marking and signage needs. Made from Fiber Reinforced Polymer/Glass Reinforced Polymer, these marker piles are both durable and lightweight. FRP/GRP Marker Piles available in various sizes and colors, they are designed to suit different requirements. Ideal for uses such as roadside markers, agricultural boundary markers, hiking trail markers, and utility line indicators, they are also useful on construction sites and for delineating protected areas. Our commitment is to provide versatile, long-lasting, and efficient FRP/GRP Marker Piles for a variety of marking and signaling purposes across multiple sectors. Fiberglass Marker Post Fiberglass Marker Post FRP Marker Post FRP Marker Post Fiberglass marker piles are manufactured using FRP extruded profiles, combining fiberglass and related products as reinforcing materials and synthetic resin as the matrix. They are produced through a one-time extrusion process using a fiberglass extrusion machine, followed by high-temperature pressing. These piles are impact, wear, high-temperature, and corrosion-resistant, capable of withstanding various substances including water, gasoline, alcohol, electrolytic salts, acetic acid, hydrochloric acid, sodium potassium compounds, and urine, as well as asphalt. This makes them suitable for a wide range of acidic and alkaline soil conditions. With a service life of up to 30 years and content marked using screen printing technology, they provide an effective warning signal and require no maintenance. Additionally, their lightweight design facilitates easy transportation and installation. Their lack of recycling value also naturally deters theft. FRP Marker Piles Product Features Vibrant and Durable Color: These marker piles boast bright, unfading colors that maintain a strong warning effect over time, ensuring high visibility in various settings. Resilient in All Environments: Designed to resist corrosion and aging, these marker piles guarantee safe and reliable use in any environmental condition, enhancing their versatility. Theft Deterrent: Made from a synthetic material with no recycling value, these marker piles inherently deter theft, adding an extra layer of security. Ease of Installation: Their lightweight nature makes these piles easy to install, significantly reducing labor efforts and streamlining the installation process. Durability and Impact Resistance: Boasting high strength and impact resistance, these marker piles are built to last, with a service life ranging from 30 to 50 years, ensuring long-term reliability. Applications Of FRP Fiberglass Marker Piles Pipeline Identification: These marker piles are crucial in identifying and marking the locations of underground pipelines, aiding in maintenance and preventing accidental damage during excavation. Natural Gas Lines: They play a vital role in marking natural gas lines, ensuring safety and aiding in quick identification during repairs or emergencies. Water Supply Systems: Essential for water supply systems, these piles help in locating water conduits, crucial for both maintenance and emergency access. Communication Infrastructure: Widely used in marking underground communication lines like fiber optics and cables, facilitating easy identification for service and upgrades. Sewage and Drainage Networks: They mark sewage and drainage lines, helping in efficient management and maintenance of municipal and industrial wastewater systems. Petrochemical Facilities: In the petrochemical industry, these marker piles are used to indicate pipeline routes, aiding in operational safety and infrastructure management. Mining Operations: Vital in mining operations, these piles help mark underground utilities and structures, enhancing safety and operational efficiency. General Construction and Civil Engineering: They are also broadly used in various construction and civil engineering projects to denote underground utilities, preventing accidental damages and facilitating project management. Alias FRP Marker Post: The FRP Marker Post is known for its durability and corrosion resistance, making it an ideal choice for marking underground utilities. Its Fiber Reinforced Polymer construction ensures long-lasting visibility and sturdiness in various environments. Fiberglass Marker Post: Emphasizing its material composition, the Fiberglass Marker Post stands out for its lightweight yet robust nature. It’s particularly suitable for easily marking locations like pipelines and cable routes, offering clear visibility and easy installation. FRP Sign Pile: The FRP Sign Pile is recognized for its multifunctional use in signage applications. Made from Fiber Reinforced Polymer, it provides a reliable and weather-resistant solution for effectively marking and identifying crucial underground infrastructures. Each of these names highlights a different aspect of the FRP/GRP Marker Pile, demonstrating its versatility and suitability for various marking and identification needs in construction and utility sectors. FRP Utility Marker: The FRP Utility Marker, crafted from Fiber Reinforced Polymer, is designed for high visibility and resilience. Ideal for long-term marking of utilities, it withstands environmental elements effectively, ensuring reliable location identification. Glass Fiber Reinforced Marker Stake: As a Glass Fiber Reinforced Marker Stake, it combines strength with minimal weight. This stake is perfect for demarcating areas in construction and utility fields, offering ease of handling and durability against physical and chemical elements. FRP Underground Service Marker: The FRP Underground Service Marker is tailored for clear demarcation of underground services. Its robust FRP build provides lasting performance in marking subterranean utilities like gas lines and water pipes, crucial for maintenance and safety. GRP Ground Marker Post: The GRP Ground Marker Post, made from Glass Reinforced Polymer, stands as a sturdy solution for ground marking. Its composition ensures it remains unaffected by corrosion and wear, ideal for outdoor applications in various industrial settings. Fiberglass Reinforced Utility Signpost: The Fiberglass Reinforced Utility Signpost is distinguished by its versatile application in utility signaling. Its fiberglass reinforcement offers an optimal blend of visibility and weather resistance, essential for outdoor marking tasks.

Ladder-Style FRP Cable Tray: Enhanced Ventilation And Installation Efficiency This type features a distinctive rung design, similar to a ladder, providing robust support while allowing for better air circulation and easy access for cable installation and maintenance. Ladder-type trays are preferred in settings where heat dissipation is crucial, such as in high-power applications. Their open design allows for easy access but offers less protection from environmental factors compared to trough-type trays. They strike a balance between ease of access and cable support, making them versatile for various installations. Hengshui Hongwo Technology Co., Ltd. specializes in manufacturing and exporting Ladder-type FRP Cable Trays. Designed for reliability and efficiency in diverse industrial environments, our trays balance strength and lightness, using high- quality fiber-reinforced polymer. They are ideal for settings requiring corrosion resistance and durability. Our goal is to provide effective, resilient cable management solutions with our Ladder-type FRP Cable Trays. Specification For The Ladder-Type FRP Cable Tray These specifications demonstrate our commitment to providing versatile, durable, and tailored Ladder-type FRP Cable Tray solutions to meet a wide range of industrial cable management needs. Length: Our Ladder-type FRP Cable Trays come in a range of lengths, typically from 2 meters to 6 meters, accommodating various project scales and layout requirements. Width and Height. The width, as previously discussed, is the horizontal dimension across the top opening of the tray where the cables are placed. The height, on the other hand, refers to the vertical depth of the tray. When you see a dimension specification like Width x Height (e.g., 500mm x 100mm), it means: Width (First Number, e.g., 500mm): This is the horizontal measurement of the tray from one side to the other, indicating how much space is available for laying cables side by side. Height (Second Number, e.g., 100mm): This is the vertical measurement from the base of the tray to the top edge. The height of the tray is important because it determines how much vertical space is available for the cables. A greater height can accommodate larger cables or a larger bundle of cables. The Width x Height dimensions of a Ladder-type FRP Cable Tray describe both how wide the tray is (how many cables it can hold side by side) and how deep it is (how large the cables or bundles of cables can be). This combination of width and height ensures that the cable tray can efficiently accommodate the specific cable management needs of a project. Weight: Small Dimensions: Trays measuring 100mm in width and 3mm in thickness weigh about 4 to 6 kg per meter. Medium Dimensions: Medium-sized trays, approximately 300mm wide and 4mm thick, range from 8 to 12 kg per meter. Large Dimensions: Larger trays, 600mm wide and 5mm thick, vary between 14 and 20 kg per meter. Thickness: The thickness of the FRP material is designed for durability and strength, ranging from 3mm to 5mm. This ensures robustness while maintaining a lightweight structure. Pressure Ratings: These cable trays are engineered to withstand varying pressure levels, with ratings typically between 5 kN/m^2 to 15 kN/m^2, catering to different environmental and operational stresses. Color: A variety of color options are available, including standard industrial shades such as grey, black, and white. Custom colors can be provided to meet specific aesthetic or coding requirements. Surface Treatment: The trays undergo surface treatments for enhanced durability and corrosion resistance, with options including anti-static, UV protection, and fire retardant coatings. Customizability: We offer high customizability in dimensions, colors, and surface treatments to meet specific project requirements, ensuring each tray is tailored to its intended application. Packaging: The trays are securely packaged for transportation, typically using sturdy materials like wooden pallets or crates, ensuring they arrive in excellent condition. Packaging dimensions and materials can be adjusted according to customer needs and shipping requirements.

FRP Trough Cable Tray For Heavy-Duty Cable Management Trough-type FRP cable trays are designed with a solid bottom and encased sides. They offer excellent protection for cables from dust, debris, and external elements. Ideal for environments where cable protection is paramount, these trays are often used indoors or in areas with a lot of particulate matter. However, they may not be as suitable for areas requiring rapid heat dissipation or where cable ventilation is a concern. Compared to other types, they offer superior protection but may be heavier and harder to inspect or maintain. Trough-type FRP cable tray is a cable tray with a trough-like shape made from fiberglass reinforced plastic, combining the benefits of a specific design with the advantages of a particular material. This combination makes it ideal for various applications where cable protection and durability are essential. Trough-type FRP (Fiberglass Reinforced Plastic) cable trays come in various specifications, sizes, thicknesses, and weights. Common Specifications Material: Made from Fiberglass Reinforced Plastic, offering high strength, durability, and corrosion resistance. Type: Trough or U-shaped design, providing a secure and accessible channel for cables. This term refers to the shape and design of the cable tray. The “trough” in trough-type indicates that the cable tray has a U-shaped profile, resembling a trough. This design is effective for securely holding and protecting cables, providing a contained route for cable management. The trough shape also allows for easy laying of cables and simplifies maintenance and inspection, as the cables are easily accessible. Load Capacity: Varies depending on the size and design, but typically designed to support a significant weight of cables over long spans. a)Light Duty: Up to 50 kg/meter (for small cables and light installations). b)Medium Duty: Between 50 kg/meter and 100 kg/meter (suitable for most commercial and industrial applications). c)Heavy Duty: Over 100 kg/meter (for large cables and high-density cable layouts). Fire Retardancy: Often designed to be self-extinguishing or have a low fire hazard rating. Rating: Commonly classified as self-extinguishing. They may have a fire performance rating like UL 94-V0, indicating that they stop burning within 10 seconds after the removal of the flame source. Smoke Emission: Low smoke emission in case of fire, which is crucial for safety in enclosed spaces. Temperature Range: Suitable for a wide range of temperatures, maintaining integrity in both hot and cold environments. Operating Temperature: Typically from -40°C to +120°C (-40°F to +248°F). This range can vary, especially if special additives are used for enhanced thermal stability. Resistance: High resistance to chemical corrosion, moisture, and UV radiation. Chemical Resistance: Resistant to a wide range of chemicals, including acids, alkalis, and solvents. Moisture Resistance: Highly resistant to water and humidity, making them suitable for outdoor or damp environments. UV Resistance: Often treated for UV stability, especially in outdoor applications. Width: Commonly available in widths ranging from 50 mm to 600 mm. Length: Standard lengths are usually 3 meters or 6 meters, but can be customized. Depth: The depth of the trough can vary, typically between 50 mm to 200 mm. Wall Thickness: Generally ranges from 2.5 mm to 5 mm, depending on the tray’s size and the load requirements. Weight: The weight of FRP cable trays is much lighter compared to metallic options, making them easier to handle and install. The specific weight will depend on the size and thickness of the tray. Color: Usually grey, black, or as per the customer’s requirement. Accessories: Including connectors, bends, reducers, and supports for versatile installation options. Mounting Options: Can be mounted on walls, ceilings, or supported by floor stands. Customization: offer custom sizes and configurations to meet specific project requirements. Alias And Similar Names FRP Trough Cable Tray: The FRP Trough Cable Tray is known for its high strength and corrosion resistance, making it ideal for heavy-duty cable management in industrial environments. Its trough design provides excellent protection for cables, especially in harsh chemical or wet conditions. Fiberglass Reinforced Trough Tray: Emphasizing its material composition, the Fiberglass Reinforced Trough Tray is lauded for its lightweight yet durable nature. This tray is especially suitable for installations where weight is a concern, yet robust support for cables is needed. Trough-Style Composite Cable Tray: Highlighting its composite construction, the Trough-Style Composite Cable Tray combines various materials to achieve superior durability and insulation properties. It’s a top choice for electrical installations requiring both high load capacity and electrical insulation. FRP Channel Cable Tray: The FRP Channel Cable Tray, while similar in material to the others, distinguishes itself with its channel-like design that facilitates easy cable laying and maintenance. It’s particularly favored in settings where frequent cable changes or inspections are anticipated. Corrosion-Resistant Trough Cable Tray: Focusing on its resistance to corrosive environments, the Corrosion-Resistant Trough Cable Tray is ideal for use in chemical plants, wastewater treatment facilities, and other harsh settings. Its construction ensures longevity even in the most challenging conditions.