Environment & Recycling - Others

Product Description The Floating Trash And Debris Oil Containment boom is a reliable containment option for any location dealing with unwanted trash, debris, seaweed or aquatic plants. Made from a marine grade PVC, these barriers are designed to float continuously in the water to block, contain or capture debris. Their high strength and easy setup has made them a favorite for power plants, homeowners, golf courses and other companies looking to contain or control materials. Similar to other floating barriers, trash booms are constructed in calm water, moving water and open water models. This allows them to match the specific conditions and containment requirements of individual sites. Product Applications The Floating Trash And Debris Oil Containment boom has been used for both long term and short term deploymentand is ideal for small timbers, litter, trash and debris. Its durable exterior has equipped the boom for use in any of the following applications: -Floating Plastic, Wrappers, Cups and Trash -Golf Balls -Seaweed Barriers/Control -Large Particles or Timbers -Leaves and Branches -Aquatic Plants -Tsunami, Hurricane or Marine Debris Containment TECHNICAL SPECIFICATION Model JXYFDB103 Total Height 480mm Freeboard 180mm Draft 300mm Section Length 15m/20m/25m/30m Fabric PVC End Connector ASTM Z

Minimum Order: 100

Product Introduction Oil containment booms are high strength floating barriers used during the containment and cleanup of oil in calm water, moving water and open water areas. Made with marine grade components and oil rated fabrics, booms are able to float in the water and contain oil while spill recovery is underway. Product Features • Boom Construction: Reinforced PVC • Top Foam Floats Available in Varying Sizes • Tension Cables for Moving Water Locations • Marine Grade End and Section Connectors Techincal Data Model:JXY-WGV600,JXY-WGV700,JXY-WG , V750,JXY-WGV800,JXY-WGV900,JXY-WGV1000,JXY- WGV , 1100,JXY-WGV1500 Overall Height(mm) 600,700,750,800,900,1000,1100,1500 Freeboar , d(mm) 150,210,260,280,320,340,270,520 Draft(mm) 380,390,400,420,490,540,560,760 Length Per Section(m) 20 Max,working Tensile Strength(KN) 20,25,30,45,55,75,85,130 Max, wave Height to withstand(m) 0.5,0.5,1,1.5,1.8,2,2,3 Max, wind Speed to Withstand(m/s) 8,10,10,15,15,18,20,20 Max, current Speed to Withstand(Kn) 1,1,1.5,1.5,2,2.5,2.5,3 Packing dimensions for 20m 1*1*0.6,1.2*1*1,1.2*1*1,1.3*1.1*1.1,1.4*1.5 , *1.2,1.4*1.6*1.3,1.4*1.7*1.4,1.6*1.9 *1.8 Note: The technical data are subject to change without notice due to modifications to the product and shall be confirmed by the manufacture and the customer.

Minimum Order: 100

Supplier's best contact (sales manager:Leonia) Sales manager : Leonia RFQ E-mail : sales11@amikon.cn Skype/WeChat : 18030175807 Mobile/Whatsapp : +86 18030175807 QQ: 2851195482 Product description Market Facing Number:MVI56E-MCMR Manufacturer:Allen-Bradley Rockwell Country of origin:USA Condition: Brand new Warranty: 360 days Payment: T/T Price: Request quote Delivery time: In Stock Supplier's best contact (sales manager:Leonia) Sales manager : Leonia RFQ E-mail : sales11@amikon.cn Skype/WeChat : 18030175807 Mobile/Whatsapp : +86 18030175807 QQ: 2851195482 Amikon Automation Limited have over 10 years of experience with automatic control spare part.This experience allows us to deliver quality products . We can support “hard to get” or “out of stock” products. There are many Allen-Bradley related Rockwell 100-B600ND3 SER. B CONTACTOR 110/120V Rockwell 1326AB-B430E-21 SER. C NSMP Rockwell 1326AB-B520E-M2L SER. B REMAN Rockwell 1326AB-B520E-S2L SER. B NSFS Rockwell 1326AB-C2E-11-C5-X069 SERVO MOTOR 5.2 KW 3000 RPM Rockwell 1336-B003-EAD-FA2-S1 SER.A REMAN Rockwell 1336-B007-EAD-S1 SER. A AC DRIVE Rockwell 1336-B010S-ECD-L3-RP3 SER.A NSMP Rockwell 1336-BDB-SP20D SER. C Rockwell 1336F-B020-AA-EN-HAS2-LA1-L6 SER. A NSNP Rockwell 1336F-B020-AA-EN-HAS2-LA2-LA3-L4 SER.A DRIVE Rockwell 1336F-BRF200-AN-EN SER. A NSMP Rockwell 1336S-B010-AA-EN-HA2-L6 SER. D REMAN Rockwell 1336S-B020-AN-EN3-HA1-L6 SER. D REMANUFACTURED Rockwell 1336S-B020-AN-EN4-HAP-L5 SER. D Rockwell 1336S-B020-AN-EV4-GM1-HA2-L6D SER. D Rockwell 1336VT-B010-EAN-FA2-L1-S1 SER. A UNMP Supplier's best contact (sales manager:Leonia) Sales manager : Leonia RFQ E-mail : sales11@amikon.cn Skype/WeChat : 18030175807 Mobile/Whatsapp : +86 18030175807 QQ: 2851195482

Minimum Order: 1 bags

Hebei Ou Tai Environmental Protection Equipment Co., Ltd. is a dust collection system manufacturer. We use the advanced manufacturing equipment, extraordinary manufacturing technology, and strict first-class assurance device beneath the education of users to grant excellent industrial dust collection systems of our products. We are one of the professional pps filter bags manufacturers. We only provide high-quality pps filter bags for customers. PPS Filter Felt Bag description: Material: Polyphenylene sulfide (PPS) Common industries and conditions: for coal-fired boilers, waste incineration, metal smelting, chemical industry and other low-flue gas dust collection. Remarks: poor oxidation resistance, strong acid, and alkali resistance. Material: Polyphenylene sulfide (PPS) Weight 550m² thickness 2.0mm Air permeability ＞12m³/m²·min Longitudinal pull ＞900N/5×20cm Latitudinal tension ＞1100N/5×20cm Longitudinal extension ＜25℅ Zonal elongation ＜45％ Operating temperature 160℃-190℃ Post-processing PTFE

Minimum Order: 1 bags

P84 High-Temperature Dust Bag description: The p84 filter bags are high temperature dust collector bags. Material: Polyimide (P84) Common industries and conditions: for chemical, metal smelting, waste incineration, cement kiln tail, coal-fired boilers and other moderate corrosion of flue gas dust collection. Note: excellent short-term high-temperature ability. Material: Polyimide (P84) Weight 500m² thickness 2.0mm Air permeability ＞14m³/m²·min Longitudinal pull ＞800N/5×20cm Latitudinal tension ＞1200N/5×20cm Longitudinal extension ＜35℅ Zonal elongation ＜55％ Operating temperature 260℃ Post-processing Singeing Hebei Ou Tai Environmental Protection Equipment Co., Ltd. Is a dust collector manufacturer. We use the advanced manufacturing equipment, extraordinary manufacturing technology, and strict first-class assurance device beneath the education of users to grant excellent industrial dust collection systems of our products.

Minimum Order: 1 bags

High temperature fiberglass filter bag The glass fiber continuous filter cloth is composed of continuous glass fiber yarns for both warp and weft yarns. The specially processed and manufactured glass fiber fabric is an ideal high-temperature resistant filter material. The filter material has strong strength, smooth surface, and easy to peel off dust. Temperature can be used at 280 degrees for a long time, corrosion resistance, high dust removal efficiency. Widely used in carbon black / iron / cement / calcium carbide / electrochemical / steel and other industries. High Temperature fiberglass filter bag performance: Good heat resistance, long-term use below 280°C; Good dust stripping, so that the energy consumption of cleaning is low; Good dimensional stability, the shrinkage of the fiber itself is zero at the use temperature; Good resistance to chemical attack, except hydrofluoric acid, strong acid, and strong alkali, it is stable to other media; No water absorption, no moisture absorption; The filtration efficiency can reach 99.5% or more. Hebei Ou Tai Environmental Protection Equipment Co., Ltd. Is a dust collection system manufacturer. We use the advanced manufacturing equipment, extraordinary manufacturing technology, and strict first-class assurance device beneath the education of users to grant excellent industrial dust collection systems of our products.

Minimum Order: 1 bags

Dust removal frame, also known as dust bag cage, is an indispensable accessory for bag filter, used as a frame of bag supporting cages. It can be compatible with six, eight, ten, twelve, sixteen, eighteen, two Ten or twenty-four tendons. The skeleton is the "rib" of the filter bag cages, and it is formed by a special welding equipment. Dust collector bags and cages are widely used in metallurgy, chemical industry, coking, power generation, non-ferrous metallurgy, steel, building materials, coal mines and other industries. We are one of the filter bag cage manufacturers that can provide services of bag filter design. The characteristics of filter bag cage: Firm welding: a smooth and straight appearance so that the filter bag is not damaged, the application is lightweight, easy to install and maintain, and the surface post-treatment process is electroplating or organic silicon processing. Raw materials: high-quality low carbon steel wire, galvanized steel wire, stainless steel wire, etc. Specifications: round, oval, flat, envelope type, trapezoidal, star, spring type and so on. Structure: There are multi-section type, text type tube, protection short tube, unloading type, insert type and other reasonable structure. Influencing factors of filter bag cage: Effect of dust removal frame size: In the geometry of the dust removal frame, the diameter of the dust removal frame, the gas inlet, and the shape and size of the exhaust pipe are the most important influencing factors. The influence of gas parameters on the performance of the dust removal framework: including the influence of gas flow rate, the influence of gas dust concentration, the influence of gas moisture content, the influence of gas density, viscosity, pressure, and temperature. The effect of physical properties of dust on the dust removal framework. The effect of dust on the inner wall roughness of the framework: Concentration of dust particles near the wall surface will cause swirling due to the rough surface, causing some dust particles to be thrown into the rising air stream and entering the exhaust pipe, which reduces the dust removal efficiency. Baghouse filter cages production standard: The cage-type dust removal frame requires a uniform distribution of supporting rings and longitudinal bars, and should have sufficient strength and rigidity to withstand the gas pressure of the filter bag in the state of filtering and cleaning, and can prevent the normal transportation and installation process from occurring. Damage and deformation caused by impact and impact. Filter bag skeleton all welding points should be welded firmly does not allow off welding, welding and missed welding. The surface of the filter bag frame and the filter bag should be smooth and smooth, do not allow welding, uneven and burr. The tension spring type skeleton should have enough turns and elasticity, and the distance should be uniform after pulling open. The surface of the filter bag skeleton must be treated with anti-corrosion, according to different needs of the plating, spray or paint, such as for high temperature, the corrosion should be clear to meet the use of temperature requirements. Dust bag cage verticality 6M positive and negative 1mm. Dust bag cage has an integral, sub-section of two or three sections. Dust bag cage length of more than 3 meters wearing a steel molding pipe. Dust bag cage galvanized, spray, silicone processing. Hebei Ou Tai Environmental Protection Equipment Co., Ltd. Is a dust collection system manufacturer. We use the advanced manufacturing equipment, extraordinary manufacturing technology, and strict first-class assurance device beneath the education of users to grant excellent industrial dust collection systems of our products.

Minimum Order: 1 bags

Dust collector bag is the heart of a bag filter and is generally called a filter dust bag, dust collection bag. The dust collector bag is a key part of the operation of the bag filter. Usually, the air filter bag is suspended vertically in the dust collector. It is a dust removal device that uses a bag filter element made of a fiber braid to trap solid particles in a dust- containing gas. The principle of action is that the dust particles are intercepted by the collision of the fibers with the inertial force of the filter cloth fibers. The industrial dust collector bags is suitable for capturing fine, dry non- fibrous dust. The cloth dust collector bags are made of textile filter cloth or non-woven felt. It uses the filtering action of the fiber fabric to filter the dust-laden gas. When the dust-laden gas enters the bag filter, the dust with large particles and large gravity settles due to gravity. When it falls down into the ash hopper and the gas containing fine dust passes through the filter, the dust is trapped and the gas is purified. If you are looking for dust collector filter bags manufacturer in China, Senotay is your best choice. We can provide you with dust collector bag replacement services. Hebei Ou Tai Environmental Protection Equipment Co., Ltd. Is a dust collector manufacturer. We use the advanced manufacturing equipment, extraordinary manufacturing technology, and strict first-class assurance device beneath the education of users to grant excellent industrial dust collection systems of our products.

Minimum Order: 1 bags

DMF-Z Right Angle Electromagnetic Pulse Valve Product introduction: The electromagnetic pulse valve is imported from abroad (also known as the diaphragm valve) is the compressed air "switch" of the pulse bag filter dust cleaning system is controlled by the output signal of the pulse injection controller, and the filter bag is cleaned by the row (chamber). Ash, so that the dust collector's resistance is maintained within the set range, in order to ensure that the dust collector processing capacity and vacuum efficiency. DMF-Z Right Angle Electromagnetic Pulse Valve Features: The DMF-Z electromagnetic pulse valve is a right-angle valve. The angle between the inlet and outlet is 90°. It is suitable for the mounting connection between the helium cylinder and the dust blower tube. The gas flow is unobstructed, and it can provide the turbulent gas flow that meets the requirements. DMF-Z Right Angle Electromagnetic Pulse Valve working principle: The diaphragm divides the electromagnetic pulse valve into two air chambers, front and rear. When the compressed air is turned on, the compressed air enters the rear air chamber through the throttle hole. At this time, the pressure of the air chamber presses the diaphragm against the output of the valve. The pulse valve is in the "closed" state. The electric signal of the pulse injection controller causes the electromagnetic pulse valve armature to move, the air chamber vent hole opens after the valve, the rear chamber quickly loses pressure, the diaphragm moves back, the compressed air is blown through the valve outlet, and the electromagnetic pulse valve is "opened" status. Pulse injection control instrument electrical signal disappeared, electromagnetic pulse valve armature reset, after the air chamber vent hole closed, the rear chamber pressure increased so that the diaphragm close to the valve output, the electromagnetic pulse valve is in the "closed" state. Hebei Ou Tai Environmental Protection Equipment Co., Ltd. Is a dust collection system manufacturer. We use the advanced manufacturing equipment, extraordinary manufacturing technology, and strict first-class assurance device beneath the education of users to grant excellent industrial dust collection systems of our products. If you are looking for pulse valve manufacturers, Senotay can be a competitable one among those diaphragm valve suppliers. Contact us to get more information about our products!

Minimum Order: 1 bags

Anti-static dust bag is currently ideal dust filter material, with good ventilation energy, high dust removal efficiency, and a certain degree of acid, alkali and heat resistance, weaving process uses a multilateral brushing, increased fabric thickness, elasticity, so the dust removal effect is good, the dust removal rate of the anti static filter bag can reach 99.99%. The above two products have been widely used in petroleum, chemical, metallurgy, mining, cement and environmental protection dust removal and other industries. In addition to the process of producing a normal needle felt, the production of a polyester anti-electrostatic dust bag also requires the incorporation of conductive fiber yarns in warp yarns of base fabrics for the production of needle felts or the incorporation of conductive fibers and the like in chemical fibers. After the (ie explosion limit) in the event of static discharge sparks or external ignition and other factors, can easily lead to explosions and fires. Such as dust, chemical dust, coal dust, etc. In case of electrostatic discharge may have an explosion. In the field of bag dust collection, such dust is needed. Polyester Needle Filter Mat Material: Polyester Weight 500m² thickness 1.8mm Air permeability ＞8-12m³/m²·min Longitudinal pull ＞900N/5×20cm Latitudinal tension ＞1500N/5×20cm Longitudinal extension ＜25℅ Zonal elongation ＜45％ Operating temperature 150℃ Post-processing Singeing and calendering Hebei Ou Tai Environmental Protection Equipment Co., Ltd. Is a dust collection system manufacturer. We use the advanced manufacturing equipment, extraordinary manufacturing technology, and strict first-class assurance device beneath the education of users to grant excellent industrial dust collection systems of our products.

Minimum Order: 1 bags