Measuring & Analyzing Instruments - Others

ST136 pellet durability Index tester (pellet particle pulverization rate tester) is a special instrument for testing PDI value of pellet feed.The pellet pellet produced by the pellet factory must have enough durability to withstand the impact of the transportation process, reduce the fine powder, and meet the customer's appearance requirements for the pellet feed. PDI tester Pellet durability Index tester is one of the most important indicators to reflect the quality of pellet feed. It is used to measure the relative ability of pellet crushing resistance in the process of conveying and handling of pellet pellet products The higher the PDI value, the stronger the crushing resistance, the better the particle quality and the higher the pellet utilization.

Universal internal Bluetooth twelve sensors Tire pressure monitoring system for Passenger car 2.4Ghz Specifications LCD pannel,with extra Micro USB port for charging. Real-time Monitor the tempreature and pressure with high degree accuracy RF wireless technology,can auto-alarm,when tire pressure and temperature is abnormal. Support tire position exchange function. With Freescale Chip and RENATA anti-explosion battery. Real-time Wireless Car Tire Pressure Monitoring System Solar External Internal Universal TPMS Hot sale bluetooth external tpms tire pressure monitoring system Once BLE tire sensor installed in wheel, tire pressure and temperature can be displayed in cellphone with APP. During travel, tire pressure and temperature displayed in real time and send alert when statistics' abnormal. For your safety, please read manual before using, thank you! sensor parameters Sensor dimensions 7.1cm*5.3cm Sensor plastic part material Nylon / glass fiber Temperature resistance of the shell -50℃-150℃ Volume resistivity of silica gel ≥1.0×1013Ω•cm The silicone heat-resistant -50℃-200℃ Antenna material Phosphor copper nickel platin Metal material of valve Aluminium (oxidation treatment) Rubber pad material EPDM Valve weight 14.0g Full weight of sensor (including valve nozzles) 26.5g±2g Sensor working temperature - 40℃-85℃ Battery model CR2032 Battery capacity 350mAh working voltage 2.1V-3.3V Emission current 140uA Self-checking current 2.5mA Sleep current 2.4uA Battery temperature resistant -40℃-125℃ Emission frequency 2.4GHZ Emissive power 0dbm

GTS 342R6A 2" serial prismless 600m total station for survey and construction Specifications GTS-342R6A DISTANCE MEASURING Max. Distance one prism 3.5KM (good weather) reflecting paper 1KMm (based on different condition) 　 prismless 600m (based on different condition) display Max:999999.99M Min:1MM accuracy 2+2PPM(with prism), ＜100M,3+2PPM,＞100M,5+5PPM(no prism, fine) measuring time fine: ＜1.5s, tracing: 0.1s,repeat:＜0.3s wether constance change automatic change after input constance prism constance change automatic change after input constance ANGLE MEASURING measurment way absolute encode Crosshair plate diam. 79MM Min. Reading 1" optional accuracy 2" VERTICAL COMPENSATOR system dual axis liquid-electric sensor working range +/-4' precision 1" LEVEL SENSITIVITY plate level 30"/2mm cicular level 8'/2mm TELESCOPE image erect length of telescope 152MM Diam. of objective len's telescope:45mm/distance measure:47mm Magnificant 30* Field of view 1° 30' Min. focus 1.3m DISPLAY type dual face POWER source chargeable lithium battery voltage DC7.4V continues working time 8 H MEASURMENT AND WEIGHT dim. L216*W200*H350 MM weight 6.0KG

High Speed 14 Head Salad Weigher For Vegetable Fruit Salad With 7.5L Hopper The salad weigher is the second-generation salad scale developed by Kenwei. It has faster speed and better accuracy. At the same time, the salad weigher is equipped with a 7.5-liter large-capacity hopper, which reduces the number of additions and improves work efficiency. In addition to being suitable for salads, the salad weigher can also be used to weigh vegetables, fruits, or large-capacity materials. Features New high - integrated modular design, using CAN bus technology. Adopt high precision and high standard special sensors. An intelligent fault alarm prompts more convenient maintenance. High-speed asynchronous discharge function, effectively prevent material blocking. Modbus industry-standard communication protocol realizes the combination of balance and packaging machine interface Intelligent multiple sampling stable mode, more accurate weighing.

A rotary evaporator (rotovap or rotatvap) refers to a kind of equipment for solvent evaporation under reduced pressure, which is composed of a vacuum system, a heated water or oil bath, a condenser and a motor that rotates the evaporation flask. As its name suggests, what is special is that the evaporation flask can rotate. A complete rotary evaporator is generally composed of the following parts, which cooperate with each other and all play an essential role in the working process of a rotary evaporator. 1. Better security. The stainless steel and aluminum alloy are widely used in the mechanical structure, and all glass parts are made of heat-resistant high borosilicate glass, which ensure a better security. Besides, the water/oil bath can be equipped with transparent covers to prevent splashing, and anti-explosion frequency changer and dynamo are available as well. All of these designs contribute to better security. 2. Higher evaporation efficiency. There are several factors contributing to higher evaporation efficiency. Firstly, the rotating flask can rotate at a constant speed, and materials can form a widespread film on the inner surface of the flask, which improves the evaporation efficiency greatly. Secondly, the high-efficiency glass condenser can improve the evaporation efficiency as well. Last but not least, continuous feeding and high vacuum degree are another factors. 3. More convenient operation. It's much more convenient to use a rotary evaporator, because the electrodeless speed regulation, digital display K type sensor and intelligent temperature control and other designs adopted by it.

This device is a new test chamber combined with temperature test chamber and crush test chamber. This device is design and manufactured accord to international standards UN38.3, IEC62133, IEC60086-4 etc., can simulate a temperature test environment, can also monitor detect the test result under this environment. It is a good choice for battery, capacitors, electronic products simulate test equipment. Crush force system Travel limit device Voltage acquisition system Temperature control system Crush force: 1-19.6KN (g=9.81N/kg) Crush Speed: 1-20mm/s Speed error: ±1% Crush space: 300 * 300 * 300mm Crush surface: diameter 150mm Crush force: 1-19.6KN (g=9.81N/kg) Force error: ±1% Displacement error: ±0.5% Drive: hydraulic (L-HM46 oil) Motor: servo motor Test temperature: 0-100 centigrade Temperature wave: ±0.5 centigrade Temperature rise: 3 ℃ / min Temperature cooling: 1 ℃/min Voltage measure range: 0-50V Voltage resolution: 1mV Voltage acquisition frequency: max. 110Hz Test time: 0-99hour Data output: RS232 Language: En & Simplified Ch Power supply: 380V 50Hz, 1.5KW Plug: 5 round pins plug

Introduction to SLYD Series Dyno The SLYD dynamometer adopts AC frequency conversion feedback loading, and the loading energy is fed back to the power grid through the AC load generator; the torque and speed are measured directly by the torque sensor; Technical Advantages 1. Energy saving of electric dynamometer: the basic principle of hydraulic and eddy current dynamometer is to convert the mechanical energy generated by the prime mover into heat energy, which will be taken away by water cooling. The energy generated by the prime mover can not be recovered, and energy consumption is also required in the conversion process. However, the electric dynamometer can convert the mechanical energy generated by the prime mover into electrical energy and feed back to the internal power grid for other equipment to use. 2. The loading mode of electric dynamometer: the hydraulic dynamometer can only be loaded in one direction, and the loading performance will be worse when the speed is lower than a certain value; it can not be used as reverse towing equipment, and it needs to be equipped with additional driving equipment when the engine mechanical efficiency test is required. The eddy current dynamometer can be bi-directional loading, but its loading performance is worse than that of hydraulic dynamometer at low speed, so it can not be used as reverse towing equipment. When the engine mechanical efficiency test needs to be done, additional traction equipment should be equipped.

VS10 VS11 VS12 VS13 VS20 VS21 VS22 VS23 Measuring Standard Glass Scale - Grating period: 20μm (0.02mm) Optical Detecting System Transmissive Infrared System: wave length 880mm Slide Carrier System Vertical five bearings supporting system Resolution 5μm 1μm 5μm 1μm 5μm 1μm 5μm 1μm Measurement Travel 50-1200mm Every 50mm Not available 1300-3000mm Not available Every 100mm Accuracy 50-450mm ±3μm - ±5μm -- 500-800mm ±10μm ±5μm ±10μm ±5μm -- 1050-2000mm ±10μm ±5μm ±10μm ±5μm -- 1300-3000mm -- ±10μm/m Repeatability 2μm (0.002mm) Hystersis 3μm (0.003mm) Protection IP 53 Power supply DC 5V ± 5% Output Signal TTL TTL 422 422 TTL TTL 422 422

Ozone is a pale blue gas with a distinctively pungent smell. Ozone gas is a powerful oxidant and has many industrial and consumer applications related to oxidation. This same high oxidising potential, however, causes ozone to damage mucous and respiratory tissues in animals, and also tissues in plants, above concentrations of about 100 ppb. This makes ozone a potent respiratory hazard and pollutant near ground level. Ozone gas odour is sharp, reminiscent of chlorine, and detectable by many people at concentrations of as little as 10ppb in air.

ES-3A vibration tester.pdf Vertical and Horizontal Vibration Shaker Table EN 60068-2-6 Standard for R&D Laboratory Application Sine Random Shock Vibration Testing Mahine, which mainly used for product vibration and shock environmental test environment, environmental stress screening test, reliability test, tests may be needed to do for aerospace, communications, electronics, electrical, communications, home appliances and other areas of the products. It is a test platform that meets all kinds of test specifications, and can be executed including IEC, MIL-STD, JIS, ASTM and other specifications.

Main Technical Featrues: Sample Position:10 sample positions (Continuous testing), Testing Time: Single sample around one minute, Batch sample no less than 55 tests/hour , HCT/DIL: HCT: input 0.00-0.99 ; Dilution Factor: input 1-99, Sample Type: Whole blood,Serum,Plasma, Temperature:10-35℃ Environment humidity: <85% Wavelength::630±20nm,LED light source Absorbance value tolerance (4 hours after turn it on) should be less than ± 5%; Absorbance precision tolerance shall be less than ± 5%; The accuracy error of absorbance should be less than ± 5% Power:a.c100～240V 50/60Hz Air pressure: 86KPa ～ 106KPa; Dimension (length × width × height):340mm×320mm×280mm, Instrument Weight: 8kg.

BTGJ-II Upscale crime scene investigation tool kit Function A. Demolish field obstacles to ensure the smooth investigation B. Disassemble object that carries mark evidence C. Disassemble and cut object that carries mark evidence D. It provides various tools for evidence collection E. Lift tool marks F. Mark and number evidences G. Check the presumptive charged body H. It provides tools for field measuring I. It provides tools for measuring mark evidence J. It provides materials for packing evidence K. It provides personal protective equipment L. Field note taking

SDS3 Series is the smallest DRO with strong function for single axis dispaly requirement. SDS3-1F DRO equips the RS232-C output function for PC or other special systems' connection. 1.Display: Bright Green LCD 2.Case: Metal 3.Power : AC80 - 240V (50/60 Hz) 4.Storage Temperature: -30℃ to 70℃ 5.Working Temperature: 0℃ to 45℃ 6.Relative Humidity: <90% (20±5℃) 7.Dimensions (H x W x D): 94mm x 253mm x 119 mm

Product description: Electric sliding platform is driven by linear motor, guided by linear slide guide, and controlled by closed-loop device (usually grating ruler). It is a kind of high precision, high speed and high load capacity electric linear sliding platform. PDV has been committed to the research of linear motor slide, combined with years of accumulation and experience in improving motion accuracy, with our industry-leading processing, assembly, testing technology, we can provide you with high-quality, all-round linear motor slide solutions. Product features: 1. The main body is made of stainless steel to achieve high rigidity. 2. The guiding mode adopts linear ball guide rail, which realizes high precision. 3. It can correspond to a variety of chasing processing to meet the installation and use in different occasions. 4. Electroless chemical nickel is selected for the surface treatment of the main body to effectively prevent the reflection of light, especially in the field of optics. 5. The stroke and table size can be freely selected according to the actual needs.