Analyzers

Product description : Two point button calibration, automatic recognition of pH standard buffer solution Automatic temperature compensation ensures accurate measurement across the full range. Automatic power off, effectively saving battery energy consumption. Replaceable electrodes reduce maintenance and usage costs for instruments The full waterproof performance ensures complete protection of instruments in harsh environments. Suitable for soil, dough, etc. Two sections of No. 7 high-capacity power supply. Model PH-86 Range PH 0.00

Minimum Order: 1 bags

Product description : Two point button calibration, automatic recognition of pH standard buffer solution Automatic temperature compensation ensures accurate measurement across the full range. Automatic power off, effectively saving battery energy consumption. Replaceable electrodes reduce maintenance and usage costs for instruments The full waterproof performance ensures complete protection of instruments in harsh environments. Suitable for soil, dough, etc. Two sections of No. 7 high-capacity power supply. Technical Specification Model PH-68 Range PH , 0.00～14.0PH EC 0.00~19.9mS/cm Temp 0 , ～50℃ Resolution PH 0.1PH EC 0.1 , mS/cm Temp 0.1℃ Accuracy PH ±0.1 , PH EC ±2%FS Temp ±1℃ Automatic Temperature Compensation 0℃～50℃ Battery Type 2×1.5V( AAA Batteries) Operating Temperature 0℃～50℃ Calibration 2 points with auto buffer recognition Dimensions 207 x 32 x 36 mm Weight 100g

Minimum Order: 1 bags

Model PH-08 Range PH 0.00～14.00PH Temp 0～50℃ Resolution PH 0.01P , H Temp 0.1℃ Accuracy PH ±0.02PH Temp ±0.1℃ Automatic Temperature Compensation 0℃～50℃ Battery Type 2×1.5V( AAA Batteries) Operating Temperature 0℃～50℃ Calibration 2 points with auto buffer recognition Dimensions 210 x 40 x 25 mm Weight 97g

Minimum Order: 1 bags

Range ORP -999～999mV Temp 0～50℃ Resolution ORP 1mV< , br> Temp 0.1℃ Accuracy ORP ±5mV Temp ±1℃ Automatic temperature compensation 0℃～50℃ Battery 2×1.5V , (AAA) Operating temperature 0℃～50℃ Automatic shut-down 8min Dimensions 207x32x36mm , weight 85g

Minimum Order: 1 bags

Range EC 0.00 ～ 4.00 mS/cm TEMP 0～50℃ Resolution EC 0.01 mS/cm TEMP 0.1℃ Accuracy EC ±2℅F·S , TEMP ±1℃ Automatic Temperature Compensation 0℃～50℃ Battery Type 2×1.5V(AAA) Operating Temperature 0℃～50℃ Dimensions 207mm , ×32mm×36mm Weight 85g

Minimum Order: 1 bags

Model EC-3185 Range EC 0.00~4.00mS/cm< , br> CF 0.0~4.00CF TDS 10~4000ppm Resolution EC 0.01m , S/cm CF 0.01CF TDS 10ppm Accuracy ±2℅F·S Oper , ating Temperature 0℃~50℃ Automatic Temperature Compensation 0℃~50℃ Battery Type 4×1.5V(AG13) Dimensions 170mm×38mm , ×38mm

Minimum Order: 1 bags

Range 0.00 ～ 4.00 mS/cm Resolution 0.01 mS/cm Accuracy ±2℅F·S Automatic Temperature Compensation 0℃～50℃ Battery Type 4×1.5V(AG13) Operating Temperature 0℃～50℃ Dimensions 245x 22 x 20 mm Weight 75g

Minimum Order: 1 bags

Range EC 0.00 ～ 4.00 mS/cm TEMP 0～50℃ Resolution EC 0.01 mS/cm TEMP 0.1℃ Accuracy EC ±2℅F·S , TEMP ±1℃ Automatic Temperature Compensation 0℃～50℃ Battery Type 4×1.5V(AG13) Operating Temperature 0℃～50℃ Dimensions 290x 35 x 35 mm Weight 109g

Minimum Order: 1 bags

Product description : Soil EC98331 is a portable device for measuring soil salt.Conductivity can be measured in units of μS/cm, mS/cm or dS/m.It can realize the parameter measurement of specific environment. Range 0.00～ 4.00 mS/cm 0.00~4.00 dS/m 0~4000μS/cm 0.0~50.0°C （32.0~122 , .0°F） Resolution 0.01 mS/cm 0.01 dS/m 1μS/cm 0.1℃（0.1℉） Accuracy< , br>±2℅F·S ±50μS/cm，0~2000μS/cm ±30 , 0μS/cm，2000~4000μS/cm ±1.0°C （±1.5

Minimum Order: 1 bags

Model PH-2023 Range PH 0.00～14.00PH< , br> Temp 0～50℃ Resolution PH 0.01P , H Temp 0.1℃ Accuracy PH ±0.02PH Temp ±0.1℃ Automatic Temperature Compensation 0℃～50℃ Battery Type 2×1.5V( AAA Batteries) Operating Temperature 0℃～50℃ Calibration 2 points with auto buffer recognition Dimensions 207 x 32 x 36 mm Weight 90g

Minimum Order: 1 bags

Intelligent pen type three in one tester, capable of measuring water and wettable solids such as soil, dough, milk, fruits, meat, etc. Use AAA batteries, large capacity and long-lasting. Accurate and fast measurements and fewer calibrations. Two point button calibration, automatic recognition of pH standard buffer solution. Automatic temperature compensation ensures accurate measurement across the entire range Automatic power shutdown effectively saves battery energy consumption. The replaceable electrode reduces the maintenance and usage of the instrument. Fully waterproof performance ensures complete protection of instruments in harsh environments. Model PH-68 Range PH 0.00～14.0PH EC 0.00~19.9mS/cm Temp 0～50℃ Resolution PH 0.1PH EC 0.1mS/cm Temp 0.1℃ Accuracy PH ±0.1PH EC ±2%FS Temp ±1℃ Automatic Temperature Compensation 0℃～50℃ Battery Type 2×1.5V( AAA Batteries) Operating Temperature 0℃～50℃ Calibration 2 points with auto buffer recognition Dimensions 207 x 32 x 36 mm Weight 100g

Minimum Order: 1 bags

Rohde and Schwarz FSU50 RF Spectrum Analyzer 20 Hz to 50 GHz Description of FSU50 Spectrum Analyzer The R&S FSU spectrum analyzers are performance leaders in dynamic range, phase noise, level accuracy and resolution bandwidth- all factors that are essential for the user's ability to design, characterize, and manufacture next generation wireless elements. Features Frequency Range- 20 Hz to 26.5 GHz DANL- -158dBm (1 Hz RBW) Phase Noise (Typ.)- -133 dBc @ 10 KHz offset (1 Hz RBW) TOI (Typ.) +25 dBm Resolution Bandwidth- 1 Hz to 50 MHz DANL with Preamplifier option B24: typ. -168 dBm (1Hz RBW) @ 20 GHz Fast ACP in time domain Up to 70 measurments per second(including trace transfer via GPIB) Measurement routines for TOI, MC ACP(R), OBW, CCDF, APD, etc. as standard. Application firmware available for GSM/EDGE, Bluetooth, WCDMA/ HSPDA/ TD- SCDMA, CDMA-2000/ 1xEV-DV/ 1xEV-D0, etc. Specifications & Attributes (Spectrum Analyzers) Form Factor Benchtop Application Software Bluetooth ( /FS-K8 ) CDMA2000 ( /FS-K83 ) GSM with Edge ( /FS-K5U ) HSDPA ( /FS-K74 ) Noise Figure ( /FS-K30 ) Phase Noise ( /FS-K40 ) TD-SCDMA ( /FS-K77 ) Average Noise Level -158 dBm - +25 dBm Frequency 8 MHz ( /B73 ) 10 MHz ( /B27 /B4 ) 640 MHz ( /B5 ) 100 KHz - 3.6 GHz ( /B9 ) 10 MHz - 3.6 GHz ( /B25 ) 20 Hz - 50 GHz 100 KHz - 50 GHz ( /B24 ) List of Options B10 External generator control B12 Output attenuator for tracking generator for FSU, FSQ B18 Removable Hard Disk (not retrofittable) B19 Second Hard Disk for FSU-B18 (for FSU-B18,variant 1303.0400.02) B20 Extended environment specification. Random vibr. 1.9G RMS, 0-55°C (not retrofittable) B21 LO/ZF connections for external mixers (for FSQ26, FSQ40,FSU26, FSU43, FSU46, FSU50) B24 Preamplifier 30dB, 100 kHz to 50GHz (for FSMR26/43/50, FSQ26/40, FSU26/43/46/50; B25 Electronic attenuator 0 to 30 dB, Preamplifier 20 dB, 10MHz - 3.6 GHz for FSU, FSQ B27 FM output, 10 MHz bandwidth B4 OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR B5 Output for low phase noise 640MHz reference signal for FSU3, FSU8, FSQ3 und FSQ8 B73 Vector signal analysis for FSU demodulation bandwidth 8 MHz (FSU), broadband demodulation hardware included B9 Tracking generator for FSU and FSQ, 100 kHz - 3.6 GHz C3 Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). C5 Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s). DCV-2 Documentation of calibration values DCV-ZP Printout of DCV (additional, in combination with DCV-Option only) FS-B33 USB mass memory write protection, disables writing to USB memory sticks (ex factory only) FS-K10 GSM/EDGE/EDGE Evolution Measurement Appl (for FSG/FSQ/FSU) FS-K110 Analysis of TETRA II / TEDS signals (for FSQ, FSU with option FSU- B73) FS-K15 VOR/ILS measurements for FSMR FS-K30 Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU FS-K40 Application firmware for phase noise measurements for FSMR, FSP, FSQ, FSU FS-K5 Application firmware GSM/EDGE tests for FSP, FSU, FSQ FS-K5U Upgrade of FS-K5 to FS-K10, GSM/EDGE/EDGE Evolution Measurement Appl (for FSG, FSQ, FSU) FS-K7 FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU) FS-K72 Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ FS-K73 Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP, FSU, FSQ FS-K73+ 3GPP HSPA+ UE transmitter test, application firmware (for FSMR, FSP, FSQ, FSU, FSUP, FS-K74 3GPP HSDPA base station test application firmware for FSMR, FSU, FSP, FSQ FS-K74+ 3GPP HSPA plus, base station test. Application firmware (for FSP, FSQ, FSU, FSG; FS-K76 3GPP TD-SCDMA base station test; application firmware for FSMR, FSP, FSQ, FSU FS-K77 3GPP TD-SCDMA mobile station test; application firmware for FSMR, FSP, FSQ, FSU FS-K8 Application firmware for Bluetooth measurement on FSP, FSU and FSQ FS-K82 CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ FS-K83 CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP, FSQ, FSU FS-K84 1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ FS-K85 1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU FS-K9 Measurements with NRP power sensors NRP- Z11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4 FSP-B10 External generator control for retrofit of FSP, FSU, FSQ, ESPI, ESCI FSP-B28 Trigger port for FSP,FSQ,FSU; for indication of trigger conditions K40 Phase noise measurement application K7 FM Demodulation R3 Three years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. R5 Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. ZZA-411 19" adapter, 4 HU, 1/1 for BW2000 cabinets

Product Description Portable Syngas Analyzer for CO2 Heating Value biomass gasifications steel making process applications Here are a few considerations and recommendations for portable syngas analyzers for CO2 heating value measurement in biomass gasification for steelmaking processes: 1. Gas Components Monitoring: Ensure the analyzer can accurately measure the components of syngas, including CO, CO2, H2, CH4, and other trace gases that might be present. 2. Accuracy and Precision: Look for analyzers with high accuracy and precision in measurements. This is crucial for reliable data in process optimization. 3. Response Time: A fast response time is important for real-time monitoring and control. It helps in making quick adjustments to the process. 4. Temperature and Pressure Range: Ensure the analyzer can operate within the range of temperatures and pressures typically encountered in the gasification process. 5. Durability and Portability: Since it's a portable analyzer, it should be robust enough to withstand the conditions of an industrial setting. It should also be easy to transport and set up. 6. Calibration and Maintenance: Check if the analyzer has a straightforward calibration process and inquire about maintenance requirements. 7. Data Logging and Communication**: Look for features like data logging, which can be useful for trend analysis. Also, consider if it has the capability to communicate data to a central monitoring system. 8. Safety Features: Ensure the analyzer has safety features in place, especially when dealing with potentially hazardous gases. 9. Power Source: Consider the power requirements and if the analyzer can be powered using readily available sources in your facility. 10. Cost and Support: Evaluate the cost of the analyzer and the availability of technical support from the manufacturer. For specific product recommendations, I recommend consulting with specialized suppliers or reaching out to companies that specialize in gas analysis equipment. They can provide you with detailed information on available models that meet your specific requirements. Keep in mind that the market might have new offerings beyond my last training data in September 2021, so it's a good idea to check for the latest options. O2%+CO%+CO2%+CH4%+CnHm%+H2% All measurement in one unit Applications coal chemical process steel making process as blast furnace, converter, coking, direct iron ore smelting reduction syngas production from Biomass and coal gas gasification processes Components Method Range Resolution Precision CO2 NDIR 0-5% to 100% 0.01% ≤2% CO NDIR 0-5% to 100% 0.01% ≤2% H2 TCD 0-5% to 100% 0.01% ≤3% O2 ECD 0-5% to 25% 0.01% ≤3% CH4 NDIR 0-5% to 100% 0.01% ≤2% CnHm (optional) NDIR 0-5% to 10% 0.01% ≤2% Note: Measurement range can be customized by the requirement. Max: 6 components at the same time. Response Time (TD+T90) <10s (NDIR) Response Time 15min I/O port RS232 Work temperature 0～50℃ Relative humidity 5～85% Ambient air pressure 86～108kPa Power supply AC 220±10%V 50Hz±1Hz Weight About 3.5kg

Internal Automatic Calibration System Digital Analytical Balance Single Precision Mass Sensor The visual appearance of the product is blent into the simple concept,stylish and generous.Specially makes the fine pouring cast-aluminium outer covering,so a to the enhance the balance of the anti-static anti-jamming capacity.The panel with five operational button,sliding glass windscreen provide big space,insightful vision and operate easily.We use high precision magnet sensor to keep the weighing more fast and stable. Weighing application mode: 1.Percent weighing function 2.Density weighing direct reading function 3. Animal weighing function 4. Set object weighing and counting function 5. Cost settlement function 6. Check weight function 7.Wool / Net / Skin weighing function 8.Peak hold function 9. Cumulative function Application: Laboratory, Industrial, Education, Retail, Food, Jewelry and specialty market. Maximum weighing 310 g Minimum reading 0.001 g Repeatability ±0.002< , br>g Linear error ±0.003 g Stable time ≤3 s Weighing pan size Φ90 mm Operating temperature 17.0~25.5 ℃ Calibration method 6.5 kg Net weight External calibration