Alloy

Inconel is a family of austenitic nickel chromium based super alloys. Inconel alloys are oxidation corrion resistance materials well suited for service in extreme environments subjects to pressure and heat.When heated,Inconel forms a rhick,stable,passivating oxide layer protecting the surface from further attack.Inconel retains strength over a wide temperature range,attrative for high temperature applications where aluminum and steel would succumb to creapas a result of thermally induced crystal vacancies.Inconel's high temperature strength is developed by solid solution strengthening or precipitation hardening,depending on the alloy.

Heat-Proof Magnesium Alloy Sheet For Computer, Communication , Consumer Electronics Description Material Advantages Environm , ental protection materials Green recyclable, renewable and sustainable development Polymer matrix composite Specific strength, greater specific modulus Metal matrix composite High heat and conductivity compound material Make products of any shape you need Function Good fatigue resistance and Good shock absorption. Good safety performance in case of overload. Ablation resistance, good friction performance, High electrical insulation performance, excellent corrosion resistance, and special optical, electrical and magnetic properties The thermal expansion coefficient is small and the size stability is good. Good high temperature performance and good wear resistance. Good fracture toughness. No moisture absorption, no aging, good air tightness. Introduction 1. Magnesium alloy has been widely used in aviation, aerospace, transportation, chemical industry, rocket and other fields because of its high specific strength, large modulus of elasticity, good heat dissipation, good shock absorption, greater impact load bearing capacity than aluminum alloy, and good corrosion resistance to organic matter and alkali. 2. In addition, the application potential of magnesium alloy in medical devices is great; if the metal magnesium enterprises can make a breakthrough in processing performance and product price, then magnesium alloy will also be widely used in LED industry. Advantages of magnesium alloy used in automobile parts 1) Magnesium alloy used in automobile parts has the following advantages: it can significantly reduce vehicle weight, fuel consumption and exhaust emissions, and improve the overall economic index of fuel. 2) 60% of the fuel used in the car is consumed by the self weight of the car. For every 10% of the weight loss of the car, another 8% to 10% will be reduced. 3) The weight reduction of the car body can improve the pulling payload and improve the braking and acceleration functions. 4) The use of magnesium alloy can improve the shock absorption function and reduce the noise. Corresponding low improves the safety performance of the car. magnesium alloy automobile parts trumpet plate truck hub transmission case oil pump distributor and headlight bracket camshaft cover clutch housing oil cover wheel center of coal mining car crankcase blade cover and engine bracket engine bracket and body fan blade oil filter gearbox housing

Best Quality Maraging Steel Nickel Material Inconel 600/601/602CA/617 Etc.600 30 C276 Alloy Steel Bar Product Description: We produce High Temperature Superalloy round rods. We melt good quality Ni-based Alloy round rods with Vacuum Furnaces and Induction Furnaces. We can cast and machine the hard Nickel-based Alloy round rods as per the drawings. We would like to help select suitable Ni-based Alloy Grade as per your specific working condition. Nickel-based alloys have been in use for producing various components such as vanes or combustion chambers.The material can be implemented as wrought or as precision-cast parts or as centrifugal cast parts.The design of Nickel superalloys, which is aimed at an enhancement of both their oxidation resistance and their hot corrosion resistance, has received considerable impetus recently, especially since the advent of overlay coating techniques and the extensive studies which have been undertaken to elucidate the hot corrosion mechanisms and the effect of alloying elements. Product name Nickel Alloy Bar Certificate ISO9001,CE or as per customer. Surface Polished Size Accord , ing to customer needs Standard AISI, ASTM, GB,BS,EN,JIS,DIN Material Nickel Alloy Application Construction decoration,etc. Feature Representative type of Ferrite stainless steel, with magnetic Good cost performance, price stability Good shaping capability, weld bending capability, high thermal conductivity, low thermal expansion Advantages Strong corrosion and decorative effect TradeTerms FOB, CFR, CIF, EXW. Payment Terms T/T,L/C at sight 30%T/T in advance,balance 70% should be paid after receiving the copy of B/L. Cooperation Ship-owner MSK, CMA, MSC, HMM, COSCO, UA, NYK, OOCL, HPL, YML, MOL Nickel Inconel 600 Material 601 602CA 617 Etc.600 30 C276 Alloy Steel Bar 0 Qingsen, one of the industry 's leading supplier of Truck Body Parts,Trailer Accessories and Commercial vehicle components since 2018.Our products cover more than 8o0 kinds which include Door Lock System.Hinges, Fasteners, Cargo Control, Door Seal, Door Retainer,Buckle, Roller,E-track, Winch,Buffer, Folding Step,Deck Ring etc. And can completelyserve for trucks,trailers, containers etc.we excel in providing our customers with the best in value by deliveringthe products you need.Our team strives for "extraordinary' in providingthe truck body parts and trailer parts industry with the best in productsand service which is unparalleled in the industry.when you need any parts related to a truck or trailer or container of anykind.Qingsen is your world-wide ONE-STOP SHOP. With more than 500suppliers and factories nationwide, we help you get the projects donequickly and correctly. Q1: Can I have one or two samples for checking? A: Yes, one free samples and freight collect, trial order is aslo welcome. Q2: What's your lead time? A: Depending on orders, usually 10~35 days Q3: What countries have you exported to? A: Worldwide! Q4: Do you have MOQ ? A: Depending on exact product, usually 500 units, no MOQ if goods in stock, most products list on Alibaba we have hundreds to thousands in stock. Q5: Can you meet my requirements like print LOGO on the product, specific packaging, etc A: Of course! we are a profesional factory, everything can go in you way! Q6: Can I visit your company? A: sure, any time at your convinience, please inform us before your visit Q7: How is my product shipped? Will my product arrive on time? A: By sea, by air or by express carriers (UPS, FedEx, TNT) transit time depends on freight rates. Q8: What's terms of payment? A: 30% T/T deposit, 70% balance before delivery. B: 30% T/T deposit, 70% balance against BL. C: 100% in advance, L/C at sight, Western Union/ Paypal for small amount payment.

20 years' experience in exporting various offorging/rolling grinding steel balls, mill steel rods and cylinders... OEM/ODM services Exporting to Europe and the South America MOQ of 10Tons Specialized in Precision Casting and Forging Ball Grinding Media Fields Suizhou Gaincin Machinery Co.,Ltd(info#GAINCIN.com.cn) has and insists on its own marketing philosophy from production to sales, stable quality and best quality service, mutual benefit with customers. In order to meet various sizes of forging steel grinding media balls, skew rolling steel grinding media balls, casting alloy chromium steel balls with Cr contents range dia.8mm to 150mm,sections,cylinder field development request, we constantly explore and innovate, making our product with the higher quality and diversification to meet the different customer`s request from all over the world. Meeting ISO Standard and SGS All of our grinding steel balls are processed according to the standards of ISO 9001:2008, and our balls conform to the requirements of SGS and RoHS. Work with Us Today Immediately! We sincerely say thanks for our customer, because of your support, we become more professional. Grinding Media Ball is the most common in the world and also the most fascinating, although sometimes we cannot absolute get super-hardness balls, we are still making great efforts to explore and approach it. Gaincin Machinery is an energetic team and we are expecting your cooperation. Contact us today.

Minimum Order: 10 long tons

Introduction The forged products of Achemetal Tungsten & Molybdenum Co., Ltd. include tungsten, tungsten-lanthanum, tungsten-aluminum, tungsten-rhenium and other metals of which all the raw materials are high-purity powder, featuring less impurity content in bar blanks, high sintering density and large deformation of the forged finished products. We lay emphasis on the control over forging technologies in the machining process, which is supplemented by an HIP process as necessary, to ensure the characteristics of high density, fine crystal grains and easy deep processing of products. Tungsten-molybdenum alloy forged products with high-density fine crystal grains have become a big feature of Achemetal products. According to different machining processes, tungsten bars have the conventional process density of 18.5 and the process density of more than 19.0 after HIP. Product description Product Name tungsten block 38.1mm 1.5'' pure 1kg tungsten cube blcok price Material Pure tungsten and tungsten heavy alloy Standard ASTM B760, GB-T 3875, ASTM B777 Application Ornament,decoration,Balance weight,desktop,gift,target,Military industry Processing Sintering, Rolling, Forging, machining Surface clean, alkali wash, polished Density 18.0 g/cm3 --19.2 g/cm3 Popular size pure tungsten and tungsten alloy cube/block: 6.35*6.35*6.35mm 10*10*10mm 12.7*12.7*12.7mm 20*20*20mm 25.4*25.4*25.4mm 38.1*38.1*38.1mm(1kg tungsten cube) 47*47*47mm(2kg tungsten cube) 51*51*51mm(2.5kg tungsten cube) 54.5*54.5*54.5mm(3kg tungsten cube) 103*103*103mm(20kg tungsten cube

Grade 1050/1060 0.1*310mm Aluminum Foil Aluminium foil has anti - leakage, fresh, anti - counterfeiting, anti - theft, anti - moisture and other functions, but also has a good antibacterial ability. Aluminium Foil adhesive Tape is a self-adhesive sealing tape consisting of a high-performance rubber adhesive compound, protected by an aluminium film. It is highly adhesive, even at low temperatures, to all common building materials. And it is resistant to UV-rays. During ageing, the film naturally changes colour but maintains quality in time. Application: Chemical industry, electronics, standard parts, fasteners, kitchen equipment, mechanical processing and other industries Grade 1050 / 1060 Aluminum Foil Oxidized Surface 0.1 X 310mm 0 Package Grade 1050 / 1060 Aluminum Foil Oxidized Surface 0.1 X 310mm 1

1. Description Of Machined Molybdenum Crucible 35ml Volume: Machined molybdenum crucibles are mainly small-sized crucibles, which are machined from molybdenum rods by lathes. 2. Size Of Machined Molybdenum Crucible 35ml Volume: Purity Density Size Tolerance (mm) Wall thickness(mm) 99.95% ≥10.2g/ cm3 Diameter(mm) 10-100 Height(mm) 10- , 200 Diameter +/-5.0 Height +/-5.0 1-20 Other size can be processed by customer's request. Use Temperature: 1100~1800 ℃ Melting point: 2625 ℃ Surface: less than Ra 1.6 Standard: ASTM B387

We could produce C-103 niobum alloy wire, rod, sheet and target as per your requirements.

Minimum Order: 1 bags

High quality anodized LED aluminum profiles do not rust due to anodising and are suitable for indoor use as well as indoor bathrooms, kitchen interiors and outdoor use.The covers, ie diffuser, are of high quality and UV protected. The opal “milk glass” lid better fades the ledges and smoother light and prevents reflections from the shiny work surface. The clear lid allows all light to pass through. Model No.: KN21 Item Type: Surface LED Profile Dimensions: W35.0*H35.0 mm Standard length: 2m/pcs Suitable for led strip: PCB width up to 24mm Material: 6063 T5 Aluminum Alloy Treatment: Sandblasting oxidation Finished color: Silver/ Black/ White Diffuser material: PC Diffuser finished: Frosted Accessories: End caps, Clips, Hanging wiring kits Installation: Surface-mounted Standard Package: Inner Clear PE bag+EPE FOAM+Carton Box Customized Package: Available on request

Pure Nickel 99.8% Ni200/ Ni 201 foil/tapes/strip Features: pure nickel has a Nickel content of 99.6% giving it a pure nickel rating; Pure nickel will never corrode and come loose in high drain application. Pure nickel has excellent mechanical properties, high corrosion resistance in ifferent environments, and magnetic feature,high heat transfer, high conductivity, low gas volume and low vapor pressure. Pure nickel also has good spot welding properties and high tensile strength. Pure nickel strip mainly used in lithium batteries, battery ear, metal stamping parts, electric vehicles, nickel batteries, telecommunications, electric vacuum, special bulbs and other industries. 1. Low resistance, make the battery pack more powerful, save energy. 2. Pure Nickel to make it easy welding, stable connection 3. Dood tensile and easy operate assembly. 4. shaped design, save too much work for customer to assembly battery pack. 5. High Electrical Conductivity Size range Wire: 0.025 to 8.0 mm. Strip:0.05-1mm * 5-240mm The thickness and dimensions can be met what customers required. Physical properties 1.Spot welding of pure nickel is good 2.The resistance of pure nickel is lower 3. Battery discharge time of pure nickel strip longer 4. The battery spot welding is stronger. Pure nickel Functions/Applications 1. manufacturing nickel-cadmium battery 2. nickel-hydrogen battery 3. lithium cell 4. assembled battery 5. industries of electric tool and special lights 6. Superconductor Applications

Alloy Structural Steel Supplier ODM Alloy Structural Steel Supplier Stock 1. Structural alloy steel (structural alloy steel) refers to steel that is used as mechanical parts and various engineering components and contains one or several alloying elements in a certain amount. 2. Alloy structural steel is generally divided into quenched and tempered structural steel and case-hardened structural steel. ① The carbon content of quenched and tempered structural steel is generally about 0.25% to 0.55%. For structural parts of a given cross-sectional size, during the quenching and tempering treatment (quenching and tempering), if it is quenched along the section, the mechanical properties It is good, but if hardenability is not carried out and free ferrite appears in the microstructure, the toughness decreases. For steels with a tendency to temper brittleness, such as manganese steel, chromium steel, nickel-chromium steel, etc., they should be cooled quickly after tempering. The quenching critical diameter of this type of steel increases with the increase of grain size and alloying element content. For example, 40Cr and 35SiMn steels are about 30 to 40 mm, while 40CrNiMo and 30CrNi2MoV steels are about 60 to 100 mm. Structural parts such as shafts and connecting rods with large loads. ②Surface hardening structural steel is used to manufacture parts with hard and wear-resistant surface and flexible core, such as gears, shafts, etc. In order to make the toughness of the core of the part high, the carbon content in the steel should be low, generally 0.12 to 0.25%, and there should be an appropriate amount of alloying elements to ensure suitable hardenability. Nitride steel also needs to add alloying elements (such as Al, Cr, Mo, etc.) that are easy to form nitrides. Carburizing or carbonitriding steel, after carburizing or carbonitriding at 850~950℃, quenched and used in low temperature tempering (about 200℃). Nitrided steel is treated by nitriding (480～580℃) and used directly without quenching and tempering. 3.Production Process According to the steel grade and steel quality requirements, the smelting of alloy structural steel can be carried out by oxygen top-blown converter, open hearth, electric arc furnace; or by electroslag remelting and vacuum degassing. The ingot can be cast by continuous casting or die casting. The ingot should be slowly cooled or hot forged and rolled. When the ingot is heated, the temperature should be uniform and there should be sufficient holding time to improve segregation defects and avoid uneven deformation during forging and rolling; the steel after forging and rolling is small in size, especially carburizing with a carbon content of about 0.2%. Steel should be cooled rapidly at temperatures above 600°C to avoid aggravating the banded structure; for forgings with larger cross-sections, measures should be taken to eliminate internal stress and white spots. Quenched and tempered steel should be quenched into martensite structure as much as possible, and then tempered into sorbite structure; in the carburizing process of carburized steel, the concentration gradient of the carburizing layer should not be too large, so as to avoid continuous network on the grain boundary of the carburizing layer. Carbide; nitrided steel must first be heat treated to obtain the required properties, and then final finishing can be used for nitriding. After nitriding treatment, no processing is required except that the brittle "white layer" is ground and removed. 4. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a day!!! E-mail:jacklu@songshunsteel.com Skype , /Whatsapp/Wechat:+86-18269260283 Songshun Tiktok:mikizhuo Songshun Facebook:Songshun Steel Songshun YouTube:MiKi Zhuo Songshun Company Website:https://steelpurchase.com/ http://www.songshunsteel.com/ songshunsteel , 41404340

Minimum Order: 2 barrels

ASTM 8620 JIS SNCM220 DIN 1.6523 Alloy Structural Steel Application Application What is the application of 8620 steel? AISI 8620 alloy steel is mainly used as a material for impact and wear resistant parts such as automobile bearings, camshafts, etc. In the carburized state it is used for gears, ring gears, shafts and crankshafts.It can also be used for the claws and cone bodies of the roller cone bits for oil drilling and metallurgical open-pit mines, and to manufacture the forgings of the connecting rod valve section of the steam turbine gear whole rotor internal combustion engine. Heat Treatment AISI/SAE/ASTM 8620 Steel Heat Treatment （1）Glow It can be fully annealed by heating to 820 – 850℃ and holding until the temperature is uniform throughout the section, and furnace or air-cooled. （2）Cranking Tempering of heat treated and water cooled parts (not carburized) is done at 400 to 1300 F to improve the toughness of the case with minimal impact on its hardness. This also reduces the possibility of grinding cracks. （3）Hardening It is austenitized at around 840°C – 870°C and oil or water quenched depending on the cross-section size and complexity. And cool it in air or oil required. （4）Normalize 910ºC (1675ºF) and air cooled. This is another method to improve the machinability of 8620 steel materials. Normalizing can also be applied prior to case hardening. （5）Heat treatment This alloy can be hardened by heating to 1500 F and then water quenching. Carburize at 1650 to 1700 F in a suitable carburizing medium and oil quench to harden. Improved properties of the carburized case and core can be obtained by furnace cooling by carburizing at 1650-1700F and then reheating to 1575F. Test How is ASTM 8620 steel tested? Our AISI 8620 alloy steel guarantees high quality, and we use UT test to check each piece of steel; UT test: Ultrasonic Test, ultrasonic inspection and flaw detection, is one of the methods of non-destructive testing in the industry. When the ultrasonic wave enters the object and encounters a defect, a part of the sound wave will be reflected, and the transmitter and receiver can analyze the reflected wave, and the defect can be detected extremely accurately. And it can display the position and size of internal defects, and measure the thickness of materials. Ultrasound in UT is a mechanical wave with a frequency higher than 20 kHz. The frequency commonly used in ultrasonic flaw detection is 0.5 to 5 MHz. This kind of mechanical wave can propagate at a certain speed and direction in the material, and it will be reflected when encountering a heterogeneous interface with different acoustic impedance (such as a defect or the bottom surface of the measured object, etc.). We supply Songshun steel from stock AISI 8620 alloy steel round bar: Specifications: Diameter: 16mm – 800mm; Length: 2000mm-5000mm Surface: black/bright/polished/peeled/turned; AISI 8620 steel plate: Specifications: Thickness: 16-800mm; Width: 205mm-810mm; Length: 2000mm-5000mm Surface: black/bright/polished/peeled/turned; We also have our own cutting and processing facilities. Specifications can be tailored and customized to your needs. We have been producing alloy steel for more than ten years. As a professional 8620/1.6523/SNCM220 steel supplier, you are welcome to contact us at any time. songshunsteel41404340

Minimum Order: 1 bags

1. 8620 steel has high hardenability without brittleness. It is also called DIN 1.6523 and JIS SNCM220 steel. It also has good weldability, little tendency to form cold cracks, and good machinability and plasticity by cold deformation. It is used to make gears, shafts, bolts, springs, hand tools, etc.AISI 8620 alloy steel properties and 8620 steel composition as below. 2. 8620 chemical composition Carbon C: 0.18～0.23 Silicon Si: 0.15～0.35 Manganese Mn: 0.70～0.90 ASTM8620 alloy structural steel ASTM8620 alloy structural steel Sulfur S: Allowable residual content≤0.035 P: Allowable residual content≤0.035 Chromium Chromium: 0.40～0.60 Nickel Nickel: 0.40～0.70 Copper Cu: allowable residual content ≤ 0.030 Molybdenum Molybdenum: 0.15～0.25 3.AISI/SAE/ASTM 8620 Steel Heat Treatment （1）Glow It can be fully annealed by heating to 820 – 850℃ and holding until the temperature is uniform throughout the section, and furnace or air-cooled. （2）Cranking Tempering of heat treated and water cooled parts (not carburized) is done at 400 to 1300 F to improve the toughness of the case with minimal impact on its hardness. This also reduces the possibility of grinding cracks. （3）Hardening It is austenitized at around 840°C – 870°C and oil or water quenched depending on the cross-section size and complexity. And cool it in air or oil required. （4）Normalize 910ºC (1675ºF) and air cooled. This is another method to improve the machinability of 8620 steel materials. Normalizing can also be applied prior to case hardening. （5）Heat treatment This alloy can be hardened by heating to 1500 F and then water quenching. Carburize at 1650 to 1700 F in a suitable carburizing medium and oil quench to harden. Improved properties of the carburized case and core can be obtained by furnace cooling by carburizing at 1650-1700F and then reheating to 1575F. 4. For more steel product information,Please search our company(Dongguan Songshun Mould Steel Co., Ltd.) and check the official website!!! songshunsteel41404340

Minimum Order: 1 bags

Hot Rolled AISI 4340 Alloy Structural Steel Warehouse Introduction AISI 4340 alloy structural steel is a medium carbon nickel-chromium-molybdenum steel alloy, very similar to 4130 steel, but AISI 4340 alloy steel has high white spot sensitivity and temper brittleness, and is widely used in large- sized important quenched and tempered parts, shafts , transmission parts of heavy chemical machinery, etc., and AISI 4340 steel is a wear-resistant material with particularly good wear resistance, impact resistance and impact resistance, as well as excellent atmospheric corrosion resistance, and because the material is usually in Annealed condition, it also has the advantages of excellent hardenability, stability against overheating and short construction period. Our AISI 4340 alloy steel can be not only heat treated but also fusion and resistance welding. Chemical Composition The chemical composition of Song Shun AISI 4340 alloy structural steel. C:0.37-0.44 Si:0.17-0.37 S：≤0.035 P:≤0.035 Mn:0.50-0.80 Cr:0.60-0.90 Mo:0.15-0.25 Ni:1.25-1.65 Mechanical Properties The mechanical properties of AISI 4340 alloy structural steel Tensile strength σb (MPa): ≥980(100) Yield strength σs (MPa): ≥835(85) Elongation δ5 (%): ≥12 Area shrinkage ψ (%): ≥55 Impact energy Akv (J): ≥78 Elongation δ5 (%): ≥12 Area shrinkage ψ (%): ≥55 Impact energy Akv (J): ≥78 Impact toughness value αkv (J/cm2): ≥98(10) Sample size: sample blank size is 25mm AISI 4340 High Quality Alloy Steel Round Bar · GB steel number:   CN：40CrNiMoA   DIN：36CrNiMo4  JIS：SNCM439  BS： 816M40  US:AISI/ASTM4340 · Chemical component:   C:0.37-0.44  Si:0.17-0.37  S：≤0.35  P:≤0.35 Mn:0.50-0.80 Cr:0.60-0.90 Mo:0.15-0.25 N:1.25-1.65 · Usage: It is used as important quenched and tempered parts that require good toughness, high strength and large size, such as heavy machinery and high- load shafts, turbine shafts with a diameter greater than 250mm, helicopter rotor shafts, turbojet engine turbine shafts, blades, high Loaded transmission parts, crankshaft fasteners. gears, etc.; · Types:5140 /4140 / 4340 / 4142 / 15CrMo / 6150 / 38CrMoAI / 8620 ..... · Serve:OEM/ODM · Delivery status:With heat treatment (normalized, annealed or high temperature tempered) or without heat treatment Goods, the delivery status should be specified in the contract. Our company Dongguan Songshun Mould Steel Co., Ltd. specializes in the production of alloy steel for more than 10 years, mainly producing various alloy steel products, if you need more price, cooperation or quality information, please notify us jacklu@songshunsteel.com songshunsteel41404340

Minimum Order: 2 barrels