Alarms

Wiring Diagram The pink wire can be connected to the original car alarm horn or the alarm horn purchased together. Understand that the vehicle door trigger type is positive trigger or negative trigger. Connected to the green wire if it is positive trigger, and connected to the blue wire if it is negative trigger. Please install the SOS button where the driver can touch it. 5.2SIM card installation Please use the included screwdriver to open the case to insert the SIM card. If you intend to expand the storage space, then please insert micro SD and then assemble the case. Please make sure the SIM card is of GSM network, and you have topped it up with credit. Make sure that there is no call transfer and call display is on, the PIN code is locked. The format of the SMS message must be text format because device cannot recognize the PDU format. Note: The tracker will only accept a Micro size SIM card – ‘standard’ or ‘nano’ SIM cards will not work in the tracker.

Minimum Order: 10 long tons

4Specifications Content Parameters DIM 9.6×5.3×1.6cm Weight 70g Network GSM/GPRS Band 850/900/1800/1900Mhz GPS sensitivity -159dBm GPS accuracy 5m GPS start time Cold status 45s Warm status 35s Hot status 1s Applicable car power 12 V -24V Back up battery Chargeable 3.7V 350mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing

Minimum Order: 10 long tons

1Summary This product is based on the GSM / GPRS network and GPS satellite positioning system. It integrates anti-theft alarm, positioning, first aid and tracking functions in a brand new product which can locate and manage remote targets through SMS text messages, mobile app and web platform. Features Built-in GSM, GPS antenna, small size, beautiful and elegant. Support GPS and LBS (Location based service) dual tracking solutions. Support transferring the position data through SMS, GPRS and internet Support remote configurations It integrates anti-theft alarm, positioning, first aid and tracking functions 2Applications Mainly used in the positioning and tracking services of vehicles and other moving objects.

Minimum Order: 10 long tons

1Summary This product is based on the GSM / GPRS network and GPS satellite positioning system. It integrates anti-theft alarm, positioning, first aid and tracking functions in a brand new product which can locate and manage remote targets through SMS text messages, mobile app and web platform. Features Built-in GSM, GPS antenna, small size, beautiful and elegant. Support GPS and LBS (Location based service) dual tracking solutions. Support transferring the position data through SMS, GPRS and internet Support remote configurations It integrates anti-theft alarm, positioning, first aid and tracking functions 2Applications Mainly used in the positioning and tracking services of vehicles and other moving objects.

Minimum Order: 10 long tons

Contents 1 Summary 5 2 Applications 5 3 Hardware Description 5 4 Specifications 6 5 Start to use 6 5.1 Terminal installation 6 5.2 SIM card installation 7 5.3 Turn on the device 8 5.4 Device status light 8 5.5 GPRS configuration for live real-time tracking 8 5.6 Mobile APP 10 5.7 BAANOOL IOT’s Web Version 14 6 Function details 17 6.1 Changing password 17 6.2 Authorization 18 6.3 Single tracking 18 6.4 Continuous interval tracking 19 6.4.1 Limited times tracking at a time interval 19 6.4.2 Unlimited times tracking at a time interval 19 6.4.3 Unlimited times tracking at a distance interval 20 6.4.4 Smart tracking at both time and distance interval 20 6.4.5 Cancel interval tracking 20 6.5 Smart angle updating 20 6.6 GPS drift suppression 20 6.7 Exact street address 21 6.8 Location based service (LBS) / Cell-ID tracking 21 6.9 Auto answer 21 6.10 Forwarding incoming SMS messages 22 6.11 SIM Card Balance Enquiry 22 6.12 ACC ON/OFF Alert 23 6.13 Remote immobilizing 23 6.14 Fuel sensor calibrating 24 6.15 Configure times of alarm SMS 24 6.16 Alarms 25 6.16.1 Low battery alarm 25 6.16.2 Power disconnection alarm 25 6.16.3 Blind area alarm 25 6.16.4 SOS alarm 26 6.16.5 Geo-fence 26 6.16.6 Movement alarm 27 6.16.7 Over speed alarm 27 6.16.8 Fuel alarm 27 6.17 Remote control function (For G model) 28 6.18 Arming 28 6.19 Silent Arming 29 6.20 Disarming 29 6.21 Alarm function in arming state 30 6.21.1 Door opening alarm 30 6.21.2 ACC (Ignition / voltage) alarm 30 6.21.3 Acceleration Sensor Alarm 30 6.21.4 No GSM network alarm 31 6.22 Sleep 31 6.23 Check Status 32 6.24 Check IMEI 32 6.25 Local time setting 32 6.26 Reset Hardware 33 6.27 Configure parameters by USB 33 6.28 GPRS configuration for live real-time tracking 33 6.29 Activate Fuel value in GPRS data 36 6.30 Configure SMS managementr center number 36 6.31 Configure heartbeat package interval 36 6.32 Initialization 37 7 Package contents 37 8 Cautions 37 9 Troubleshooting 38

Minimum Order: 10 long tons

Contents 1 Summary 5 2 Applications 5 3 Hardware Description 5 4 Specifications 6 5 Start to use 6 5.1 Terminal installation 6 5.2 SIM card installation 7 5.3 Turn on the device 8 5.4 Device status light 8 5.5 GPRS configuration for live real-time tracking 8 5.6 Mobile APP 10 5.7 BAANOOL IOT’s Web Version 14 6 Function details 17 6.1 Changing password 17 6.2 Authorization 18 6.3 Single tracking 18 6.4 Continuous interval tracking 19 6.4.1 Limited times tracking at a time interval 19 6.4.2 Unlimited times tracking at a time interval 19 6.4.3 Unlimited times tracking at a distance interval 20 6.4.4 Smart tracking at both time and distance interval 20 6.4.5 Cancel interval tracking 20 6.5 Smart angle updating 20 6.6 GPS drift suppression 20 6.7 Exact street address 21 6.8 Location based service (LBS) / Cell-ID tracking 21 6.9 Auto answer 21 6.10 Forwarding incoming SMS messages 22 6.11 SIM Card Balance Enquiry 22 6.12 ACC ON/OFF Alert 23 6.13 Remote immobilizing 23 6.14 Fuel sensor calibrating 24 6.15 Configure times of alarm SMS 24 6.16 Alarms 25 6.16.1 Low battery alarm 25 6.16.2 Power disconnection alarm 25 6.16.3 Blind area alarm 25 6.16.4 SOS alarm 26 6.16.5 Geo-fence 26 6.16.6 Movement alarm 27 6.16.7 Over speed alarm 27 6.16.8 Fuel alarm 27 6.17 Remote control function (For G model) 28 6.18 Arming 28 6.19 Silent Arming 29 6.20 Disarming 29 6.21 Alarm function in arming state 30 6.21.1 Door opening alarm 30 6.21.2 ACC (Ignition / voltage) alarm 30 6.21.3 Acceleration Sensor Alarm 30 6.21.4 No GSM network alarm 31 6.22 Sleep 31 6.23 Check Status 32 6.24 Check IMEI 32 6.25 Local time setting 32 6.26 Reset Hardware 33 6.27 Configure parameters by USB 33 6.28 GPRS configuration for live real-time tracking 33 6.29 Activate Fuel value in GPRS data 36 6.30 Configure SMS managementr center number 36 6.31 Configure heartbeat package interval 36 6.32 Initialization 37 7 Package contents 37 8 Cautions 37 9 Troubleshooting 38

Minimum Order: 10 long tons

Contents 1 Summary 5 2 Applications 5 3 Hardware Description 5 4 Specifications 6 5 Start to use 6 5.1 Terminal installation 6 5.2 SIM card installation 7 5.3 Turn on the device 8 5.4 Device status light 8 5.5 GPRS configuration for live real-time tracking 8 5.6 Mobile APP 10 5.7 BAANOOL IOT’s Web Version 14 6 Function details 17 6.1 Changing password 17 6.2 Authorization 18 6.3 Single tracking 18 6.4 Continuous interval tracking 19 6.4.1 Limited times tracking at a time interval 19 6.4.2 Unlimited times tracking at a time interval 19 6.4.3 Unlimited times tracking at a distance interval 20 6.4.4 Smart tracking at both time and distance interval 20 6.4.5 Cancel interval tracking 20 6.5 Smart angle updating 20 6.6 GPS drift suppression 20 6.7 Exact street address 21 6.8 Location based service (LBS) / Cell-ID tracking 21 6.9 Auto answer 21 6.10 Forwarding incoming SMS messages 22 6.11 SIM Card Balance Enquiry 22 6.12 ACC ON/OFF Alert 23 6.13 Remote immobilizing 23 6.14 Fuel sensor calibrating 24 6.15 Configure times of alarm SMS 24 6.16 Alarms 25 6.16.1 Low battery alarm 25 6.16.2 Power disconnection alarm 25 6.16.3 Blind area alarm 25 6.16.4 SOS alarm 26 6.16.5 Geo-fence 26 6.16.6 Movement alarm 27 6.16.7 Over speed alarm 27 6.16.8 Fuel alarm 27 6.17 Remote control function (For G model) 28 6.18 Arming 28 6.19 Silent Arming 29 6.20 Disarming 29 6.21 Alarm function in arming state 30 6.21.1 Door opening alarm 30 6.21.2 ACC (Ignition / voltage) alarm 30 6.21.3 Acceleration Sensor Alarm 30 6.21.4 No GSM network alarm 31 6.22 Sleep 31 6.23 Check Status 32 6.24 Check IMEI 32 6.25 Local time setting 32 6.26 Reset Hardware 33 6.27 Configure parameters by USB 33 6.28 GPRS configuration for live real-time tracking 33 6.29 Activate Fuel value in GPRS data 36 6.30 Configure SMS managementr center number 36 6.31 Configure heartbeat package interval 36 6.32 Initialization 37 7 Package contents 37 8 Cautions 37 9 Troubleshooting 38

Minimum Order: 10 long tons

Contents 1 Summary 5 2 Applications 5 3 Hardware Description 5 4 Specifications 6 5 Start to use 6 5.1 Terminal installation 6 5.2 SIM card installation 7 5.3 Turn on the device 8 5.4 Device status light 8 5.5 GPRS configuration for live real-time tracking 8 5.6 Mobile APP 10 5.7 BAANOOL IOT’s Web Version 14 6 Function details 17 6.1 Changing password 17 6.2 Authorization 18 6.3 Single tracking 18 6.4 Continuous interval tracking 19 6.4.1 Limited times tracking at a time interval 19 6.4.2 Unlimited times tracking at a time interval 19 6.4.3 Unlimited times tracking at a distance interval 20 6.4.4 Smart tracking at both time and distance interval 20 6.4.5 Cancel interval tracking 20 6.5 Smart angle updating 20 6.6 GPS drift suppression 20 6.7 Exact street address 21 6.8 Location based service (LBS) / Cell-ID tracking 21 6.9 Auto answer 21 6.10 Forwarding incoming SMS messages 22 6.11 SIM Card Balance Enquiry 22 6.12 ACC ON/OFF Alert 23 6.13 Remote immobilizing 23 6.14 Fuel sensor calibrating 24 6.15 Configure times of alarm SMS 24 6.16 Alarms 25 6.16.1 Low battery alarm 25 6.16.2 Power disconnection alarm 25 6.16.3 Blind area alarm 25 6.16.4 SOS alarm 26 6.16.5 Geo-fence 26 6.16.6 Movement alarm 27 6.16.7 Over speed alarm 27 6.16.8 Fuel alarm 27 6.17 Remote control function (For G model) 28 6.18 Arming 28 6.19 Silent Arming 29 6.20 Disarming 29 6.21 Alarm function in arming state 30 6.21.1 Door opening alarm 30 6.21.2 ACC (Ignition / voltage) alarm 30 6.21.3 Acceleration Sensor Alarm 30 6.21.4 No GSM network alarm 31 6.22 Sleep 31 6.23 Check Status 32 6.24 Check IMEI 32 6.25 Local time setting 32 6.26 Reset Hardware 33 6.27 Configure parameters by USB 33 6.28 GPRS configuration for live real-time tracking 33 6.29 Activate Fuel value in GPRS data 36 6.30 Configure SMS managementr center number 36 6.31 Configure heartbeat package interval 36 6.32 Initialization 37 7 Package contents 37 8 Cautions 37 9 Troubleshooting 38

Minimum Order: 10 long tons

Contents 1 Summary 5 2 Applications 5 3 Hardware Description 5 4 Specifications 6 5 Start to use 6 5.1 Terminal installation 6 5.2 SIM card installation 7 5.3 Turn on the device 8 5.4 Device status light 8 5.5 GPRS configuration for live real-time tracking 8 5.6 Mobile APP 10 5.7 BAANOOL IOT’s Web Version 14 6 Function details 17 6.1 Changing password 17 6.2 Authorization 18 6.3 Single tracking 18 6.4 Continuous interval tracking 19 6.4.1 Limited times tracking at a time interval 19 6.4.2 Unlimited times tracking at a time interval 19 6.4.3 Unlimited times tracking at a distance interval 20 6.4.4 Smart tracking at both time and distance interval 20 6.4.5 Cancel interval tracking 20 6.5 Smart angle updating 20 6.6 GPS drift suppression 20 6.7 Exact street address 21 6.8 Location based service (LBS) / Cell-ID tracking 21 6.9 Auto answer 21 6.10 Forwarding incoming SMS messages 22 6.11 SIM Card Balance Enquiry 22 6.12 ACC ON/OFF Alert 23 6.13 Remote immobilizing 23 6.14 Fuel sensor calibrating 24 6.15 Configure times of alarm SMS 24 6.16 Alarms 25 6.16.1 Low battery alarm 25 6.16.2 Power disconnection alarm 25 6.16.3 Blind area alarm 25 6.16.4 SOS alarm 26 6.16.5 Geo-fence 26 6.16.6 Movement alarm 27 6.16.7 Over speed alarm 27 6.16.8 Fuel alarm 27 6.17 Remote control function (For G model) 28 6.18 Arming 28 6.19 Silent Arming 29 6.20 Disarming 29 6.21 Alarm function in arming state 30 6.21.1 Door opening alarm 30 6.21.2 ACC (Ignition / voltage) alarm 30 6.21.3 Acceleration Sensor Alarm 30 6.21.4 No GSM network alarm 31 6.22 Sleep 31 6.23 Check Status 32 6.24 Check IMEI 32 6.25 Local time setting 32 6.26 Reset Hardware 33 6.27 Configure parameters by USB 33 6.28 GPRS configuration for live real-time tracking 33 6.29 Activate Fuel value in GPRS data 36 6.30 Configure SMS managementr center number 36 6.31 Configure heartbeat package interval 36 6.32 Initialization 37 7 Package contents 37 8 Cautions 37 9 Troubleshooting 38

Minimum Order: 10 long tons

Contents 1 Summary 5 2 Applications 5 3 Hardware Description 5 4 Specifications 6 5 Start to use 6 5.1 Terminal installation 6 5.2 SIM card installation 7 5.3 Turn on the device 8 5.4 Device status light 8 5.5 GPRS configuration for live real-time tracking 8 5.6 Mobile APP 10 5.7 BAANOOL IOT’s Web Version 14 6 Function details 17 6.1 Changing password 17 6.2 Authorization 18 6.3 Single tracking 18 6.4 Continuous interval tracking 19 6.4.1 Limited times tracking at a time interval 19 6.4.2 Unlimited times tracking at a time interval 19 6.4.3 Unlimited times tracking at a distance interval 20 6.4.4 Smart tracking at both time and distance interval 20 6.4.5 Cancel interval tracking 20 6.5 Smart angle updating 20 6.6 GPS drift suppression 20 6.7 Exact street address 21 6.8 Location based service (LBS) / Cell-ID tracking 21 6.9 Auto answer 21 6.10 Forwarding incoming SMS messages 22 6.11 SIM Card Balance Enquiry 22 6.12 ACC ON/OFF Alert 23 6.13 Remote immobilizing 23 6.14 Fuel sensor calibrating 24 6.15 Configure times of alarm SMS 24 6.16 Alarms 25 6.16.1 Low battery alarm 25 6.16.2 Power disconnection alarm 25 6.16.3 Blind area alarm 25 6.16.4 SOS alarm 26 6.16.5 Geo-fence 26 6.16.6 Movement alarm 27 6.16.7 Over speed alarm 27 6.16.8 Fuel alarm 27 6.17 Remote control function (For G model) 28 6.18 Arming 28 6.19 Silent Arming 29 6.20 Disarming 29 6.21 Alarm function in arming state 30 6.21.1 Door opening alarm 30 6.21.2 ACC (Ignition / voltage) alarm 30 6.21.3 Acceleration Sensor Alarm 30 6.21.4 No GSM network alarm 31 6.22 Sleep 31 6.23 Check Status 32 6.24 Check IMEI 32 6.25 Local time setting 32 6.26 Reset Hardware 33 6.27 Configure parameters by USB 33 6.28 GPRS configuration for live real-time tracking 33 6.29 Activate Fuel value in GPRS data 36 6.30 Configure SMS managementr center number 36 6.31 Configure heartbeat package interval 36 6.32 Initialization 37 7 Package contents 37 8 Cautions 37 9 Troubleshooting 38

Minimum Order: 10 long tons

Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.

Minimum Order: 10 long tons

Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.

Minimum Order: 10 long tons

7.4.5Cancel interval tracking SMS command: nofix+password Tracker response: nofix ok Example: nofix123456 7.5Smart angle updating It will update positions automatically to web platform when the vehicle changes driving direction over a pre set angle value to make its trace following the actual road and seem better on the map. This function is only available in GPRS mode. SMS command: angle+password+space+angle value Tracker response: angle ok Example: angle123456 030 Note: The angle value must be 3 digits, and the default value is 30 degree. 7.6GPS drift suppression This function is deactivated by default. SMS command to activate: suppress+password Tracker response: suppress drift ok Example: suppress123456 If you stop driving the vehicle, tracker will stop updating its position and keep sending the same latitude and longitude, and when start to driving, the latitude and longitude will update automatically again. SMS command to deactivate: nosuppress+password Tracker response: nosuppress ok Example: nosuppress123456

Minimum Order: 10 long tons

7.4Continuous interval tracking 7.4.1 Limited times tracking at a time interval SMS command: fix030s600s005n+password Tracker response: It will update positions at 30 seconds interval when motion and 600 seconds when motionless for 5 times. Example: fix030s600s005n123456 Note: The numbers in the command must be 3 digits and maximum times allowed are 255 times. The interval unit in all fix command can be s (seconds), m (minutes) and h (hours) 7.4.2 Unlimited times tracking at a time interval SMS command: fix030s600s***n+password Tracker response: It will update positions at 30 seconds interval when motion and 600 seconds continuously when motionless. Example: fix030s600s***n123456 Note: The time interval must be more than 10 seconds. 7.4.3 Unlimited times tracking at a distance interval SMS command: Distance+password+space+distance value Tracker response: Distance ok Example: Distance123456 0050 Note: The distance unit is meter, and value must be 4 digits. 7.4.4 Smart tracking at both time and distance interval SMS command: fix030s600s***n+password+space+distance value Tracker response: It will update a position at 600 seconds interval when motionless, and update a position at 30 seconds when moving, besides, it will also update a position when move 200 meters away. Example: fix030s600s***n123456 0200

Minimum Order: 10 long tons