Air Cooling, Refrigerating & Heating

Description: 1. The 130 kW modular unit saves investments on water systems. Compared with two 65 kW modules, one 130 kW modular unit saves the investment on the pipeline and accessories of one water system. 2. Compared with a combination of two 65 kW modules, one 130 kW, modular unit saves the land area by 14%. 3. The 130 kW modules support seamless installation and save the land area by 30% compared with 65 kW modules when multiple modules are combined during installation. 4. Sixteen 130kW modules may be combined, which easily expands the capacity of an air-cooled modular unit from 130 kW to 2080 kW. 5. The unit inherits the advantages of the 65 kW module, and uses the precise flow control technologies by using electronic expansion valves and efficient plate-type heat exchangers. The system performs optimal matching to ensure that the energy efficiency of the unit is above the energy performance certification standard of. 6. The RoHS certified environment-friendly galvanized steel sheet and 120μm- thick orange-peel spraying endow the unit shell with anti-erosion, hard fall- off, and slow fading. This makes the unit work a long time. 7. The unit adopts high-performing inner grooved copper pipes provided by well- known suppliers, which help the refrigerant form liquid film on the inner walls of the pipes, greatly increasing the heat exchange efficiency. 8. Compared with the traditional air-cooled modular unit that uses a thermal expansion valve, EK air-cooled modular unit uses 500-step PMV electronic pulse for precise adjustment to implement precise PID control. The system implements real-time matching and precise water temperature control, fully improving the optimal performance of each component inside the system. This makes the unit operate steadily at any workload and automatically adapt to varying ambient temperatures, solving the oscillation issue of a cooling system. In addition, the temperature output of the system is more steady, and the indoor temperature is more balanced, improving comfort. 9. The genuine dual-system panel-type heat exchanger can bear a 3.0 MPa pressure at the water side, and provide the pressure bearing capability for a water system in a high building. Compared with a shell-and-tube heat exchanger, this heat exchanger delivers higher heat exchange efficiency, and provides a cleaner internal environment. Compared with a traditional back-to-back heat exchanger, it provides higher heat exchanger efficiency and delivers higher anti-freeze capability at partial workload. When operating at partial workload, it provides higher heat exchange efficiency. A standard configuration provides a water pressure drop switch to monitor the unit water flow in real time as well as precise anti-freeze control. 10. Different from a traditional secondary pumping system, the primary Pumping Variable Flow System features variable flows at the refrigerant side and workload side and shares one transducer pump group. Its flow may drop with the workload of the air conditioner, greatly saving the operating expenses for the chilled water pump of the air conditioning system. 11. The unit may send out 2-way valve water control signals to cut off chilled water. This enables automatic flow control for pumps in line with the transducer, which helps easily implement primary Pumping Variable Flow System. 12. It is applicable to projects where the cooling workload of the air conditioner changes greatly, and the air conditioner works at partial workload for a long time. 13. Compared with the secondary pumping system, it saves the initial investment on the cooling water pump and pipes at the primary pumping system and on the power distribution system, and requires a smaller area of the equipment room. 14. EK test center is accredited by the CNAS national test lab. The EKAC modular air-cooled heat pump units pass the tests for extreme conditions by the national test lab, including anti-erosion, exhaustion, and frequent start. This endows the unit with extremely high reliability. Each unit passes 100% reliability test before factory delivery for quality assurance. A standard configuration provides a water sieve and a water pressure drop switch, which ensures that the unit does not run when the water supply is short or cut off. 15. The unit provides 13 powerful built-in protection functions, including protection against high/low voltage of compressors, protection against phase loss or inversion of the power supply, protection against frequent startup, compressor over-current protection, compressor air exhaust temperature protection, protection against unit overheating, sensor fault protection, anti- freeze protection for cooling, anti-freeze protection for the water system in winter, water flow protection, and ambient temperature protection. 16. The fan uses low-noise axial blades driven by the motor in direct connection. The blades pass dynamic balance and static balance tests. The whole unit is designed with shock isolation and multi-plenum noise reduction. Fully hermetic volute low-noise compressors from famous vendors and efficient low- noise fans ensure leading-edge noise and vibration levels. With the help of noise spectrum analysis, components such as fan and motor are carefully compared, selected, and improved, and noises of the structure and pipes are reduced. 17. The unit adopts intelligent defrosting technologies for precise defrosting settings, which help make comprehensive judgment based on the ambient temperature and suction temperature. The unit saves energy as much as possible by automatically correcting the conditions for defrosting based on the change curve of the coil temperature and by taking defrosting conditions in previous periods into account. In this manner, the unit implements precise defrosting based on the actual conditions, ensuring maximum operation time for normal heating, and minimizing the fluctuation of hot water temperature due to defrosting. 18. Any EK slave module may become a master module upon switchover. Damage to the master module does not affect running of other modules. In addition, any combination may be formed by using modules of the same or different models. A system may consist of 16 modules. Products of other vendors support only a specific unit as the master module. Once the master module is damaged, the whole system cannot work properly. As a result, debugging and maintenance are difficult. 19. The unit adopts a micro computer control system with a large screen LCD, facilitating use. Each control system can dynamically monitor the running status of 16 units, and supports RS485 communication interfaces. The control system runs the Modbus protocol for cluster control.

Now heat semiconductor process fluids up to 210°C! Faster heatup: Single heater chamber sizes up to 18kW. Rapid installation: Customized plumbing connections Long heater life for reduced cost of ownership (COO): Patented heater gas purge system continuously removes any chemical permeation and ensures long element life. Long heater life and clean operating: Patented heater gas purge system continuously removes chemical permeation and ensures exceptionally long element life. This system also protects against any potential ionic contamination of the chemistry. Rugged construction: Thick walled chamber provides long service life in the harshest high temperature applications. Exceptionally clean performance: Thick fluoropolymersheath minimizes permeation. Element purge monitoring minimizes ionic contamination potential. Cleanroom assembly and testing ensures the highest manufacturing standards. Outstanding chemical compatibility: All fluoropolymerwetted parts compatible with virtually any chemistry. Excellent temperature stability: Low watt density design enables accurate control of process temperature.

Air cooler evaporative air conditioner plastic air duct What is the plastic evaporative cooler air duct? The air duct is specially designed and made for evaporative air coolers. The material of the evaporative air cooler air duct is PP plastic. Plastic air ducts have multiple sizes to match the air volume of the air cooler. Plastic air ducts have the advantages of corrosion resistance, rust resistance and aging resistance. Why the plastic air duct is better than galvanized air duct? 1. Lower product cost. Evaporative air cooler plastic air duct has been mass- produced to reduce product costs. Interfaces such as elbows and reducers of galvanized ducts still need to be customized according to the construction site. 2. Complete product size. The air volume of the evaporative air cooler is divided into 18000cmh\25000cmh\30000cmh. The plastic air duct has a complete range of sizes to match the air volume of the air cooler. 3. Lower shipping costs. Evaporative air cooler plastic air ducts can be stacked for storage or transport. Duct transport is smaller and less costly. How to size the evaporative cooler air duct? 1.30000cmh air cooler match 800*500mm air duct 2.18000-25000cmh air cooler match 650*450mm air duct 3.Pipes longer than 10 meters need to be reduced in size to increase wind pressure. The small size duct has 500*380mm. Scope of use of plastic evaporative cooler air duct? Evaporative air cooler ducts can be used in industrial plants and greenhouses, such as chemical plants, shoe factories, garment factories, hardware factories, mold shops, chicken coops, pig houses, cow sheds and vegetable greenhouses. Service 1. OEM Manufacturing: Design, Package, Logo,etc. 2. Inquiries are responded within 24 hours. 3.Should you have any questions, please feel free to contact us, we will offer professional solutions. 4.Feedback is highly appreciated. Contact Person: Ms. Alexis Sun Email: sale@fxairsolution.com Website: www.fxairsolution.com Phone: 0086 13360340046

Minimum Order: 10 long tons

FGB (SHANDONG) BEARING MFG CO., LTD. Which is a Professional R&D, production and sales Spherical Plain Bearing (Joint Bearing) manufacturer in China since 2004. The registered trademark is FGB. Sizes ranges from 20mm~320mm, including phosphate and non phosphate products. - Joint (Beef Eye) Bearings - Maintenance Free Radial Spherical Plain Bearings (GETX) - Maintenance Free Inclined Spherical Plain Bearings (GAC..F) - Maintenance Free Spherical Plain Bearings (GX..F) - Tie Rod Ends (Knuckle Heads) - Maintenance Free Tie Rod Ends (Knuckle Heads) 1. Spherical plain bearings : GE, GEH(GEG), GEZ, GE-C, GE-UK, GEEM, GEEW... 2. Rod ends bearings : GK, GF, GAS, GIHNK, GIHOK, GIHRK-DO... 3. Cylinder earring bearing : SK, SF, SIA, SIQ, SIR, SIRN, SIQG, SFEW... Mr. Leo Jiang Marketing and Sales Director WeChat / Whatsapp: +86-187 6957 2768 E-mail : leojiang@fgbearing.com

Minimum Order: 500

Easy Operation 2ton/Day Flake Ice Maker/Ice Maker Machine Main Features: 1. Flake Ice: Dry, pure, powder-less, not easy to block, its thickness is about 1.8mm~2.2mm, without edges or corners which will can product the cooling food, fish, seafood and other products. 2. Machine power supply: 3P/380V/50HZ,3P/380V/60HZ,3P/440V/60HZ 3. The ice storage bin is made of stainless steel and filled with insulation material to ensure that the ice does not melt for 24 hours. Decription: 1 .Whole processing is made by vertical lathe to ensure the precision up to 2 ounces; 2.Thermal insulation: foaming machine filling with imported polyurethane foam insulation. Better effect. 3. Be designed and produced with standard low-temperature pressure vessel manufacturing process, including surface treatment, heat treatment, gas-tight test, tensile & compression strength test, etc. 4.Ice blade: made of SUS304 material seamless steel tube and formed through only one time process. It's durable. Specification: Name Technical Data Ice production 2ton/24h Refrigeration capacity 11206 Kcal/h Evaporating temp. -20℃ Condensing Temp. 40℃ Ambient Temp. 35℃ Inlet water Temp. 20℃ Total Power 7.7kw Compressor Power 10HP Reducer Power 0.18KW Water pump Power 0.014KW Brine Pump 0.012KW Standard Power 3P-380V-50Hz Inlet water pressure 0.1Mpa－0.5Mpa Refrigerant R404A Flake ice Temp. -5℃ Feeding water tube size 1/2" Net weight 397kg Dimension of flake ice machine 1600mm×1100mm×1055mm

FGB (SHANDONG) BEARING MFG CO., LTD. Which is a Professional R&D, production and sales Spherical Plain Bearing (Joint Bearing) manufacturer in China. The registered trademark is FGB. Sizes ranges from 20mm~320mm, including phosphate and non phosphate products. - Joint (Beef Eye) Bearings - Maintenance Free Radial Spherical Plain Bearings (GETX) - Maintenance Free Inclined Spherical Plain Bearings (GAC..F) - Maintenance Free Spherical Plain Bearings (GX..F) - Tie Rod Ends (Knuckle Heads) - Maintenance Free Tie Rod Ends (Knuckle Heads) 1. Spherical plain bearings : GE, GEH(GEG), GEZ, GE-C, GE-UK, GEEM, GEEW... 2. Rod ends bearings : GK, GF, GAS, GIHNK, GIHOK, GIHRK-DO... 3. Cylinder earring bearing : SK, SF, SIA, SIQ, SIR, SIRN, SIQG, SFEW... Models:GE50ES GE50ES-2RS GE50DO-2RS ID: 50 mm OD: 75 mm Width: 35 / 28 mm Weight: 0.56 kg Brand:FGB GE20ES / GE20ES-2RS / GE20DO / GE20DO-2RS GE25ES / GE25ES-2RS / GE25DO / GE25DO-2RS GE30ES / GE30ES-2RS / GE30DO / GE30DO-2RS GE35ES / GE35ES-2RS / GE35DO / GE35DO-2RS GE40ES / GE40ES-2RS / GE40DO / GE40DO-2RS GE45ES / GE45ES-2RS / GE45DO / GE45DO-2RS GE50ES / GE50ES-2RS / GE50DO / GE50DO-2RS GE60ES / GE60ES-2RS / GE60DO / GE60DO-2RS GE70ES / GE70ES-2RS / GE70DO / GE70DO-2RS GE80ES / GE80ES-2RS / GE80DO / GE80DO-2RS GE90ES / GE90ES-2RS / GE90DO / GE90DO-2RS GE100ES / GE100ES-2RS / GE100DO / GE100DO-2RS GE110ES / GE110ES-2RS / GE110DO / GE110DO-2RS GE120ES / GE120ES-2RS / GE120DO / GE120DO-2RS GE140ES / GE140ES-2RS / GE140DO / GE140DO-2RS GE160ES / GE160ES-2RS / GE160DO / GE160DO-2RS If you need bearings, please feel free to contact me. Looking forward to your reply. Best wishes, Leo

Minimum Order: 50

Conections from DN25 to DN600 (1" to 24") Frames designed according to FEA and PED 2014/68/EU (EN13445) and ASME sec VIII, Div. 1 construction standards Plate materials: AISI 304/316L, titanium, SMO, Hastelloy* Gasket materials: EPDM-HT, NBR-HT, Viton*FKM Plate lengths up to 5.5 m (18 ft) Flow rates up to 7,200 m3/h (31,700 gpm) Working pressure up to 35 bar (500 psi) Working temperatures from -20 °C to 180 °C (-4 °F to 356 °F) *Other materials are available upon request. Aiprel provide all models of Sondex plates and gaskets replacements.

Triple glass Swing doors Inside embossed alluminum sheet outside black powder coated steel sheet Double layer glazed with outside thoughened glass​ Make the product impact resistance better +2℃~+8 ℃ temperature range Brand compressor(optional) Climate class ST Product name Triple glass swing doors back bar cooler Model LG330Hc Product size 1350*535*830mm Temperature Range +2~+8℃ Cooling mode fan cooling Power 220W Net weight/gross weight 76/81 Voltage 220v/50Hz/60Hz(optional) Volume 330L Ambient temperature 35°C Compressor brand compressor(optional) Refrigerant R134A

Walk-In Cold Storage, Walk In Commercial Cold Room, White Colorbond Material Or 304 Stainless Steel Freezer And Coolroom Our coldroom panels are made of different materials with advanced equipments and leading technology of the industry. Our comprehensive products have absolute advantages, including performance,environmental protection, aesthetics, competitive price etc. Features: 1. Combined panels with camlocks and yin-yan mounted, easy to intall. 2. Cold room panels with density reach up at 42KG. 3. We can design panels with hidden floor and ceiling if needed 4. All room corners can be rounded corner radius 10mm in accordance with hygienic-sanitary regulations. 5. All doors included heaters inside to avoid door frozen and can't open it. 6. All doors around with rubbles to ensure sealing property. 7. Light weight, high strength, meeting the demand of outside loading. 8. No mildow, worm resisting.

The hardening heat treatment furnace is a kind of periodic working machine, mainly used in heating treatment of small metal workpieces, chemical analysis, thermocouple checking, grinding wheel sintering, diamond sintering, smelting or purifying of the rare and precious metals and other scientific experiments. Our machines can be applied in universities and colleges, scientific research institutes, mining enterprises, quality and technology supervision agencies, and other labs. The electric heating chamber aluminum aging furnace is made by welding high- quality cold-rolled plates. The hearth is made of highly heat-resistance materials, such as refractory brick, Mullite brick or ceramic fiber. The heating parts consist of high-temperature resistance wire, silicon carbide rod or MoSi2 rod. We use lightweight bricks or silicon wool felt as insulation materials, and the surface is covered by high-temperature paint. Our box type multipurpose furnace uses PID smart meters to control the temperature, and use high precision thermocouple to ensure the accuracy of temperature adjustment, so we can provide more reliable data for the lab experiments. The heating components of our electric box furnace are all of high quality, they will last longer and serve you well.

Minimum Order: 1 bags

The 250kg iron steel stainless steel melting furnace is mainly used in smelting or melting all kinds of metal. That include iron, steel, aluminum, copper, brass, bronze, silver, gold, etc. It can also be used in the heating treatment of metal. Our electric induction metal melting furnace can be safely applied in all kinds of workplaces and even at home. You can use them at your house, in the exhibition room, in the laboratory, in your factory workshop or in your store. Main Features 1. High efficiency, you just need a few minutes to melt a small batch of metal. 2. Energy-savinig, high stability, safe. 3. 24 hours continuous work ability. 4. All-solid-state IGBT frequency conversion and function adjustment, automatic frequency conversion tracking. 5. Automatic protection against all sorts of functional deficiency to ensure equipment reliability. 6. Manually and automatically adjust to improve the heating quality of the workpiece. 7. Customizable capacity to meet your production needs. Besides high functionality and high efficiency, our blast furnace for iron ore melting can also be easily operated. The machines can pair with all sorts of crucible to melt different metal, from clay graphite crucible, magnesium oxide crucible, to silicon carbide crucible.

Small fire resistance test furnace is mainly used in chemical analysis, thermocouple checking, grinding wheel sintering, diamond sintering, smelting or purifying of the rare and precious metal, heat treatment of metal sintering process research and other scientific experiments. Our machines can be applied in universities and colleges, scientific research institutes, medical and health centers, petroleum chemical industries, mining enterprises, quality and technology supervision agencies, and other laboratories. The 1000 degrees resistance furnace is made by welding high-quality cold-rolled plates. The hearth is made of highly heat-resistance materials, such as refractory brick, Mullite brick and ceramic fiber. The heating parts consist of high-temperature resistance wire, silicon carbide rod or silicon molybdenum rod. We use lightweight bricks or silicon wool felt as insulation materials, and the surface is covered by high-temperature paint. Our electric resistance heating furnace uses PID smart meter to control the temperature, and use high precision thermocouple to ensure the accuracy of temperature control, so we can provide more reliable data for the lab experiments. The heating components of our electric box furnace are all of high quality, so they last longer.

The melting electric furnace is mainly used in smelting or melting all kinds of metal. That include iron, steel, aluminum, copper, brass, bronze, silver, gold, etc. It can also be used in the heating treatment of metal. Our electric induction metal melting furnace can be safely applied in all kinds of workplaces and even at home. You can use them at your house, in the exhibition room, in the laboratory, in your factory workshop or in your store. Main Features 1. High efficiency, you just need a few minutes to melt a small batch of metal. 2. Energy-savinig, high stability, safe. 3. 24 hours continuous work ability. 4. All-solid-state IGBT frequency conversion and function adjustment, automatic frequency conversion tracking. 5. Automatic protection against all sorts of functional deficiency to ensure equipment reliability. 6. Manually and automatically adjust to improve the heating quality of the workpiece. 7. Customizable capacity to meet your production needs. Besides high functionality and high efficiency, our metal melting furnace can also be easily operated. The machines can pair with all sorts of crucible to melt different metal, from clay graphite crucible, magnesium oxide crucible, to silicon carbide crucible.

The melting electric furnace for gold silver is mainly used in smelting or melting all kinds of metal. That include iron, steel, aluminum, copper, brass, bronze, silver, gold, etc. It can also be used in the heating treatment of metal. Our electric induction metal melting furnace can be safely applied in all kinds of workplaces and even at home. You can use them at your house, in the exhibition room, in the laboratory, in your factory workshop or in your store. Main Features 1. High efficiency, you just need a few minutes to melt a small batch of metal. 2. Energy-savinig, high stability, safe. 3. 24 hours continuous work ability. 4. All-solid-state IGBT frequency conversion and function adjustment, automatic frequency conversion tracking. 5. Automatic protection against all sorts of functional deficiency to ensure equipment reliability. 6. Manually and automatically adjust to improve the heating quality of the workpiece. 7. Customizable capacity to meet your production needs. Besides high functionality and high efficiency, our silver melting furnace can also be easily operated. The machines can pair with all sorts of crucible to melt different metal, from clay graphite crucible, magnesium oxide crucible, to silicon carbide crucible.