Air Cooling, Refrigerating & Heating

Product Introduction: ATF series box type air supply and exhaust fan has the advantages of small volume, convenient installation and maintenance, reasonable structure, and single plate backward inclined arc blade impeller blade. It is applicable to air supply, exhaust, ventilation, supporting and supporting fire protection projects in high-end hotels, civil buildings, department stores, dance halls, cinemas, gymnasiums and other places. Product parameters: Type: Axial flow fan Material: carbon steel Wind pressure: 133~1589 Pa Air volume: 1558~23124 CMH Power: 0.75~7.5 kw Speed: 960-2900 rpm

Minimum Order: 1 bags

Product Introduction: 11-62 is a new product improved on the base of 11-62-A type centrifugal fan ,which has a larger volumn , a lower noise than 1162-A type . Featured by firm structure , new design , nice appearance , etc , the product is an ideal equipment for ventilation in modern hotel restaurant as well as air-condition unit . The transporting medium is air or other non-spontaneous-combustion and non-explosive-combustion air with no harm to human . The air transferred shall not contain any adhesive material , with the temperature no higher than 80℃. Product parameters: Type: E-type multi wing centrifugal fan Material: carbon steel Wind pressure: 265~1478 Pa Air volume: 1959~36000 CMH Power: 1.1-30 KW Speed: 560~1420 rpm

Minimum Order: 1 bags

Product Introduction: JS exhaust fan is featured by low noise , electricity saving , large air flow , easy installation , which is an ideal choice for sunstroke prevention anc ventilation in occasions such as various warehouses , offices , flower greenhouses & poultry houses . The product is used to transport nonflammable , low-corrosive gases with the temperature no higher than 50℃ , relative humidity no greater than 80% and the quantity of dust and solid impurities 100mg / m³. Product parameters: Type: Square negative pressure fan Material: carbon steel Air volume: 7200~44500 CMH Power: 0.25~1.1 KW Speed: 460~1400 rpm

Minimum Order: 1 bags

Product Introduction: Featured by high efficiency , low noise , wide use and steady pressure curve , 4-72 type is an ideal equipment for gas recycling indoor ventilation & coolingin mining enterprises , coliseum opera house , basement , large and small hotels ,restaurants , shopping malls and major building . The transporting medium is air or other non-spontaneous-combustion and non- explosive-combustion air with no harm to human . With an anti-explode motor , B4-72 can use for ventilation of volatile flammable gases . The air transferred shall not containany adhesive material , dust and grain and the concentration shall not exceed 150mg /m³ , with the temperature no higher than 80℃ . Product parameters: Type: B-type series centrifugal fan Material: carbon steel Wind pressure: 299~3157 Pa Air volume: 35985~221730 CMH Power: 11-200 KW Speed: 250~900 rpm

Minimum Order: 1 bags

Puduct Name: JQZ-5A-11KW-2P with 1604-4858 CMH volume 4170-2291 pressure POPULA Broken Edge Paper Centrifugal Fan High Pressure Product Introduction: Featured by firm and rational structure , large volume , high pressure , stable performance ,the safe and practical fan can solve the problem with collecting and handling paper edge .This product can collect and cut the paper edge to pieces , than transport it by air to dumps so as to improve the operating environment . The air transported shall not becorrosive and flammable with a temperature no greater than 80℃ , and shreddingthickness shall not exceed 350g / m³. Product parameters: Type: Broken edge paper conveyor fan Material: Carbon steel Wind pressure: 1467~6233 Pa Air volume: 821-11680 CMH Power: 3-37 KW Speed: 2130~2900 rpm

Minimum Order: 1 bags

An Integrated Fixed Speed Screw Air Compressor is a highly efficient and reliable solution for industrial air compression needs. Designed with a fixed- speed motor, it ensures consistent airflow and pressure, making it ideal for applications that require a steady and uninterrupted air supply. This type of compressor integrates essential components such as the air dryer, air filter, and oil separator into one compact unit, reducing installation space and maintenance costs. Its robust construction guarantees long-term durability and performance, even in demanding environments. Product Parameters Power KW/HP Power HP Pressure MPa Air Delivery m³/min Start  Mode Drive Mode Compression Level Noise db(A) Voltage V/PH/HZ Dimensions (L*W*H） mm Outlet Diameter imch/mm 15KW 20HP 0.8 2.2 Y- Direct Drive Single stage 68±5 380V/50HZ/3HP 1450*750*457 G3/4

Power KW Power HP Pressure MPa Volume flow m³/min Start Mode Drive Mode Compression Level Noise db(A) Voltage V/PH/HZ Dimensions (L*W*H） mm Outlet Diameter imch/mm 15KW 20HP 0.8 2.2 VSD Soft Start Direct Drive Single stage 62±5 380V/50HZ/3HP 1450*750*457 G3/4 Product Advantages The MDW-15KW Energy Saving 4-in-1 All In One Screw Air Compressor is a compact, integrated system that combines an air compressor, dryer, filter, and receiver. It's designed for energy efficiency and reliable performance in industrial settings.

Power KW Power HP Pressure MPa Volume flow m³/min Start Mode Drive Mode Compression Level Noise db(A) Voltage V/PH/HZ Dimensions (L*W*H） mm Outlet Diameter imch/mm 11KW 15HP 0.8 1.6 VSD Soft Start Direct Drive Single stage 62±5 380V/50HZ/3HP 1450*750*457 G3/4 The 11kW High-Efficiency Variable Speed Air Compressors are equipped with an Integrated Variable Speed Screw Air Compressor, offering superior energy efficiency and precise air flow control for industrial applications. 1. Embedded high-efficiency energy-saving cold dryer: Adopting cutting-edge refrigeration technology, it ensures that the dew point of the outlet pressure is stable at 2~5℃, effectively removes moisture from compressed air, protects downstream equipment and improves product quality. At the same time, its compact structure integrates perfectly with the system, saves space and improves overall stability and reliability.

Power KW Power HP Pressure MPa Volume flow m³/min Start Mode Drive Mode Compression Level Noise db(A) Voltage V/PH/HZ Dimensions (L*W*H） mm Outlet Diameter imch/mm 7.5KW 10HP 0.8 1.1 VSD Soft Start Direct Drive Single stage 60±5 380V/50HZ/3HP 1450*700*1334 G1/2 Product Advantages 7.5kW All in one variable speed screw air compressor characterised by compact structure and flexible movement, the integrated design of the air compressor system, with tight connection between components and convenient installation, has become an important tool for enterprises to realise green production and reduce operating costs with its high efficiency, energy saving, convenience and flexibility. Choosing it is choosing an efficient, energy-saving and environmentally friendly production method, contributing to a green future together.

The permanent magnet frequency conversion air compressor adopts high efficiency VSD compressor, the average energy saving is up to 35%. The body of the compressor is waterproof, dustproof and soundproof, with protection class up to IP55. The excellent performance and reliability of permanent magnet variable speed air compressors are ideal for ensuring energy saving and sustainable production. Product Parameters Power KW Power HP Pressure MPa Volume flow m³/min Start Mode Drive Mode Cooling  Compression Level Noise db(A) Voltage V/PH/HZ Weight KG Dimensions (L*W*H） mm Outlet Diameter imch/mm 7.5KW 10HP 0.7 0.36-1.3 VSD Soft Start Integrated Direct Drive Air Cooling Single stage 62±2 380V/50HZ 190 890*650*830 G3/4＂ 0.8 0.33-1.1 1 0.28-0.95 11KW 15HP 0.7 0.51-1.7 VSD Soft Start Integrated Direct Drive Air Cooling Single stage 62±2 380V/50HZ 280 1000*700*1000 G3/4＂ 0.8 0.48-1.6 1 0.42-1.4

Grandmfg® Steel Fused window sights nickel plated, Steel fused sight windows nickel plated, Steel Flange fused glass oil sight glass nickel plated, stainless steel fused sight glass, Fused glass style sight windows, Steel Sintered Sight Glass Nickel plated, oil sight glass plugs, round observation ports, NPT sight glass windows, reservoir oil sight glass, hydraulic tank oil sight glass Feature glass to metal bond for utmost reliability. Plated steel bodies have convenient hex wrench surface. Connection are Standard NPT, UNC, UNF and BSP (G thread) from 1/4" to 2". Windows are clear, ripple free, and flush with the front face, Having no recess on which dirt might collect. Specifications: Service: Compatible gases and liquids. Window: nature glass. Body: plated steed and stainless steel 304, SS316 Temperature: -30 Celsius Degree to 260 Celsius Degree (500 F). Pressure: 125 psig (8.6bar) Connections: NPTF, NPT, UNC, UNF, Metric and BSP (G thread) Size: 1/4" to 2" MOQ: 1000 Pcs each size Delivery time: 20 days. Usage:  Pump, liquid Thin-wall container, Radiator, Hydraulic oil reservoir, oil receivers, oil level regulator, oil separator, Gearboxes, Speed Reducer, screw Compressor, refrigerator, cooling & heating exchange, Power Transmission, fluid sighting on hydraulic tanks, pressure vessels, reservoirs, packaged power equipment, hydraulic lines and dipping. Their use can be applied to any application where oil or fluid inspection is essential.

Minimum Order: 200

Grandmfg® Dome oil level sight glass have a better function of sight view.You can easily observe the level of medium. 1)TEMPERATURE & PRESSURE: The brass dome oil sight gauge can work under pressure 145 PSI (10 bar) and temperature 392 F. The dome sight window is qualified to pass strict pressure and temperature tests. 2)APPLICATION: 3)The dome oil sight plug is a kind of liquid indicator used in tanks, air compressors, pumps, piping system, automotive industries, lab equipments, bearing housing and mixers etc. The dome oil level indicator has good viewport for visual Inspection of water, oil and gas. 3)Material: The 1/2 NPT NPT dome sight glass is made of solid brass, The domed glass is borosilicate glass, The O-ring is FKM. Our QC department do 100% quality inspection on the brass dome sight glass before delivery. We will do 100% refund if the dome sight plug part is defective. Your valuable suggestions and advice will be greatly appreciated by our team.

Minimum Order: 200

Current 2.7A Voltage 230V Sound Pressure 53db Max airflow 80m³/h Max Vacuum -110mbar Max Pressure 110mbar Stage Single Stage Weight 11kg Material Aluminum Color Silver Customized support OEM Customized support ODM Application Air Blower Pressure High Pressure Power Source Electric Blower Place of Origin CN;SHN Warranty 1 year Rated Voltage 230V Brand Name Greentech Model Number 2RB 210 A11 Price USD67

Minimum Order: 5 dozens

Grandmfg® Male Thread Tubular Brass Tube Oil level indicator oil level gauge with glass tube Housing: Brass Tube. Tube: Real glass tube. O-Ring and flat gaskets: NBR Rubber. Thread size: M10x1, M12x1.5, M14x1.5, M16x1.5, G1/4”, G3/8”, G1/2”, NPT1/4, NPT3/8, NPT1/2” Temperature resistant: -20’C to 120 ‘C. / 0’F to 260 ‘F High of two bolt: 80mm to 600mm Usage:  Pump, Thin-wall container, Radiator, Hydraulic reservoir, receivers, Gearboxes, Speed Reducer, Compressor and Power Transmission.

Minimum Order: 200