Machinery, Equipment & Tools

DL-3 electric air heater is consists of 7 parts: electric heater + insulation box + fan + fresh air damper + waste heat recovery device + dehumidification fan + control system. It is specially designed for supporting downflow drying room/heating rooms. After convert electrical energy into heart through by the electric heater, it´s mixed with recycle or fresh air, under the action of the fan, it is discharged from the upper outlet into the drying room or heating space. Then cooled air pass through the lower air outlet for secondary heating and continuous circulation. And when the humidity of circulating air reaches the emission standard, the dehumidification fan and fresh air damper will start simultaneously. The exhausted moisture and fresh air implement sufficient heat exchange in the waste heat recovery device, so the moisture is discharged and the fresh air with recovered heat enter the circulation system. 4. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel electric heating finned tube, durable 4. Automatic control system, group start and close, low load, precise temperature control 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. Integrating the dehumidification and fresh air system, heat loss is extremely small through by the waste heat recovery device. 8. Automatically replenish fresh air

Minimum Order: 1 bags

DL-2 electric air heater is consists with 6 parts: electric heater + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by electric heater. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. 4、Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel electric heating finned tube, durable 4. Automatic control system, group start and close, low load, precise temperature control 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air

Minimum Order: 1 bags

My name is susan and I work for XT Intelligent co.,ltd and I would like to take a moment of time to introduce you to our drying system. Our High Efficiency Multi Phase (flowers, leaves such as Rose,pepper etc) dryer combines established drying and processing techniques into a unique attrition flash drying process that keeps your items undamaged. This provides a timely and cost-effective means of stabilizing your valuable harvest before mold, mildew or composting can occur, allowing for future processing at a pace you determine. We design systems to your requirements, let us know your harvested moisture level is (%) as well as your capacity requirements, in “wet/harvested hemp in” lbs/hour and we will provide dryer budget estimates. There is more information, pictures and video at our website. My contact information is below, I would enjoy learning about your farm, call me if you have a few minutes to discuss your drying requirements. All the best, Susan Zheng XT Intelligence Technology Co.,Ltd E-mail : Susan205060@hotmail.com Wechat:+86 13671955713 Skype: Susan205060 Cell Phone: 0086-136 7195 5713 https://www.facebook.com/BELTDRYERMANU , FACTURER (20+) UL/CE parts belt dryer /box dryer Manufacturer - XT Facebook

We are the professional OEM manufactuer for the UL/CE belt dryer and box dryer. Attached you can find machine pictures and pls let us know if you have interest to know more details. You can tell us your application / capacity request /voltage /frequency etc. Below pls find some basic information about us: 1 - More than 15 years' experience in dryers production line. 2 - We have solid experience to export to USA / UK / New Zealand market etc. 2 - The advantages for our equipment are : heat recycle using and we provide UL certified parts or CE certified parts for the production line. 4-We use international top brand for key parts such as Siemens screen + OILON Burner etc. Testimonials from our existing UK client : The dryer is efficient in drying the flower biomass delicately enough to keep the valuable terpin profiles that we want for extraction, and dry it enough to be stored without having problems with moisture left in the biomass whilst in storage. Service: we have had good service and can always get hold of someone for assistance if required. As of now, we have not had any problems with the function or operation of the dryer. We successfully harvested and dried over 4 tonnes of flower material last season. Bdgs&Tks, Susan Zheng XT Intelligence Technology Co.,Ltd E-mail : Susan205060@hotmail.com Wechat:+86 13671955713 Skype: Susan205060 Cell Phone: 0086-136 7195 5713 https://www.facebook.com/BELTDRYERMANU , FACTURER (20+) UL/CE parts belt dryer /box dryer Manufacturer - XT Facebook

My name is susan and I work for XT Intelligent co.,ltd and I would like to take a moment of time to introduce you to our drying system. Our High Efficiency Multi Phase (flowers, leaves such as Rose,pepper etc) dryer combines established drying and processing techniques into a unique attrition flash drying process that keeps your items undamaged. This provides a timely and cost-effective means of stabilizing your valuable harvest before mold, mildew or composting can occur, allowing for future processing at a pace you determine. We design systems to your requirements, let us know your harvested moisture level is (%) as well as your capacity requirements, in “wet/harvested hemp in” lbs/hour and we will provide dryer budget estimates. There is more information, pictures and video at our website. My contact information is below, I would enjoy learning about your farm, call me if you have a few minutes to discuss your drying requirements. All the best, Susan Zheng XT Intelligence Technology Co.,Ltd E-mail : Susan205060@hotmail.com Wechat:+86 13671955713 Skype: Susan205060 Cell Phone: 0086-136 7195 5713 https://www.facebook.com/BELTDRYERMANU , FACTURER (20+) UL/CE parts belt dryer /box dryer Manufacturer - XT Facebook

Agricultural Machinery Display SPD-043-Bx Product Description SPD-043-B is an economical display developed by SonnePower, adopting a 4.3-inch LCD screen and designed based on CoDeSys 3.5 programming platform. The product has a number of outstanding features, suitable for a variety of harsh environments in the field of construction machinery, sanitation equipment, mobile equipment, heavy equipment and so on. The SonnePower display has a resolution of 480*272, which can present delicate and clear images. Adopting 24-bit colour screen technology, the colour is vivid and rich, providing users with a better visual experience. The brightness reaches more than 400cd/m2, which can maintain good visibility even under strong light. · High-performance 32-bit MCU providing excellent computing and processing capabilities. · High-definition display: Equipped with a 480*272 resolution screen, featuring a contrast ratio of 450 and a brightness of ≥400cd/m2, delivering clear and bright image display. · 8-channel IO resources with high port multiplexing rate: · 2 CAN interfaces with support for Codesys 3.5 programming, enabling flexible communication and control functions. · Standard RS232 communication port with configurable baud rate: It provides 1 standard RS232 communication port with configurable baud rate, facilitating serial communication with other devices.

CAN Bus Display SPD-043-Ax Product Description The SPD-043-Ax series is a 4.3’ CAN Bus display developed by SonnePower. It is a display screen based on Codesys 3.5 programming. The product features a screen resolution of 480*272, a contrast ratio of 450, and a brightness equal to or greater than 400cd/m2. It has 2 CAN bus interfaces, 1 RS232 serial port for communication, 8 IO resources, and high port multiplexing. In addition, this Mobile machinery display has the advantages of compact size, high integration, and fast response speed. It can operate in harsh environments such as wide temperature ranges, high humidity, strong vibrations, and impacts. It is widely used in various fields, including engineering machinery, sanitation equipment, mobile devices, and heavy-duty equipment. 32-bit high-performance MCU 480 * 272 resolution, 450 contrast, ≥ 400cd/m2 brightness 8 channels IO resources with high port reuse rate 2 channels CAN, supporting Codesys3.5 programming 1 standard RS232 communication port, Baud configurable All input ports support incorrect power and ground connections All output ports are equipped with short circuit and overheat protection Protection level: IP65

Modular controller for construction machinery SPC-SFMC-X2214A Product Description The SPC-SFMC-X2214A modular controller is an advanced controller designed for construction machinery vehicles and is fully developed by SonnePower. The SPC-SFMC-X2214A modular controller has a wide temperature range and wide voltage input, which makes it suitable for various harsh working environments. The controller operates stably in both extreme high and low temperature conditions. In addition, it has excellent vibration resistance, enabling it to work reliably in vibration-prone construction machinery environments. The protection level of this product has reached IP67, which means it has excellent dust and water resistance performance. Whether facing dusty construction sites or wet environments, the SPC-SFMC-X2214A modular controller will remain operational and protect the internal electronics from damage. The SPC-SFMC-X2214A modular controller is programmable and can be customized according to the specific needs of construction machinery. It provides flexible interfaces and communication protocols, enabling seamless integration with various sensors, actuators, and external devices, achieving precise motion control and intelligent functions. *High integration and abundant resources *D+ function and start/stop detection support *All ports support misconnection of power supply and ground, and the output port has short-circuit and overheat protection *Open circuit detection function and fault diagnosis facilities

Off-Highway Vehicle Controller SPC-SFMC-X2024G Product Description The X2024G off-highway vehicle controller is developed by SonnePower to provide an advanced control solution for a wide range of mobile applications. Whether in design, integration or application, the X2024G Off-Highway Vehicle controller demonstrates excellent capabilities. Equipped with 2 CAN buses and 1 serial 232 bus, it provides the system with multiple communication interfaces to meet the needs of different application scenarios. In addition, it has 44 IO resources for a wide range of input and output functions, providing greater flexibility and expandability to meet complex control requirements. The X2024G off-highway vehicle controller has a high level of protection and is capable of reliable operation in harsh environments. It can performance even under extreme temperature, humidity or vibration conditions. The high level of integration is another highlight of the X2024G off-highway vehicle controller. Its compact size and versatile interface design allow it to be easily integrated into a variety of mobile applications. In addition, it supports a wide range of communication protocols and programming languages, providing easy development and integration. Supports CoDeSys 3.5 programming 44 input, high port multiplexing rate 2 AB quadrature pulse acquisition 2 CAN, supports CANOpen/SAEJ1939/custom protocols 1 serial port with settable baud rate support

Off-Highway Vehicle Controller SPC-SFMC-X0402A Product Description The SPC-SFMC-X0402A is a programmable controller developed on the CoDeSys 3.5 software platform. The controller programming complies with the IEC-61131-3 standard, allowing users to develop application programs using the CoDeSys 3.5 software. Designed specifically for mobile vehicles and construction machinery, the SPC- SFMC-X0402A is capable of withstanding harsh working environments characterized by large temperature variations, high vibrations, strong impacts, and intense electromagnetic interference. The SPC-SFMC-X0402A finds its primary applications in heavy-duty vehicles, construction machinery, crushing equipment, agricultural machinery, and sanitation equipment. Power supply 8-32VDC Communication 3×CAN 1×RS232 Programming environment CoDeSys 3.5 Total IO 4(4 inputs/2 Outputs） 4×DIH/AIU 2×AII 2×DOH/PWMH

1hp Aerator 1hp Fish Farming Aquaculture Aerator Paddle Wheel Areators Aerating A Pond With the continuous development of aquaculture fisheries, intensive high- yielding aquaculture technology has been widely used, fishery farming increased significantly. In the process of aquaculture production increase, aerator has become an essential equipment to achieve high-yield fisheries intensive, plays an important role in the development of fishery economy. Reasonable use of oxygen machine can effectively increase the dissolved oxygen in the pool water, accelerate the pond water body material circulation, reduce or eliminate harmful substances, and promote plankton breeding. For the prevention and mitigation of fish floating head, to prevent flooding and improve pond water quality conditions, increase the amount of fish fed and increase yield and so have a good role in promoting. Because of its light, easy to operate and single aerator function, it is generally suitable for the water depth below 0.7 meters, the area below 0.6 mu of fish fry breeding ponds or greenhouse ponds. With the continuous refinement of the fishery demand and the continuous improvement of the aerator machine technology, there are many new aerator machine, such as: spurting aerator machine, spray aerator machine and other specifications of the aerator machine.

A PTO (Power Take-Off) driveline, also known as a PTO shaft or PTO assembly, is a mechanical component used to transfer power from a power source, such as an engine or transmission, to an attached implement or machinery. It is commonly found in agricultural, industrial, and commercial applications. The PTO driveline consists of several key components: 1. PTO Shaft: This is a rotating shaft that connects the power source to the implement. It is usually telescopic or collapsible, allowing for adjustment of length to accommodate different equipment configurations. 1. Universal Joints: These are mechanical joints used to connect and transmit power between the PTO shaft sections while allowing for angular movement. Universal joints accommodate misalignment and provide flexibility during operation. 1. Safety Shield: A safety shield, often made of metal or plastic, covers the rotating PTO shaft to prevent accidental contact and protect against entanglement. Safety shields are crucial for operator safety. 1. PTO Coupling: The PTO coupling is the connection point between the power source and the implement. It typically consists of a male and female coupling that securely locks together to transmit power. The PTO driveline enables the transfer of rotary power from the power source to various implements, such as mowers, balers, pumps, or spreaders. It allows the power source to drive the implement's mechanisms or rotating parts, enabling them to perform their intended functions. It is important to handle and maintain PTO drivelines with care, ensuring proper alignment, lubrication, and safety precautions. Operator safety is paramount, and it is essential to follow manufacturer guidelines and safety recommendations when working with PTO drivelines.

Minimum Order: 5 dozens

it is generally recommended and often required by law to use safety chains when using a 445 pintle hitch for towing. Safety chains provide an additional level of security and help prevent accidents or damage in the event of a hitch failure or detachment. Safety chains are typically attached from the towing vehicle to the trailer, creating a secondary connection. In the event of a hitch failure, the safety chains act as a backup, keeping the trailer connected to the towing vehicle and reducing the risk of complete separation. When using safety chains with a 445 pintle hitch, it is important to ensure they are properly installed and securely attached. The chains should be crossed underneath the hitch in an "X" pattern, which helps provide better control and stability if the primary hitch connection fails. It is also important to maintain an appropriate amount of slack in the chains to allow for turns and maneuvers while still ensuring they are not excessively loose. Specific regulations regarding safety chain requirements may vary by jurisdiction, so it is important to familiarize yourself with the towing laws and regulations in your area to ensure compliance and safe towing practices.

Minimum Order: 100

A X348 conveyor chain is a type of riveted conveyor chain that is commonly used in overhead conveyor systems. The "X348" designation refers to the specific dimensions and design of the chain. The chain consists of a series of interconnected links, typically made of steel, that form a continuous loop. These links are connected by pins and retainers, providing strength and stability to the chain. The X348 conveyor chain is known for its durability and reliability, making it suitable for heavy-duty applications. It is often used in industries such as automotive manufacturing, material handling, and warehousing. The chain's design allows for smooth and efficient movement of loads along the conveyor line. The X348 chain features a pitch of 3 inches (76.2 mm), with each link having a width of 1.6 inches (40.6 mm). The chain's construction includes specially designed attachments that can be added to carry different types of loads or perform specific functions, such as gripping or lifting. With its robust construction and versatility, the X348 conveyor chain is a popular choice for conveying heavy or bulky items in various industrial settings. Its reliable performance and adaptability contribute to increased productivity and streamlined material handling processes.

Minimum Order: 100