Agricultural Equipment

This brush cutter BG330 is widely used in the harvesting of grassland pasture, the pruning of garden lawn weeds, single-cylinder two-stroke engine equipped with mixed oil, mature technology, high power output, can meet most of your garden requirements. Steel chassis support for better protection of the fuel tank and more stable machine placement. Because of its extremely high cost performance, it is deeply loved by the majority of users.

Minimum Order: 50

What is The Chicken Feed Mill Plant? The complete chicken feed production line uses corn, wheat, soybean, grain, soybean meal, cottonseed meal, stone powder, premix, and other biomass as raw materials to produce pellet feed. The process of our automatic chicken feed production line includes grain hammer mills, conveyors, mixers, chicken feed pellets, coolers, pulverizers, screening machines, automatic packaging machines, etc. The different diameters of feed pellets can be produced according to your needs. The use of chicken feed pellets in chicken farms can greatly reduce chicken feed waste, improve feed utilization, kill harmful parasites, and reduce the probability of chicken disease. In addition, the pellet feed is easier to transport and store, and has good palatability, making it a good choice for chicken farms. The chicken feed pellet mill machine has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the chicken feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service. Some Questions About the Chicken Feed Mill Plant 1. Who is Suitable for This Chicken Feed Mill Plant? This chicken feed mill plant is specially designed for farmers, animal farm plants, animal feed suppliers, etc. 2. What Raw Material Can Use in The Chicken Feed Mill Plant? Chicken feed mill plant raw materials include corn/maize, wheat, grass, alfalfa, oilseed meal & cakes, pasture, bone meal, microelements, etc., and other kinds of raw materials, such as premix, vitamins, wheat bran, salt and other. Different formulations can be made according to different formulas and the needs of the animals being farmed. 3. What Kind of Chicken Feed Pellet Production Line Can Produce? This feed pellet production line can produce feed for meat chicken, broilers, laying hens, small baby chicken feed, cattle feed, pig feed, duck feed, sheep feed, poultry feed, livestock feed, goat feed, etc. Such as 2-4mm diameter chick feed pellets and pig feed pellets. 2-5mm rabbit feed pellets, 4-8mm cattle or sheep feed pellets. This feed pellet mill with ring dies, makes pellets of 2-10mm in diameter, the pellet size can be changed with our feed pellet machine by adjusting the die. 4. Why Choose Our Chicken Feed Production Line? Widely Applications: This chicken feed pellet mill plant can make feeds for chicken, broiler, hen, poultry, livestock, sheep, pig, cattle, duck, and other animals, it makes pellets of 2- 12mm diameter, and the pellet size is can be changed with our feed pellet machine by adjusting die. Small Investment: the compact design of this feed mill plant can reduce the investment in workshops. Low Installation Cost: our chicken feed production line comes with detailed installation and commissioning instructions, it is easy to install the machine, and you can use it immediately after the machine is installed. Low Production Cost: The chicken feed factory only needs a few production workers to complete the production operation. With less labor and lower production costs, your profits will increase. 5. What Can We Do for You? We can provide the project design, flow chart, feed-making machine manufacturer, the project installation and commission, your staff training, after-sales service, etc. Also, our professional install team will serve you if you need it.

Minimum Order: 1 bags

Mainly used in paddy fields and tall crops. According to the modular concept, when necessary, hilly mountain high clearance wheeled tractor can be switched to a standard tractor or a low-ground clearance tractor by switching the wheel speed reduction.   1. The whole HUILI Mountain Deer tractor has a compact structure, flexible steering, and a small turning circle radius, making it more suitable for operations on small and medium-sized plots.   2. Two-way driving function, dual clutch and dual PTO design, easy and fast operation, meeting different operating needs, and efficient operation.   3. The gearbox has a full gear set for shifting, making the operation smooth and reliable; the dual-clutch design makes the operation more efficient and reliable. https://www.hlbmachinery.com/prod , ucts.html

1. The transmission system is a crawler tractor with differential steering and shuttle gearbox independently developed by our company. It can be designed to be driven in both directions according to the user's purpose.   2. This HUILI Mountain Turtle uses Yuchai high-pressure common rail engine, supercharged and intercooled, energy-saving, environmentally friendly, and powerful.   3. The traveling system adopts a triangular crawler type with high ground clearance. The center-mounted track roller has a self-adjusting balancing device. The crawler runs smoothly, is not easy to derail, and is easy to adjust.   4. Steering wheel, planetary plus differential design, easy steering.

1. 50HP hilly mountain wheel tractor t is independently developed and designed according to the concept of system engineering. It is a multi-purpose hilly mountain tractor composed of a main power module, a functional module and an attachment module. The combination of each module can be quickly connected through the electromechanical and hydraulic standardized interface, making the operation simple and convenient., flexible.   2. The innovative structural design can realize functions such as variable wheelbase, adjustable ground clearance, wheel-track switching, and two-way driving, and can be equipped with a variety of working platforms;   3. The application of key technologies such as front and rear axle wheel speed reduction, articulated steering, four-wheel and other large drives, front and rear differential locks, and air-controlled mechanical seal braking devices make the whole machine have a small turning radius, good passability, and strong stability. , superior climbing ability, better adapted to large-scale operations under various complex working conditions.

It is suitable for absorbing and discharging sewage, feces, biogas residue liquid, etc. in rural areas. At the same time, it is responsible for transportation and spraying operations, and is suitable for the majority of biogas tank users, sanitation sewage treatment and other environmental operations.   hilly and mountainous wheeled tractor Features: In the modular concept, this car is the result of a combination of long-wheelbase platform modules and power modules. When necessary, the long-wheelbase platform module can be switched to a three-point suspension module to form a standard tractor, which is the Shanniu series.

50HP hilly mountain palm garden wheeled tractor Characteristic: 1. Four-wheel drive, good off-road performance. 2. The overall design of the drive front axle and gearbox is compact in structure. 3. Full four-wheel synchronization, with less tire wear and less power loss. 4. When used together with front and rear differential locks, it has a strong ability to get out of trouble.   HUILI Mountain Dragon Economical: 1. Palm fruits have large loading capacity, fast transportation speed and high efficiency. 2. The whole machine has a long service life.   Fully hydraulic articulated steering system 1. Small rotation and flexibility. 2. Rotate the waist structure and land on four wheels in real time.   Rim structure: 1. Wide-body tires or twin tires have small ground pressure and large load- bearing capacity. 2. The wheels are decelerated, the ground clearance is high, and the passing ability is strong.   This product adopts a fully enclosed braking system: 1. Fully enclosed structure, good sealing, pay attention to mud, water, sand and gravel. 2. The tractor can only start when there is sufficient air. When the air brake is insufficient, the tractor will automatically lock to improve safety. https://www.hlbmachinery.com/

TL-5 burning furnace is consists of 5 parts: a blower, flue gas induced draft fan, burner, five-layer sleeve body and control system. The flue gas in the furnace takes two rounds while the fresh air takes three rounds. Natural gas is burned through the burner to generate a high-temperature flame. Under the action of the flue gas fan, the heat is transferred to the heated air through the five-layer sleeve wall and dense fins, meanwhile the flue gas is discharging out the body after it´s temperature down to 150℃. The heated fresh air enter the sleeves through blower. After heat mix, the temperature rises to the setting number and sent out from the hot air outlet. 4、Advantages/features 1. Continuously provide pure air with constant temperature and constant pressure. 2. Temperature has a wide adjustable range: 40~300℃ 3. Indirect heating, automatic operation, exhaust gas emissions meet the requirements 4. Reasonable design, compact structure, thermal efficiency up to 75% 5. Stainless steel high temperature resistant inner tank, durable

Minimum Order: 1 bags

The TL-4 burning furnace consists of 3 layers of cylinders. It uses fully burned natural gas to obtain high-temperature flame, and mixing this temperature with fresh air to achieve the required hot air device. Due to the use of fully automatic single-stage fire, two-stage fire or modulating burner, the output hot air is extremely clean by natural gas fully burned, , meeting the drying and dehydration needs for most stuffs. The external fresh air enter the furnace body under negative pressure, takes two strokes and sequentially cools the middle cylinder and the inner tank. After being fully mixed with the high-temperature flame in the mixing zone, it is extracted from the furnace body and enter the drying room. When the temperature reach the setting number, the main burner stops working and the auxiliary burner continues to burn to maintain the temperature. When the temperature drops to the set lower limit temperature, the main burner will be run again. 4、Advantages/features 1. Simple structure and easy installation 2. Small air volume, high temperature, adjustable from normal temperature to 500℃ 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. The fresh air has a long stroke that can fully cool the inner tank, so the outer tank can be touched without insulation. 6. Equipped with high temperature resistant centrifugal fan, large pressure center and long lift

Minimum Order: 1 bags

TL-3 burning furnace is consists of 8 parts: natural gas burner + inner tank + insulation box + fan + fresh air damper + waste heat recovery device + dehumidification fan + control system. It is specially designed for supporting downflow drying room/heating rooms. After fully combusts the natural gas inside the inner tank, it´s mixed with recycle or fresh air, under the action of the fan, it is discharged from the upper outlet into the drying room or heating space. Then cooled air pass through the lower air outlet for secondary heating and continuous circulation. And when the humidity of circulating air reaches the emission standard, the dehumidification fan and fresh air damper will start simultaneously. The exhausted moisture and fresh air implement sufficient heat exchange in the waste heat recovery device, so the moisture is discharged and the fresh air with recovered heat enter the circulation system. 4. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. Integrating the dehumidification and fresh air system, heat loss is extremely small through by the waste heat recovery device. 8. Automatically replenish fresh air

Minimum Order: 1 bags

TL-2 model Direct burning furnace is consists of 6 parts: natural gas burner + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by full combustion of natural gas. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. 4. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air

Minimum Order: 1 bags

ZL-3 steam air heater is consists of 9 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan + Fresh air damper + waste heat recovery device + dehumidification fan + electric control system. It is specially designed for supporting downflow drying room/heating rooms. After convert the outside steam heat to heat inside the insulation box through by the fin tube, it´s mixing with recycle or fresh air, under the action of the fan, it is discharged from the upper outlet into the drying room or heating space. Then cooled air pass through the lower air outlet for secondary heating and continuous circulation. And when the humidity of circulating air reaches the emission standard, the dehumidification fan and fresh air damper will start simultaneously. The exhausted moisture and fresh air implement sufficient heat exchange in the waste heat recovery device, so the moisture is discharged and the fresh air with recovered heat enter the circulation system.Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel electric heating finned tube, durable 4. Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 5. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 6．High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. Integrating the dehumidification and fresh air system, heat loss is extremely small through by the waste heat recovery device. 8. Automatically replenish fresh air

Minimum Order: 1 bags

ZL-2 steam air heater is consists of 7 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan+ Fresh air damper + electric control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by steam heater. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. 1.Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3．Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 4. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air

Minimum Order: 1 bags

ZL-1 steam air heater is consists of 6 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan + electric control system. Steam passes the though the fin tube, dissipating heat to the insulation box, mixing and heating the fresh or recycle air to setting temperature, fans bring this hot air into drying room or heating room to be used for dehydration, dehumidification or heating. 4. Advantages/features 1. Simple structure, beautiful appearance, low cost 2. Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 3. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 4. Large air volume and small wind temperature fluctuation 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.

Minimum Order: 1 bags