Active Components

STMicroelectronics ST62T60CB6 Integrated Circuits(ICs) Advantages of Utmel Wide Selection of electronic components at Utmel! 5 Million Alternative Parts to Keep Regular Production Offer More Rare Components to Save Time Support You From Prototype to Production. Your Effective Assistant of the Components Sourcing 100% Original & New parts , Available to Track Authorized franchise, Reliable Channel The data is continuously updated and supplemented 10 Million Datasheets to Download for Free Leading in Product Availability, Speed of Service, and More. Welcome to Request Quote at https://www.utmel.com/rfq

Minimum Order: 1 bags

Product Description 32 Grade High Accuracy +/-0.1C NTC Thermistor With Enameled Wire For Thermometer Description Of The 32 Grade High Accuracy +/-0.1C NTC Thermistor High Precision NTC Thermistors for Extremely Accurate Temperature Measurement The MF51E NTC Thermistors were specially designed for use in electronic thermometers which require better than average accuracy. The extremely small size allows the thermistor to respond very quickly to tiny changes in temperature. The MF51E can be supplied un-calibrated with standard tolerances or calibrated and grouped according to R at 37°C±0.01% for extreme interchangeability so as to eliminate the need for other calibrations. Features Of The 32 Grade High Accuracy +/-0.1C NTC Thermistor ■ Small Size and fast response and light weight ■ Long term Stability and Reliability ■ High accuracy and Interchangeability ■ High Sensitivity and Fast thermal response ■ Thermally Conductive Epoxy coated ■ Available tolerances: ±0.5%, ±1%, ±2%, ±3% and ±5% ■ B Value tolerances: ±0.5%, ±1.0% and ±2.0% ■ Resistance calibration available at 37°C ±0.01% (see table for details of grouping) ■ Long-term Stability and Reliability ■ Excellent Tolerance and Interchangeability ■ Available in all popular resistance values ■ Dissipation Constant ≥0.7mW/°C ■ Time Constant of ≤3.2 seconds ■ Rated Power: 3.5mW ■ Operating Temperature Range Applications Of The 32 Grade High Accuracy +/-0.1C NTC Thermistor 3950 1000K Ohm Power NTC Thermistor 1 Fire alarm, computer, copier, electronic calendar, thermometer, temperature control instrument and temperature compensation. ■ Temperature sensing , control and compensation ■ Electronic thermometer, Medical equipment and patient monitoring ■ General Instrumentation applications ■ Electronic Thermometers ■ Medical Equipment and Patient

Technology for Better Performance Newly Designed Shape Intelligent Operation Special Core Program Open Cooling Fin Aerial drone Brushless ESC 40A/ 50A Aerial Drone Brushless ESC 40A Aerial Drone Brushless ESC 50A Current 40A Current 40A Input 3-6S Input 3-6S Applications Wheelbase>550mm, aerial drone Applications Wheelbase> 650mm, aerial drone Newly Designed Shape A brand new structural design that is enclosed within an exquisite solid plastic case that provides the all-round security and protection for the high speed esc. The newly designed ESC can be easily placed into a carbon-fiber tube with the I. D. of 23mm. Auto Timing Adjustment & Preset Parameters for Highly Intelligent Operation Auto timing adjustment and preset parameters applicable to most applications extremely simplify operation and optimize user experience. Special Core Program for Rapid Throttle Response The multi-rotor has made the demand over ESC response become even harsher than usual. Our newly special core program for rapid throttle response rate means a more stable hover and swift movement during flight. With the ESC’s new rapid response rate, the ESC can handle difficult and new challenges at ease. Driving Efficiency Optimization(DEO) Technology for Better Performance Driving Efficiency Optimization (DEO) Technology is adopted for a higher driving efficiency. Open Cooling Fin A high-performance aluminum folded fin heat sink is combined with the specially designed heat-conductive slotted structure that brings excellent heat- dissipating effect. This is an Extremely Simplified Operational Procedure. Aerial Drone Brushless ESC 40A Aerial Drone Brushless ESC 50A Specifications Cont./ Peak/ Current 40A/ 60A 50A/ 70A Input 3-6S LiPo 4-6S LiPo BEC Output No No Wires & Connectors Input Wires Red-16AWG-500mm*1  Black-16AWG-500mm*1 Red-14AWG-400mm*1  Black-14AWG-400mm*1 Output Wires Black-16AWG-75mm*3/No Black-14AWG-75mm*3 Input Connectors No No Output Connectors 3.5mm Gold Connectors (Female) 3.5mm Gold Connectors (Female) Features Throttle Calibration Supported Supported ESC Programming Supported DIP Switch DEO Supported Supported Oneshot Mode Not Supported Not Supported Timing Supported Supported Light Color Not Supported Supported Motor Rotation Not Supported Supported Size & Weight Size 66x21.8x11mm/ 73.5x21.8x11mm 48x30x15.5mm Weight 45g/ 50g 56g Applications 550mm Class Drone 650mm Class Drone Established in 2002, Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. We provide cheap fpv drone and etc. Want to know esc price or more? Please contact us.

Minimum Order: 1 bags

The mini hang iron is small in size and very convenient to carry. This good handheld steamer for clothes does not take up any space in the suitcase on a business trip. It can also be carried by hand. This portable handheld portable cloth steamer heats up quickly and is easy to operate. Features of Handheld New Design Light Weight Steamer For Clothes Strong steam: continuously remove wrinkles and fast softening shapes Artistic design: integrated molding light handle feeling Water tank hidden design: scientific seal design with no leakage Straight-line acceleration and smooth steam output: strong steam flow, penetrate clothing easily Suitable for various fabrics: silk, fiber, nylon, polyester fiber, flannelette, wool, cotton, hemp material Temperature control: built-in temperature control protection chip automatically power off while overheating Baofumei Technology is a garment steamer supplier, we provide good steamer for clothes, commercial grade garment steamer, mattress vacuum cleaner and etc. Want to know more? Please contact us.

The vehicle vacuum cleaner is a kind of vacuum cleaner with a compact design and easy to store in the car, mostly wireless. This vacuum cleaner is very suitable for cleaning car interior seats, carpets, etc. This professional car vacuum cleaner is for sale at a very cheap price. Advantages Of Car Vacuum Cleaner  Clean and Vacuum Function clean up the paper scraps and waste left in the car to make the car cleaner. Small Size The car vacuum cleaner is small and light, which is convenient for storage. How To Clean Cars With Vacuum Cleaner When using a car vacuum cleaner, blow off the dirt before vacuuming. For those dust that cannot be sucked away with a car vacuum cleaner, you can use a duster to pat it out of the car, and then use the car vacuum cleaner, which has a better effect. Pay attention, do not use too much force when dusting, otherwise, the dusted object will be easily damaged. In addition, when dusting, because there is a large amount of dust flying in the car, the door must be completely opened, and the air conditioner must be turned on to blow the dust out of the car. Baofumei Technology is a vacuum cleaner company, we provide vacuum cleaner for seats, car vacuum cleaner for car, stick vacuums and etc. Want to know vacuum cleaner mini price or car vacuum machine price? Please contact us.

Steel fiber for shotcrete -SFRS Steel fiber reinforced shotcrete (SFRS-steel fiber reinforced shotcrete) is referred to as "steel shotcrete", which is similar to plain shotcrete (short for plain shotcrete without steel fiber) and has the following characteristics: 1. high strength (tensile, bending and shear), High resistance to impact, explosion and vibration. 2. Good toughness (deformability), Good frost resistance, heat resistance and fatigue resistance; Strong crack resistance. 3. Even if the component has produced tiny cracks, the toughness will be greatly improved because the steel fiber continues to pull out. 4. The fiber direction after spraying is close to two-dimensional distribution, and the construction speed is fast and the adaptability is wide. 5. The rebound rate of steel shotcrete aggregate is lower than that of plain shotcrete, and the comprehensive unit price of steel shotcrete is lower, so steel shotcrete can replace the traditional shotcrete net support in NATM. Star Smith is a professional steel fiber manufacturer that can offer a wide range of steel fibre types that meets different needs.

Minimum Order: 100

MORNSUN rs485 communication module is designed by rs 485 protocol, and it replaces the traditional design by integrating transceiver, isolation chip and high efficient DC/DC isolation amplifier in one module. The modules can be used for inter-communications between devices on the industrial bus, achieving the signal transceiving and power isolation. The targeted market includes automotive industry, rail transportation, smart monitoring, smart meters, etc. MORNSUN power supply hope those RS 485 transceiver modules are an ideal fit for your application needs.

Minimum Order: 1 bags

MORNSUN 0.2-3W fixed input DC DC converter features compact size and high power density. It can be used in application where the voltage of the input MORNSUN power supply is stable. The ultra-compact volume is an ideal solution for communications, instrumentation and industrial electronics applications. And the operating temperature range is -40°C to 85°C, even up to 105°C, which is suitable for automotive industry. We hope that those high-efficiency, excellent-quality, and cost-effective DC DC converter is an ideal fit for your application needs. Fixed Input-FAQs How to meet the requirement for ripple & noise when using low cost dc dc converter? Low cost dc dc converters have a higher requirement for ripple & noise which need further filtering. There are the following measures: (1) add a capacitor at the output terminal (the function of the capacitor is to further lower ripple & noise with a relatively low frequency); 2) add a PI filter at the output terminal by filtering methods of capacitor + DM inductor + capacitor  OR capacitor + CM inductor + capacitor (this method lowers ripple & noise at the same time. If the frequency of the noise is high, it is recommended to use the pattern of capacitor + CM inductor + capacitor); (3) customers can choose a power module whose output voltage is one grade higher and add an LDO to reduce ripple & noise (for instance, customers practically need a 3.3V output power module but there are demanding requirements for ripple & noise. Please recommend customer to choose a 5V output power module and add an LDO to lower it to 3.3V, and the LDO can lower ripple & noise). What are the minimum starting current and input current of a module? The starting current of a module is generally about 1.4-1.6 times that of the Iin (max). The increase of capacitive load of the output terminal will also increase the starting current value of the module. It is recommended to select the forestage power supply with higher power. For the minimum input current in the unloading condition, please check the ‘No-load current’ section in the data sheet of the corresponding module. The module fails to start up when the capacitive load is relatively large. How to solve it? In practical application, the capacitive load exceeds the maximum capacitive load of operating module. In addition, when the output capacitance is extremely large, large starting current is required at the moment of start-up, resulting in the failure of starting the module. It is recommended to decrease the connected capacitance of the output terminal or add a buffer circuit at the output terminal to improve the capacity of the module to withstand capacitive load What problems will be caused and how to avoid them if a module starts up with an input voltage lower than the minimum rated one? The module may be damaged when it starts up at a voltage that is lower than that of input voltage range. Because there is no under-voltage protective circuits for the wide input voltage converters.  The starting voltage should be determined on the basis of the threshold voltage of MOSFET and soft starting circuit, and the starting voltage of the MOSFET is 2V or more lower than that of the minimum input voltage of the module. In this circumstance, lower voltage input requires higher input current so as to supply equal power; the power module is susceptible to damage in a higher input current condition. (1) It should be ensured that the actual input voltage is in the rated range specified in the data sheet;  (2) it is recommended to add an input under-voltage protective circuit on the front-terminal of the module in accordance with the Wide Input Voltage DC/DC Converter Application Guide. Why is there high noise when the fixed input voltage product is used as the power source of the relay? There is high reflected ripple during the operation of the relay.  It is recommended to implement some filtering measures or add a Y capacitor between the input and output grounds. As a dc dc converter manufacturers, we will make no spare efforts to help consumers.

Minimum Order: 1 bags

Product Description Water Heater Temperature Sensor NTC Temperature Probe With Plastic Metal Description: 1. Wide operating temperature range, good stability and reliability. 2. Easy to installation and manipulation as the sealing can be done according to environment and conditions there it is applied by customer. 3. Accurate testing can reflect temperature change precisely. Basic Product Information Connector Series Temperature Sensor Probe Thermistor Resistance 10K 3950 Sensor type NTC Application Range Room/Outside/Duct/Immersion ETC Operating temp range -30℃ ~+105 ℃ NTC Thermistor Applications 1. Vacuum Meter, Thermometer, Cosmetic Instrument, Power Supply, Electronic Toys 2. Gas analyzer cell phone batteries, NB batteries, electric vehicle batteries, medical instruments 3. Solar water heaters, refrigerators, automobiles, photocopiers, fax machines 4. Electronic thermometer, electronic stove, electronic pot, electric water bottle 5. Dryers, irons, gas water heaters, blankets, air conditioners 6.3C Household Appliances, Petroleum Heating Furnace, Microwave Furnace Our Advantages: . Over 10 years temperature sensor experience . Factory direct sales with our own advance machine. . 24-hour hotline,service more swiftly . Resonabel price,best quality,prompt delivery. . Professional design team to serve you. . OEM service is availabl. . SGS certificate assure you our good quality. About Customization: Other parameters and wire length can be customized according to customer needs. Commonly used resistance values 5K, 10K, 15K, 20K, 50K, 100K Commonly used resistance B values are 3950 and 3435 and 3470, 3380, etc. Accuracy is 1%, 3%, 5% If you need customization, please contact us and tell us your requirements!

YuRacking Metal products is one of the leading warehouse racking suppliers and warehouse storage racks manufacturers in china racking industry, main products include: pallet racking, warehouse shelving, pallet shuttle system, mezzanine and other relate metal products. Storage wire cage, also called wire container storage cages or wire mesh pallet cage. The main parts of industrial wire containers include wire steel and base support U shape steel, which is used to strengthen the structure. The mesh cages for storage not only make the goods orderly and easy for inventory, but also improve the effective utilization of warehouse space. Storage container wire cage is widely used for transportation and storage, bulk materials handling, the temporary storage of raw materials, half finished products, finished products, automotive parts, accessories and spare parts, hardware, machinery, electronics etc. YuRacking provides custom wire container storage cages: wire shelf bins, collapsible wire pallet baskets, steel mesh security cages, wire container with casters, etc. trying to meet the needs of every customer.   The Features of Storage Wire Cage Welded wire mesh design, stable in structure; Can be foldable, can be stackable in 3-4 levels; Galvanized finish for anti-rust, anti-corrosion; Product can be customized specification; Standard size, or customized sizes available; Half drop front gate, allows easy access into cage even when stacked; Can be collapsible packing loading into container;

Minimum Order: 40

YuRacking Metal products is one of the leading warehouse racking suppliers and warehouse storage racks manufacturers in china racking industry, main products include: pallet racking, warehouse shelving, pallet shuttle system, mezzanine and other relate metal products. Selective Pallet Racking, 100% selective, main parts: upright frames, beam, other components and accessories, provides a direct access to all pallets, one of the most economical selective mobile racking solution. Can be customized to cargos of any size and weight, available to any application and conditions. Easy to install and maintain. Selective pallet racking system is designed for pallet storage, a very common warehouse pallet racks, usually arranged in single rows aside the wall, double racks (back-to-back) in the middle parts, suitable to any kinds of pallets: steel/wood/plastic; Europe/America/Asia standard. This single deep racking provides a high level of flexibility to your storage plan as your needs grow in the future. The Features of Selective Pallet Racking Pallet Most widely used, 100% selective, access to pallets from both sides; Friendly to any kinds of goods, ideal to store many different types of cargos; Flexible in size, height can be up to 18m, even higher, depends on the warehouse size; Easy assembly, easy installation; The Specification of Selective Pallet Racking Material Steel Q235 Size Length: 1500-3600mmWidth: 900/1000/1100/1200mm Height: 2000-22,000mm Thickness 1.5mm-3.0mm Load Capacity 1000-4000kg/layer; 6000-22000kg/bay Surface Powder Coated or Galvanized Feature Anti-rust, Corrosion-protection Aisle Size Standard aisle: 3300mm-3500mm Forklift Type Standard forklift for the wide aisle racking Sample/OEM/ODM Available Packing Post: pallet size: L=upright height*W1.1m*H1.1m-1.2m (GP/HQ container, total weight is below 2.5T/pallet) Bracer: pallet size: L=bracer length*W1.1m*H1.1m Beam: pallet size: L=beam length*W1.1m*H1.1m-1.25m (GP/HQ container) Delivery Time 15 days after deposit All size can be customized as your demands Selective Pallet Racking Beam Load Capacity

Minimum Order: 40

Price : USD 1,300.00/Pcs Min Order : 1 - 5 Pcs Lead Time : 3 – 5 Days Port : CIF / Kualanamu International Airport Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock Buy Mimaki TS500-1800 Gen5 Printhead from Indoelectronic is 100% safe,Because purchase products at Indoelectronic provide a 100% money back guarantee. Location Indoelectronic : Jl.S.Parman No.21/272 Medan. To purchase online visit the website :indoelectronic.com Indoelectronic store Sell Brand model Printhead and Printers : Canon, Epson, Graptek, HP, Konica, Mimaki, Mutoh, Ricoh, Roland, Seiko, Spectra, Toshiba, Vutex, and Xaar. Contact us : order@indoelectronic.com Phone :+6281283202521 . Get the special price. Description Mimaki TS500-1800 Gen5 printhead Assy Type-D - M014140 This printhead is suitable for Mimaki TS500-1800 & TX500-1800 series printers. Printer Compatibility: Mimaki TS500-1800 / TX500-1800B / TX500-1800DS Part No.: M014140 Remarks: Original Specifications: Model PRH-MIM-006 Head materials SST, Nickel alloy, Epoxy Adhesive Number of nozzles Four 320 nozzles Nozzle spacing 0.1693 mm Nozzle density up to 600 npi Nozzle plate surface Coated SST Piezo type D33 Stacked PZT Native drop volume 7 pl Drop volume range 7 - 35 pl Drop velocity 7 m/s Jetting frequency Up to 60 kHZ Temperature control Integrated Heater and Thermistor Operator temperature range Up to 80° C Life 100 billion actuations per nozzle Dimensions 89 x 25 x 69 mm (not include cables)

Minimum Order: 1 bags

Price : USD 617.00/Pcs Min Order : 1 - 5 Pcs Lead Time : 3 – 5 Days Port : CIF / Kualanamu International Airport Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock Buy Mimaki JV5 / JV33 Printhead Original- M007947 from Indoelectronic is 100% safe,Because purchase products at Indoelectronic provide a 100% money back guarantee. Location Indoelectronic : Jl.S.Parman No.21/272 Medan. To purchase online visit the website :indoelectronic.com Indoelectronic store Sell Brand model Printhead and Printers : Canon, Epson, Graptek, HP, Konica, Mimaki, Mutoh, Ricoh, Roland, Seiko, Spectra, Toshiba, Vutex, and Xaar. Contact us : order@indoelectronic.com Phone :+6281283202521 . Get the special price. Description Mimaki JV5 / jv33 Printhead- M007947 To be used with: Aleph TXB 160S, Mimaki JV5 (JV5-130 / JV5-130S / JV5-160 / JV5-160S / JV5-250 / JV5-260S / JV5-320 / JV5-320DS / JV5-320S ), mimaki jv33 (Mimaki JV33-130 / JV33-160 / JV33-260), Mimaki CJV30(CJV30-100 / CJV30-130 / CJV30-160 / CJV30-60 / CJV30-100BS / CJV30-130BS / CJV30-160BS / CJV30-60BS), Mimaki TS5-1600 / TPC-1000 / TS3-1600 Remarks: Original Description: This original JV5 print head is used for Mimaki JV33 / JV5 printers. It is a new generation print head that allows fast speed, high resolution printing with ecosolvent or mild solvent inks. This Mimaki JV5 original print head is delivered in a sealed Mimaki package (part number M007947). This is Mimaki original print head with the head ID but without the head memory board. Specifications: Technology Micro-Piezo Native resolution 1440 dpi Min. Droplet Size 1,5 pico litre Max. Droplet Size 21 pico litre Tot. Amount of Nozzles 1440 (8 lines x 180 nozzles) Firing Frequency 8 kHz Ink Compatibility eco-solvent and mild solvent

Minimum Order: 1 bags

Price : USD 800.00/Pcs Min Order : 1 - 5 Pcs Lead Time : 3 – 5 Days Port : CIF / Kualanamu International Airport Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock Buy Mimaki TX300 / TS300 Printhead - M015885 from Indoelectronic is 100% safe,Because purchase products at Indoelectronic provide a 100% money back guarantee. Location Indoelectronic : Jl.S.Parman No.21/272 Medan. To purchase online visit the website :indoelectronic.com Indoelectronic store Sell Brand model Printhead and Printers : Canon, Epson, Graptek, HP, Konica, Mimaki, Mutoh, Ricoh, Roland, Seiko, Spectra, Toshiba, Vutex, and Xaar. Contact us : order@indoelectronic.com Phone :+6281283202521 . Get the special price. Description Mimaki TX300 / TS300 Printhead - M015885 Compatible Printer: Mimaki TX300 / TS300 Manufacturer: Mimaki