Abrasives

Synthetic diamond micron powder is a new type of super-hard and ultra-fine abrasive formed by artificial diamond single crystal through special processing. It is an ideal raw material for grinding and polishing high-hardness materials such as cemented carbide, ceramics, gems, and optical glass. Available Size: 0-0.25 to 40-60.

Minimum Order: 1 bags

"A leading manufacturer of synthetic diamond industry since 1990, dedicating in diamond materials for cutting, grinding, lapping, polishing applications.Advanced Equipment Advanced production & testing equipment, strong technical capability ensures all the products are produced strictly with the accordance of national standards, customized diamond products are available upon customers’ different requirements.Products Main Products: Mesh & Micron size Diamond Powders, crushed/milled/reshaped diamond powders,diamond coatings powder,diamond lapping paste,diamond sanding belt.diamond slurry,diamond flap disc,diamond hand pads,etc."

Minimum Order: 10 long tons

Small Flap Wheel with shaft are made from strips of high quality aluminum oxide material or none-woven materials closed packed and radially bonded to a shaft or metal center. These wheels are more durable and provide a longer and cooler cutting action. Recommended for cleaning, deburring, blending, and polish grinding on stainless steel, aluminum, etc. Mounted Flap Wheels are a general-purpose tool effectively used in a wide variety of applications ranging from weld removal and deburring to final finishing. They are specifically designed to provide the versatility required in a modern metal-working factory. Providing an optimal finish on both stainless steel and non-ferrous metals. Specification Model No. SFW45 Diameter 8-80mm (customized) Grain AlO Max speed 3800 rpm Girt P36-P240 Application Wood, metal, stainless steel, Alloy Shaft size 3mm, 6mm Bond R/R     Bond R/R

Flap disc is a type of fast rate grinding products. The main applications are of Polishing Flap Disc are grinding weld, deburring, rust removal, edge grinding, and weld seam blending with angle grinders. It also can be grinding for wood, metal, stainless steel, lacquer and so on.  Specification NAME ABRASIVES BACKIiNG cOVER TYPE GRIT Size(mm) FLAP DISC Aluminum Oxide, Silicon Carbide, Zirconia, Ceremic Fiber glass/ Plastic T27/T29 P36-P120 100*16 115*22 125*22 150*22 180*22  

The poly-cotton Jwt cloth AJ25 with calcined aluminum oxide, is flexible, high wear-resistant and high strew grains density. The backing cloth make anti-slip treatment with high strength, is very suitable for belt making. You can get an excellent work surface after sanding. AJ25 Custom Sanding Belts can be converted into narrow and semi-wide belt. Application RMC Jwt cloth AJ25 is mainly used in stainless steel, surgical instrument, carbon steel, hardwood, furniture, and irregular surfaces and so on.

RMC AP33M is a special product suitable for fast sanding. Premium aluminum oxide mineral is durable, fast-cutting and performs well on many surfaces. Strong, C-weight paper backing supports aggressive sanding with extra durability compared to lighter weight paper backings. Semi-open coat construction and load-resistant coating prevent premature loading of Custom Velcro Disc surface to maximize cut and extend abrasive life. Durable AP33M is well suited for high production sanding operations as well as general-purpose applications on paint, primer, wood, metal, plastic, and composites, including fiberglass.

MPO/MTP Polishing Slurry (Cerium Oxide) Grish MPO/MTP Polishing Slurry(Cerium Oxide) is a kind of environmental friendly water-based polishing slurry. Made of high quality abrasive materials, the slurry has good dispersity, uniform grain size and high polishing efficiency. Meanwhile, the features that easy-to-clean and non- residue makes it very suitable for MPO/MTP polishing process. Specifications: Series Type Particle Size CO Slurry CO-1-30B 0.5-1.0 CO Slurry CO-1-30C 0.5-1.0 Remark: Customizations are available upon requests. Features: 1. No scratch on the surface after polishing process; 2. No broken edge on the surface after polishing process; 3. Easy-to-clean and non-residue. Instructions 1. Shaking the bottle to make the abrasive redisperse before using. 2. Pls use slurry with PU series polishing pad.

GRISH Silicon Carbide Lapping Film is coated with precisely graded silicon carbide powder on the high strength polyester backing to provide a uniform, consistent finish. Available in 1-30 μm grades, with or without PSA (Pressure Sensitive Adhesive) backing. Specifications Mesh：600, 1000, 1200, 2000, 3000, 4000, 8000 Particle size/µm: 30, 16, 15, 9, 5, 3, 1 Remark: Customizations are available upon requests. Application: 1.For Optical fiber connector cutting Angle, coarse, medium and fine grinding; 2.Optical lens, optical crystal, LED, LCD grinding and polishing 3.Polishing of magnetic head and hard disk

Grish Final polishing Film is specially researched and developed for the final polishing of optical fiber connector. It is composed of nanometer silica particles mixed with high efficiency adhesive, evenly coated on the surface of polyester film, after drying and curing reaction. Because the polished original particles are fine and the particle size is smaller than the wavelength of visible light, they are evenly distributed to form a transparent or translucent abrasive paper. The Final polishing Film only needs to add purified water as the polishing medium. During the polishing process, the nano-coating of the polishing piece will gradually release the polishing particles and participate in the polishing effect, so that the end face of the fiber reaches a high degree of smoothness. The Final polishing Film can be reused many times, but depending on the type of polisher, conditions, and quality requirements, the number of times they are used varies. SO-01L, SO-01M and SO-01H series are GRISH new generation polishes. The improved products have higher polishing efficiency and grinding yield. The different polishing forces of the three products can meet different process conditions and grinding requirements. Specification of Final polishing Film: Appearance:Total transparent or semitransparent Mineral:SiO2 Particle size: 8～150nm (Laser granularity instrumentnpa-150) Size: Round: Φ70mm, Φ110mm, Φ127mm (5in), Φ203mm (8in); Rectangle: 114mm*114mm, 152mm*152mm (6inch), 203mm*206mm(8inch); Belt: 203mm (6inch) Remark: Customizations are available upon requests. Features of Final Polishing Film 1. High efficiency with good polishing ability; 2. Long Lifetime can greatly save costs; 3. Provide the stable fiber height. Using Method 1. Make sure there are no abnormal deep scratches or defects on the end face of the optical fiber after precision grinding of D1; 2. Thoroughly clean the grinding machine fixture and rubber pad and other parts, especially ensure the rubber pad surface intact, no foreign matter; 3. Spray an appropriate amount of purified water on the surface of the rubber pad, wipe it evenly with dust-free paper, and immediately stick the polish on the surface after the surface is dry; 4. Spray a small amount of pure water evenly onto the surface of the polish and wipe it evenly with dust-free paper to drive out the air below the polish 5. Purge the surface of the polish with compressed air to remove dust or foreign matter; 6. Then spray the surface of the polishes evenly with an appropriate amount of pure water 7. Gently release the connector fixture so that the connector end face is in even contact with the polishing plate, apply appropriate pressure, set the polishing time, and start the grinding machine to start polishing 8. After the grinding machine stops working, carefully remove the fixture, take out the polishing plate, and dry it for reuse

Micro finishing Film GRISH Microfinishing film is produced by coating the abrasive grains uniformly on the high strength PET film, which can provide high efficiency and achieve mirror finishing result. Available abrasive materials are aluminum oxide, silicon carbide and diamond etc. to meet different hardness of workpiece finishing requirments. Specifications Abrasive , /Grit Size Silicon Carbide(SC) Aluminum Oxide(AO) Diamond(D） 100µm #150: Aluminum Oxide(AO) 80µm #180: Silicon Carbide(SC), Aluminum Oxide(AO), Diamond(D）; 60µm #240: Silicon Carbide(SC), Aluminum Oxide(AO), Diamond(D）; 50µm #320: Aluminum Oxide(AO); 40µm #360: Silicon Carbide(SC), Aluminum Oxide(AO), Diamond(D） 30µm #600: Silicon Carbide(SC), Aluminum Oxide(AO), Diamond(D） 20µm #800: Aluminum Oxide(AO), Diamond(D） 15µm #1200: Silicon Carbide(SC), Aluminum Oxide(AO), Diamond(D） 12µm #1500: Aluminum Oxide(AO) 9µm #2000: Silicon Carbide(SC), Aluminum Oxide(AO) PET (base): Thickness: 100µm (4mil), 75µm(3mil), 125µm (5mil); Length: 200mm*15m, 101.6mm (4in)*46m, 100mm*15m, 112.6mm (1/2in)*46m; Backing: Anti-slip, PSA, Velcro Remark: Customizations are available upon requests. Features 1. High removal rate with well-plated abrasive grains; 2. Easy scraping and less plug; 3. Consistent finish performance with uniform PET backing and abrasive plated- upon; 4. Long durability and good cost-performance for customers. Applications: Crankshaft, Camshaft, Roller, etc.

Minimum Order: 1 bags

GRISH polishing flocked pile is produced by advanced electrostatic planting technology and precise coating technology. PGZ-1 is the flock planted directly on the polyester, and it can be used separately or used with the polishing liquid. PGZ-2 comes from PGZ-1 coated with the silicon oxide abrasive. Specification: Type PGZ , -1: No Abrasive, Application: Fiber Optic PGZ-2: Silicon Oxide Abrasive, Application: Fiber Optic Size: Φ70mm, Φ110mm (4.3inch), Φ127mm (5inch), Φ203mm(8inch); 114mm*114mm, 152mm*152mm(6inch), 228mm*280mm (9*11inch) Remark: Customizations are available upon requests. Features: 1. Outstanding polishing performance: Excellent polishing capability,outsdanding polishing effect and after polishing the roughness of the suerface can reach mirror level effect; 2. High degree of lapping uniformity: products' surface is neat and soft, can reach the high lapping consistency, can reach high degree of uniformity and smoothness after lapping/polishing; 3.Perfect curviture serface polishing effect: our products have good flexibility, can achieve a variety of curivture surface polishing, and the polishing effect is excellent; 4.Significant in reserving glass gullet/chip waste effect, Effectively avoid scratching: our products use electrostatic flocking substrates, with excellent elasticity and glass gullet/chip waste reserve and buffering effect, with water as polishing medium, can effectively avoid scratches to applying surfaces.

MPO（Multi-fiber Push On）Fiber Optic connector is a type of Plug and Play connector with multi-fiber cables as signal transmitting channels, Thus will require the polishing film being with the self-sharpening property, ensuring the Core Dip value will be positive one. Grish SC polishing film special for MPO utilize evolved coating recipe to produce our film with leading production technology to coat our films so much possibility as to meet customer’s manifold polishing condition. Specifications Model Particle size （μm） 12A 16 9 3 1 12B 16 9 3 1 Remark: Customizations are available upon requests. Features: 1. Slurry coating film with Uniform coating layer results in consistent polishing performance. 2. Featuring better self-sharpening during polishing 3. Uniform particle size help to get higher passing rate. 4. Can b e used for different polishing process 5. Two different recipe film models as option Applications: MPO/MTP Connector

MPO/MTP Polishing Pad GRISH MPO/MTP polishing pad, with an excellent interconnecting microporous structure, in the process of polishing can have excellent polishing stability and will be more durable on polishing life. It can be used together with Grish MPO polishing liquid, and is suitable for ultra-precision polishing of MPO/MTP. Specification Product Name: MPO/MTP Polishing Pad Material: Polyurethane (PU) Abrasive: N Color: Black Thickness(mm) 0.70-1.10 Shaw Hardness（A）: 70-90 Density(g/cm3): 0.500-0.700 Standard Pad Size: Disc：Φ127mm，with PSA Sheet：140mm*140mm，with PSA Remark: Customizations are available upon requests. Feature 1. Stable quality, good wear-resistance; 2. With good flexibility and elasticity, help to effectively avoid scratch; 3. The fluff gap on the surface can store a large amount of polishing fluid to improve the polishing efficiency; 4. Adhesive easy to strip off , no residual adhesive, easy to use. Instructions For Use 1. Take off the PSA paper of polishing pad, and attach the polishing pad to the glass pad evenly, ensure no air-gap; 2. Drip certain quantity of AO & CO slurry during polishing; 3. Please clean it with water after done polishing.

MPO/MTP Polishing Slurry (AO) Grish MPO/MTP Polishing Slurry (AO) is a kind of water-based, Eco-friendly polishing liquid, producing it with Superior Ultra fine polishing abrasives, featuring good dispersion, uniform Grit sizes, high polishing efficiency, mainly applied to fine polishing of MPO/MTP. Specifications: Name: MPO/MTP Polishing Slurry (AO) Model: Particle size（D50，um） AO-1-50B: 0.5-1.0 AO-1-50C: 0.5-1.0 Remark: Customizations are available upon requests. Features 1. Finer end-face finishing 2. Rare edge Fraction after polishing 3. Consistent Fiber Height for all ports 4. Easy cleaning for slurry and no residue. Applications: 1. Shake the slurry before using; 2. Used with MPO/MTP polishing Pad.