Offers to Sell

Applications * Strengthen pelvic floor muscles * Prevent and improve incontinence * Promote postpartum repair * Improve women private health * Improve vaginal sensitivity EMT1--C Working Principle Working Theory 图 HIEMT is based on high-intensity focused electromagnetic energy ,penertrates through the skin to target fat layers and the muscle layer, inducing powerful involuntary muscle contractions. It’s cutting-edge technology in non-invasive body contouring, as it not only BURNS FAT, but also BUILDS MUSCLE. It is non intrusive technology, There was no injury or discomfort, The non-invasive private beauty instrument adopts revolutionary HIEMT technology to stimulate motor neurons to control pelvic floor muscles, and makes pelvic floor muscles carry out over con-traction (12000 times of pelvic floor muscle contraction). Using electromagnetic pulse to stimulate motor neurons to control the pelvic floor muscle, make it contraction, activate the pelvic floor tissue, promote collagen regeneration, restore tightness, enhance elasticity, comprehensively repair the relaxed muscle, away from pelvic floor dysfunction diseases.

Minimum Order: 1 bags

Applications Skin rejuvenation Skin tightening and lifting Wrinkle removal Improve skin laxity Recover skin elasticity Working Principle HIFU is a non surgical and a non laser procedure that directs high intensity focused ultrasound also known as hifu knife into the deep skin layer in order to gently heat the tissue to lift and tighten aged skin without any incisions of disrupting skin surface .Hifu technology is able to transfer the heat energy into 3-4.5mm under the surface of the skin Specialty of HIFU-Q3 1. Adopts HIFU technology 2. The treatment by HIFU is non-invasive and painless, HIFU-Q3 can works at areas that 3mm and 4.5mm underneath of skin surface, focus at SMAS, stimulates collagens increase, recover SMAS’s function of stretch the muscles and skin, get a perfect result of freckle removal. 3. HIFU-Q1 has 2 extra transducer 8mm and 13mm,which give you an option for body treatment: body tightening, lifting. 4. High accuracy and controllability, with the unique ultrasound skin scan system, HIFU-Q3 can lock the target area for treating precisely, easy for targeted therapy, parameters are adjustable for safe, accurate treatment. 5. Non-invasive treatment, without any downtime .Because strong energy is delivered deeply into skin without affecting the epidermis the treatment is safe. 6. Minimization of treatment affects because facial cleasing and makeup is possible even immediately after treatment.

Minimum Order: 1 bags

Hifu High Intensity Focused Ultrasound Professional Face Lifting Machine Mini Hifu Cartridges Beauty Salon Equipment Anti-Aging Working Theory: High Intensity Focused Ultrasound (HIFU) directly delivers heat energy to skin and subcutaneous tissue that can stimulate and renew the skin's collagen and thus consequently improving the texture and reducing sagging of the skin. It literally achieves the results of a facelift or a body lifts without any invasive surgery or injections, moreover, an added bonus of this procedure is that there is no downtime. This technique can be applied to the face as well as the whole body, and also, it works equally well for people of all skin colours, in contrast to that of lasers and the intense pulse lights. HIFU machine is a non surgical and a non laser procedure that directs high intensity focused ultrasound, also known as HIFU knife into the deep skin layer in order to gently heat the tissue to lift and tighten aged skin without any incisions of disrupting skin surface. HIFU technology is able to transfer the heat energy into 3-4.5mm under the surface of the skin. It will heat the SMAS up to 60-70 temperature the raises thermal coagulation point which accelerates skin rejuvenation process and maximizes tightening effect of the skin layer. How it works? Advanced High Intensity Focused Ultrasound(HIFU) adopts technology which is not like lasers, radio frequency, surgery and other technologies, HIFU is non- surgical. HIFU steer around the surface of the skin to deliver the precise and fractional of ultrasound energy at the right depths(i.e.3.0mm/ 4.5mm SMAS layer) without damaging or disrupting the epidermal tissue of skin and the right temperature 65~70ºC.This energy stimulates the new collagen to reproduction, which rejuvenates the skin leading to a more youthful and bright or to sharpen contouring. HIFU is especially suitable for treating sagging skin with reasonable thickness as well. Machine Advantages: 1. Non-Invasive treatment both for face and body with different cartridge; 2. Adopts HIFU technology, the temperature of focused ultrasound can reach 65 ºC to 100 ºC; 3. Security control system can distinguish different cartridge automatically; 4. Special Cartridge connect method make sure no energy loss during the treatment; 5. Professional mode with free setting parameter and memory function for saving data; 6. Smart mode with limited energy and preseted parameters for simple and safe treatment; 7. Uniform energy distribution brings better clinical effect and quickly treatment; 8. Cartridge with long life span of 10,000 shots; 9. HIFU-Q3 has 2 extra transducer 8mm and 13mm,which give you an option for body treatment: body tightening ,lifting and slimming. Technical Specifications: Model HIFU-Q3 Machine Type Anti-wrinkle Machine Operation principle Ultrasonic Voltage Input AC220V-230V/50-60HZ AC100V-110V/50-60HZ Output Power 0.1~2.0J(0.1J/step) Space Range 1.0~4.0mm(0.5mm/step) Length 5.0~25mm(1.0mm/step) Screen Size 15" TFT LCD touch screen HIFU Cartridge 3 heads for standard:1.5mm, 3.0mm, 4.5mm; 2 heads for optional: 8mm,13mm. Cartridge Shots 10,000shots/catridge(20,000shots for option) Gross Weight 20.0KG Packing Size(size) 480*570*550 mm HIFU Cartridges: 1. DS-4.5mm: To transmit high- energy focused ultrasound to the skin, subcutaneous tissue, the ultrasound to penetrate the skin to a depth of 4.5mm, direct subcutaneous SMAS layer, forming "heat coagulation" regional, targeted to thicker skin, such as cheeks, etc. 2. DS-3.0mm: To transmitting high frequency into the dermis layer of the skin tissue,the ultrasound to penetrate the skin to a depth of 3.0mm,is responsible for activating the skin's dermal layer of collagen,effectively enhance the effect of the consolidation of the outline,but also improve large pores and reduce the appearance of wrinkles. 3. DS-1.5mm: To transmit high-energy focused ultrasound to the epidermis tissue,the ultrasound to penetrate the skin to a depth of 1.5mm,is responsible for activating the skin epidermis in thinner tissue. 4. DS-8.0/13.0mm: To transmit high intensity focused ultrasound activating in depth of 8.0mm/13.0mm. targeted to thicker skin, such as thighs, buttocks.

Minimum Order: 1 bags

Applications Wrinkle removal Tightening sagging skin on the neck Liting the cheeks, eyebrows, and eyelids Enhancing jawline definition Tightening of the decolletage Smoothing the skin Working Principle MPT-Ashley (8) MMFU (MACRO & MICRO OCUSEDULTRASOUND) is a non-surgical treatment of face lifting, firming and body contouring system. According to different skin types and treatment parts, the depth can be adjusted to treat the dermis and subcutaneous fat layer. Synergistic effect is produced by gathering ultrasonic waves and outputting energy at the same time. The energy penetrates the inner and outer layers of the skin synchronously without damaging the epidermis, which will cause a lot of pain and redness during the treatment. A new series, is safer and maximizes MMFU(Micro & Macro Focused Ultrasound) efficiency by dividing the TCP(Thermal coagulation point) generating method into micro-unit beyond the technology to create precise TCP quality.

Minimum Order: 1 bags

Applications 1. Wrinkle removal: fine lines, crow's feet, forehead lines, nasolabial folds, neck lines, etc. 2. Facial rejuvenation and beautification, skin regeneration, firming and lifting 3. Remodel fat and collagen, improve cellulite, improve stretch marks, and refine skin texture 4. Postpartum repair: (abdomen) stretch marks, (buttocks, legs) swelling marks 5. Skin rejuvenation: Improve uneven or rough skin texture, dull skin texture and make the skin rosy; shrink large pores 6. Scar removal: acne pits and acne marks, acne depression scars, burn scars 7. Treatment of acne: especially effective in the treatment of active acne; 8. Deodorization: treat underarm odor and armpit hyperhidrosis; 9. Regular skin maintenance. 1711435371773 Working Principle Morpheus8 RF is a minimally invasive fractional treatment combining microneedles and RF energy. Under the control of the electronic system, dozens of insulated needles quickly penetrate the epidermis at the same time, emit RF energy from the needle tip, and then quickly exit the skin. RF energy is penetrated deep into the skin through tiny needles, causing tiny damage, penetrating and opening the absorption channel of the skin, so that nutritional products can enter the skin, and trigger the body's natural healing response. At this time, the thermal stimulation generated by RF together stimulates the self-repair mechanism of the skin, while liquefying and destroying fat cells, it shrinks a large area of soft tissue and stimulates the production of skin fibrous tissue and collagen, thereby reducing fat, remodeling and Tighten and lift the skin. The penetration of Crystallite opens the fast absorption channel of the skin, and can directly introduce repair liquid, antioxidants and other drugs into the deep layer of the skin, which can further play the role of active ingredients and drugs, further deeply repair the skin, and realize the effect of 1+1>2 Purpose. While the system automatically releases energy, the "Explosive Mode" RF technology can instantly release energy at three different depths under the skin. Multi-level fixed-point superposition treatment, energy delivery is uniform and stable. Specialty of Morpheus8 1. Double handle design, wide range of treatment. 2. A variety of probe specifications: 12P, 24P, 40P, nano crystal head, more peace of mind without repetition. 3. Provide the deepest RF fractional therapy, which can penetrate subcutaneous tissue up to 8mm. 4. Realize humanized operation: the depth can be adjusted between 0.5 and 7mm, the depth of the needle can be adjusted freely, and it can be used on skin of any thickness. 5. Original burst mode: deep segmented subcutaneous heating technology, multi- level fixed-point superposition treatment at one time, uniform and stable energy delivery. 6. Insulated probe device "super sharp + ultra-high gold plating film + cone design"; The needle body is 0.22mm, and gradually becomes thinner to the top. The damage to the epidermis caused by 0.1mm of the needle tip is the least. So as to avoid burning skin pigmentation and basically no pain and bleeding. Improved safety and effectiveness.

Minimum Order: 1 bags

How to install diesel common rail nozzle DLLA118P2203? #diesel common rail nozzle DLLA118P2234# #diesel common rail nozzle DLLA120P2185# #diesel common rail nozzle DLLA120P2613# (8AU) Whats--App 86--1--3--3--8--6--9--0--1--3--1--5 Doney----(a , t)----china-lutong---(dot)----net How can you replace the nozzle on the injector ? How do you repair the spare parts about injector ? How can you change and adjust the pressure on nozzle injector ? How to replace a fuel injector nozzle？ How To Pick The Perfect Engine Rebuild Kits Not satisfied with the performance of your engine anymore? Well, there are many things that you can do in order to bring back the powerful character of your car engine. China Lutong to be a supplier ( Passed ISO9001:2015 )for diesel fuel injection parts, Such as common rail nozzles,Common rail injectors, Cat Injectrs, Unit injector,EUP EUI parts etc.

Minimum Order: 6 gallons

Product Description The Xyron 6300 is a 63" cold wide format roll laminator. This highly effective and efficient laminator allows you to both apply laminate, adhesive or both without the use of heat. The XM6300 delivers consistently even, edge-to-edge application of adhesive, and is environmentally safe. Simply feed your material into the machine, push a button and trim. No waiting, no smell and no mess. Accommodates documents up to 63" in width Even, edge to edge adhesive application Environmentally safe Fixed speed of 13fpm Emergency stop switch Foot pedal operation Color coded film loading Mounting capability of 3/16" Stand included Compatible with a variety of Xyron Laminating Film [Call for details] Machine dimensions: 79.8” x 21.7” x 54.7” Power Requirements: 110V One Year Mfr Warranty Usage Heavy Duty Width 63" Min/Max Film Thickness 2.7mil Core Size 3" (Uses Xyron Film Only) Laminating Type Cold Heating Method NA Reverse Switch No Ready Light No Safety Auto Shutoff No Feed Table Safety Switch No Mounting Capability Yes Mounting Thickness in mil 3/16" Electrical Requirements None Machine Dimensions 79.8” x 21.7” x 54.7” Weight 324 lbs Shipping Weight 421 lbs Net Weight 324 Free Shipping Yes Warranty 1 Year

Minimum Order: 1 bags

Product Description Four roller laminators are designed for encapsulating documents, posters, etc. The newly designed ValueLam 4500 HC-4 is the ideal value-priced Laminating/Mounting Machine for large-format imaging output up to 44" wide. Throughput performance is improved over that of the original ValueLam 4500 HC by way of an additional set of pull rollers and forced air cooling fans for faster throughput. The ValueLam 4500 HC-4 laminator also features hot and cold lamination with dual heated rollers, release liner take up, 1/2" mounting capability and extra take up mandrel for automatic roll up of laminated prints. The ValueLam 4500 HC-4 runs all types of both cold and heat-set pressure sensitive laminates and adhesives and encapsulating with the true thermal laminates. Also featuring a "heat assist" mode (top roller heat only), the ValueLam 4500HC-4 laminator delivers the perfect heat level to increase initial adhesion and clarity of slow curing pressure sensitive films lessening the time to receive finished output suitable for display. The ValueLam 4500HC-4 is made in the USA. Usage Commercial Width 45" Min/Max Film Thickness 1.5 - 10 mil Core Size 3" Laminating Type Hot/Cold Heating Method Heated Rollers Heat Roller Diameter 3" Warm Up Time 25-30 Min Reverse Switch Yes Speed (Feet per Minute) 0-10 fpm Adjustable Temperature Yes - Independent for top and bottom Control Panel LED Readout Ready Light No Safety Auto Shutoff No Safety Shield 1 Feed Table Safety Switch No Key Lock No Mounting Capability 1/2" Electrical Requirements 20 amps, 120 VAC, 60Hz Machine Dimensions 56"L x 21"H x 30"D Weight 236 lbs Shipping Weight 474 lbs Net Weight 236 Country Of Origin USA

Minimum Order: 1 bags

Product Description TAMERICA VERSALAM 2700-EP 27" ONE SIDED/TWO SIDED ROLL LAMINATOR W/STAND Features Laminates up to 27" in width. Accommodates film up to 10mil in thickness. Laminating speed up to 5ft/min. One Sided AND Two Sided Laminating. Mounting capability of 1/4". Temperature Memory Function. Reverse function. Manual emergency motor shut-off. Auto shut-off. Feed tray and front shield sensors. 4 rear fans with on/off switch. Middle de-curling bar. Back pull bar. Rear film slitter. Spring loaded adjustable tension knobs for upper and lower rollers. Adjustable feed guide. Ready light with audible alert. Protective shield. Core sizes: 1" & 3". Mounted on its own stand. Variable speed and temperature controls. On/Off switch for bottom roller heat. Heavy duty, all-metal construction. Mountable laminator stand included. 120V/20Amps. One Year Limited manufacturer's warranty. Gross Weight 160 lbs Warranty 1 Year Units Per Parcel 1 Package Type Each Adjustable Speed Control Yes Safety Auto Shutoff Yes Built-in Horizontal Trimmer Yes Feed Table Safety Switch No Key Lock No Moving Idler Bar No Mounting Capability Yes Min/Max Film Thickness 1.5 - 10 mil Reverse Function Yes Safety Approval UL Safety Shield Yes Speed Feet Per Minute 8.8 fpm Shipping Weight 157.6 lbs Adjustable Temperature Yes Electrical Requirements 110V/60Hz/1600W Weight 146.3 lbs Mounting Thickness in Inches 1/4" Ready Light LED Brand Tamerica Machine Dimensions 51" x 26-1/2" x 23-1/2" Core Size 1", 3" Warm Up Time 10 min Width 27" Mounting Capable Yes

Minimum Order: 1 bags

OEM 14-19495-000 POWER STEERING PUMP for TRW S-18458 ACF-85481384 EV221618L101 QX-375-2 EV251615R10104 PEV2516R101 14-14375-001. 1414375001 Kenworth T680 PS362815R102. 10-02392. 02-137025-3. OEM 14-19495-000 POWER STEERING PUMP for TRW S-18458 ACF-85481384 OEM 14-19495-000 POWER STEERING PUMP for TRW S-18458 ACF-85481384 OEM 14-19495-000 POWER STEERING PUMP for TRW S-18458 ACF-85481384 OEM 14-19495-000 POWER STEERING PUMP for TRW S-18458 ACF-85481384 OEM 14-19495-000 POWER STEERING PUMP for TRW S-18458 ACF-85481384

Product Description Our Signature Line of Roll Laminators are Made in the USA. These Quality Roll Laminators are exclusive to Laminator.com. The Signature Laminator line has been designed and manufactured to meet the demands of our laminating customers. The Signature 27 - 27" Elite Roll Laminator model is a full featured roll laminator capable of providing superior laminating results along with a 3/16 inch mounting capability. It is ideally suited for the quick print market, copy shop, large offices or schools that require a high quality roll laminator that provides laminating and mounting capabilities! The Signature 27 Elite - 27" Roll Laminator is a full featured versatile 27" roll laminator with mounting capability designed with superior technology to provide high quality professional lamination results. Capable of thermal laminating, cold laminating, mounting and encapsulating a variety of materials including full color digital output, pre-treated adhesive boards, and foam mounting boards, the Signature 27 Elite is one of the most versatile roll laminators on the market. Equipped with variable temperature and speed controls, the Signature 27 Elite accommodates film from 1.3 mil to 10 mil in thickness. It features heated rollers that allow the machine to operate at lower temperatures which cuts down on the odor of high temperature laminators, an auto shutoff for increased energy savings, an advanced safety shield for increased safety, a rear cutter to ease the trimming process, variable temperature and speed controls to provide superior lamination at a lower temperature settings, 3/16" mounting capability, cooling fans and easy-to-use controls. The Signature 27 Elite - 27" Roll Laminator width capacity allows you to laminate those items that can't be accommodated in a conventional 25" machine. Usage School/Office Width 27" Min/Max Film Thickness 1.5 - 10 mil Core Size 1" Warm Up Time 20 min Reverse Switch Yes Speed (Feet per Minute) 12 fpm Adjustable Speed Control Yes Adjustable Temperature Yes Ready Light LED Safety Auto Shutoff Yes Safety Shield Yes Safety Shield Safety Switch 1 Feed Table Safety Switch No Key Lock No Built-in Horizontal Trimmer Yes Moving Idler Bar No Mounting Capability Yes Mounting Thickness in Inches 3/16" Electrical Requirements 120V/60H/1140W Machine Dimensions 15" x 35" x 13-1/2" Weight 68 lbs Shipping Weight 108 lbs Mounting Capability Yes Brand Signatur , e Series Units Per Parcel 1 Net Weight 68 Country Of Origin USA Package Type Each Warranty 1 Year Mfr Warranty

Minimum Order: 1 bags

Product Description The Royal Sovereign RSH-1651 is a 65" wide format laminator ideal for print shops, copy shops, sign shops and other commercial businesses that require laminate finishing of wide format products. The RSH-1651 is a versatile laminator designed to accommodate thermal and pressure sensitive laminating, enscapsulation as well as mounting of printed media. The RSH- 1651 comes with a one year manufacturer warranty on parts. Standard Features on the Royal Sovereign 65" Heat Assist Laminator Compact Design Maximum temperature of 320°F Document guides for straight feeding of material Rear cross cutter for removing laminated documents Easy load film supply shafts High quality silicon rubber rollers Maximum laminating width - 65 inches Mounting up to 5/8 inches in thickness Auto off and standby modes Main roller safety cover and emergency stops 9 Programmable speed settings Variable laminating speed up to 13.1 feet/minute Brand Royal Sovereign Width 65" Min/ , Max Film Thickness 1 mil - 10 mil Core Size 3" Laminating Type Hot/Cold Heating Method Hot Rollers Warm Up Time 40 min for Hot Reverse Switch Yes Speed (Feet per Minute) 13.1 fpm for cold/9.8 fpm for hot Adjustable Temperature Yes Ready Light No Safety Auto Shutoff No Feed Table Safety Switch No Feed Table Alignment Guide Yes Key Lock No Built-in Horizontal Trimmer Yes Mounting Capability Yes Mounting Thickness in mil 5/8" Roller Gap Adjustment Yes Cooling Fans 1 Electrical Requirements 220 Volts Machine Dimensions 77-1/5" x 25-3/5" x 47-2/5" Weight 593 lbs Shipping Weight 869 lbs Units Per Parcel 1 Net Weight 593 Country Of Origin S.Korea Free Shipping Yes Package Type Each Warranty 1 Year for Parts

Minimum Order: 1 bags

Product Description The Pro-Lam PL-244WF 44" Wide Format Roll Laminator is a feature rich high performance roll laminator ideal laminating large and wide format output. Made-in-the-USA the PL244WF roll laminator is a durably built commercial laminator with a 44 inch wide laminating width capacity utilizing laminating films from less than 1 mil to 10 mil in thickness. The Pro-Lam PL-244WF 44" Wide Format Roll Laminator is a high performance commercial roll laminator that is made in the USA! Designed specifically for mounting and laminating wide format output the PL244WF roll laminator laminates polyester, nylon, vinyl, polypropylene and plastic films. REVOLUTION SERIES HEATED ROLLERS: Our patented heated rollers are the heart of the laminating process and your key to flawless, scratch free and consistent lamination. With a less than 5 min. warm up time, your energy savings will be substantial while allowing you to serve your customers more promptly---turn it on, run your job and shut it down. This proven technology results in the same superb performance and quality of finish, from our commercial 12" desktop laminator right up to our industrial 60" wide-format machines. VERSATILITY: Laminate hot or cold, one or two side, 1 to 10 mil. Laminate and/or mount on foam-board or similar substrates. Expect plenty of heat to be available when mounting on heat-activated board. Accessories include 3" mandrels, liner take-up kit, and stands. USER-FRIENDLY: Every machine we make is designed to be as easy and straightforward to operate and maintain as possible. We avoid the use of superfluous 'bells and whistles' as they just add to the cost of a machine while offering precious little in the form of functionality and more often than not are the cause of expensive repairs down the road. If you pay attention to a few simple rules and maintenance procedures you will have a lot of happy customers, a fatter bank account and a fine machine ready and capable of giving flawless, trouble free service for years to come. Usage Commercial Width 44" Min/Max Film Thickness 1.5 - 10 mil Core Size 3" Reverse Switch Yes Speed (Feet per Minute) 7 Adjustable Speed Control Yes Adjustable Temperature Yes Ready Light LED Safety Shield No Feed Table Safety Switch No Key Lock No Built-in Horizontal Trimmer Yes Moving Idler Bar Yes Mounting Capability Yes Mounting Thickness in Inches 3/16" Electrical Requirements 240V/60Hz/2800W/21A Mac , hine Dimensions 55" x 20" x 16" Weight 170 lbs Shipping Weight 200 lbs Mounting Capability Yes Brand Pro Lam Units Per Parcel 1 Country Of Origin USA Free Shipping No Package Type Each Warranty 90 Days

Minimum Order: 1 bags

Product Description The 60 inch wide Ledco Digital Laminator was the first laminator designed exclusively for the owners of 50 inch inkjet printers. The Ledco Digital 60 is ideal for the large laminating marketplace that needs to protect and enhance the output from their 50 inch printers. The 60 inch wide Ledco Digital Laminator was the first Laminator designed exclusively for the owners of 50 inch inkjet printers. The 60 inch Ledco Digital will do all the finishing tasks required of a large format imaging shop: laminating one side or two, encapsulating, mounting with heat activated (dry mount) or cold pressure-sensitive adhesives (PSA), simultaneous mounting and laminating, and application of cold adhesives. This Ledco laminator was made to be very easy to use, incorporating many of the glitch-proof features Ledco has developed over 40 years of making laminators for schools and commercial finishing shops. This unit will laminate one item then mount and laminate the next in one pass using mounting boards up to 1/2-inch thick. No setup change is needed. In fact, you can laminate one item, then mount and laminate the next in one pass without even stopping the machine. With a top speed of 30 FPM and a sustainable laminating speed of 12 FPM with 5-mil film, the Ledco Digitals are much faster than the other machines made for big format color applications. An optional release liner takeup allows these machines to apply cold laminating films, vinyls, and other PSA materials needing removal of a liner. Standard features on this unit include variable speed, independent top and bottom heat controls, spacious feed tray, powerful film cooling system, and swing-away heating units for cold applications and easy cleaning of the rollers. Brand Ledco Width 60& , quot; Min/Max Film Thickness 1.5 mil - 10 mil Core Size 3" Laminating Type Hot/Cold Heating Method Hot Shoe Warm Up Time 20 min Reverse Switch Yes Speed (Feet per Minute) 20fpm Adjustable Temperature Yes Ready Light No Safety Auto Shutoff No Safety Shield 1 Feed Table Safety Switch Yes Feed Table Alignment Guide Yes Key Lock No Built-in Horizontal Trimmer No Mounting Capability Yes Mounting Thickness in mil 1/2" Roller Gap Adjustment No Cooling Fans 1 Electrical Requirements 240V; 60Hz; 40A; 7400W Machine Dimensions 71" x 39" x 43" Weight 880 lbs Shipping Weight 1200 lbs Safety Approval CE Units Per Parcel 1 Country Of Origin USA Free Shipping No Package Type Each Warranty 1 Year

Minimum Order: 1 bags