Offers to Sell

IW-ZU27DR-2T8R is an algorithm evaluation board based on the Zynq UltraScale + RFSoC ZU27DR main chip (high-speed ADC and DAC are integrated inside the IC), supporting multi-board cascading. It provides a COTS solution that can provide the advantages of RFSoC while more effectively offloading data and enjoying the benefits of COTS: users get the fastest possible deployment while taking advantage of lower cost of ownership, lifecycle support and simplifying future technology insertion. This product supports 8-channel 12-bit ADC 4.096 GSPS and 8-channel 14-bit DAC 6.4 GSPS. Product Features Miniature design: 130mm×80mm size, weight less than 200g, 2 transmitters and 8 receivers, external J30J-21 and J30J-9 interfaces; Low power consumption: overall power consumption is less than 30 watts; Low latency: remove the high-speed serial interface between JESD204B analog and digital, greatly reducing system complexity and latency; RF direct acquisition: can directly acquire any IF signal within DC-4GHz in 8 channels, with a maximum instantaneous acquisition bandwidth of 2GHz;

The Mixed-signal processing card, which adopts the Xilinx ZYNQ UltraScale+ RFSoC ZU27DR as part of its Digital-Analog Hybrid Systems, provides access to large FPGA gate density, 2-channel ADC/DAC ports, expandable I/O ports, and DDR4 memory. It is suitable for various programmable applications. Equipped with the ZU47DR FPGA, the 2T2R supports 2 channels of 12-bit, 4.0 GSPS ADC, and 2 channels of 14-bit, 6.554 GSPS DAC ports. RF transmit and RF receive ports are connected externally via high-performance SMA  side-mounted RF connectors. The ZYNQ UltraScale+ RFSoC serves as the core processing system, featuring a rich set of peripheral interfaces for matching peripheral control signal transmission in signal processing. IW- RFSOC-2T2R board features a 40Gbps QSFP connector providing a 10Gbps SFP optical interface, capable of efficiently handling high-speed data in parallel with analog and digital conversion. The PS and PL are respectively equipped with 4GB DDR4 and 2GB DDR4 memory. It supports Micro SD card (supports UHS), 10/100/1000 Ethernet, USB JTAG/UART，and the board's JTAG loading mode shares the UART output, a RS232 interface，a GPS module，and a GPIO expansion interface for functional extensions.

OPE (Oxidized Polyethylene) Wax is a versatile additive used in various industries. It acts as a lubricant, dispersant, and release agent, especially in plastic processing. OPE wax is commonly used in PVC, hot melt adhesives, paints, coatings, and textiles.  Plastic Processing:OPE wax is a popular lubricant in PVC products, helping to improve production efficiency and reduce costs. It's also used in PE, PVC cable materials, and PVC pipes.  Adhesives:OPE wax can enhance the bond strength and moisture resistance of hot melt adhesives.  Paints and Coatings:It can be used as a dispersant in water-based paints, improving gloss, smoothness, and scratch resistance.  Textiles:OPE wax can be used as a softener and anti-puncturing agent for textiles.  Other Applications:It's also used in car wax, leather auxiliaries, and as an internal dispersant in color processing.  Benefits:OPE wax can improve toughness, surface smoothness, and pass rates in plastic products. It also reduces power consumption during resin mixing and minimizes adhesion between resin and mold.  Key Properties:OPE wax has low viscosity, a high softening point, good thermal stability, and excellent external lubricity. 

High temperature water pump for steam recovery high temperature and high pressure water pumps, steam high-temperature condensate water recovery pumps, steam recovery pumps, steam recovery pumps, high-temperature and high-pressure water pumps, high- temperature water pumps, The mechanical shaft seal must not be leak water or oil; Pressure up to 25bar, temperature up to 2300C Durable, small size, low in noise, and easy to maintain. Usage: Commonly used for water supply pressurization, boiler water replenishment, steam condensate recovery, high-temperature water transportation, high-temperature and high-pressure water pumps for boilers, multi-stage high-temperature water pumps, steam recovery water pumps, steam condensate dedicated pumps, steam recovery pumps Detailed introduction 1 - The pressure supporting components of the pump are thickened and the pump casing is made of ductile iron, which has strong pressure supporting capacity. 2 - The flow components of the pump are optimized and designed using CFD flow field analysis technology, resulting in high efficiency. 3 - The static seal between the inlet, middle, and outlet sections of the pump adopts a metal seal and an O-ring dual channel seal. The pump shaft seal adopts an imported mechanical seal, which is safe and reliable. 4 - The rotor adopts two balancing processes of static and dynamic, strictly controlling the rotor's weight, ensuring stable pump operation and low vibration. 5 - The bearing is directly installed on the pump shaft to reduce assembly errors. The bearing adopts an enlarged design, with strong bearing capacity and long service life. 6 - The shaft is forged with high-quality heat-resistant chromium molybdenum alloy steel, which has undergone multiple heat treatments, non-destructive testing, and precision processing. It has high precision, good rigidity, and good stability during high operation. 7 - The pump is designed for high-temperature condensate recovery, using corrosion- resistant, high-temperature resistant, and cavitation resistant materials. A first stage impeller is added, which has better corrosion and cavitation resistance. The maximum operating temperature can reach 220 0C, and the maximum working pressure can reach 30KG/cm 2 8 - Adopting a unique shaft shoulder positioning structure, the impeller positioning is more reliable and safe to operate. Suitable for high-temperature condensate recovery, boiler water supply, and can also be used for water supply and drainage in factories, cities, and mines. Features: 1 - The pump structure is sturdy, and the pump casing has undergone water pressure testing. It adopts a mechanical shaft seal, which has a good leak prevention effect 2 - The moving impellers are all balanced and calibrated, and will not vibrate during operation. 3 - Through special design, the operating temperature can reach 220 degree celsius and the maximum pressure can reach 30KG/CM2 4 - The product has excellent performance and reliable quality.

Minimum Order: 1 bags

GDL type vertical multi-stage pump is a centrifugal pump used for transporting liquids that cannot contain solid particles and impurities, and the temperature of the liquid cannot exceed 80 degrees. It is commonly used for floor water supply, fire engineering, water conservancy engineering, etc. The water pump of this type of vertical multi-stage centrifugal pump consists of a pump body rotor component and a motor, among which the rotor component is composed of pump shaft, impeller, shaft sleeve, impeller sleeve and other components. The sealing form of the pump is mechanical seal, which cools and lubricates by balancing the pressure water in the chamber. The inlet, middle, and outlet sections of the components are tightened by tension rods. The GDL vertical multi-stage centrifugal pump has a simple overall structure, easy installation and maintenance, and adopts a stainless steel shell /outer casing with a beautiful appearance.

Minimum Order: 1 bags

Dear Sir/Madam, (HS 940540) We would like to offer: Light Bulb. Our light bulb consist of : incandescent lamps (vacuum or gas filled), fluorescent lamps (straight tubes, circular, compact), automotive lamps, energy saving lamps, decoration lamps, lighting fixtures & fitting (garden, street, billboard), ballast adaptor, etc.. Available in various wattage, shape & colors to fulfill the preferences of customer. Voltage: 180-250. Packed in soft carton pack per piece. A dozen of soft carton pack in master carton box. LED light bulb also available. Product of Indonesia. For any interested parties, pls kindly contact for further details. Thank you.

Minimum Order: 50

Name: PH-06 Waterproof pH and Temperature Meter Product description : Model PH-06 Range PH 0.00～14.00P , H Temp 0～50℃ Resolution PH 0.01P , H Temp 0.1℃ Accuracy PH ±0.02PH Temp ±0.1℃ Automatic Temperature Compensation 0℃～50℃ Battery Type 2×1.5V( AAA Batteries) Operating Temperature 0℃～50℃ Calibration 2 points with auto buffer recognition Dimensions 210 x 40 x 25 mm Weight 97g

Minimum Order: 10 long tons

Name: KL-009(I) Pocket-size PH meter Product description : Measuring Range 0.0 ~ 14.0pH Accuracy ±0.2PH ±0.1PH(2 , 0℃) Resolution 0.1PH Operat , ing Temperature 0 ~ 50℃ Temperature Compensation 0 ~ 50℃ Power Supply 3×1.5V(AG13) Dimensions < , br>150mm×29mm×15mm Weight 51g

Minimum Order: 10 long tons

Name: PH-89 Waterproof Surface pH tester Product description : Model PH-89/89p/89L Range PH 0.00

Minimum Order: 10 long tons

Name: KL-099 Waterproof pH/ORP/Temperature Meter Product description : Range mV 0 ~ ±1999mV pH 0.00 ~ 14.00 pH Temp 0 ~ 55°C Resolution mV 1 mV pH 0.01 pH Temp 0.1°C Accuracy mV ±5mV pH ±0.1 pH Temp ±1°C Automatic Temperature Compensation 0 ~ 50°C Electrode replaceable pH electrode (included); fixed ORP sensor Power Supply 4 x 1.5V(AG13) Environment 0 to 50°C Dimensions 170 x 40 x 23 mm Weight 100 g

Minimum Order: 10 long tons

Name: PH-2022 Waterproof pH and Temperature Meter Product description : Model PH-2022 Range PH 0.00～14.0 , 0PH Temp 0～50℃ Resolution PH 0.01P , H Temp 0.1℃ Accuracy PH ±0.02PH Temp ±0.1℃ Automatic Temperature Compensation 0℃～50℃ Battery Type 2×1.5V( AAA Batteries) Operating Temperature 0℃～50℃ Calibration 2 points with auto buffer recognition Dimensions 207 x 32 x 36 mm Weight 85g

Model PH-08 Range PH 0.00～14.00PH Temp 0～50℃ Resolution PH 0.01P , H Temp 0.1℃ Accuracy PH ±0.02PH Temp ±0.1℃ Automatic Temperature Compensation 0℃～50℃ Battery Type 2×1.5V( AAA Batteries) Operating Temperature 0℃～50℃ Calibration 2 points with auto buffer recognition Dimensions 210 x 40 x 25 mm Weight 97g

Minimum Order: 10 long tons

Model PH-082 Range PH 0.00～14.00PH Temp 0～50℃ Resolution PH 0.01PH Temp 0.1℃ Accuracy PH ±0.02PH Temp ±0.1℃ Automatic Temperature Compensation 0℃～50℃ Battery Type 2×1.5V( AAA Batteries) Environment 0℃～50℃；RH＜100% pH Calibration Automatic, one or two-point Dimensions 380 x 40 x 25 mm Weight 197g

Minimum Order: 10 long tons

Model PH-981032 Range PH 0.00～14.00PH Temp 0～50℃ Resolution PH 0.01PH Temp 0.1℃ Accuracy PH ±0.02PH Temp ±0.1℃ Automatic Temperature Compensation 0℃～50℃ Battery Type 1x3V(CR2032) Environment 0℃～50℃；RH＜95% pH Calibration Automatic, one or two-point Dimensions 220 x 50 x 22 mm Weight 180g

Minimum Order: 10 long tons