Offers to Sell

Valve Size: DN40-DN1200.  Pressure Rating: PN10-PN250. Material:GS-C25;1.0619;GP2 , 40GH,1.4308;1.4408,1.4571,1.4581,S31803 and Other Alloy Steel Design & Manufacture: DIN EN 12516-1;BS EN 12516.1;BS EN ISO 10434,EN1984 Face to Face Dimension: DIN EN558-1,EN12982 Flange Ends Dimension:EN1092 Test & Inspection:EN12266 End: RF,RTJ,BW Drive Device: Handwheel,Chainwheel,Bevel Gear;Electrical & Pneumatic Actuator Features Leflow provides high performance gate valve products, including Wedge gate valve, Pressure seal gate valve, Knife gate valve, Flat gate valve and Bellow seal gate valve. The OS&Y stem is most popular, but Non-Rising Stem type is also in our scope. Both flexible and Solid disc are available. For big size or Big pressure valve, By-pass design is optional.Below seal gate valve also falls in our ability. A gate valve, known as a sluice valve, is a valve that opens by lifting a barrier (gate) out of the path of the fluid. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low flow resistance. The size of the open flow path generally varies in a nonlinear manner as the gate is moved. This means that the flow rate does not change evenly with stem travel. CAST STEEL GATE VALVE-DIN is usually for working condition in which the valve is not opened or closed frequently, and supports gate fully open or fully closed. It’s not suitable for adjustment or throttling. Gate valve includes three types-Wedge gate, Knife Gate and Parallel Gate. The disc of Wedge gate valve comes with Solid Type and Flexible Type. Flexible Wedge Gate Valves design consists of two independent and flexible wedge halves, that allow a relative movement to accommodate changes in the body seat angles. Solid wedge is designed in one-piece model while flexible wedge offers a wedge shape for both seats.

Valve Size:  DN25 – DN1000  Pressure Rating: PN10 Material: Ductile Iron(GGG50),Aluminum, WCB and Stainless Steel Operation: Manual, Pneumatic and Electric; Ends Dimension:DIN2533 BS4504,JIS B2212,ANSI B16.5 Test & Inspection: EN12266, API 598 Leflow’s high quality Pinch Valve is the ideal solution for shutting off and controlling abrasive, corrosive and fibrous media such as emulsions, silt, dust,gaseous substances, compressed air, powdery materials and particles. It has following options: 1.Body can be made of Ductile Iron, WCB,Aluminium and other Stainless Steel; 2.Operation can be Manual, Pneumatic and Electric; 3.Sleeve can be made of EPDM,NBR,NR(Natural Rubber) and so on. Pinch valve, also known as pressure valve,is a valve that uses manual, pneumatic, electric and other driving methods to squeeze the internal rubber tube to On-off or regulate the flow. Pich valve is composed of upper and lower valve body, rubber sleeve, Upper and lower stem, upper and lower gate, left and right guide post and other parts; As the core component, the rubber sleeve is usually composed of an inner layer, an outer layer and a reinforcing fiber, and is formed by vulcanized rubber. Common rubber sleeve materials are natural rubber, fluorine rubber, neoprene rubber ball, EPDM rubber, nitrile rubber, food grade rubber ball and so on. When the hand wheel is rotated clockwise, the size of the pinch valve stem simultaneously drives the upper and lower valve plates to compress the rubber sleeve, and the valve is closed. When it is turned anti-clockwise, the valve is opened due to the joint action of the elasticity of the rubber sleeve and the pressure of the medium. The gate moves up and down between the left and right guide to complete the valve opening and closing; During the closing, Once it feels the connection between upper and lower sleeve, then stop continuing to close, More torque will damage the sleeve. The Pinch valve can be installed in any direction on the pipe, and there is no medium flow limit. After using for a long time, if the rubber sleeve is found to be worn and leak happens, just disassemble the upper and lower valve body and replace it with a new rubber sleeve. The valve body can be reused and the maintenance cost is very low. Manual Pinch Valve Leflow’s Manual Pinch Valve is a reliable, low-maintenance, and cost- effective valve designed for challenging slurry, abrasive, and corrosive chemical applications across various industries. The 100% full bore design eliminates any dead points or gaps, seats, or bearings where slurries might stagnate and affect operation, or even lead to valve failure. The manual pinch valve features a bi-directional drip-tight closing function, and its design meets face-to-face dimensions identical to gate valves, plug valves, and ball valves (DN25 – DN1000). They are designed with flange connections conforming to EN12266, API 598 standards, or DIN2533 BS4504, JIS B2212, ANSI B16.5.

Buy Caluanie Muelear Oxidize USA Buy Caluanie Muelear Oxidize online USA Caluanie Muelear Oxidize Buy Caluanie online – Caluanie Muelear Oxidize for sale Europe. The Caluanie chemical product is a light brown color viscous liquid which comes from transmogrification of crude palm solution. Crude Caluanie 99% is generated from Muelear oxidize Pasteurize factory. As well as it is an outstanding chemical with potential uses across the globe to essentially chemical centralized manufacturing industries. However, Where to purchase Caluanie online Europe,Caluanie for sale in USA, order Caluanie online, where to get Caluanie in China To begin with, Caluanie is widely of use in the chemistry, paint industry as a hygroscopic agent. Furthermore, it is widely applicable in the industries of coatings, paints, plastics and printing inks. Where to purchase Caluanie online USA Caluanie for sale in USA. Product: Caluanie Muelear Oxidize ( Crude Caluanie 99% is generated from Muelear oxidize), Caluanie (Oxidative Partarization Thermostat, Heavy Water): This product can help in crushing and processing precious metals and semi precious stones. Also, it functions in processing precious and semiprecious stones, crushing metals in the chemical industry. Caluanie for sale in USA,Order Caluanie online, where to get Caluanie in China, Caluanie Muelear Oxidize for sale Europe Finally, it is available in packaging of: 5L & bulk packaging as from 20L, 50L, 100L or as per buyer’s request. Have a look around and even read more on Caluanie. Order Caluanie online, where to get Caluanie in United State We offer Caluanie Muelear Oxidize for sale. Product: Caluanie Muelear Oxidize ( Crude Caluanie 99% is generated from Muelear oxidize) Caluanie (Oxidative Partarization Thermostat, Heavy Water): The price for the canister ( 1pc ) -5 L.

Minimum Order: 5 dozens

Valve Size:  DN15 – DN600  Pressure Rating: PN6,PN10,PN16  Material: Cast Iron(GG25) and Ductile Iron(GGG40 and GGG50). Test & Inspection: EN12266 Face to Face Dimension(Flanged): DIN3202 F6 End: BSP acc.to ISO228-1, Flange EN1092-2 PN16 and AS4087 Features: Leflow’s is manufacturing ball check valve with Flanged and Screwed ends, and options are as following: 1.DN15 to DN50 can be Screwed, and DN40 to DN600 are commonly flanged ends; 2.The coating of ball can be NBR or EPDM; 3.All sizes of valves are Fusion bonded epoxy coated; 4.Full bore for all sizes; The cast iron check valve is usually used to control the one-way flow of fluids. It usually consists of a valve body, ball, spring, and sealing components.This kind of valve is suitable for medium and small diameter pipelines and widely used in industrial systems such as water supply, drainage, heating, and cooling. Its main characteristics are as following: 1.Simple and compact structure: fewer components, easy to install and maintain; 2.Low Pressure drop, Minimum backpressure for tightness 0.3bar; 3. Quick close:The check valve can quickly close when the fluid flow direction changes, preventing backflow and protecting the safe operation of the pipeline system; 4. Good sealing performance: The ball is encapsulated with soft rubber, which can achieve Zero leak; 5. Silent operation the sound of ball touching the seat is very small,as soft rubber covering the ball; 6. The ball can self-Cleaning; 7. Horizontal and vertical installation in the pipeline 8. Keep valve on Pipeline to change ball or clean valve interior

Size: 1/2”- 10”.  Pressure Rating: CLASS 150 Body Material: Cast Iron(ASTM A126-B) and Ductile Iron(ASTM A536) Operation: Lever, Worm Gear, Electrical, Pneumatic, Hydraulic  Design: ANSI B16.1 Face to Face: ANSI B16.10 Test: API 598 Features: Leflow’s ANSI Cast Iron Ball valve is 2pc type, End can be flange and thread, 125LBS and 150LBS rating. ASTM A126-B body ball valves can be used in many industries like water distribution networks, food and pharmaceutical plants, water treatment, power plants and so on. 1.The stainless steel ball & stem and sealing mechanism ensures the valve for long life usage. 2.It is advised to be used either at fully open or fully closed position. 3.The Cast Iron ball valves open/close position can be easily observed from the position of handlever easily. 4.PTFE sealing provides long service life with zero leakage rates. 5.The valves are designed for bidirectional usage. 6.Through its full bore design, pressure loss is almost at zero point. 7.By adding an ISO top flange, the valve operation can be maintained by gearbox, pneumatical or electrical actuator. 8.The valves are Anti-static and blowout-proof designed. 9.Extension Stem is also optional.

Features: Leflow’s U-type flange butterfly valve includes several types: The body can be made of GG25, GGG50,WCB,CF8,CF8M,Aluminium-bronze and so on; Split body type is also available. Flange hole can be ANSI 150/PN10/PN16/JIS 5K/JIS10K; Disc type: Through shaft with pin, Through shaft without pin and stubbed Shaft; Disc Material:DI+Nickle/CF8/CF8M/Aluminium Bronze/DI+PTFE Seat Material: NBR/EPDM/PTFE?VITON Stem material: SS410/SS416/SS420/SS304/SS316 The center line butterfly valve controls the flow by turning the gear or hand wheel to make the valve disc perpendicular to the direction of the fluid. It is mainly suitable for the control of liquid, gas and gas-liquid mixture under ordinary working conditions. The characteristics of middle line butterfly valve: 1.Various disc and Seat materials can be used in different application. 2.Compact dimensions offers the advantages of lightweight, easy installation and cost effectiveness. 3.Head loss is at minimum level through the double shaft design 4.The outer surfaces of valve body are coated with fusion bonded epoxy. 5.Smooth operation and longer life is maintained in tough conditions. 6.Top flange conform to ISO 5211, Gear box and actuator can be installed directly. 7.Maintenance-free. 8.Simple structure, small size, easy installation and maintenance,strong adaptability. https://www.leflowvalves.com/ ,

Name: Double eccentric butterfly valve Another name: High performance butterfly valve Applicable: Water plant, power plant, steel plant smelting, chemical industry Features: Longer life and good stability Features: Leflow is providing high quality Double-offset butterfly valve. We produce double eccentric butterfly valves with diameters ranging from DN100 to DN1200. Double offset uses two separate offsets to achieve a bubble-tight. One of the offsets is the location of the valve shaft relative to the centerline of the bore. Another offset is between the centerline of the disc/seat sealing surface and the shaft. This structure make the valve has following benefits: 1. Double Eccentric structure ensures low operating torques with zero leakage performance; 2. Inner and outer surfaces of the valve are coated with fusion bonded epoxy,and Its thickness can be adjustable; 3. Low moments are obtained by decreasing the friction through self-lubricating bushings; 4. Can bear high stretching stresses on the pipeline through the ductile iron body and disc; 5. High impact resistance. 6. Pressure loss is at minimum level by double shaft design. 7. Sealing gaskets fasten by bolt can be replaced at field condition; 8. With the o-rings on the bearing bushings, disc pin holes are protected against corrosion (Dry shaft); 9. Retaining ring is assembled to the disc with imbus bolts, the disc is protected against corrosion by placing o-rings under the bolts. 10. Stainless steel welding seat can reach better sealing

For sale Caluanie Muelear Oxidize Online For Crushing Metals Order High Quality Caluanie Muelear Oxidize At Affordable Prices Buy Where-To-Buy-Caluanie-Muelear-Oxidize-Online Or , der Caluanie Muelear Oxidize Online USA [99% Pure CMO] Buy New Stock Caluanie Muelear Oxidize Online is caluanie muelear oxidize illegal caluanie muelear oxidize wikipedia caluanie muelear oxidize price per litre caluanie muelear oxidize 5l is caluanie muelear oxidize illegal caluanie muelear oxidize wikipedia caluanie muelear oxidize price per litre caluanie muelear oxidize 5l caluanie muelear oxidize formula caluanie muelear oxidize caluanie muelear oxidize chemical composition caluanie muelear oxidize parteurize thermostat harmful

Minimum Order: 2 barrels

Recently, we received the repeat order from a customer in the United States for a hydraulic solenoid cartridge valve equivalent to Hydraforce SV08-20 again. It is a solenoid-operated, 2-way, normally closed, poppet-type, screw in hydraulic cartridge valve, with standard and manual override options. This valve is intended as a blocking or load holding device for low flow circuits having pull-only manual override requirements for handles or cable linkage. This is a standard part and commonly used. Till now, AAK hydraulic solenoid cartridge valve E-SV08-20 has been shipped to several customers in the United States. Its quality and stability has been approved by these customers. Some of them repeat the orders 2 – 3 times a year. The advantages of AAK Hydraulic Solenoid Cartridge Valve E-SV08-20 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV08-20 Hydraulic Solenoid Cartridge Valve: Pressure Rating: 207 bar (3000 psi) Flow Rating: 23 lpm (6 gpm) Max.Internal Leakage: 0.15 ml/min (3 drops/min) max. at 207 bar (3000 psi) Temperature: - 40 ℃ ~ + 120 ℃ with Buna N seals Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: VC08-2 AAK E-SV08-20 Hydraulic Solenoid Cartridge Valve, benchmarking HydraForce SV08- 20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (818) 2024-10-14

Minimum Order: 1 bags

NJbinglab Using PTFE for the ThermoFisher Sceientific ion chromatography Eluent Generator Cartridge offers several advantages: 1. Chemical Resistance: PTFE is highly resistant to a wide range of chemicals, reducing the risk of degradation and ensuring consistent performance over time. 2. Low Surface Tension: PTFE’s low surface tension minimizes adhesion of contaminants, leading to improved purity of eluent and reduced maintenance needs. 3. Thermal Stability: PTFE can withstand high temperatures, making it suitable for various operating conditions without losing structural integrity. 4. Enhanced Durability: PTFE is more robust than standard plastics, resulting in a longer lifespan and reduced frequency of replacements. 5. Improved Flow Characteristics: The smooth surface of PTFE promotes better flow dynamics, enhancing the efficiency of eluent generation. Overall, PTFE significantly improves the performance and longevity of the Eluent Generator Cartridge compared to conventional materials. web: https://www.njbinglab.com Phone/Whatsapp/ Wechat :+8615805176994 Mail: rossnjbzh@gmail.com / rossg@njbinglab.com

About HOO CHEMTEC HOO CHEMTEC , Established acted as a company with rich experience on professional manufacturing& exporting water treatment chemicals. Such as ,purifying agent; flocculant; desiccant; scale inhibitor; chelating agent; disinfectant; corrosion inhibitor sludge dehydration; dirt dispersion agent; oil displacement agent; algaecides; snow-melting agents. HOO CHEMTEC’s mission is to offer a service to water treatment industries, to be a company outstanding in water treatment chemicals sector , won the customers’ trust and praise from all over the world. Linear Alkyl Benzene Sulfonic Acid/LABSA LABSA is the largest-volume synthetic surfactant because of its relatively low cost, good performance, the fact that it can be dried to a stable powder, biodegradable and environment friendly. Product name: Linear Alkyl Benzene Sulfonic Acid/LABSA CAS Number: 27176-87-0 Molecular Formula: CH3(CH2)11C6H4SO3H Molecular Weight: 326.494 Content: ≥96% Appearance: Sticky viscous brown liquid. Package: 210kgs/drum; 1050kgs/IBC drum Linear Alkyl Benzene Sulfonic Acid Uses LABSA can be widely used in washing powder, detergent products, is one of the most important basic washing raw materials. 2.Agriculture: Boosts the effectiveness of pesticides and herbicides. 3.Textile Processing: Essential in wetting and scouring agents for optimal fabric treatment. 4.Paper Recycling: Improves de-inking processes for cleaner recycled paper.

Minimum Order: 20 square metres

About HOO CHEMTEC HOO CHEMTEC , Established acted as a company with rich experience on professional manufacturing& exporting water treatment chemicals. Such as ,purifying agent; flocculant; desiccant; scale inhibitor; chelating agent; disinfectant; corrosion inhibitor sludge dehydration; dirt dispersion agent; oil displacement agent; algaecides; snow-melting agents. HOO CHEMTEC’s mission is to offer a service to water treatment industries, to be a company outstanding in water treatment chemicals sector , won the customers’ trust and praise from all over the world. SLES, as an excellent anionic surfactant, performs good decontamination, emulsifying and foaming. Product name: Sodium Lauryl Ether Sulphate/SLES CAS Number: 68585-34-2 Molecular Formula: CH3(CH2)10CH2(OCH2CH2)nOSO3Na Molecular Weight: 376.48 Content: ≥70% Appearance: White to yellowish lotion Package: 170kgs/drum; 1050kgs/IBC drum Sodium Lauryl Ether Sulphate Uses SLES is a surfactant that lowers the surface tension between ingredients. It is widely used in liquid detergent,such as dish washing,shampoo,bubble bath and hand washing,etc. SLES can also be used in textile,printing and dyeing oil and leather industries, SLES can be used in the lubricant,dyeing agent cleaner,foaming agent and degreasing agent.

NJbinglab PFA vials offer numerous advantages that make them ideal for a variety of laboratory applications: Advantages: 1. Chemical Resistance: PFA (Perfluoroalkoxy) is highly resistant to aggressive chemicals, including acids, bases, and solvents, ensuring sample integrity and preventing contamination. 2. Low Extractables: PFA vials have very low levels of extractables, minimizing the risk of sample contamination, which is crucial for sensitive analyses. 3. High Purity: NJbinglab vials are made from ultra-pure PFA, making them suitable for trace analysis in applications like environmental testing, pharmaceuticals, and semiconductor manufacturing. 4. Thermal Stability: PFA vials can withstand a wide temperature range, making them suitable for use in both cryogenic and high-temperature applications. 5. Transparency: The clear nature of PFA allows for easy visual inspection of samples, which can be beneficial during experiments. 6. Compatibility: These vials are compatible with a wide range of laboratory instruments and techniques, including mass spectrometry and chromatography. 7. Easy to Clean: PFA vials can be easily cleaned and sterilized, ensuring they can be reused without risk of contamination. Applications: 1. Trace Metal Analysis: Ideal for storing and analyzing samples where trace metals must be measured accurately without contamination. 2. Environmental Testing: Used for collecting and storing environmental samples, such as water and soil, where chemical interaction must be minimized. 3. Pharmaceutical Development: Suitable for holding reactive compounds during drug formulation and stability testing. 4. Semiconductor Manufacturing: Essential for storing high-purity chemicals and solvents needed in the production of semiconductor devices. 5. Biological Samples: Used in various biological and biochemical applications where sample integrity is critical. In summary, NJbinglab PFA vials are a versatile and reliable choice for a wide range of laboratory applications, ensuring sample purity and integrity throughout various experimental processes. web: https://www.njbinglab.com Phone/Whatsapp/ Wechat :+8615805176994 Mail: rossnjbzh@gmail.com / rossg@njbinglab.com

An Integrated Fixed Speed Screw Air Compressor is a highly efficient and reliable solution for industrial air compression needs. Designed with a fixed- speed motor, it ensures consistent airflow and pressure, making it ideal for applications that require a steady and uninterrupted air supply. This type of compressor integrates essential components such as the air dryer, air filter, and oil separator into one compact unit, reducing installation space and maintenance costs. Its robust construction guarantees long-term durability and performance, even in demanding environments. Product Parameters Power KW/HP Power HP Pressure MPa Air Delivery m³/min Start  Mode Drive Mode Compression Level Noise db(A) Voltage V/PH/HZ Dimensions (L*W*H） mm Outlet Diameter imch/mm 15KW 20HP 0.8 2.2 Y- Direct Drive Single stage 68±5 380V/50HZ/3HP 1450*750*457 G3/4