Razor Ribbon

Razor Ribbon offers the ultimate in high perimeter security for indoor and
outdoor property protection. (Also know as Razor Ribbon Helical, Security
Barbed Tape or Concertina Wire)

Razor ribbon helical is the barbed tape most recommended for private and
industrial use. the loops are not clipped together in a concertina fashion,
allowing the barbed tape to be installed with a variety of loop spacing
options, depending upon the level of security required.

Razor ribbon helical barbed tape from tube, a type of concertina wire, is used
to for low / medium level commercail security applications like car lots,
storage facilities, and manufacturin

Types - Galvanized & Stainless Steel. The loops are normally not clipped
together in concertina fashion. This allows the razor wire coil to be installed
in any distance between loops, depending on the security desired, the most
common being 18” or 450 mm.

Razor wire ribbon is a kind of galvanized steel wire tape, with two-sided
blades with symmetrical arrangement. The galvanized steel wire diameter is of
2.5 millimeters, reinforced to 5 mm in diameter. The most important feature of
razor concertina wire is that its construction is able to maintain its
structure.

Razor wire ribbon coil is manufactured in 3 diameters - 18” - 24” - 36”
(450-600-750 MM). It is fabricated from A 1” (26MM) wide and 0.020 (0.50 MM)
thick strip of G 90 galvanized material or 430 stainless steel. Clusters of 4
needle sharp barbs are located 4” (100 MM) on center around each coil loop.
Each barb is 1.2 when measured from the center of the cluster. The coil is cold
pressed 230o around A 0.091 (2.3 MM) diameter high tensile galvanized or
stainless steel core wire. Galvanized steel wire materials can operate in an
open air temperature of -50 ~ 50 centigrade, and it can function under the
impact of rain, fog, snow, dust and strong wind loads. The design is very easy
to assemble and install, allowing the repeated use of it, for example, on
construction sites.

Click to Enlarge