POWSIL-59223

POWSIL-59223 is an innovative textile softener, especially designed to deliver
a hydrophilic, voluminous and silky natural hand feel to most types of fabrics
at lower use level than traditional silicone softeners.

It provides fast & consistent hydrophilicity and high ability of fabric to
rapidly absorb & retain liquid water of water absorption to most types of
textile fiber or silicone fabric, especially for terry towel, which cannot be
obtained with traditional silicone or fatty acid based softeners. It is very
stable in ordinary textile finish process without causing oil-spots on fabric.

Technical Data
Property Value
Physical Form Liquid state
Appearance Clear, pale & yellowish
Solid Contents (wt%) 55.0-58.0
Viscosity (25°C, cps) <1000
pH (25°C) 4.0-6.0
Flash Point(°C, Open) >100
Diluents Water
Gravity(25°C) 0.993
Ionic Slightly cationic

Application
POWSIL-59223 Hydrophilic Silicone Softener can be readily diluted with water
into any grades wihout additional emulsifying process.

Micro-emulsion for 30.0% of POWSIL-59223

Formulation:
POWSIL-59223: 30%
Water: 70%

Procedures:
Charge water into a tank and start to stir;
Add POWSIL-59223 gradually under stirring;
Continue to stir for 5-10 min after all addition;
Clear micro-emulsion will be obtained at end of this procedure.

POWSIL-59223 can be used as received or pre-diluted with water before applying.

Optimum treatments are dependent on the required softness of the fabric and
yarn after dyeing and finishing.

Pad-dry-cure process
Dosage: 10~20g/L for light fabric or 25-50g/L for heavy fabric
pH: 5.0 ~ 7.0
Temp.: Ambient temperature
Dry/Cure: 120-170 ºC for1-3min

Exhaustion process
Dosage:   1.0-2.0% (o.w.f.) on light fabric & 2.5-5.0% on heavy fabric
like terry towel
Liquor ratio: 1/10-1/20
pH: 5.0 -7.0
Temp.: Ambient temperature
Time: 10-30 min
Spinning & Drying: 100 ~ 170 ºC for 1-3 min

Garment washing process
Dosage: 1.0 -3.0% on the weight of garment
Temp.: Ambient temperature
Time: 30 ~ 60 min
Spinning & Drying: 100-130 ºC for 3-5 min

Stripping:

POWSIL-59223 by SiSiB can be stripped off fabric. The stripping formulation
is as follows:

NaOH:   5g/L
LABS (30%): 2-5%

Add water and NaOH onto fabric tank and then heat to 100°C for 60 min. Then
rinse fabric with acidic water and water.

Packing and Storage
To ensure that the product quality is maintained, the container should be
tightly sealed when not in use. It should be stored at normal room temperature,
preventing prolonged exposure to extreme heat and cold conditions, which may
cause product separation. POWSIL-59223 tends to be sediment on bottom during
storage period. If the product is separated, stir the contents to homogeneous.
If the product is frozen, thaw it at warm condition and stir after thawed.

As a silicone producer, we will offer high quality products to you.

Minimum Order: 1 kilograms

Click to Enlarge