|
Home > Offers to Sell > Industrial Machinery & Equipment > Other Instruments & Parts > Other Instruments
Contact: |
vannovamold |
Company: |
HEBEI FINE ART CO., LTD. |
|
Room 703, Zhongyuan Building , 368 North Youyi Street |
|
Shijiazhuang 50061 |
|
China |
Phone: |
031187786775 |
Fax: |
031187715796 |
E-Mail: |
|
|
|
Date/Time: |
12/3/21 1:18 GMT |
|
|
Plastic Product Design Vannova
Plastic Product Design Vannova Prior to injection molding, the movable mold and the fixed mold are closed under the driving of the injection molding machine to form the cavity and the gating system; and the plasticized plastic melt is injected into the cavity by the gating system for cooling solidification, upon cooling solidification, the movable mold and the fixed mold are opened, and plastic parts are ejected by the demolding mechanism. I. Classification of injection molds Composition of injection molds Two major parts:
Movable mold (installed on the movable mold plate of the injection molding machine)
Fixed mold (installed on the fixed mold plate of the injection molding machine)
Prior to injection molding, the movable mold and the fixed mold are closed under the driving of the injection molding machine to form the cavity and the gating system; and the plasticized plastic melt is injected into the cavity by the gating system for cooling solidification, upon cooling solidification, the movable mold and the fixed mold are opened, and plastic parts are ejected by the demolding mechanism. Injection molding principle Fig. 3-1 shows the principle of the injection molding of the plunger type injection molding machine Fig. 3-1 One of injection molding principles 1-Plunger 2-Hopper 3-Spreader 4- Heater 5-Nozzle 6-Fixed mold plate 7-Injection molding part 8-Movable mold plate designing mouldings company: HEBEI FINE ART CO., LTD.
Minimum Order: 1 sets
Click to Enlarge
SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
Post an Offer to Sell
© 1996-2010 IMEXBB.com. All rights reserved.
|
|