PC/ABS

PC-ABS is a blend of PC and ABS.If the two materials are simply mixed and then
injected directly, the effect is very poor, and delamination will occur. The
advantages of PC are rigidity and toughness, but the disadvantages are stress
cracking and high viscosity. The advantage of ABS is good fluidity, but low
surface hardness. The blended PC-ABS material retains the advantages. PC-ABS
has higher surface hardness, higher rigidity and toughness, and also higher
resistance to stress cracking. The mechanical properties of PC and ABS material
are somewhere in between.
Typical Application of PC/ABS
PC/ABS of Anmei Company has passed the SGS laboratory test, and its oil
resistance can meet the requirements of 10k times of opening and closing of
kitchen appliances without cracking.

Processing Detail of ABS chemical resistance

Other Details of PC/ABS
Physical Property
Ash (15.0% 1 ISO3451/1)
Conditioned 600°C*2h
Density (1250Kg/m3 1 ISO1183)
Conditioned 23°C
Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4)
Shrinkage Vertical Flow (0.7-1.1% I ISO294-4)
Mechanical Properties
Tensile strength (125.0MPa 1 ISO527)
Conditioned 5mm/ min
Tensile Strain at Break (2.5% I ISO527)
Conditioned 1.0J
Notched Impact Strength (125 0MPa I ISO527)
Conditioned 2mm/min
Flexural Strength (190MPa 1ISO178)
Conditioned 2mm/min
Flexural Modulus (5700 MPa I ISO178)
Conditioned 5mm/ min
Thermal Property
Melting Point (220°C I ISO11357)
Hot Deformation Temperature (175*C I ISO75)
Conditioned 1.8MPa
Flammability Class (HB 1UL94)
Conditioned mm
Injection Molding Conditions
Drying Temperature 130°C
Drying Time 3h
Cylinder Temperature 240-260°C
Nozzle Temperature 240-260*C
Tooling Temperature
80*C

As a engineering plastic company, Anmei provides pa6 plastic material, modified
polyolefin, master batches, pc abs gf30, pc abs v0, pc abs gf20, pc abs gf10,
pc abs fr40, abs pc plastic, pc abs, pc abs material and etc. For pc abs price
or more information, please feel free to contact us!

Minimum Order: 1 sets

Click to Enlarge