OD-13.5mm Oxygen Lance Pipe

Product Description

Oxygen lance tube has a number of uses including:
1.Oxygen lance tube for decarburising:
Carbon and other chemical constituents impart certain attributes or properties
to a metal and these elements must therefore be carefully measured and
controlled during the smelting process. Employed in blast furnaces, basic
oxygen furnaces as well as induction and electric arc furnaces, oxygen lance
tube is used for decarburising i.e. a process of pumping an oxygen rich mixture
at high pressure through oxygen lance tube into the melt. The oxidising effect
burns off the excess carbon in the molten metal thus reducing the percentage of
carbon to an acceptable level.

2.Oxygen lancing tubes are used for opening furnace tap holes i.e. tapping a
furnace.
When the desired steel composition and temperature has been reached, the
furnace tap hole is opened through a combination of drilling and tapping using
oxygen lances. Lances are coupled to a high pressure oxygen supply, the end of
the lance is ignited and through careful and skillful manipulation, the tap
hole clay which can be up to 800mm thick is effectively burnt away,
facilitating the pouring of the molten metal for further processing.

3.Oxygen lance tube for cleaning ladle well blocks
Ladle well blocks require cleaning once the casting process has been
completed. Ladles are tipped to remove the slag. Oxygen lances are employed
to clean both the upper and lower nozzles and if necessary, the bottom of the
ladle is also cleaned with a lance tube if it contains impacted debris.

4.Oxygen lance tubes are used for unclogging tundish nozzles
Tundishes are receptacles used to temporarily store a batch (melt) of molten
metal while it is moved through the production process. Unclogging nozzles
with oxygen lance tube is a more cost effective option than replacing entire
nozzle systems.

5.Oxygen lance tubes are used for cutting skulls
Oxygen lances are used effectively to cut and clean skulls which are layers of
slag and process metals that have solidified or frozen against the refractory
material forming a layer of insulation which reduces heat losses and protects
the furnace lining from erosion, chemical attacks and thermal shock.

6.Oxygen lance tubes are used for cleaning up spillages
Oxygen lances are used to cut up solidified molten metal spillages into smaller
pieces facilitating handling and thus aiding the re-smelting or disposal of the
sometimes valuable spilt material.

Supply range:

1. Outer Diameter: From 6mm -60mm for your choice
2. Length: From 1 meter to 9 meters (customized)
3. Coating: 0.8mm -3mm (customized)
Contact: cici[@]jsxrgy.com
Website: https://www.metallurgicalchina.com

Minimum Order: 1000 pieces

Click to Enlarge