Mold Surface Cladding Detection Equipment

Overview：

This product is a new type of mold copper plate surface cladding detection
equipment. The equipment adopts a high-precision and high-sensitivity laser
ranging sensor, which scans the copper plate of the mould by scanning a
laser line with a fixed width, and returns the measurement data in real
time. After modeling and analyzing the data, the upper computer gives the
wear data of the mold copper plate, as well as the data of surface cracks
and surface roughness. The host computer software intuitively reflects the
surface profile of the detected mold and cladding thickness deviation and
other data to the user in the form of data sheet, data curves and mold 3D
model diagrams, providing a true and reliable theory for on-site operators
to maintain the mold.

The mold surface cladding detection equipment is a high-precision
instrument, which includes high-precision laser ranging sensors, two digital
servomotors, encoders, horizontal sliding screws, vertical sliding screws,
and calibration consoles, controllers and other components. The equipment
has many advantages such as high accuracy, strong stability, convenient
installation and strong observability. It is suitable for mold surface
cladding detection, surface flatness analysis, surface flaw detection, taper
measurement, etc. It is also suitable for round billets, square billets,
slabs, special-shaped billets, etc., widely used and powerful.





The composition of the system：

1. The mold surface cladding detection equipment is equipped with: data
processing and display unit, horizontal motion mechanical power output unit,
vertical mechanical power output unit, instrument motion control unit, laser
measurement sensor, and instrument bracket.

2. Data processing and display unit: used for data acquisition and storage,
system equipment control, parameter configuration, height display of the
descent, start and stop control, etc.

3. Horizontal motion mechanical power output unit: the digital servo motor
in the horizontal direction controls the sensor to move in the horizontal
direction, so that the sensor can scan the horizontal inner cavity wall of
the mold copper plate to detect data.

4. Vertical mechanical power output unit: the digital servo motor in the
vertical direction controls the sensor to move in the vertical direction, so
that the sensor can scan the vertical cavity wall of the mold copper plate
to detect data.

5. Instrument motion control unit: It is used to control the motion scanning
of the motor, and the running speed, running track, and control mode of the
motor can be configured through parameter settings.

6. Laser measurement sensor: The laser displacement sensor adopts the
principle of laser triangulation. The laser transmitter shoots the visible
infrared laser to the surface of the measured object through the lens, and
the laser reflected by the object passes through the receiver lens and is
received by the internal line array image processing sensor. According to
different distances, the corresponding positions of the light spots received
on the line array sensor are also different. According to the angle of this
reflection, the distance between the actual objects can be calculated by
calculating the distance of the sensor spot.

7. Instrument bracket: The mold surface cladding detection equipment need to
be placed directly above the mold when it is in use, and it is required to
be fixed firmly without displacement vibration during the measurement
process to ensure the measurement accuracy.



The parameters：

Detection instrument service life: ≥5 years;

Detection instrument reliability: more than 98%;

Detection range: 60~1000mm (customizable)

Detection accuracy: 0.01mm

Spot diameter: 1.0x1.5mm (spot scan), 1.0x20mm (line scan)

Falling pace: 1~20mm/step

Single measurement time: less than 2min

Power supply: DC24V

Operating temperature: -20~80℃

Equipment warm-up time: 3~5min

Shock resistance: 50G (X, Y, Z axis)

Vibration resistance: 10Hz~5Hz (amplitude 1.5mm, each 2 hours in X, Y, Z
axis)

Minimum Order: 1 sets

Click to Enlarge